Stored Procedure Reuse
Jul 23, 2005
I wonder if there is a solution for this in SQL 2000 (or do I have to
wait for SQL 2005)?
I am currently in the middle of developing a 'Yahoo' style portal which
will be rolled out in about 20 or so countries. I have set up in SQL
Server one database per country. All the portals have the same
functionality - but show different data.
Is it possible to have a single database which holds stored
proceedures, functions and views and have the individual country
databases use these?
Note: I want to avoid using EXEC sp_executesql.
I look forward to some good news on this! Thank you in advance.
Dadou.
View 2 Replies
ADVERTISEMENT
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Sep 19, 2006
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
View 1 Replies
View Related
Dec 28, 2005
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Apr 30, 2007
Dear Folks,
I'm getting the error with application like this..............
"the transaction log for database "mydatabase" is full.....to find out why space in the log can not be reused, see the log_reuse_wait_desc column in sys databases. "
I've checked with the column, there are totally 3 options.(I've checked with all other databases)
1)checkpoint,
2)log_backup,
3)nothing
what can i choose for this error to be suppressed?
actually there was log_backup option.
please guide me in this regard.........
thanks in advace.
Vinod
View 1 Replies
View Related
Apr 25, 2007
It's a pretty basic question but I haven't been able to find any examples out there. I dimmed a dataadapter and would like to reuse later in my code (line 3 in the code below). What is the correct syntax to do this? Dim da As New SqlDataAdapter("SELECT * FROM myTable", conn)da.Fill(myDataTable)da.______ ("SELECT * FROM myTable2", conn)da.Fill(myDataTable2)
View 2 Replies
View Related
Jul 10, 2004
Hi,
I am getting the following error:
The SqlParameter with ParameterName '@pk' is already contained by another SqlParameterCollection
If I could work out what code to post I would, but I can say that I am managing my Sql data in my code by caching small arrays of SqlParameter objects as pulled from the database. If I need to update the DB I change the cached SqlParameter and re-insert it. If I perform a SELECT I check the cache first to see if I already have the SqlParameter.
However, currently, I am experiencing the above error when performing a select, then later an update, followed by another update.
Would I be correct in saying that a SqlParameter object can only be used once for a database operation and should be discarded? Would I be correct if I said that the SqlCommand object should be discarded? I am barking up the wrong tree entirely?
Distressed in DBLand,
Matt.
View 2 Replies
View Related
May 1, 2006
I can create a SqlCacheDependency, and link it to a cached item in httpcontext cache. When something change, it will remove the cached item from the cache. I think I have to redo the process when that happens - prepare sql command, create SqlCacheDependency and insert the item into cache. Now I only need a notification from my SQL when something changes in one of my table, I don;t need read anything from db, and I think I should find a way to not recreate the SqlCacheDependency object everytime?
any suggestion?
View 2 Replies
View Related
Mar 28, 2007
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
View 9 Replies
View Related
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
View 1 Replies
View Related
Dec 15, 2007
Hello, Can I reuse the deleted primary key id? I'm using SQLServer2005. cheers,imperialx
View 6 Replies
View Related
Nov 14, 2006
What is the best code pratice to use do the following code,
SELECT
fo.no as LNum,
fo.name as LName,
sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END) as In1,
sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END) as In2,
sum(In1+In2)/10 as inDec,
from fo group by fo.no,fo.name order by fo.name
instead of
SELECT
fo.no as LNum,
fo.name as LName,
sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END) as In1,
sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END) as In2,
((sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END))+sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END)))/10 as inDec,
from fo group by fo.no,fo.name order by fo.name
I cant use functions and procedures. Is there any better and cleaner way to code this, reusing the calculated values?
View 1 Replies
View Related
Apr 19, 2008
Hi. I'm starting to try out LINQ to SQL, and so I'm using SQL Express (on Vista) to experiment. My problem is that once I create and delete a database, I can never use the name again. If, after deleting the old database, I try to create another one with the same name (say Acct1), I get "Create failed for Database 'Acct1'. An exception occurred while executing a Transact-SQL statement or batch. The logical file name "Acct1" is already in use. Choose a different name. Error: 1828"
I am trying to create the database in SQL Server Management Studio Express. That database name does not appear in the list of databases: there is only AdventureWorks and the system databases. The .MDF and .LDF files have been deleted. Not just sent to the recycle bin, but permanently deleted.
I have already used up Acct1, Acct2, and Acct3, just to try out different scenarios. Each time, I delete the old database before trying to create a new one with the same name, but I am forced to always supply a new, different name. I have checked the directory with hidden files and system files showing to be sure there is no old file lurking there somewhere.
Is there a way to delete these old "logical file names"? I can't even find any reference to their existence except for the message that says they are already in use.
View 11 Replies
View Related
Jul 29, 2015
with c1 As (
select 1 As '1' , 2 As '2' , 3 As '3'
)
, c2 As (
select 4 As '4', 5 As '5', 6 As '6'
union all
select 1 , 2 ,3 from c1 -- >>>>> select from c1 here
) select * from c2
union all
select * from c1 -- >>>>>> and select from c1 here
According to the query above , I try to reuse the subquery by put the subquery into 'with cte' name (c1) then i select this 2 times .
if I do this way , how many time this subquery (c1) execute ?
if 1 time then this is the right way to reuse this subquery .
if 2 times , it is not then what should i do to reuse this subquery ?
View 3 Replies
View Related
Nov 26, 2007
I have read the articles posted online concerning different dialog reuse strategies. Most of them create a new table in the sender to hold dialog ids. I was wondering what is wrong, if anything, with the following approach:
Code Block
declare @dlg uniqueidentifier
select top 1 @dlg = conversation_handle from sys.conversation_endpoints where state IN ('CO')
if @dlg is null
begin
begin dialog conversation @dlg
from service [tcp://SFT3DEVSQL01:4022/TyMetrix360Audit/DataSender]
to service '//TyMetrix360Audit/DataWriter','386DDD04-7E55-466A-BE83-37EFC20910B9'
on contract [//TyMetrix360Audit/Contract] with encryption = off;
end
;send on conversation @dlg
message type [//TyMetrix360Audit/Message] (@msg)
Here I simply select a conversation handle directly from the sys.conversation_endpoints table. Can anyone see any issues with this approach?
Thanks in advance....
View 6 Replies
View Related
Jan 3, 2007
I have been working with SQL for quiet a while but think this perhaps is a very basic question that has always escaped me:
At my work I was exposed to both, MS SQL Server 2000 and Sybase Adaptive Server Anywhere/Sybase SQL Anywhere.
Under Sybase I was able to use aliases in other calculations and filters but i have never been able to do the same with SQL.
Example:
In Sybase I can write this:
Select Price * Units as Cost Cost * SalesTax as TotalTaxFrom Invoice Where TotalTax > 3.5
However if i want to do this in MS SQL 2000 i have to go trough
Select
Price * Units as Cost
Price * Units * SalesTax as TotalTax
From Invoice
Where (Price * Units * SalesTax) > 3.5
In the long run this is costing me a lot of code redundancy, not to mention a debugging nightmare. Is there a way to replicate this alias usage in MS SQL Server?
View 3 Replies
View Related
Jun 5, 2007
I am working on a project developing a fairly large number of reports with a team of developers. Many of these reports have common elements and code, such as common headers with user-selectable colors. Additionally, many of the common parts of the reports are at mockup stage currently, and many features will have to be added to the reports as time goes on.
We're attempting to create a generalized framework that will minimize the duplication of effort as we develop these reports, and as we go back and modify or fix them later.
What is the best way to approach this?
My first attempt was to create a report template and base all the reports off of the same template. That was fine for the first pass, but as we need to make changes later, they will not be propagated to the already existing reports.
My second attempt was to have each componant of that template reference a subreport, so that changes to the actual report template will be minimized as we go forward. This works great for minimizeing work, but it appears that you lose many features with the use of subreports, and there seems to be a pretty serious performance impact as well. I have posted about one such issue here: Pagination
If anyone has pointers about how to go about this, and where I should start, they would be greatly apreciated!
View 2 Replies
View Related
Jun 19, 2014
I have a table in which there is a column of type identity(1,1),in the same table i have bulk data, and i have deleted a row from my table, so now i want to reuse that same Id again, how to do that.
View 3 Replies
View Related
Mar 4, 2008
Hello,
I have an ID column which is an Identity column, and it counts from 1 upwards.
If I have 10 records, I have ID's number 1 to 10.
If I then add another record, it will give the ID number 11.
Imagine I then delete ID number 9
Is it possible to get the next record I create to take number 9 instead of 12 ?
View 5 Replies
View Related
Feb 7, 2006
Hello
I have some common functions that i use in several script tasks. How du i store a function globaly so that i can use it from different projects and still only have to edit it one place ?
View 4 Replies
View Related
Jun 12, 2007
I have several stage to star (i.e. moving data from a staging table through the key lookups into a fact table) ETL transformations in a single SSIS package. Each fact table has a different set of measures but the identical foreign key set, e.g. ConsultantKey, SubsidiaryKey, ContestKey, ContestParamKey and MonthKey.
Currently I have to replicate the key lookup (Surrogate Key Pipeline, or SKP) for each data flow. If I could cache each dimension one time in the package and reuse it for each stage to fact it would be much more efficient.
Is there a way for me to reuse a common data flow?
View 6 Replies
View Related
Sep 13, 2007
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
View 3 Replies
View Related
Jan 25, 2008
I've added a typed DataSet and dragged a table across from the server explorer. When I click configure on the table adapter, then click previous back to the "Choose Your Data Connection" dialog. The only option is the new connection that was just created when I added the sql server to the server explorer. Is there anyway to reuse my existing web.config connection string? My goal is to have a single connection string in my web.config.
Thanks.
-David
View 3 Replies
View Related
May 2, 2008
I'm trying to implement a configurable way of executing a group of SQL statements using either an Oracle or SQL database as the source for the data.
I'm currently building a connection string with a Script Task and then assigning it to a package variable so that it can be used by a connection manager but this only works with a SQL OLEDB connection.
I'm holding all the connection details in a database table, hence the need for the scripting but would it be possible to extend the task to reuse a single connection manager by changing it's properties?
View 7 Replies
View Related
May 11, 2007
Hello,
We have a recurring problem with one of our MS SQL Servers (MS SQL Server 2005 SP 1).
The SQL Server serves as a database server for a Web application with approximately 1500 users, the server is dedicated for the DataBase server.
The scenario is that the database servers cpu peaks at 100% and stays there until restart of the SQL Server service.
The error message from the applicatoion log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 18056
The client was unable to reuse a session with SPID 94, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
SPID varies.
Anybody that knows anything why this error occurs?
Regards
John
View 25 Replies
View Related
Mar 31, 2008
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
View 1 Replies
View Related
Oct 10, 2006
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies
View Related
Nov 15, 2006
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
View 3 Replies
View Related
May 18, 2007
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
View 2 Replies
View Related
