Stored Procedure - How To Make View Name Dynamic
May 8, 2012
Basically, I'm working on a stored procedure which will retrieve data based on study parameter passed. The datasource is 'Views'. The name of the view is same for every study except that there is corresponding study name included. For example the views names are something like this for study abc 'v_abc_form' and for study def 'v_def_form'.
Below is the select statement I'm trying to use by declaring @study variable but not able to succeed. I'm not sure how to make the table name dynamic.
Select C1, C2, C3
From v_@study_form
View 7 Replies
ADVERTISEMENT
Jul 9, 2006
I need im my aplication to meke a "Cursor" in a execution of a stored procedure.
For sample:
In a table with a report definition I have the "Fileds, From, Group, Order " clausulas and I need make a cursor with a contents of this fileds.
How can I do ???
My code:
Declare @idRelat int, @cmd_FROM nvarchar(1024), @cmd_Det nvarchar(50)
SELECT @idRelat = idRelat, @cmd_Det = cmd_DET
FROM Relatórios WHERE Nome = @p_Relat
Declare @Tot_Col smallint, @Tot_Lin smallint, @Campos smallint,
@Aux_Select nvarchar(1024), @Aux_Group nvarchar(1024), @Aux_Order nvarchar(1024)
Select @Tot_Col = 0
Select @Tot_Lin = 0
Select @Campos = 0
Select @Aux_Select = "SELECT " + @cmd_DET + "AS Soma"
Select @Aux_Group = "GROUP BY "
Select @Aux_Order = "ORDER BY "
Declare @a_Local char(1), @a_Linha smallint, @a_Campo nvarchar(50)
Declare cur_Aux insensitive cursor for
SELECT Local, Linha, Campo
From Relatórios_Margens
WHERE (idRelat = @idRelat)
ORDER BY Local, Linha
Open cur_Aux
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
While @@FETCH_status = 0 begin
If @a_Local = "C"
Select @Tot_Col = @Tot_Col + 1
Else
Select @Tot_Lin = @Tot_Lin + 1
Select @Campos = @Campos + 1
If @Aux_Group <> "GROUP BY " begin
Select @Aux_Group = @Aux_Group + ", "
If @Aux_Order <> "ORDER BY " begin
Select @Aux_Order = @Aux_Order + ", "
Select @Aux_Select = sSelect + ", " + @a_Campo + " AS Campo" + @Campos
Select @Aux_Group = @Aux_Group + @a_Campo
Select @Aux_Order = @Aux_Order + @a_Campo
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
End
Select @Aux_Select = @Aux_Select
-- <<<< MONTA COMANDO SQL
Select @Aux_Select = @Aux_Select + " " + @cmd_FROM + " " + @p_Filtro + " " + @Aux_Group + " " + @Aux_Order
Declare @Cursor_Aux cursor
Set @Cursor_Aux = cursor for @Aux_Select
Open @Cursor_Aux
Not working !!!!
View 1 Replies
View Related
Jul 20, 2005
I am trying to create a dynamic SQL statement to create a view.I have a stored procedure, which based on the parameters passed callsdifferent stored procedures. Each of this sub stored procedure createsa string of custom SQL statement and returns this string back to themain stored procedure.This SQL statements work fine on there own. The SQL returned from thesub stored procedure are returned fine. The datatype of the variablethat this sql is stored in Varchar(I have tried using nvarchar alsosame problem).If I have more that 6 SQL statements concated then the main SQL getscut off. It doesnt matter in what sequence I create the main SQL.Here is the Stored procedure/**********************************************//*Main Stored Procedure *//**********************************************/CREATE PROC sp_generate_invoice1 @prev_date NVarchar(1000) ,@prev_month NVarchar(32)ASDECLARE invoice_driver_cur CURSOR FORSelect driversid From Invoice_driversOpen invoice_driver_curDeclare@C VARCHAR(8000),@L_args Varchar(8000),@@sqlstmt Varchar(8000),@L_driverid Int,@L_rowcount IntSET QUOTED_IDENTIFIER ONSET TEXTSIZE 32768Set @L_rowcount = 0-- Drop the previous ViewIF EXISTS (SELECT TABLE_NAME FROM INFORMATION_SCHEMA.VIEWSWHERE TABLE_NAME = 'custom_invoice')DROP VIEW custom_invoiceFetch Next From invoice_driver_curInto @L_driverid-- Create the new ViewSet @L_args = N'Create View custom_invoice As'--Select @L_driveridWHILE( @@FETCH_STATUS = 0)BEGINSet @L_rowcount = @L_rowcount + 1select @L_driveridIf @L_driverid = 2BeginExec sp_invoice_driver2 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @L_args + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 3BeginExec sp_invoice_driver3 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 4BeginExec sp_invoice_driver4 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 5BeginExec sp_invoice_driver5 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 6BeginExec sp_invoice_driver6 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 7BeginExec sp_invoice_driver7 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 8BeginExec sp_invoice_driver8 @prev_date, @prev_month, @@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndIf @L_driverid = 10BeginExec sp_invoice_driver_niku @prev_date, @prev_month, @L_driverid,@@sqlstmt OutputIf @L_rowcount > 1BeginSet @C = @C + ' Union ' + @@sqlstmtEndElseBeginSet @C = @L_args + @@sqlstmtEndEndPrint @CFetch Next From invoice_driver_curInto @L_driveridContinueEndClose invoice_driver_curDeAllocate invoice_driver_curExec (@C)--EXEC sp_executesql @CGO/**********************************************//*Sub Procedure sp_invoice_driver2 *//**********************************************/CREATE PROC sp_invoice_driver2 @args NVarchar(1000), @prev_monthNVarchar(100),@sqlstmt Varchar(8000) OutputASSET QUOTED_IDENTIFIER ONSET @sqlstmt = ' Select 1 SortOrder ,( SELECT Drivers.Description) Description,(BillingReport.Active_Accounts * Cast(Fee.fee_rate As decimal(4,2))) / 12 Amount,Drivers.CurrencyFROM BillingReport, Drivers, FeeWHERE ( Fee.Driverid = Drivers.Driversid ) andDrivers.Driversid = 2 andbillingreport.fromdate = ''' + Cast(@args As NVARCHAR(20)) + '''andfee.currentmonth = ''' + Cast(@prev_month As NVARCHAR(12)) +' '''GO/**********************************************/This is what the Print Statement give:/**********************************************/Create View custom_invoice As Select 1 SortOrder ,( SELECT Drivers.Description) Description,(BillingReport.Active_Accounts * Cast(Fee.fee_rate As decimal(4,2))) / 12 Amount,Drivers.CurrencyFROM BillingReport, Drivers, FeeWHERE ( Fee.Driverid = Drivers.Driversid ) andDrivers.Driversid = 2 andbillingreport.fromdate = '9/1/2004' andfee.currentmonth = 'September ' Union Select 2,(SELECT Drivers.Description),(BillingReport.Zero_Balance * Cast(Fee.fee_rate As decimal(9,2) ))/ 12 Amount,Drivers.CurrencyFROM BillingReport, Drivers, FeeWHERE ( Fee.Driverid = Drivers.Driversid ) andbillingreport.fromdate = '9/1/2004' andfee.currentmonth = 'September' andDrivers.Driversid = 3 Union Select 3,(Select Drivers.Description From Drivers Where DriversID = 4),Count(*) * Cast((select fee.fee_ratefrom fee, driverswhere Fee.Driverid = Drivers.Driversid andfee.currentmonth = 'September' andDrivers.Driversid = 4 )As decimal(6,2)) / 12,(Select Drivers.CurrencyFrom Drivers Where DriversID = 4)From Fund Union Select 4,(Select Drivers.Description From Drivers Where DriversID = 5),(((Sum(BillingReport.Man_Reg_Purch + BillingReport.Man_Reg_Red +BillingReport.Man_Reg_Transexch +BillingReport.Man_Allo_Purch +BillingReport.Man_Allo_Red +BillingReport.Man_Allo_Transexch +BillingReport.Man_Allo_Adj_Purch +BillingReport.Man_Allo_Adj_Red +BillingReport.Man_Allo_Adj_Transexch +BillingReport.Man_Adj_Purch +BillingReport.Man_Adj_Red +BillingReport.Man_Adj_Transexch ) ) +(Select Sum(Cast(satuscnt As int ))From Awd_stubWhere CurrentMonth = 'September'))) *(Cast((select fee.fee_ratefrom fee, driverswhere Fee.Driverid = Drivers.Driversid andfee.currentmonth = 'September' andDrivers.Driversid = 5 )As decimal(6,2))),(Select Drivers.Currency From Drivers Where DriversID = 5)FROM BillingReportWhere billingreport.fromdate = '9/1/2004' Union Select 5,(Select Drivers.Description From Drivers Where DriversID = 6),( Sum( BillingReport.Auto_Reg_Purch +BillingReport.Auto_Reg_Red +BillingReport.Auto_Reg_TRansexch +BillingReport.Auto_Allo_Purch+BillingReport.Auto_Allo_Red +BillingReport.Auto_Allo_Transexch+BillingReport.Auto_Allo_Adj_Purch+BillingReport.Auto_Allo_Adj_Red+BillingReport.Auto_Allo_Adj_transexch+BillingReport.Auto_Adj_Purch+BillingReport.Auto_Adj_Red+BillingReport.Auto_Adj_Transexch )+(Select Sum(Cast(Processed_msg As Int))From XML_messagingWhere CurrentMonth = 'September'))*(Cast((select fee.fee_ratefrom fee, driverswhere Fee.Driverid = Drivers.Driversid andfee.currentmonth = 'September' andDrivers.Driversid = 6 )As decimal(6,2))),(Select Drivers.Currency From Drivers Where DriversID = 6)FROM BillingReportWhere billingreport.fromdate = '9/1/2004' Union Select 6,(Select Drivers.Description From Drivers Where DriversID = 7),( ( a.Accountholder_Active_Accounts -(select accountholder_active_accounts from billingreport whereMonth(fromdate) = Month('9/1/2004')-1 ) )+( a.Accountholder_Zero_Balance -(select accountholder_zero_balance from billingreport whereMonth(fromdate) = Month('9/1/2004')-1 ))) *(Cast((select fee.fee_ratefrom fee, driverswhere Fee.Driverid = Drivers.Driversid andfee.currentmonth = 'September' andDrivers.Driversid = 7 )As decimal(6,2))),(Select Drivers.Currency From Drivers Where DriversID = 7)FROM BillingReport a Where a.fromdate = '9/1/2004' Union Select 7,(Select Drivers.Description From Drivers Where DriversID = 8),( Select telephone From cfxbill Where currentmonth = 'September') *(Cast((select feThanks for any helpMD
View 4 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Aug 24, 2007
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
View 3 Replies
View Related
Jan 7, 2007
Hi
In my table i have a datetime field
now i want to delete all records there are more than 1 hour old
can someone help me with this
Alvin
View 1 Replies
View Related
Feb 15, 2000
Can DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
View 1 Replies
View Related
Mar 29, 2013
I have a bulk insert script. I have a stored procedure. I saved the stored procedure as a .sql file in another folder too. I have another program that can "run external program" and the only files it will run is a .bat or .exe. I want my other program to be able to trigger the stored procedure to run. I think this means I need a .bat file.
Here is my stored procedure:
USE [EricaTraining]
GO
/****** Object: StoredProcedure [dbo].[LoadDailyAdjReport] Script Date: 03/29/2013 10:56:42 ******/
SET ANSI_NULLS ON
GO
[code]....
View 10 Replies
View Related
Jan 22, 2008
Hi,
I have created a stored procedure that will read the content of the text files of a particular folder. I need to make the stored procedure to run daily so that it will read the new files that is present in that folder. I have written a stored procedure to make the process of reading the file. But i need to know how to make the stored procedure to run daily so that it will automatically read all the files. I have got the information that it can be made possible using dts package. As i dont have any knowledge about dts package can anyone help me how to make this possible.
Thanks in advance for any help.
Regards,
Sangeetha
View 6 Replies
View Related
May 29, 2015
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT
IF OBJECT_ID('#External_Referrals') IS NULL
DROP TABLE #External_Referrals;
GO
DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
[Code] ....
View 7 Replies
View Related
Dec 11, 2006
Can anyone point me to the right direction with the stored procedure on making a backup of the database. I am not looking for a scheduled backup. I'm looking for when the stored procedure get executed, the backup start right away. I believe it also require a username and password as well.
Thanks...
View 1 Replies
View Related
Jun 22, 2006
Hello.
I need to quickly make this proc compatible with SQL 2005 and am struggling. I have alot of catching up to do.
Basically, it checks for Foreign Key dependencies in a database. There might be a better way to do this in SQL 2005 but for know I really need to get this working. Any help is verry much appreciated!
--------------------------------------------------------
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER Procedure aes.Check_Dependent_Rows_Exist
(@RowID int,
@has_rows int OUTPUT
)
AS
BEGIN
DECLARE @Colname varchar(200), @Tablename varchar(200)
DECLARE @cnt int
DECLARE @temp_row int
DECLARE @owner varchar(25)
DECLARE @ownerid int
DECLARE @lstrSql nvarchar(2000)
-- #1: declare cursor for maximum performance
DECLARE lcur CURSOR LOCAL FORWARD_ONLY KEYSET READ_ONLY FOR
SELECT syscolumns.Name, OBJECT_NAME(fkeyid) AS FkeyTableName
FROM sysreferences
INNER JOIN syscolumns ON sysreferences.fkeyid=syscolumns.id AND fkey1=syscolumns.colid
WHERE OBJECT_NAME(rkeyid)= 'customer'
OPEN lcur
CREATE TABLE #Temp (DependentRows int)
-- #2: only return a bit indicating if dependant rows exist or not
SET @has_rows = 0
FETCH NEXT FROM lcur INTO @Colname,@Tablename
WHILE @@FETCH_STATUS = 0
BEGIN
SET @temp_row = 0
SELECT @ownerid = uid from sysobjects where name = @Tablename
SELECT @owner = [name] from sysusers where uid = @ownerid
SET @lstrSql= 'insert into #Temp Select DependentRows = Count(' + @Colname + ') from ' + @owner + '.' + @TableName + ' where ' +
@Colname + ' =' + CAST(@RowID AS VARCHAR(16)) + ''
--print @lstrSql
EXEC (@lstrSql)
SELECT @temp_row = ISNULL(DependentRows,0) FROM #Temp
IF @temp_row > 0
BEGIN
-- #3: stop processing as soon as dependant rows are found to exist
SET @has_rows = 1
BREAK
END
FETCH NEXT FROM lcur INTO @Colname,@TableName
END
deallocate lcur
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
-----------------------------------------------------------------------
error
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.order_detail'.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.invoice_header'.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.order_header'.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.payment'.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.cash_on_account'.
(1 row(s) affected)
Cannot grant, deny, or revoke permissions to sa, dbo, information_schema, sys, or yourself.
View 6 Replies
View Related
May 21, 2008
hi,
I need to convert a stored procedure in to a SSIS package, do any body have an idea on this. thanks in advance
View 1 Replies
View Related
May 1, 2008
Hi ~
I made simple stored procedure that is to update user information following as...
ALTER PROCEDURE UpdateUserProfile( @user_id uniqueidentifier, @user_firstname nvarchar(50), @user_lastname nvarchar(50), @user_birth nvarchar(20), @user_gender nvarchar(20) )
AS
UPDATE user_profile SET user_firstname = @user_firstname, user_lastname = @user_lastname, user_birth = @user_birth, user_gender = @user_gender WHERE user_id = @user_id RETURN
When I tried to save this procedure, I faced on "Invalid Object : UpdateUserProfile" error message.
What's the problem ?
View 2 Replies
View Related
Jul 20, 2005
Hallo !I have a Table with a column "ordernumber"ordernumberA12A45A77A88Is it possible to create a stored procedure which makes a string of these column ?Result: string = ('A12','A45','A77','A88')Thanks !aaapaul
View 3 Replies
View Related
May 10, 2007
I would like SQL Server 2000 to distinguish between uppercase and lowercase letters, but only within a single stored procedure. Also, at the end of the sp, I want the original collation to be restored. How will I implement this in my sp?
View 3 Replies
View Related
Jul 3, 2007
Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
Cheers,
Justin
View 2 Replies
View Related
Sep 7, 2004
Hi all,
I have a web application that has a search engine that returns records based off what the user selects in the search engine. I am currently using coalesce in the where statement in my stored procedure to return the records. For eample,
where field1= coalesce(@parm1,field1). I don't know if this example is better than building the sql statement dynamically in a parameter then executing the parameter with sp_executesql. Can someone explain to me which is better or if there is a better solution?
Thanks,
James
View 5 Replies
View Related
Aug 6, 2004
CREATE PROCEDURE ggg_test_sp
@start_date datetime,@end_Date datetime
AS
SET NOCOUNT ON
DECLARE @sqlstmt varchar(1000)
SELECT @sqlstmt='SELECT * FROM ggg_emp WHERE date_join BETWEEN ' +CONVERT(varchar(10),@start_date-1,101) + ' AND ' +CONVERT(varchar(10),@end_Date+1,101)
SELECT @sqlstmt
EXEC (@sqlstmt)
GO
I want to apply date filter in the above sp with dynamic sql stmt. When i execute the above procedure with date ranges( @start_date=07/06/2004 AND @end_Date= 08/06/2004)i am not getting any result because my @sqlstmt variable has the select stamet
SELECT * FROM ggg_emp WHERE date_join BETWEEN 07/06/2004 AND 08/06/2004
BUT it should have the sqlstmt as
SELECT * FROM ggg_emp WHERE date_join BETWEEN '07/06/2004' AND '08/06/2004' to produce the required result
I know that for the above SP we dont need any dynamic sql but this is just an example.
So anyone can help me on this issue.
Thanks.
View 1 Replies
View Related
Sep 29, 2007
Can anyone help me with this dumb question?
I want to use a stored procedure to bring back a recordset depending if a bit column is set to 1. My table has a number of columns that are of Data Type bit and I want to be able to specify which particular column I'm interested in as a parameter when I call the Stored Procedure.
I have set up the Stored Procedure as follows:
CREATE PROCEDURE getProducts
@param1 varchar(50)
AS
SELECT ProductID, ProductName
FROM dbo.Products
WHERE @param1 = '1'
GO
I'm calling it like this:
Dim cmdX, cmdParam, rsX
cmdParam = "OnSpecial"
set cmdX = Server.CreateObject("ADODB.Command")
cmdX.ActiveConnection = conn_STRING
cmdX.CommandText = "dbo.getProducts"
cmdX.Parameters.Append cmdX.CreateParameter("@RETURN_VALUE", 3, 4)
cmdX.Parameters.Append cmdX.CreateParameter("@param1", 200, 1,50,cmdParam)
cmdX.CommandType = 4
cmdX.CommandTimeout = 0
cmdX.Prepared = true
set rsX = cmdX.Execute
rsX_numRows = 0
I know for a fact that I have products in my dbase with the bit column 'OnSpecial' set to 1, yet no records are coming back.
Any pointers would be most appreciated.
View 3 Replies
View Related
Jul 23, 2005
I have a stored procedure spGetAccessLogDynamic and when I try to callit I get the following error:Server: Msg 2812, Level 16, State 62, Line 1Could not find stored procedure 'S'.I dont know why because I dont have anything refering to storedprocedure 'S'I have ran my SQL String with sample values and it works fine. So Iam presuming that it is some kind of syntax error in my storedprocedure but have tried everything and cant find it!Anyway here is the sample data I am using to call it and my spExec spGetAccessLogDynamic '24', '2005/07/04 00:00:00 AM', '2005/11/0400:00:00 AM', 'TimeAccessed DESC'CREATE PROCEDURE spGetAccessLogDynamic(@PinServiceID varchar (4),@StartDate varchar(40),@EndDate varchar(40),@SortExp varchar (100))AS-- Create a variable @SQL StatementDECLARE @SQLStatement varchar-- Enter the Dynamic SQL statement into the variable @SQLStatementSELECT @SQLStatement = ( 'SELECT A.PinValue,A.TimeAccessed,C.Forename, C.SurnameFROM AccessLog A, Members C, Pins PWHERE P.PinValue = A.PinValue ANDP.MemberID = C.MemberID AND A.PinServiceID= ''' + @PinServiceID + '''AND A.TimeAccessed BETWEEN dbo.func_DateMidnightPrevious( ''' +@StartDate + ''' ) AND dbo.func_DateMidnightNext( ''' + @EndDate+''')GROUP BY A.PinValue,A.TimeAccessed, C.Forename, C.SurnameORDER BY ' + @SortExp)-- Execute the SQL statementEXEC ( @SQLStatement)GOAny help would be very very much appreciated!!!!!!ThanksCaro
View 2 Replies
View Related
Dec 4, 2007
We are continuing to have issues with a certain stored procedure using dynamic sql. The issue arose when we tried to clean the stored procedure up, and seemed to have zero problems in staging. As soon as we moved it into production, the stored proc caused excessive blocking and completely slowed down our production environment. We immediately rolled back the older version and production is back to normal.
After looking at the new procedure I don't understand how it could cause blocking. Any help is much appreciated!
Old Proc without issues----
--------
USE [Realist_Prod_1203]
GO
/****** Object: StoredProcedure [dbo].[USP_GetMatchedMLSRecord] Script Date: 12/04/2007 09:33:37 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/*
=====================
Created By: Sunil/Sudeep 19-11-2003
Description:
Does a lookup of MLS Property data for reverse link. This is susceptible to error in that if erroneous data is given
to us,it will not find a match. For this reason, commented out the lookup on Suffix and changed the street
to use a like clause. Many users are putting the suffix in the street clause and no hits are generated.
This hurts performance, but it improves the hit ratio.
Usage: exec USP_GetMatchedMLSRecord 61,'3951','','KENSINGWOOD','DR','3951','columbus','OH','43230','39049','600-260368','600-260368-00','6000260368','urlll'
Mods:
01/08/2004 - Balawant - Added nullif(), as it was comparing apn numbers with '' (empty space)
02/23/2004 - Balawant - Added or (or State = '') condition for state, zip, city, StreetDirection and Suffix.
11/18/2004 - Sunil Padmanbhan - Added begin-end and modified altapn and parcelid in nullif statment.
04/03/2007 - Shiny - changed to Parameterized query generation
04/03/2007 - Vasan - Removed redundant nullif's and added a limit of 100 records on output
04/03/2007 - Shiny - Removed more Nullif's and changed datatypes for Zip and CountyID to Char to match with table datatypes
04/05/2007 - Vasan - Modified to match resultsets with original procedure
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
CREATE PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE @CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
DECLARE @sqltext nvarchar(4000)
SET @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
-- Because of skew and relative few group IDs, you may want to use an inline literal for this one parameter
-- to avoid plan sharing across different GroupIDs. Use explicit parameterization for the other parameters.
if @GroupID is null set @sqltext = @sqltext + '1=1' --ignore Group_ID if null
else SET @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' ' ;
--House number is mandatory: IF @HouseNumber IS NOT NULL AND @HouseNumber <> ''
SET @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '
IF @StreetDirection IS NOT NULL AND @StreetDirection <> '' SET @sqltext = @sqltext + ' AND (StreetDirection=@StreetDirection or @StreetDirection='''') '
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @sqltext = @sqltext + ' AND StreetName like @StreetName '
IF @Suffix IS NOT NULL AND @Suffix <> '' SET @sqltext = @sqltext + ' AND (Suffix=@Suffix or Suffix='''') '
--Unit is mandatory: IF @Unit IS NOT NULL AND @Unit <> ''
SET @sqltext = @sqltext + ' AND Unit=@Unit '
IF @City IS NOT NULL AND @City <> '' SET @sqltext = @sqltext + ' AND (City=@City or City='''') '
IF @State IS NOT NULL AND @State <> '' SET @sqltext = @sqltext + ' AND (State=@State or State='''') '
IF @ZIP IS NOT NULL AND @ZIP <> '' SET @sqltext = @sqltext + ' AND (ZIP=@ZIP or ZIP='''') '
--CountyId is mandatory: IF @CountyID IS NOT NULL AND @CountyID <> ''
SET @sqltext = @sqltext + ' AND CountyID=@CountyID '
-- Execute as an explicitly parameterized query. This will provide plan reuse for any executions of the proc
-- that have the same @GroupID and the same combination of non-empty parameters.
/*print @sqltext
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print ' @CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber*/
EXEC sp_executesql
@sqltext,
N'@ReverseLinkURL varchar(200), @HouseNumber varchar(50), @StreetDirection varchar(50), @StreetName varchar(50),
@Suffix varchar(50), @Unit varchar(50), @City varchar(50), @State varchar(50), @ZIP varchar(50), @CountyID varchar(50)',
@ReverseLinkURL=@ReverseLinkURL, @HouseNumber=@HouseNumber, @StreetDirection=@StreetDirection, @StreetName=@StreetName,
@Suffix=@Suffix, @Unit=@Unit, @City=@City, @State=@State, @ZIP=@ZIP, @CountyID=@CountyID
END
END
New Proc WITH Blocking issues----
--------
/*
=====================
Created By: David Barrs 8-13-2002
Description: Returns the properties for given group id
Usage:
EXEC USP_GetMatchedMLSRecord 1,'8108','','dunn','','','austin','TX','','48453','','','','http://sef.mlxchange.com/reverselink.asp?action=reverselink'
Mods:
xx/xx/xxxx - who - Description
11/28/2007 - Shiny - Refactored the procedure
\\\\\\
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
ALTER PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE
@sqltext nvarchar(4000),
@paramlist nvarchar(4000),
@CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
SELECT @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
IF @GroupID IS NOT NULL
SELECT @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' '
SELECT @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '
IF @StreetDirection IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetDirection = @StreetDirection '
IF @StreetName IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetName LIKE @StreetName + ''%'''
IF @Suffix IS NOT NULL
SELECT @sqltext = @sqltext + ' AND Suffix = @Suffix'
SELECT @sqltext = @sqltext + ' AND Unit=@Unit '
IF @City IS NOT NULL
SELECT @sqltext = @sqltext + ' AND City = @City'
IF @State IS NOT NULL
SELECT @sqltext = @sqltext + ' AND State = @State'
IF @ZIP IS NOT NULL
SELECT @sqltext = @sqltext + ' AND ZIP = @ZIP'
SELECT @sqltext = @sqltext + ' AND CountyID='+ CONVERT (varchar(30), @CountyID)+' '
SELECT @paramlist = '
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)'
/*
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print '@CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber
*/
EXEC sp_executesql @sqltext, @paramlist, @GroupID, @HouseNumber, @StreetDirection, @StreetName,
@Suffix, @Unit, @City, @State, @ZIP, @FIPS, @ApnNumber, @AltApn, @ParcelId, @ReverseLinkURL
END
END;
Thank You,
-D
View 1 Replies
View Related
Aug 1, 2006
Okay, I have sort of a peculiar permissions question I am wondering if someone can help me with. Basically, here's the scenario...
I have a CLR stored procedure which does some dynamic SQL building based on values sent in via XML. It's a CLR stored procedure using XML because I want to build a parameterized statement (to guard against SQL Injection) based on a flexible number of parameters which are basically passed in the XML.
The dynamic SQL ends up reading from a table I'll call TableX and I actually discovered an (understandable) quirk with security.
Basically, the connection context is using security for a low-privilaged Windows account ("UserX") and UserX has no permission to the table referenced in the dynamic SQL but because of the dyanmic nature of the query, the stored procedure ends up adopting the security context of UserX. Naturally, this throws a security exception saying UserX has no SELECT permission on TableX.
Now, I can give UserX read permission to the table in question to get things running, but one of the points of using stored procedures is to defer security to the procedure level vs. configuration for tables or columns.
So in striving toward my ideal of security at the procedure level, my question is what is the best way to allow minimum privilege in this case?
I thought about having the internals of the CLR stored procedure run under a different (low-privalaged) security context, but I am wondering if there's an alternate configuration that may be as secure, but simpler.
PS - Please don't let this degenerate into a conversation about OR mappers. I know that happens a lot on these forums.
View 3 Replies
View Related
Aug 16, 2007
Hi,
I need to create a stored procedure, which needs to accept the column name and table name as input parameter,
and form the select query at the run time with the given column name and table name..
my procedure is,
CREATE PROC spTest
@myColumn varchar(100) ,
@myTable varchar(100)
AS
SELECT @myColumn FROM @myTable
GO
This one showing me the error,
stating that myTable is not declared..
.............as i need to perform this type of query for more than 10 tables.. i need the stored procedure to accept the column and table as parameters..
Plese help me?? Is it possible in stored procedure..
View 3 Replies
View Related
Aug 23, 2007
I am taking my first steps into stored procedures and I am working on a solution for efficiently paging large resultsets with SQL Server 2000 based on the example on 4Guys: http://www.4guysfromrolla.com/webtech/042606-1.shtml
The problem with my stored procedure is, is that it doesn't seem to recognize a variable (@First_Id) in my dynamic Sql. With this particular sproc I get the error message: "Must declare the scalar variable '@First_Id'"It seems to be a problem with 'scope', though I still can't yet figure out. Can anyone give me some hints on how to correctly implement the @First_Id in my stored procedure? Thanks in advance!
Here's the sproc:
ALTER PROCEDURE dbo.spSearchNieuws(@SearchQuery NVARCHAR(100) = NULL,@CategorieId INT = NULL,@StartRowIndex INT, @MaximumRows INT,@Debug BIT = 0)ASSET NOCOUNT ONDECLARE @Sql_sri NVARCHAR(4000),@Sql_mr NVARCHAR(4000),@Paramlist NVARCHAR(4000),@First_Id INT, @StartRow INTSET ROWCOUNT @StartRowIndexSELECT @Sql_sri = 'SELECT @First_Id = dbo.tblNieuws.NieuwsId FROM dbo.tblNieuwsWHERE 1 = 1'IF @SearchQuery IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND dbo.tblNieuws.CategorieId = @xCategorieId'SELECT @Sql_sri = @Sql_sri + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'SET ROWCOUNT @MaximumRows SELECT @Sql_mr = 'SELECT dbo.tblNieuws.NieuwsId, dbo.tblNieuws.NieuwsKop, dbo.tblNieuws.NieuwsLink, dbo.tblNieuws.NieuwsOmschrijving, dbo.tblNieuws.NieuwsDatum, dbo.tblNieuws.NieuwsTijd, dbo.tblNieuws.BronId, dbo.tblNieuws.CategorieId, dbo.tblBronnen.BronNaam, dbo.tblBronnen.BronLink, dbo.tblBronnen.BiBu, dbo.tblBronnen.Video, dbo.tblCategorieen.CategorieFROM dbo.tblNieuws INNER JOIN dbo.tblBronnen ON dbo.tblNieuws.BronId = dbo.tblBronnen.BronId INNER JOIN dbo.tblCategorieen ON dbo.tblNieuws.CategorieId = dbo.tblCategorieen.CategorieId AND dbo.tblBronnen.CategorieId = dbo.tblCategorieen.CategorieId WHERE dbo.tblNieuws.NieuwsId <= @First_Id AND 1 = 1' IF @SearchQuery IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND dbo.tblNieuws.CategorieId = @xCategorieId' SELECT @Sql_mr = @Sql_mr + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'IF @Debug = 1PRINT @Sql_mr SELECT @Paramlist = '@xSearchQuery NVARCHAR(100), @xCategorieId INT'EXEC sp_executesql @Sql_sri, @Paramlist, @SearchQuery, @CategorieIdEXEC sp_executesql @Sql_mr, @Paramlist, @SearchQuery, @CategorieId
View 8 Replies
View Related
Apr 22, 2008
Hi i am trying to make the "userName" section of the code below dynamic as well, how can i do this, the reason being userName will not always be passed through to it.
ALTER PROCEDURE [dbo].[stream_UserFind]
(
@userName varchar(100),
@subCategoryID INT,
@regionID INT
)ASdeclare @StaticStr nvarchar(5000)set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOINSubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like ' + char(39) + '%' + @UserName + '%' + char(39)
if(@subCategoryID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID = ' + cast( @subCategoryID as varchar(10))if(@regionID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.RegionId = ' + cast( @regionID as varchar(10))
print @StaticStr
exec(@StaticStr)
)
View 10 Replies
View Related
Apr 29, 2008
Hi all,
I'm using sql 2005. Can some one please tell me how to write dynamic sql for count. What i want is that i want to count the number of employees existing for the given department names and get the counted values as output into my vb.net 2.0 project. If any one know who to write this please send the code.. Please help me.. I want the below code to change to dynamic sql:
Alter proc GetCountforemp
@DestName varchar(200)=null,
@total int output
as
begin
SELECT @total = Count(distinct Employee.EmployeeID) FROM Employee
INNER JOIN Dest R on R.DestID=Employee.DestID
WHERE R.DestName in ('''+@DestName+''')
end
View 1 Replies
View Related
Jun 6, 2008
My existing ASP 1.0 site keeps getting hacked using SQL injections. I have rewritten the site in ASP 3.5 to stop the attacks but cannot figure out how to dynamically generate a basic keyword search.
I am trying to take the keywords entered into an array and then construct the WHERE clause - not having much luck. Getting either errors or double LIKE statements. Need some help.
string[] SqlKWSrch;
SqlSrch = KWordSrch.Text;SqlKWSrch = SqlSrch.Split(' ', ','); int AStop = SqlKWSrch.Length; int i = 0; foreach( string a in SqlKWSearch ) { if (i <= AStop) { SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' AND "; } else { SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' "; } i++; }
1) I can't seem to properly terminate the final LIKE statement2) can't figure out how to pass 'SqlWHR' to the procedure
GIVEN KEYWORDS: 'antique chairs' entered I want to end up with the below SP, the @SqlWHR parameter appeared to have worked once but it probably was an illusion.
PROCEDURE KeyWordSearch@SqlWHR varchar(100)AS
SELECT L_Name, L_City, L_State, L_Display FROM tblCompanies WHERE L_Kwords LIKE '%' + 'antique' + '%' AND L_Kwords LIKE '%' + 'chairs' + '%' AND L_Display = 1
RETURN
Thank you
View 5 Replies
View Related
Jun 13, 2008
Hi, I have a table with values such as test1, test2, test3, test4, test5.
I need to write a stored procedure with paramater (number TINYINT, number2 TINYINT), the number represents the field that I'm going to select and compare. For example if I pass in (1,5) I will need the fields test1 and test5 and store them in Temp and Temp2. How do I write the following to so it will dynamically select which field to use when passing the parameters?
DECLARE @Temp TINYINT,
DECLARE @Temp2 TINYINT,
SELECT top 1 Temp = test1, Temp2 = test5 from table
View 4 Replies
View Related
May 25, 2004
Hi all!
I need to create a stored procedure with a parameter and then send a WHERE clause to that parameter (fields in the clause may vary from time to time thats why I want to make it as dynamic as possible) and use it in the query like (or something like) this:
---------------------------------------------------
@crit varchar(100)
SELECT fldID, fldName FROM tblUsers
WHERE @crit
----------------------------------------------------
Of course this does not work, but I don't know how it should be done, could someone please point me in the right direction on how to do this kind of queries.
cheers!
pelle
View 2 Replies
View Related
Jul 7, 2004
I am trying to do something similar to the following where I want to perform dynamic ordering on two tables that have been unioned as shown below.
CREATE PROCEDURE procedure_name
@regNum varchar(14),
@sortOrder tinyint = 1
AS
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblSPG_Header
WHERE
REG = @regNum
UNION
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblRCH_Header
WHERE
REG = @regNum
ORDER BY Obs_Date DESC
GO
Note that I am only sorting on the Obs_Date column, but I'd like to be able to sort on any column within the selection list. I know that I need to use:
ORDER BY CASE WHEN @sortOrder = 1 THEN Obs_Date END DESC
but I frequently get the following error when I try to do so:
"ORDER BY items must appear in the select list if the statements contain a UNION operator"
If anyone can offer any suggestions, I would appreciate it. Thanks.
View 1 Replies
View Related
Jul 23, 2004
Hi, I have several parameters that I need to pass to stored procedure but sometimes some of them might be null. For example I might pass @Path, @Status, @Role etc. depending on the user. Now I wonder if I should use dynamic Where clause or should I use some kind of switch, maybe case and hardcode my where clause. I first created several stored procedures like Documents_GetByRole, Documents_GetByRoleByStatus ... and now I want to combine them into one SP. Which approach is better. Thanks for your help.
View 1 Replies
View Related
Aug 17, 2004
Hi
I am getting the following error
Syntax error converting the varchar value 'Select * from Residential WHERE Price BETWEEN ' to a column of data type int.
when running the following SP.
CREATE PROCEDURE testing
(
@Locationnvarchar(100)=NULL,
@TypeHomenvarchar(50)=NULL,
@MinPriceint=0,
@MaxPriceint=9999999999,
@Bedroomsnvarchar(2)=NULL,
@BathsSearchnvarchar(2)=NULL
)
AS
Declare @strSql char(255)
Set @strSql="Select * from Residential WHERE "
Set @strSql=@strSql + "Price BETWEEN " + @MinPrice + " AND " + @MaxPrice
If @Location is NOT NULL
Set @strSql=@strSql + ' AND city = ' + @Location
If @TypeHome is NOT NULL
Set @strSql=@strSql + ' AND Type = ' + @TypeHome
Set @strSql=@strSql + ' AND BDRM >= ' + @Bedrooms
Set @strSql=@strSql + ' AND BATHS <= ' + @BathsSearch
Set @strSql=@strSql + ' AND IDX = Y'
Exec(@strSql)
What is causing this error?
Thanks in advance
View 3 Replies
View Related
