I have a stored prodecure that runs on my laptop (XP SP2) but does not run out on a production server (2003). The stored procedure takes 2 parameters. When I simply run the query I get a result set, but when I execute the stored procedure with the same parameters the data is not grabbed (no error).
There are other stored procedures in this database that run fine, it's just this one that is giving me a problem.
Any suggestions?
Thx.
I execute a simple query with "for xml auto".One of the fields in my table is "char" type and has a blank value.when the query gets to this field the xml construction stops.such that it creates the following , where "core" is the field of type"char". What is the problem<tablename company_id="1119" group_id="0" ideal="0" core="
View 1 Replies View RelatedI am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
What I am looking to do is use a complicated stored procedure to getdata for me while in another stored procedure.Its like a view, but a view you can't pass parameters to.In essence I would like a sproc that would be like thisCreate Procedure NewSprocASSelect * from MAIN_SPROC 'a','b',.....WHERE .........Or Delcare Table @TEMP@Temp = MAIN_SPROC 'a','b',.....Any ideas how I could return rows of data from a sproc into anothersproc and then run a WHERE clause on that data?ThanksChris Auer
View 4 Replies View Related
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I have written the following stored procedure to export a csv file. I am wanting to put a If statement in here so if view UDEF_DISPATCHER_INTERFACE_ORDER_HEADER_VIEW returns nothing then the procedure does not run.
INSERT INTO UDEF_DISPATCHER_INTERFACE_ORDER_HEADER_TABLE_TEMP
SELECT * FROM UDEF_DISPATCHER_INTERFACE_ORDER_HEADER_VIEW
INSERT INTO UDEF_DISPATCHER_INTERFACE_ORDER_LINE_TABLE_TEMP
SELECT * FROM UDEF_DISPATCHER_INTERFACE_ORDER_LINE_VIEW
DECLARE @BcpHeader AS VARCHAR (2000)
[Code] ....
I have created the following stored procedure and tried to retrieve it's output value in C#, however I am getting exceptions. Can anyone tell me what I am doing wrong? Thanks! 1 ALTER PROCEDURE [dbo].[GetCustomerById]
2
3 @CustId NCHAR(5),
4 @CustomerName NVARCHAR(50) OUTPUT
5
6 AS
7 BEGIN
8
9 SELECT @CustomerName = ContactName
10 FROM Customers
11 WHERE CustomerId = @CustId
12
13 END
14
15 RETURN
16
17
18
19
20
21
22 SqlConnection conn = GetConnection(); //retrieves a new SqlConnection
23 SqlCommand cmd = new SqlCommand();
24 cmd.Connection = conn;
25 cmd.CommandType = CommandType.StoredProcedure;
26 cmd.CommandText = "GetCustomerById";
27
28 SqlParameter paramCustId = new SqlParameter();
29 paramCustId.ParameterName = "@CustId";
30 paramCustId.SqlDbType = SqlDbType.NChar;
31 paramCustId.Direction = ParameterDirection.Input;
32 paramCustId.Value = "ALFKI";
33
34 SqlParameter paramCustomerName = new SqlParameter();
35 paramCustomerName.ParameterName = "@CustomerName";
36 paramCustomerName.SqlDbType = SqlDbType.NVarChar;
37 paramCustomerName.Direction = ParameterDirection.Output;
38
39 cmd.Parameters.Add(paramReturn);
40 cmd.Parameters.Add(paramCustId);
41 cmd.Parameters.Add(paramCustomerName);
42
43 conn.Open();
44 SqlDataReader reader = cmd.ExecuteReader();
45
46 string custName = cmd.Parameters["@CustomerName"].Value.ToString();
Hi,I've got some XML which exists as a text variable in a temp table in SQL Server 2000.I need to pass this XML into sp_xml_preparedocument so I can rebuild a table out of it. But I can't figure out the syntax.If I try doing this:declare @idoc intexec sp_xml_preparedocument @idoc output, (select XmlResult from #cache)I get an error, with or without the brackets round the select statement.The temp table is created using an SP, but I can't call that directly either. This:declare @idoc intexec sp_xml_preparedocument @idoc output, exec Search$GetCache @searchIDAlso throws an error.I can't put it into a
local variable because they can't be of type text. I can't pass it into
the SP somewhere as it's being generated on the fly.How can I get my xml into sp_xml_preparedocument?Cheers,Matt
Can someone tell me why my stored procedure is repeating the Name in the same column?
Here's my stored procedure and output:
select distinct libraryrequest.loanrequestID, titles.title, requestors.fname + ' ' + requestors.lname as [Name],
Cast(DATEPART(m, libraryrequest.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(d, libraryrequest.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(yy, libraryrequest.RequestDate) as Varchar(5)) as RequestDate,
Cast(DATEPART(m, libraryrequest.shipdate) as Varchar(5)) + '/' + Cast(DATEPART(d, libraryrequest.shipdate) as Varchar(5)) + '/' + Cast(DATEPART(yy, libraryrequest.shipdate) as Varchar(5)) as ShipDate
from LibraryRequest
join requestors on requestors.requestorid=libraryrequest.requestoridjoin titles on titles.titleid = requestors.titleidwhere shipdate is not null
Output:
ID Title Name Request Date Ship Date
29 Heads, You Win Brenda Smith 1/18/2008 1/18/200835 Still More Games Brenda Smith 1/22/2008 1/22/200851 The Key to.. Brenda Smith Brenda Smith 1/29/2008 1/29/200852 PASSION... Brenda Smith Brenda Smith 1/29/2008 1/29/200853 LEADERSHIP Brenda Smith Brenda Smith 1/29/2008 1/29/2008
Going crazy ugh...
hi iam working for a stored procedure where i am inserting data for a table in a database and after inserting i must get the ID in the same procedure.later i want to insert that output ID into another table inthe same stored procedure.
for example:
alter procedure [dbo].[AddDetails]
(
@IndustryName nvarchar(50),
@CompanyName nvarchar(50),
@PlantName nvarchar(50),
@Address nvarchar(100),
@Createdby int,
@CreatedOn datetime
)
as
begin
insert into Industry(Industry_Name,Creadted_by,Creadted_On) OUTPUT inserted.Ind_ID_PK values(@IndustryName,@Createdby,@CreatedOn)
insert into Company(Company_Name,Company_Address,Created_by,Created_On,Ind_ID_FK) OUTPUT inserted.Cmp_ID_PK values(@CompanyName,@Address,@Createdby,@CreatedOn)
insert into Plant(Plant_Name,Created_by,Creadted_On,Ind_ID_FK,Cmp_ID_FK)values(@PlantName,@Createdby,@CreatedOn,@intReturnValueInd,@intReturnValueComp)
end
Here iam getting the output ID of the inserted data as OUTPUT inserted.Ind_ID_PK and later i want to insert this to the company table into Ind_ID_FK field.how can i do this.
Please help me, i need the solution soon.
Hi iam working with two dropdownlists,one gets the data dynamically when the pageload.later after selecting particular item in the dropdownlist1 i must get data to the dropdownlist2 depending on 1.
For example:
Dropdownlist1 is for industry and 2 is for company.
when i select particual industry in ddl1 i must get companies based on this industry in ddl2.Both the Industry name and company name are maintained in two different tables industry and company with common field ID.please help me with a stored procedure to sort out this problem...
Hello Group
I am new to stored procedures and I have been fighting this for a while and I hope someone can help. In my sp it checks username and password and returns an integer value. I would like to retrieve some data from the same database about the user (the users first and last name and the password of the user). I can’t retrieve the data. Here is my code.
CREATE PROCEDURE stpMyAuthentication
(
@fldUsername varchar( 50 ),
@fldPassword Char( 25 )--,
--@fldFirstName char( 30 ) OUTPUT,
--@fldLastName char( 30 ) OUTPUT
)
As
DECLARE @actualPassword Char( 25 )
SELECT
@actualPassword = fldPassword
FROM
tbMembUsers
Where
fldUsername = @fldUsername
IF @actualPassword IS NOT NULL
IF @fldPassword = @actualPassword
RETURN 1
ELSE
RETURN -2
ELSE
RETURN -1
SELECT
fldFirstName,
fldLastName,
fldPassword
FROM
tbMembUsers
Where
fldUsername = @fldUsername
GO
############### login page ################
Sub Login_Click(ByVal s As Object, ByVal e As EventArgs)
If IsValid Then
If MyAuthentication(Trim(txtuserID.Text), Trim(txtpaswrd.Text)) > 0 Then
FormsAuthentication.RedirectFromLoginPage(Trim(txtuserID.Text), False)
End If
End If
End Sub
Function MyAuthentication(ByVal strUsername As String, ByVal strPassword As String) As Integer
Dim myConn As SqlConnection
Dim myCmd As SqlCommand
Dim myReturn As SqlParameter
Dim intResult As Integer
Dim sqlConn As String
Dim strFirstName, strLastName As String
sqlConn = ConfigurationSettings.AppSettings("sqlConnStr")
myConn = New SqlConnection(sqlConn)
myCmd = New SqlCommand("stpMyAuthentication", myConn)
myCmd.CommandType = CommandType.StoredProcedure
myReturn = myCmd.Parameters.Add("RETURN_VALUE", SqlDbType.Int)
myReturn.Direction = ParameterDirection.ReturnValue
myCmd.Parameters.Add(Trim("@fldUsername"), Trim(strUsername))
myCmd.Parameters.Add(Trim("@fldPassword"), Trim(strPassword))
myCmd.Parameters.Add("@fldFirstName", strFirstName)
myCmd.Parameters.Add("@fldLastName", strLastName)
myCmd.Parameters.Add("@fldPassword", strPassword)
myConn.Open()
myCmd.ExecuteNonQuery()
intResult = myCmd.Parameters("RETURN_VALUE").Value
myConn.Close()
'If strPassword = 55555555 Then
' Session("intDefaultPass") = 1
'End If
Session("strFullName") = strFirstName & " " & strLastName
Session("strPassword") = strPassword
If intResult < 0 Then
If intResult = -1 Then
lblMessage.Text = "Username Not Registered!<br><br>"
Else
lblMessage.Text = "Invalid Password!<br><br>"
End If
End If
Return intResult
End FunctionAt this time I am not getting any errors. How can I retrieve the data that I am after?
Michael
I have an SQL query that can generate XML file. However, it does not seemed to work as a stored procedure. Basically, i want to be able to generate an XML file based on the data stored in a SQL table and be able to do this using script...Also, if there is a script (or stored procedure) that will allow me to generate the XML file with the specification of an XML schema would even be better...
e.g Sample XML file required...<Person><Name>Raymond</Name><NickName>The Legend</NickName></Person><Person><Name>Peter</Name><NickName>The King</NickName></Person>
sp_configure 'show advanced options', 1;GORECONFIGURE;GOsp_configure 'Web Assistant Procedures', 1;GORECONFIGUREGOsp_makewebtask @outputfile = 'C:MyExportFile.xml', @query = 'SELECT * FROM MyTableName for XML AUTO, TYPE, ELEMENTS', @templatefile = 'C:Template.tpl'
I want to capture and process data inside of a stored procedure by executing another stored procedure. If proc1 calls proc2 and proc2 returns 1 or more rows, consisting of 2 or more columns, what is the best way to do this?
Currently, I know I'm returning 1 row of 3 columns, so I concatenate the data and either return it with an OUTPUT parameter or using the RETURN stmt.
TIA,
mike
I have a table that has data and is indexed by the Visit #. Each month I receive new data from a text file that I have to import into this table. On all occasions the text file will have one of the existing Visit #'s contained in it.
I wrote a simple stored procedure that has the INSERT/SELECT statement but the problem I am having is when I execute the Stored Procedure and I run into a record from the text file that already exist in my table the stored procedure errors and stops at that point.
How do I write a stored procedure that will ignore that text record and continue reading the text file and insert records that do not exist?
Is there a stored proceduire that grabs all the data from a specified table and places it in a file.
View 1 Replies View RelatedHi
i m new in sqlserver databases
i need to know how to "store output of data from stored procedure in a text file "
suppose i have a stored procedure which has to cuculate some out put from some tables and in the end i want that all out put in comma delimited text file.
my databse name is check1
i need help please
thanks in advance
take care
bye
Table Strucure - :
TestEven(TestNo,EmpNo,TestDate)
I jst want to write a stored procedure to delete all data which is 2 years old. thank you in adavance.
Hussain
Hello,I read an article on how to use Yahoos API to GeoCode addresses. Basedon the article I created a stored procedure that is used as follows:SPGeocode '2121 15st north' ,'arlington' ,'va' ,'warehouse-test'Returns:Latitude Longitude GeoCodedCity GeoCodedState GeoCodedCountryPrecision Warning----------- ---------- ------------- ------------- ------------------------------ --------38.889538 -77.08461 ARLINGTON VA USPrecision Good No ErrorIt returns Latitude and Longitude and other information. Works great.In conjunction with Haversine formula, I can compute the distancebetween two locations if I know the Lat and Long of the two points.This can start to answer questions like "How many students do we havewithin a 10 mile radius of Location X?"(Marketing should go nuts over this :)My question is how can i use my data from a table and pass it to theSPGeocode via a select statement?The table I would use is:CREATE TABLE "dbo"."D_BI_Student"("STUDENT_ADDRESS1" VARCHAR(50) NULL,"STUDENT_ADDRESS2" VARCHAR(50) NULL,"STUDENT_CITY" VARCHAR(50) NULL,"STUDENT_STATE" VARCHAR(10) NULL,"STUDENT_ZIP" VARCHAR(10) NULL);This is so new to me, I am not even sure what to search.TIARob
View 4 Replies View RelatedHi AllIm generally a vb programmer and am used to referencing multiple recordsreturned from a query performed on an sql database and im trying to movesome functions of my software into sql stored procedures. So far ive beenable to move the functions relatively easily but im unsure about how tooutput multiple values from an sql stored procedure. By this i mean forexample one of the stored procedures may take your username and return thecontents of a single field in a record of one of the tables, but i wouldlike to be able to return for arguement sake the contents of a single fieldfrom two records if possible. Under VB im used to referencing the recordsetwith a (1) after it to reference the corresponding record from the query. Iwas wondering if there is a way to do something similar to this with storedprocedures if possible ?Thanks for any help
View 15 Replies View RelatedHi,
For a particular application i retrieve records using stored procedure and bind the same to the data grid and display the same. The data are fetched from a table say A joined with couple of tables to staisfy the requirement. Now this table A has around 3700000 + records. The Select statement is as
Select column1, column 2, column 3...................... column 25
from table A
inner join hash table D
on A.Column3 = D.Column3
and A.Column4 = D.Column4
and a.nColumn1 = @ParameterVariable
Inner join table B
on a.nColumn1 =b.nColumn1
inner join table C
on A.column2 = C.column2
Indices defined on A are
IDX1 : Column 3, Column 4
IDX2 : Column 1
Around 350 records per second are inserted into the table A during the peak operation time. During this time when executing the procedure, it takes around 4 mins to fetch just 25000 records.
I need to fine tune the procedure. Please suggest me on same.
Thanks
Hi,
I've got some XML which exists as a text variable in a temp table in SQL Server 2000.
I need to pass this XML into sp_xml_preparedocument so I can rebuild a table out of it. But I can't figure out the syntax.
If I try doing this:
declare @idoc int
exec sp_xml_preparedocument @idoc output, (select XmlResult from #cache)
I get an error, with or without the brackets round the select statement.
The temp table is created using an SP, but I can't call that directly either. This:
declare @idoc int
exec sp_xml_preparedocument @idoc output, exec Search$GetCache @searchID
Also throws an error.
I can't put it into a local variable because they can't be of type text. I can't pass it into the SP somewhere as it's being generated on the fly.
How can I get my xml into sp_xml_preparedocument?
Cheers,
Matt
I have this stored procedure.. but it doesn't insert data... Why???
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE dbo.DETTAGLIO_TURNI_DIFENSORI
AS
INSERT INTO Albo_Turno_Dettaglio
(
idalboturno,
idalbo,
idturno,
data
)
VALUES
(
'885261', -- ID chiave
'15', -- da cursore
'778',
'2008-04-01 00:00:00.000' -- problemi inserimento data??
)
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
I have a stored procedure
Code Block
CREATE PROCEDURE WEA_SelectEmployeeListByCourseOrProject
@ProjectID int,
@CourseID int,
@blnIsSearch int,
@strUserName nvarchar(20)
AS
SET CONCAT_NULL_YIELDS_NULL OFF
DECLARE @strRole nvarchar(15),
@ContactID int
SELECT @strRole = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName
Select DISTINCT Contact.ContactID ID, UPPER(Surname + 'gd ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR
, UPPER(ISNULL(ContactReference,'')) ContactReference
FROM Contact
LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID
WHERE RUEmployee=1
AND
( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID))
AND
(@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID)
AND
(
(@strRole = 'MIS_TUTOR' AND
(AssignedEmployee.ContactID = @ContactID
OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1)
OR AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID))
)
OR
(@strRole <> 'MIS_TUTOR')
)
SET CONCAT_NULL_YIELDS_NULL ON
GO
now if i run this stored procedure in Query Analyzer like so...
exec wea_SelectEmployeeListByCourseOrProject 0,0,1,'K_T'
i get 48 records returned.
but if i lift the SQL out of the stored procedure and run it in Query Analyzer like so....
Code Block
SET CONCAT_NULL_YIELDS_NULL OFF
DECLARE @ProjectID int,
@CourseID int,
@blnIsSearch int,
@strUserName nvarchar(20)
SET @ProjectID = 0
SET @CourseID = 0
SET @blnIsSearch = 1
SET @strUserName = 'K_T'
DECLARE @Role nvarchar(15),
@ContactID int
SELECT @Role = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName
PRINT @ContactID
Select DISTINCT Contact.ContactID ID, UPPER(Surname + ' ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR
, UPPER(ISNULL(ContactReference,'')) ContactReference
FROM Contact
LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID
WHERE RUEmployee=1
AND
( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID)) -- the above line was modified to make sure only employees explicitly assigned to a project are brought back. unless it's a search
AND
(@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID)
AND
(
(@Role = 'MIS_TUTOR'
AND ( (AssignedEmployee.ContactID = @ContactID OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1)))
OR
AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID)
)
OR
(@Role <> 'MIS_TUTOR')
)
SET CONCAT_NULL_YIELDS_NULL ON
i only get 5 records returned???
so why do i get a difference when its the same SQL??
Username 'K_T' is of role 'MIS_TUTOR' therefore @Role = 'MIS_TUTOR'
any help on unravelling this mystery is appreciated!
Cheers,
Craig
I am trying to insert data in a table using a stored procedure, but somehow I cannot store the values passed by the stored procedure in the table.
Table has two fields FIRST_NAME, LAST_NAME with varbinary data type(I need to encrypt the data)
My stored procedure is as follows. Please let me know what i am doing wrong!
***************************************************************
ALTER PROCEDURE [dbo].[SP_InsertInfo]
-- Add the parameters for the stored procedure here
@FIRST_NAME varBINARY(100)
,@LAST_NAME varBINARY(100)
AS
OPEN SYMMETRIC KEY key DECRYPTION BY CERTIFICATE cert
BEGIN
SET NOCOUNT ON;
-- Insert statements for procedure here
Insert into [dbo].[INFO] (FIRST_NAME, LAST_NAME)
Values ( encryptbykey( key_guid('key'),'@FIRST_NAME'),
encryptbykey( key_guid('key'),'@LAST_NAME')
)
close SYMMETRIC KEY key
END
**********************************************
EXEC sp_InsertInfo 'larry', 'Smith'
when I run the SP, the data stored in the first_name, last_name fields are @FIRST_NAME', @LAST_NAME' instead of larry, smith respectively.
Thanks
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Hello All,
I'm trying to develop a stored procedure that would do one of TWO things:
1. Return a 'status' that a value does not exist, if I were to provide the parameter via an ASP.NET2.0 page
2. If it does exists, to return the row data associated with that value (id number)
The stored procedure would search a SQL Server table within it self first. It that fails it would look at an Oracle table (work order table). And if that fails to return a 'row' to look through another Oracle table (work request table). If that doesn't occur, then it would throw the result as described in #2.
If the result exists in one of the TWO Oracle tables it would then insert that row into the first SQL Server table that the stored procedure searched through AND would return the row set to the ASP.NET page.
While all this is happening, I was hoping to get some insight as to how to create a "Please Wait..." feedback and then moving to the final result.
Looking forward to the wise words of the many on this forum, as I have experienced in the past! :)
Hello everyone I have a stored procedure that I am trying to save datetime data to at the moment I can create a string that will output 25/05/2007 18:30 Does anyone know the best way to get this into the correct format for my SP parameter
cmdPublish.Parameters.Add(new SqlParameter("@datPublishDate", System.Data.SqlDbType.DateTime));
cmdPublish.Parameters["@datPublishDate"].Value = ????
Thanks
Hi,
I'm at my wit's end with this. I have a simple stored procedure:
PROCEDURE [dbo].[PayWeb_getUserProfile] ( @user_id_str varchar(36), @f_name varchar(50) OUTPUT)AS
BEGINDECLARE @user_id uniqueidentifier;
SELECT @user_id = CONVERT(uniqueidentifier, @user_id_str);
select @f_name=f_name FROM dbo.tbl_user_profile WHERE user_id = @user_id;
ENDRETURN
The proc runs perfectly from the Management Console. In my ASP.net form (C#), the following always results in: "Invalid attempt to read when no data is present." (I'll highlight the line where the error results):
SqlConnection conn = new SqlConnection(<connection string data>);SqlDataReader reader;
SqlCommand comm = new SqlCommand("dbo.PayWeb_getUserProfile", conn);comm.CommandType = System.Data.CommandType.StoredProcedure;
SqlParameter f_name = new SqlParameter("@f_name", SqlDbType.VarChar, 50);
f_name.Direction = ParameterDirection.Output;comm.Parameters.Add(f_name);
comm.Parameters.Add("@user_id_str", SqlDbType.VarChar, 36).Value = Membership.GetUser().ProviderUserKey.ToString().ToUpper();reader = comm.ExecuteReader();Response.Write("Num: " + reader["@f_name"].ToString()); // ERROR: Invalid attempt to read when no data is present.
reader.Close();conn.Close();
The data is there. When I put a watch on 'Reader', I see the correct first_name data there.
Your help is appreciated.
Im currently in the process of developing a new system in ASP.net. The system uses multiple tables from a SQL database. To link information from say the products table to the suppliers table a unique key from the suppliers table is stored in the products table to show which products each supplier has bought...simple so far.
From this I can then pull out any of the information relating to that product instead of just displaying the ID. Currently this is done by creating a stored procedure and then dragging the stored procedure onto the dataset layer to create the data adapter.
Im not 100% this is the best way to be doing this. Is it possible to simply just link the tables in the dataset layer to display a string from another table instead of an ID referencing number?!
any help on this would be much appreciated as I cant really continue untill I have sorted out the data structure problems.Thanks in advancedmowfo
Hi i have the following stored procedure which should retrieve data, the problem is that when the user enters a name into the textbox and chooses an option from the dropdownlist it brings back duplicate data and data which should be appearing because the user has entered the exact name they are looking for into the textbox. For instance
Pmillio Jones
Pmillio Jones
Pmillio Jones
Robert Walsh
Here is my stored procedure;
ALTER PROCEDURE [dbo].[stream_UserFind]
-- Add the parameters for the stored procedure here
@userName varchar(100),
@subCategoryID INT,@regionID INT
AS
SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,
Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategoriesON
Users.userID= UserSubCategories.userIDINNER JOIN
SubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHEREuserName LIKE COALESCE(@userName, userName) OR
SubCategories.subCategoryID = COALESCE(@subCategoryID,SubCategories.subCategoryID);