EXEC('SELECT COUNT(docid) AS Total FROM docs WHERE ' + @QueryFilter)I want to get the cound as an output parameter.I can get output parameters to work only when I dont use EXEC. I need to use EXEC for this case since @QueryFilter gets generated in the stored procedure based on some some other data.How can I get that count using ouput parameter?
View 2 RepliesHi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
i built a stored procedure with inserting in to customers table.
i have one column with identity.
so want to take that identity column value in the same stored procedure.
so how can i write that procedure with insert in to statements in that stored procedures.
can any one tell me.
also how to get that value in ado.net 2.0.
friends please tell me.
Hi
I've an existing SQL 2000 Stored Procedure that return data in many (~20) output parameters.
I'm starting to use it in a .Net c# application and it seems to insist that I setup all the output parameters:
SqlParameter param = cmd.Parameters.Add("@BackgroundColour",SqlDbType.TinyInt);
param.Direction=ParameterDirection.Output;
even if I only need the value of a single one.
Is this right? Is there a way to avoid coding every one every time?
Hi,
I hope someone can help.
I've written a stored procedure that returns a value via an output parameter.
I'm calling the stored procedure in an sql session is a loop, and it passes the value back correctly the first time, but all subsequent calls the output parameter appears to have the same value. I believe that I'm making some very basic mistake, but I can't work it out.
Here's how I'm calling the stored procedure several times
begin
declare @instrumentid int
exec GetInstrumentId 'OFX,AUDCHF,p,1,2007-03-20 16:54:21.843,2007-06-20,100.1', @instrumentid output;
select @instrumentid
exec GetInstrumentId 'OFX,AUDUSD,c,2,2007-03-20 16:54:21.843,2007-06-20,100.2', @instrumentid output;
select @instrumentid
exec GetInstrumentId 'OFX,AUDCHF,p,3,2007-03-20 16:54:21.843,2007-06-20,100.3', @instrumentid output;
select @instrumentid
end
And this is the start of the stored procedure
Create PROCEDURE [dbo].[GetInstrumentId]
(@Ticket varchar(250), @InstrumentId int output)
AS
If I call the stored procedure once it gives the corect output, if I call it several times the output parameter (@instrumentid ) never changes.
Sean
Hi All,
The following is a code snippit. My main interests are the OUT and OUTPUT parameter keywords. One returns a single value, and the other seemingly a resultset. OUTPUT returns a single value, however OUT seems to return a list of values. Could I please get this confirmed?
Also, I cannot see how the value being returned by OUT is being iterated...
Any help on the obove two matters is appreciated.
Thank You
Chris
BEGIN SNIPPET----------------------------------------------------------------------------------------------------------
--The following example creates the Production.usp_GetList
--stored procedure, which returns a list of products that have
--prices that do not exceed a specified amount.
USE AdventureWorks;
GO
IF OBJECT_ID ( 'Production.uspGetList', 'P' ) IS NOT NULL
DROP PROCEDURE Production.uspGetList;
GO
CREATE PROCEDURE Production.uspGetList @Product varchar(40)
, @MaxPrice money
, @ComparePrice money OUTPUT
, @ListPrice money OUT
AS
SELECT p.[Name] AS Product, p.ListPrice AS 'List Price'
FROM Production.Product AS p
JOIN Production.ProductSubcategory AS s
ON p.ProductSubcategoryID = s.ProductSubcategoryID
WHERE s.[Name] LIKE @Product AND p.ListPrice < @MaxPrice;
-- Populate the output variable @ListPprice.
SET @ListPrice = (SELECT MAX(p.ListPrice)
FROM Production.Product AS p
JOIN Production.ProductSubcategory AS s
ON p.ProductSubcategoryID = s.ProductSubcategoryID
WHERE s.[Name] LIKE @Product AND p.ListPrice < @MaxPrice);
-- Populate the output variable @compareprice.
SET @ComparePrice = @MaxPrice;
GO
--- USE
DECLARE @ComparePrice money, @Cost money
EXECUTE Production.uspGetList '%Bikes%', 700,
@ComparePrice OUT,
@Cost OUTPUT
IF @Cost <= @ComparePrice
BEGIN
PRINT 'These products can be purchased for less than
$'+RTRIM(CAST(@ComparePrice AS varchar(20)))+'.'
END
ELSE
PRINT 'The prices for all products in this category exceed
$'+ RTRIM(CAST(@ComparePrice AS varchar(20)))+'.'
----------------------
--- Partial Result Set
----------------------
--Product List Price
---------------------------------------------------- ------------------
--Road-750 Black, 58 539.99
--Mountain-500 Silver, 40 564.99
--Mountain-500 Silver, 42 564.99
--...
--Road-750 Black, 48 539.99
--Road-750 Black, 52 539.99
--
--(14 row(s) affected)
--
--These items can be purchased for less than $700.00.
I am stuck on how to syntactically retrieve an output value (@ProdCount) from a stored procedure. The SPROC works fine: the value of @ProdCount appears correctly in the output window. However, I can't retrieve it in the DAL handler (value remains 0). Does anyone have an idea on how to properly extract the return value. TIA for any pointers.SPROC (abridged): ALTER PROCEDURE and_Store_GetProductsByProdCatID_SortPage (@ProdCatID INT,...@ProdCount INT OUTPUT
)
ASSELECT @ProdCount=(SELECT COUNT(*) FROM and_StoreProduct WHERE ProdCatID= @ProdCatID)DECLARE @SQL nvarchar(4000)SET @SQL = 'WITH tmpProd AS ( SELECT ROW_NUMBER() etc.. )SELECT ProdID, etc..FROM tmpProdWHERE Row BETWEEN etc..ORDER BY etc..'
EXECUTE(@SQL)RETURNDAL handler (abridged): Public Overloads Shared Function GetProductListByCatID(ByVal ProdCatID As Integer, ..., ByVal ProdCount As Integer) As List(Of Product) Dim productList As List(Of Product) = New List(Of Product) Try
Using con As New SqlConnection(ConfigurationManager.ConnectionStrings("conAnders").ConnectionString) Dim cmd As SqlCommand = New SqlCommand("and_Store_GetProductsByProdCatID_SortPage", con) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.AddWithValue("@ProdCatID", ProdCatID) '...
cmd.Parameters.AddWithValue("@ProdCount", ProdCount) ' Output parm. Add dummy value.
Dim objProduct As Product 'Temp Product.
con.Open()
Using myReader As SqlDataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection) While myReader.Read() objProduct = New Product() With objProduct .ProdID = myReader.GetInt32(myReader.GetOrdinal("ProdID")) 'etc..
End With
productList.Add(objProduct)
End While Dim tmp As Object = cmd.Parameters("@ProdCount").Value ' <-- Not updated
myReader.Close() End Using End Using Catch ex As Exception Throw ' Pass up the error.
End Try Return productList End Function
Hi
How I building a stored procedure that
return a output parameter and value return that I can
call from other stored procedure or VB ?
thank you in advance
I am trying to set up a stored procedure to return details about an item in my database. Say I use the following declarations for a stored procedure:
@Parameter1 int output,
@Parameter2 varchar(200) output,
@Parameter3 int output
and then I used a query like:
select @Parameter1 = table.field1, @Parameter2 = table.field2, @Parameter3 = table.field3 from table where itemID = 7
to populate the output parameters the problem I am running into is that if @Parameter1 is null, then @Parameter2 and @Parameter3 also return as null. But, If i rewrite the declarations to:
@Parameter3 int output,
@Parameter2 varchar(200) output,
@Parameter1 int output
then, with the same query, @Parameter3 and @Parameter2 get the values they should, even if @Parameter1 is null
does anyone have any ideas?
I guess another question is, I am right now in the code itself (not the demonstration here) returning 6 values, since this procedure will only ever return one record, I decided to implement it as output variables, rather than returning a 1 record result set to the application. Am I better off just returning the 1 record result set then parsing it out into variables in the application?
Thanks in advance
-madrak
Hi all;
How can I show the Name & Age of the selected student's ID in the appropriate TextBox(s) (txtName & txtAge)?
BTW:
My "ShowStudent" stored procedure:
ALTER PROCEDURE ShowStudent
@ID int
AS
SELECT ID, Name, Age FROM Student WHERE ID=@ID
RETURN
And this is the code for "Show" button:
' Which SP? Connection?
Dim cmdSelect As New SqlCommand("ShowStudent", con)
cmdSelect.CommandType = CommandType.StoredProcedure
'-----[ Spacifay SP parameters ]-----
'ID
cmdSelect.Parameters.Add("@ID", SqlDbType.Int, 4)
cmdSelect.Parameters("@ID").Value = CType(txtID.Text, Integer)
'Open Connection
con.Open()
'-----[ Execute the select command ]-----
cmdSelect.ExecuteReader()
'----------------------------------------
'Close connection
con.Close()
'========================================================
End Sub
So, do I have to use an OUTPUT parameter in the stored procedure? If Yes, How to get its (the parameter) value and bind it to the appropriate TextBox?
Hope my question is clear!!
Thanks in advanced!
I'm trying to write an esqlc program that will run a stored procedure that returns several output parameters. I haven't been able to find any documentation to date that explains how to run the "EXEC SQL EXECUTE procname" command and specify the output parameters.
My stored procedure "aek_proc1" takes one input parameter (p1 - an 8-character string) and 3 output parameters (p2 - an integer; p3 - an 8-character string, and p4 a 40-character string).
My esqlc program contains the following code….
EXEC SQL BEGIN DECLARE SECTION;
char p1[9];
int p2;
char p3[9];
char p4[41];
WXEC SQL END DECLARE SECTION;
sprintf(&p1[0], "GL");
p2 = 0;
sprintf(&p3[0], "");
sprintf(&p4[0], "");
EXEC SQL EXECUTE aek_proc1 :p1,
:p2 OUTPUT,
:p3 OUTPUT,
:p4 OUTPUT;
I am getting errors at runtime about constants being passed for OUTPUT parameters.
I can run the same stored procedure in Query Analyser and it works beautifully (see below)
declare @p1 char(8)
declare @p2 integer
declare @p3 char(8)
declare @p4 char(40)
set @p1 = 'GL'
execute aek_proc1 @p1, @p2 output, @p3 output, @p4 output
select @p1 p1, @p2 p2, @p3 p3, @p4 p4
Any idea what I'm doing wrong or how it should be coded?
I'd really appreciate any advice you can offer!!
I've spend hours browsing this newsgroup and found lots of examples of how to do this in VB and from Query Analyser but I can't find any examples for ESQL/C that work.
So, please help!!!
Thanks,
AllanK :rolleyes:
If I want to get back about 30 strings as output parameters from a stored procedure, what is my best bet? Each string is upto 50 characters each.
Do I send them back individually as seperate parameters? Return as a large parsed string? Return as XML?
Thanks!
I have this SP:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetSessionInformation]
@CustomerID int,
@Success bit OUTPUT,
@Email VarChar(55) OUTPUT,
@FirstName VarChar(55) OUTPUT,
@LastName VarChar(50) OUTPUT,
@PhoneNumber VarChar(50) OUTPUT,
@CompanyName VarChar(50) OUTPUT
AS
SET NOCOUNT ON
DECLARE @UserKey AS int
SELECT @CustomerID = CustomerID
FROM Customers
WHERE CustomerID = @CustomerID
IF @CustomerID IS NULL
BEGIN
SET @Success = 0
END
ELSE
BEGIN
SET @Success = 1
END
BEGIN
SELECT customerID, Email, FirstName, LastName, PhoneNumber, CompanyName
FROM Customers
WHERE CustomerID = @UserKey
How do I test it in management studio?
When I run a EXECUTE GetSessionInformation 56
I get this error:
Procedure 'GetSessionInformation' expects parameter '@Success', which was not supplied.
Thanks for any help!
I am a bit confused by an issue that I am having with executing an Oracle stored procedure (with an output parameter) using an ADO.NET connection object. I am able to get this working using an OLEDB connection, but I have no idea why the ADO.NET connection doesn't work. (Bug, by design, or my ignorance?) Actually, I can even get this to work if I use the .NET Providers for OLE DBMicrosoft OLE DB Provider for ORACLE if we set the connectionType to ADO.NET. This is the error that I am receiving:
[Execute SQL Task] Error: Executing the query "pkg_utility_read.test_out_var " failed with the following error: "The OracleParameterCollection only accepts non-null OracleParameter type objects, not SqlParameter objects.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It is also worth mentioning that the ORACLE stored procedure has an out parameter with a NUMBER datatype which I think maps to the ADO.NET Int32 datatype. I guess OLE DB datatypes are more closely mapped to ORACLE datatypes. In OLE DB you can set the parameter to double and the ORACLE stored procedure to NUMBER and it works.
Any help on this would be most appriciated.
I have coded a stored procedure to return nearly all of the columns of a single record selected by using a unique key value. The record is in an SQL database, not within an in-memory DataSet. All of the parameters that I wish to have returned to my program are defined as OUTPUT; the two key values are defaulted to INPUT, as there is no need to return them to the calling program. I also have defined the direction of these parameters in the calling SQLDataAdapter function. However, when I run this, the values returned are either the current date for my DateTime parameters, Nothing for my Char parameters or 0's for my integer parameters.
When I try testing the sproc alone, by using the "Step Into Stored Procedure" action in Visual Studio, I get a message in the Debug Output window indicating that parameter @TktClassID was expected and not supplied. This is an OUTPUT parameter, which makes me question why I should be providing any sort of value for it within my VB code. Following are the function definition from my SQLDataAdapter class that calls my sproc, and the sproc itself. I appreciate any help that anyone can provide.
**FUNCTION DEFINITION FROM SQLDataAdapter Class
Public Function Fetch(ByVal ticket As Ticket) As Ticket
Dim connbuilder As New System.Data.SqlClient.SqlConnectionStringBuilder
connbuilder("Data Source") = "ITS-KCGV7VZSQLEXPRESS"
connbuilder("Integrated Security") = "True"
connbuilder("Initial Catalog") = "ITSHelpDesk"
Using conn As New System.Data.SqlClient.SqlConnection(connbuilder.ConnectionString)
Using comm As New System.Data.SqlClient.SqlCommand("dbo.TicketFetch", conn)
conn.Open()
comm.CommandType = CommandType.StoredProcedure
Dim parm As System.Data.SqlClient.SqlParameter
'Add Input parameters (i.e. Key values)
'Add @TicketYear parameter
parm = comm.Parameters.Add("@TicketYear", SqlDbType.SmallInt)
parm.Value = DBNull.Value
parm.Direction = ParameterDirection.Input
'Add @TicketID parameter
parm = comm.Parameters.Add("@TicketID", SqlDbType.Int)
parm.Value = DBNull.Value
parm.Direction = ParameterDirection.Input
'Add Output parameters
'Add @TktClassID parameter
parm = comm.Parameters.Add("@TktClassID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktClassID
'Add @TktRequestTypeID parameter
parm = comm.Parameters.Add("@TktRequestTypeID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktRequestTypeID
'Add @DateOpened parameter
parm = comm.Parameters.Add("@DateOpened", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateOpened
'Add @DateClosed parameter
parm = comm.Parameters.Add("@DateClosed", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateClosed
'Add @DateLastAssigned parameter
parm = comm.Parameters.Add("@DateLastAssigned", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastAssigned
'Add @DateLastStatusChange parameter
parm = comm.Parameters.Add("@DateLastStatusChange", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastStatusChange
'Add @TktStatus parameter
parm = comm.Parameters.Add("@TktStatusID", SqlDbType.SmallInt)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.TktStatusID
'Add @DescrRequest parameter
parm = comm.Parameters.Add("@DescrRequest", SqlDbType.VarChar)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DescrRequest
'Add @DescrResolution parameter
parm = comm.Parameters.Add("@DescrResolution", SqlDbType.VarChar)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DescrResolution
parm.Value = " " 'Handle bug?
'Add @OpenStatus parameter
parm = comm.Parameters.Add("@OpenStatus", SqlDbType.Bit)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.OpenStatus
'Add @UserLastUpdate parameter
parm = comm.Parameters.Add("@UserLastUpdate", SqlDbType.Char)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.UserLastUpdate
'Add @DateLastUpdate parameter
parm = comm.Parameters.Add("@DateLastUpdate", SqlDbType.DateTime)
parm.Direction = ParameterDirection.Output
parm.SourceColumn = ticket.DateLastUpdate
comm.ExecuteNonQuery()
End Using
End Using
Return ticket
End Function
**STORED PROCEDURE DEFINITION
USE [ITSHelpDesk]
GO
/****** Object: StoredProcedure [dbo].[TicketFetch] Script Date: 03/24/2008 08:40:53 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Peters
-- Create date: 3/17/2008
-- Description: Fetch Ticket from Ticket table
-- =============================================
ALTER PROCEDURE [dbo].[TicketFetch]
-- Add the parameters for the stored procedure here
@TicketYear smallint = 0,
@TicketID int = 0,
@TktClassID smallint = NULL OUTPUT,
@TktRequestTypeID smallint = NULL OUTPUT,
@DateOpened datetime = NULL OUTPUT,
@DateClosed datetime = NULL OUTPUT,
@DateLastAssigned datetime = NULL OUTPUT,
@DateLastStatusChange datetime = NULL OUTPUT,
@TktStatusID smallint = NULL OUTPUT,
@DescrRequest varchar(500) = NULL OUTPUT,
@DescrResolution varchar(500) = NULL OUTPUT,
@OpenStatus bit = NULL OUTPUT,
@UserLastUpdate char(10) = NULL OUTPUT,
@DateLastUpdate datetime = NULL OUTPUT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT
@TktClassID = [TktClassID],
@TktRequestTypeID = [TktRequestTypeID],
@DateOpened = [DateOpened],
@DateClosed = [DateClosed],
@DateLastAssigned = [DateLastAssigned],
@DateLastStatusChange = [DateLastStatusChange],
@TktStatusID = [TktStatusID],
@DescrRequest = [DescrRequest],
@DescrResolution = [DescrResolution],
@OpenStatus = [OpenStatus],
@UserLastUpdate = [UserLastUpdate],
@DateLastUpdate = [DateLastUpdate]
FROM [dbo].[Ticket]
WHERE [TicketYear] = @TicketYear AND [TicketID] = @TicketID
END
RETURN
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
Hi all,
In a Database "AP" of my SQL Server Management Studio Express (SSMSE), I have a stored procedure "spInvTotal3":
CREATE PROC [dbo].[spInvTotal3]
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
This stored procedure "spInvTotal3" worked nicely and I got the Results: My Invoice Total = $2,211.01 in
my SSMSE by using either of 2 sets of the following EXEC code:
(1)
USE AP
GO
--Code that passes the parameters by position
DECLARE @MyInvTotal money
EXEC spInvTotal3 @MyInvTotal OUTPUT, '2006-06-01', 'P%'
PRINT 'My Invoice Total = $' + CONVERT(varchar,@MyInvTotal,1)
GO
(2)
USE AP
GO
DECLARE @InvTotal as money
EXEC spInvTotal3
@InvTotal = @InvTotal OUTPUT,
@DateVar = '2006-06-01',
@VendorVar = '%'
SELECT @InvTotal
GO
////////////////////////////////////////////////////////////////////////////////////////////
Now, I want to print out the result of @InvTotal OUTPUT in the Windows Application of my ADO.NET 2.0-VB 2005 Express programming. I have created a project "spInvTotal.vb" in my VB 2005 Express with the following code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub printMyInvTotal()
Dim connectionString As String = "Data Source=.SQLEXPRESS; Initial Catalog=AP; Integrated Security=SSPI;"
Dim conn As SqlConnection = New SqlConnection(connectionString)
Try
conn.Open()
Dim cmd As New SqlCommand
cmd.Connection = conn
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "[dbo].[spInvTotal3]"
Dim param As New SqlParameter("@InvTotal", SqlDbType.Money)
param.Direction = ParameterDirection.Output
cmd.Parameters.Add(param)
cmd.ExecuteNonQuery()
'Print out the InvTotal in TextBox1
TextBox1.Text = param.Value
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
conn.Close()
End Try
End Sub
End Class
/////////////////////////////////////////////////////////////////////
I executed the above code and I got no errors, no warnings and no output in the TextBox1 for the result of "InvTotal"!!??
I have 4 questions to ask for solving the problems in this project:
#1 Question: I do not know how to do the "DataBinding" for "Name" in the "Text.Box1".
How can I do it?
#2 Question: Did I set the CommandType property of the command object to
CommandType.StoredProcedure correctly?
#3 Question: How can I define the 1 output parameter (@InvTotal) and
2 input parameters (@DateVar and @VendorVar), add them to
the Parameters Collection of the command object, and set their values
before I execute the command?
#4 Question: If I miss anything in print out the result for this project, what do I miss?
Please help and advise.
Thanks in advance,
Scott Chang
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 :Â @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 :Â @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 :Â @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutputÂ
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
ex:
myprocedure(@Cusname varchar(50), @Cusid int output)as
Insert into Customer(Cusname) values (@Cusname)SELECT @cusid = @@IDENTITY
i add the query to my adapter called CreatCustomer (@Cusnam,@Cusid)private Merp_CusListTableAdapter _CuslistAdapter = null;protected Merp_CusListTableAdapter Adapter
{
get
{if (_CuslistAdapter == null)
_CuslistAdapter = new Merp_CusListTableAdapter();return _CuslistAdapter;
}
}
Now how i write function in BLL to receive output paramter from creatcustomer function?
I have written a simple C# console application that create my own Stored Procedures
the code is here
----------------------------------------------------------------------------
static void Main(string[] args)
{
SqlConnection cn;
string strSql;
string strConnection;
SqlCommand cmd;
strConnection="server=(local);database=Northwind;integrated security=true;";
strSql="CREATE PROCEDURE spmahdi @CustomerID nchar(5) @counter int OUTPUT AS SELECT OrderID, OrderDate,RequiredDate,ShippedDate FROM Orders WHERE CustomerID = @CustomerID ORDER BY OrderID SET @counter=@@rowcount";
cn=new SqlConnection(strConnection);
cn.Open();
cmd=new SqlCommand(strSql,cn);
cmd.ExecuteNonQuery();
cn.Close();
Console.WriteLine("Procedure Created!");
}
------------------------------------------------------------------------------------
but it has some errors becuase of my strSql
strSql="CREATE PROCEDURE spmahdi @CustomerID nchar(5) @counter int OUTPUT AS SELECT OrderID, OrderDate,RequiredDate,ShippedDate FROM Orders WHERE CustomerID = @CustomerID ORDER BY OrderID SET @counter=@@rowcount";
I mean in creating the stored procedure
if i delete the Output parameter from my stored procedure
and my strSql would be somethimg like this
strSql="CREATE PROCEDURE spmahdi @CustomerID nchar(5) AS SELECT OrderID, OrderDate,RequiredDate,ShippedDate FROM Orders WHERE CustomerID = @CustomerID ORDER BY OrderID ";
There will be no errors
I use Visual Studio.NET 2003(full versoin)and MSDE(not Sql Server)
Could someone help me solve this problem?
Thanks and Regards.
I've read that stored procedures should use output parameters instead ofrecordsets where possible for best efficiency. Unfortunately I need toquantify this with some hard data and I'm not sure which counters touse. Should I be looking at the SQL Server memory counters or somethingelse.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi all,
In my SQL Server Management Studio Express (SSMSE), pubs Database has a Stored Procedure "byroyalty":
ALTER PROCEDURE byroyalty @percentage int
AS
select au_id from titleauthor
where titleauthor.royaltyper = @percentage
And Table "titleauthor" is:
au_id title_id au_ord royaltyper
172-32-1176
PS3333
1
100
213-46-8915
BU1032
2
40
213-46-8915
BU2075
1
100
238-95-7766
PC1035
1
100
267-41-2394
BU1111
2
40
267-41-2394
TC7777
2
30
274-80-9391
BU7832
1
100
409-56-7008
BU1032
1
60
427-17-2319
PC8888
1
50
472-27-2349
TC7777
3
30
486-29-1786
PC9999
1
100
486-29-1786
PS7777
1
100
648-92-1872
TC4203
1
100
672-71-3249
TC7777
1
40
712-45-1867
MC2222
1
100
722-51-5454
MC3021
1
75
724-80-9391
BU1111
1
60
724-80-9391
PS1372
2
25
756-30-7391
PS1372
1
75
807-91-6654
TC3218
1
100
846-92-7186
PC8888
2
50
899-46-2035
MC3021
2
25
899-46-2035
PS2091
2
50
998-72-3567
PS2091
1
50
998-72-3567
PS2106
1
100
NULL
NULL
NULL
NULL
////////////////////////////////////////////////////////////////////////////////////////////
I try to do an ADO.NET 2.0-VB 2005 programming in my VB 2005 Express to get @percentage printed out in the VB Form1. I read some articles in the websites and MSDN about this task and I am very confused about "How to Work with Output Parameters & Report their Values in VB Forms": (1) Do I need the Form.vb [Design] and specify its properties of the object and classes I want to printout? (2) After the SqlConnectionString and the connection.Open(), how can I bring the value of @percentage to the Form.vb? (3) The following is my imcomplete, crude draft code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=pubs;Integrated Security=SSPI;"
Dim connection As SqlConnection = New
SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("byroyalty", connection)
command.CommandType = CommandType.StoredProcedure
...................................................................
..................................................................
etc.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From the above-mentioned (1), (2) and (3), you can see how much I am lost/confused in attempting to do this task. Please help and give me some guidances and good key instructions for getting the output parameter printed out in the FORM.vb in my VB 2005 Express project.
Thanks in advance,
Scott Chang
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
1 public static List<string> viewtree(int root)
2 {
3 SqlConnection con = new SqlConnection(mainConnectionString);
4 con.Open();
5 try
6 {
7 List<string> ids = new List<string>();
8 SqlCommand command = new SqlCommand(@"ShowHierarchy2", con);
9 command.Parameters.AddWithValue("@root", root);
10 command.Parameters.Add(new SqlParameter("@outstring", SqlDbType.VarChar));
11 command.Parameters["@outstring"].Direction = ParameterDirection.Output;
12 command.CommandType = CommandType.StoredProcedure;
13 //command.ExecuteScalar();
14 //ids = command.Parameters["@outstring"].Value.ToString();
15
16 SqlDataReader dr = command.ExecuteReader();
17 while (dr.Read())
18 {
19 ids.Add((dr["@outstring"].ToString()));
20 }
21 //command.Parameters.Clear();
22
23 return ids;
24 }
25 finally
26 {
27 con.Close();
28 }
29 }
Can someone tell me why i'm getting the following error:String[1]: the Size property has an invalid size of 0. Thanks in advance
I have a variable @NetPay as type money, and a stored proc spGetNetPay.
The output of spGetNetPay has one column NetPay, also with type of money, and always has one row.
Now I need assgin output from spGetNetPay to user variable @NetPay. How can I do That?
Set @NetPay = (Exec spGetNetPay) Sorry this does not work. Is it possible to create a user defined function?
I have little knowledge about User defided function. Is is the way I should go?
Thanks.
David J.
I'm calling a stored procedure from outside program using
Execute SPid(a stored procedure).
In the SPid procedure i want to return a value using
Output.
Can any one tell me how do it since i never used it before ?
Hi
I am running a stored procedure which first puts the data in a temp table and then gives the output...
the output is supposed to generate a report based on data from temp table
However when i run it, the first 2 statements are
(15345 row(s) affected)
(407 row(s) affected)
abd then the select statement runs...due to this, the report in ASP returns an error...does anyone know how i can suppress the first 2 lines and get only the actual data as output
any help will be appreciated
regards,
When I run a script in query analyzer using a script (A "GO" statement exists after each SQL) I get the results on screen as soon as each query completes. When I run thru stored proc, I can get the result only after the whole procedure completes execution. Is there any way to get the outpout immediately as soon as each query completes? This will be useful in tracking thre progress of a stored proc.
Thanks
Satish
I am using a stored procedure to query tables and format a record to write to a file. Below is the syntax I'm using to do the write.
set @cmd = 'echo ' + rtrim(@patient_rec) + ' >> f:output
ecall.csv'
exec master..xp_cmdshell @cmd
The procedure will write about 30,000 records or so and then quit writing to the file. Is there a setting I have to modify to write more records or is there a better way to do this?
Dear All,How can I show the resultrecords of a SP.I can be done by doubleclick the SPname?But how to do it by code.I want the following interfaceIn my form the user1 selects a SP (combobox showing a userfrinly name)2 adds the related parameters3 and then click the show result-buttonbut the .execute command doen't show teh records.I want the same output as you have doublclicking the SPname in theobjectwindow.Thanks,Filip
View 1 Replies View Related I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
HiI have this code snippet[CODE] string connstring = "server=(local);uid=xxx;pwd=xxx;database=test;"; SqlConnection connection = new SqlConnection(connstring); //SqlCommand cmd = new SqlCommand("getInfo", connection); SqlDataAdapter a = new SqlDataAdapter("getInfo", connection); a.SelectCommand.CommandType = CommandType.StoredProcedure; a.SelectCommand.Parameters.Add("@Count", SqlDbType.Int).Value = id_param; DataSet s = new DataSet(); a.Fill(s); foreach (DataRow dr in s.Tables[0].Rows) { Console.WriteLine(dr[0].ToString()); }[/CODE] When I seperately run the stored procedure getInfo with 2 as parameter, I get the outputBut when I run thsi program, it runs successfully but gives no output Can someone please help me?
View 1 Replies View Related