I'm executing a stored procedure from an Execute SQL Task in my SSIS package. The procedure takes two input variables and creates and executes an SQL statement based on those variables. I don't have it set to return anything.
When I run the package in debug mode on my desktop, it runs just fine.
However, when I save it to the RDBMS and execute it as a step in a job, the stored procedure errors out because it doesn't receive the input parameters. If I replace the ? in the statement with the value I know the parm should have, it executes just fine. The parms are mapped to the 0 (and, where applicable, 1) input parms.
As an aside, the package variable supplying the value is a byte value. However, in the parm mapping for the step, I define it as varchar because that's what the stored procedure is expecting. Could this be goofing me up?
I'm want to pass empty parm value to a stored procedure. I'm new at this stuff and not sure how to do this. To make it work I can put values in parms and it works great. I don't want to populate some of the fields in the table with values. The fields are cnty,dist,beat,convertedkey. Anyone know how I can get it done? Code below. Thanks for your help!
int shift = Convert.ToInt16(dr.Cells[1].Value.ToString());
int prior = Convert.ToInt16(dr.Cells[2].Value.ToString());
I created a simple stored procedure shown below. It works wonderfully. The only problem is that it likes to disappear on me. I am accessing it through a VB.Net program. The system will work fine throughout the day and suddenly it will be gone. I can exit Sql Server Management Studio and come back in and it will still be there so that is not causing it. The database stays connected all the time.
Any suggestions?
Code Snippet IF EXISTS( SELECT * FROM sys.procedures WHERE name = N'VerifyPart' ) DROP procedure VerifyPart; --create a procedure for the part code tab verify part function go create procedure VerifyPart ( @PartNumber varchar(50) = null, @LastUpdated varchar(30) = null ) as --Update Part Number update Parts set LastUpdated = @LastUpdated where PartNumber = @PartNumber
I get this error: Server: Msg 119, Level 15, State 1, Line 10 Must pass parameter number 3 and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'.
But when I run it this way : exec usp_List_Relationship_Users 1851 , 'Channel Member', @cust_idOUTPUT, @user_login_id OUTPUT, @username OUTPUT, @password OUTPUT, @status_id OUTPUT, @sdesc OUTPUT, @administrator OUTPUT
I get the expected results. Why should I omit the name of the name of the input parameters? I don't know why I am getting this error if don't run by ommitting the name of the input params.
Any help regarding this matter is greatlt appreciated. You can assume that all the variables are declared prior to executing the stored procedure.
When I create a stored procedure like the one below and save it,everything seems fine. But when I close Enterprise Manager andre-open it, the stored procedure is gone.Any ideas?SET ANSI_DEFAULTS ONGOCREATE PROCEDURE [dbo].[sp_Test] ASSELECT * FROM OPENQUERY(LINKEDSERVER, 'SELECT V.VENDOR_ID,V.VENDOR_NAME FROM VENDOR V')GOTed
Is there a way to use a parm in the 'IN' of a where clause?Example (integerValue is an int datatype):declare @list as varchar(max)set @list = '1, 2, 3, 4'select *from table1where integerValue IN ( @list )
In SSIS, I have an Execute SQL Task that runs a direct SQL statement as follows to update an MS/SQL database table:
Update auditTable SET PackageName = @pkgname
In the parameters mapping, @pkgname is mapped to the System variable System::PackageName (as input).
This task runs fine if I use ADO.NET as the data source without any error.
But if I use OLEDB as the source it fails miserably and requires that the @pkgname variable be defined (as if it's a user variable, when in fact it was intended as a parm for the update statement only).
I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.
I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:
/CONFIGFILE "C:myconfig.dtsConfig.
In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a similar problem to the one indicated by David Van Diest. I could not find any answers to his query. Could anyone help!
Thanks
Mon, 8 Feb 1999 16:24:55 -0600 From: David Van Diest [sql7] DTS and disappearing indexes
I have noticed that if I use the Microsoft ODBC driver for SQL Server when I transfer data from one database to another my indexes disappear. If I pick other odbc source and then fill in the data source my indexs do not go away.
Anyone else see this behavior? I don`t think it should be working this way.
I am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.
I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.
Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.
I have three servers replicating. One is a publisher and two subscribers. If I put data in the publisher, some of it will disappear after replicating. When data is entered in one of the subscribers, the same thing happens.
Anyone have any ideas??? I am doing a merge replication and all servers are running SQL Server 2000.
Ok, I'm new here and I REALLY need some help here.
In my organisation, we have a Server with MSSQL 7 running with some databases. Some of the databases are published for replication.
Now, since Monday, we've been losing databases that are in use! :confused:
The files are disappearing and being marked as suspect in SQL. The physical file has been deleted from the machine even when SQL is running and on some databases are replicating. In one instance, we were making permission changes on a user and it just said that the file is no longer there. And when we checked, the msdb system database had disappeared as well. So now the server is showing up as having no databases. We were able to recover some of them through backups and a handy recovery tool. But now we are helpless as to WHY this is happening. We suspect Virus but we have Norton CorporateEdition running and Liveupdate updating every day.
I've searched the web for any one that had the same problem, but nothing came up. Only some stuff saying that space was an issue, but not on a drive with 21GB remaining and the biggest database is 3GB...
Any help, insight or resolution will be greatly appreciated.
I am running an Access 2000 MDB against a SQL 7 back end, using ODBC linkedtables over a LAN and a WAN. The system has been operational for years withrelatively few problems.Recently, WAN users have been reporting several hundred records disappearingat a time. The records are all sequential, and they're in a table thatcontains about 60,000 records. This all started last week at about the sametime (not sure if before or after) that the WAN went down for a couple ofhours for an unknown reason. Since then, every once in a while, a WAN userwill report that several hundred records in a block are just "missing."Then, an hour or two later, they reappear.Any ideas as to what's going on or what can be done to rectify this?Thanks!Neil
I am not sure where to put this but correct me if i'm in the wrong forum.
I've been working on this database for some time now. It's an Access 2003 database with a SQL backend. Everything was going well until one of the users noticed her data was disappearing after she send an email. The database has a memo field that gets pasted in the body of an email when it is created. Sometimes, when the user sends an email and goes back into the record, the memo field is blank. I know the field has data in it at the time of the email because it will give you an error if the field is null and you won't be able to send it. And, it goes into a history table with everything the user does with each record. I've checked this history table and it shows that all records in question, an email was sent. I have no idea why the data would disappear in this field. It does not happen all the time. I've performed the same steps and I can't duplicate the problem. There's no code associated with the memo field that deletes it after sending the email. Can anyone think of anything that would cause this?
The problem i am facing here is disappearing data in sql server 2000. I not sure what is the problem, but it is getting worse and worse. Anyone can point me to a right direction whether this is a security vulnerability which i need to download the patch, or is it my computer is infected with virus., or is it a bug in sql server?
I remember having read somewhere about this problem also, but not sure in which website already. Anyone, please help!!! Because we are going to deploy to production server soon, and this is a problem that need to be solve ASAP..
I am supporting a system that needs to allow users to have access to Temp DB. I set these users up using the GUI, but whenever the server is restarted, these users are wiped out. Is there anyway to keep these users when the server is rebooted?
1. The table statistic shows for example 67 rows in a table, select count(*) only returns 63 rows. 2. Table statistic shows 50 rows, select count(*) returns 55 rows.
In both cases if you do an insert the newly inserted row sometimes can be retrieved by a select statement sometimes not. Row statistics sometimes is updated correctly, sometimes not.
Integrity check for these databases says everything is fine. DBCC CHECKDB, DBREINDEX, UPDATESTATISTICS, ... does not help or says everything is fine.
Already opened a case at HP's Microsoft support and they involved Microsoft itself but all are a little bit clueless at the moment.
As this is our main DB cluster and several databases are affected we had to stop most of our applications since last Thursday and now we are getting a little bit in trouble so any hint is very welcome.
Thanks in advance
PS: Restore is not an option - as all tools say everything is fine all of our backups from the last months include the error. Don't ask why nobody recognized the lost data earlier, seems they were stored but not required for some time.
I am using a hosted MSSQL 2000 database that powers the backend of mywebsite. Website visitors interact with it via ASP pages I havedeveloped. I also have an internal FileMaker 7 database thatperiodically synchs with it via Filemaker's ODBC functionality.Several times now, I have come in one day to discover that my ASP pagesdon't work. When I look into it, one of my MSSQL tables will be missinga few fields. There is nothing in any of my code that sends an ALTERTABLE command or any other command that affects table structure. Thesedeletions of fields is totally random.The most recent example was with a table called FreeTeacherSubs. I justdiscovered today that three fields went missing:HowDidYouHearAboutYES TEXTFollowUpCallOrEmail TEXTHowMaterialsFit TEXTSuffice to say I am baffled! Has anyone ever experienced fieldsdisappearing from their tables?Kevin
Hi,We have a SQL server db backend for our ERP system. I have written aCrystal Report to extract data from one particular table calleditemspecbomw (c.30000 records) which contains amongst other thingsBill of Materials costings. When I run the report I know that somerows are missing as when I look at values through the ERP systemitself, the values are different.What I have found is that when I run the equivalent ERP system report,the Crystal Report I have written shows extra rows. SQL Query Analyserbehaves exactly the same as the report I have written even when usinga "select * from". I have tested opening up a bigger tables (c. 700000records) which appears without a problem. If anyone knows why thismystery is happening, I woould be grateful for your help.Many thanks,Tony.
I'm using an Access front end to a SQL 2000 database.I have a form from which I enter data. Everything seems fine, I check thetables and my records are being inserted.When I close Access and reopen it, data from three of my tables is gone.SQL Profiler turns up nothing. If I try to access a problem table fromEnterprise manager while Access is open I get an ODBC error. If I try toaccess it after I close Access, the records are gone.Where do I start looking to figure out where the problem is? I'm at a lost.TIA for help.--Jake
