I am trying to fill a cursor with the results of a Stored
Procedured, but SQL give me an syntax error message , does any one can
give me some help
I am using SQL Server, this is the first lines of my code
DECLARE FRates_Cursor CURSOR FOR
exec GET_FJRs_Eng 'all'
OPEN FRates_Cursor
if I run just the exec GET_FJRs_Eng 'all' line it give me the data
results I am trying to put into the cursor, what that means is the
stored is working fine
I have a stored procedure that basically recieves the where clause of a select statement and executes the new sql statement... ie:
CREATE PROCEDURE [dbo].[bsa_GetImportIDs] (@FilterText varchar(1000)) AS
DECLARE @MySQL varchar(1000)
SET @MySQL = "SELECT Import_ID FROM tblImport WHERE " + @FilterText
EXEC (@MySQL) GO
Now, in another stored procedure, I need to use the stored procedure above in a cursor so that I can execute an insert statement for each occurance of the Import_ID that appears in that dataset... ie:
CREATE PROCEDURE [dbo].[bsa_PutLargeCase] AS
DECLARE @CaseID uniqueidentifier SET @CaseID = NewID() Declare @ImportID uniqueidentifier
Declare curClient Cursor FAST_FORWARD for SELECT Import_ID FROM dbo.bsa_GetImportIDs (@FilterText) <---- this does not work!!!
Open curClient FETCH NEXT FROM curClient INTO @ImportID WHILE @@FETCH_STATUS = 0 BEGIN
EXEC dbo.bsa_PutCaseDetail @CaseID, @ImportID
FETCH NEXT FROM curClient INTO @ImportID END
CLOSE curClient DEALLOCATE curClient
GO
How can I utilize my first stored procedure in the cursor of the second? ... or Are there any other approaches that may be a better solution to what I am trying to accomplish?
any of you have an idea how i can declare an output parameter for my cursor which is inside a stored procedure. i would lik to see the output using the exec command but i don't know how to get the out from my cursor. please help!
I need to write a stored procedure using T-SQL to declare a cursor for containing id(staff_no), names and specialism of all doctors that have specialism, The contents of the cursor then are to be displayed using a loop and print statement to give a formatted display of the output of each record within the cursor.
The doctors table has the following columns with specialism allowing NULL values
doctor ( staff_no CHAR(3), doctor_name CHAR(12), position CHAR(15), specialism CHAR(15), PRIMARY KEY(staff_no) )
I am trying to decalare the cursor in the below stored procedure. Can any one please help me to correct the cursor declaration?? Basically, i am testing how to declare the cursor in stored procedure.
CREATE PROCEDURE STP_EMPSAL @empno int, @Employee_Cursor CURSOR VARYING OUTPUT FOR SELECT empno FROM AdventureworksDW.dbo.emp AS OPEN Employee_Cursor; FETCH NEXT FROM Employee_Cursor into @empno; WHILE @@FETCH_STATUS = 0 BEGIN BEGIN TRAN UPDATE emp set sal= sal+ 2000 where empno = @empno and comm is null mgr='Scott'; FETCH NEXT FROM Employee_Cursor into @empno; COMMIT; END; CLOSE Employee_Cursor; DEALLOCATE Employee_Cursor;
Hi guys!i want to create one cursor in the t-sql. the problem is i want to usestored procedure instead of select command in cursor.can anyone tell me how can i use stored procedure's o/p to createcursor?i'm using sql 2000 and .net 2.0thanks,Lucky
I have stored procedure which contains follwing part of it. it says syntax when i worte line to get @@identity valuewhen delete that line command succesful. but i need to get @@identity from the insert statement and assign it to a variable and use it after any body pls tell me how to get this within a stored prosedure or what is the error of the following code bit. (#tblSalesOrders is a temporary table which containsset of records from orginal table )DECLARE @soNo1 INT DECLARE @CursorOrders CURSOR SET @CursorOrders = CURSOR FAST_FORWARD FOR select fldSoNo from #tblSalesOrders declare @newSONO1 int OPEN @CursorOrders FETCH NEXT FROM @CursorOrders INTO @soNo1 WHILE @@FETCH_STATUS = 0 BEGIN ----for each salesorder insert to salesorderline insert into tblSalesOrders (fldWebAccountNo,fldDescription,fldSoDate,fldGenStatus) select (fldWebAccountNo,fldDescription,fldSoDate,fldGenStatus) from #tblSalesOrders where fldSoNo =@soNo1;
set @newSONO1=SCOPE_IDENTITY; -------in this section again create another cursor for another set of records and insert to a table passing identity value return from the above insert -------------------------- SELECT @intErrorCode = @@ERRORIF (@intErrorCode <> 0) GOTO PROBLEM FETCH NEXT FROM @CursorOrders INTO @soNo1 END CLOSE @CursorOrders DEALLOCATE @CursorOrders
I have created the following stored procedure to get the text from one table and compare with them with another table and the one's that match will assign the corresponding ID. But the problem is that it only assigns the last id in the table from the main table which new_cur2 holds. So the problem is that its not updating with the correct ID its just updating with the last ID the cursor holds. Does any one know what it could be.....I think it may just be a little coding error....thanks
CREATE PROCEDURE [MYSP] AS
Declare @pdesc nvarchar(30) Declare @ssc int Declare @myid int Declare @name nvarchar(30)
Declare new_cur CURSOR DYNAMIC FOR SELECT ProductDescription, SubSubCatID FROM C2000HPB FOR UPDATE
Open new_cur FETCH FROM new_cur INTO @pdesc, @ssc While @@FETCH_STATUS = 0
BEGIN Declare new_cur2 CURSOR DYNAMIC FOR SELECT SubSubCatID, SubSubCategory FROM SSC FOR READ ONLY
Open new_cur2 FETCH FROM new_cur2 INTO @myid, @name While @@FETCH_STATUS = 0
BEGIN IF PATINDEX ('@name%',@pdesc) = 0 Set @ssc = @myid UPDATE C2000HPB SET SubSubCatID = @ssc FETCH NEXT FROM new_cur2 INTO @myid, @name
END
Close new_cur2 DEALLOCATE new_Cur2 FETCH NEXT FROM new_cur INTO @pdesc,@ssc END Close new_cur DEALLOCATE new_Cur
Can someone post some code that shows a Stored Procedure receiving a cursor that it can process - lets say a group of order detail records are received that must be saved along with the single Order header record.
And, in another example, a SP returns a result set to the calling program. - For example, a particular sale receipt is pulled up on the screen and the order detail is needed.
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,
declare mycur CURSOR SCROLL for select myRowID from myTable order by myRowID open mycur;
Fetch ABSOLUTE 30 from mycur into @id close mycur; deallocate mycur;
select @id this script turns me a value.
i create a stored procedure from above script and its syntax is ok; CREATE PROCEDURE SELECT_MyRow AS declare @cur cursor declare @RowID decimal set @cur = CURSOR SCROLL for select myRowID from myTable order by myRowID open @cur Fetch ABSOLUTE 30 from @cur into @RowID close @cur deallocate @cur select @RowID GO
my c# code using stored procedure is below;
Code Snippet try {
OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection); cmd.CommandType = CommandType.StoredProcedure; myconnection.Open(); OleDbDataReader reader = cmd.ExecuteReader(); MessageBox.Show(reader.GetName(0));//here fails while (reader.Read()) {
The code above fails because reader reads no values, error message is "No data exists for the row/column" but i know exists. Can anyone help me, what is the difference between stored procedure and script ?
I appear to be having an issue where the @LetterVal and @Numeric variables aren't resetting for each loop iteration, so if no results are found, it just returns the previous loops values since they aren't overwritten. Below is the stored procedure I've created:
ALTER PROCEDURE [dbo].[ap_CalcGrade] -- Add the parameters for the stored procedure here @studId int, @secId int, @grdTyCd char(2), @grdCdOcc int, @Numeric int output,
[Code] ....
And below is the "test query" I'm using:
-- *** Test Program *** Declare @LetterVal varchar(2), -- Letter Grade @Numeric int, -- Numeric Grade @Result int -- Procedure Status (0 = OK) Execute @Result = dbo.ap_CalcGrade 102, 86, 'QZ', 3,
[Code] ....
This is resulting in an output of:
A+ 97 A+ 97 C- 72
but it should be returning the output below due to the 2nd data set not being valid/found in the sp query:
A+ 97 No Find C- 72
I'm sure this is sloppy and not the most efficient way of doing this, so whats causing the errant results, and if there is any better way I should be writing it. Below is the assignment requirements:
Create a stored procedure using the STUDENT database called ap_CalcGrade that does the following:
1. Accepts as input STUDENT_ID, SECTION_ID, GRADE_TYPE_CODE, and GRADE_CODE_OCCURRENCE 2. Outputs the numeric grade and the letter grade back to the user 3. If the numeric grade is found, return 0, otherwise return 1 4. You must use a cursor to loop through the GRADE_CONVERSION table to find the letter grade
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4, The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3, The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3, The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Desired output (no trailing comma):
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4 The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3 The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3 The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Next, how do I call the stored procedure without doing it RBAR? Is that possible?
My server is MS Sql Server 2005. I'm using com.microsoft.sqlserver.jdbc.SQLServerDriver as the driver class. I've established a connection to the database.
I'm trying to invoke a stored procedure using JDBC and a callable statement. The stored procedure has a parameter @CurOut CURSOR VARYING OUTPUT. How do I setup the callable statement so the output parameter is accepted by the driver?
I'm not really trying to pass a cursor up to the database Server but I'm wanting a cursor back from the stored procedure that is other than the result set or other value the stored procedure returns.
First problem: What java.sql.Types (or SQL Server specific) value do I specify for the out parameter I'm registering on the CallableStatement?
Second problem: What do I set the value of the parameter to?
I am begginner at best so I hope someone that is better can help.I have a stored procedure that updates a view that I wrote using 2cursors.(Kind of a Inner Loop) I wrote it this way Because I couldn'tdo it using reqular transact SQL.The problem is that this procedure is taking longer and longer to run.Up to 5 hours now! It is anaylizing about 30,000 records. I thinkpartly because we add new records every month.The procedure works like this.The first Cursor stores a unique account and duedate combination fromthe view.It then finds all the accts in the view that have that account duedatecombo and loads them into Cursor 2 this groups them together for datamanipulation. The accounts have to be grouped this way because aaccount can have different due dates and multiple records within eachaccount due date combo and they need to be looked at this way aslittle singular groups.Here is my procedure I hope someone can shead some light on this. Myboss is giving me heck about it. (I think he thinks Girls cant code!)I got this far I hope someone can help me optimize it further.CREATE PROCEDURE dbo.sp_PromiseStatusASBEGINSET NOCOUNT ON/* Global variables */DECLARE @tot_pay moneyDECLARE @rec_upd VARCHAR(1)DECLARE @todays_date varchar(12)DECLARE @mActivityDate2_temp datetimeDECLARE @tot_paydate datetime/* variables for cursor ACT_CUR1*/DECLARE @mAcct_Num1 BIGINTDECLARE @mDueDate1 datetime/* variables for ACT_CUR2 */DECLARE @mAcct_Num2 BIGINTDECLARE @mActivity_Date2 datetimeDECLARE @mPromise_Amt_1 moneyDECLARE @mPromise_Status varchar(3)DECLARE @mCurrent_Due_Amt moneyDECLARE @mDPD intDECLARE @mPromise_Date datetimeSELECT @todays_date =''+CAST(DATEPART(mm,getdate()) AS varchar(2))+'/'+CAST(DATEPART(dd,getdate()) AS varchar(2))+'/'+CAST(DATEPART(yyyy,getdate()) AS varchar(4))+''DECLARE ACT_CUR1 CURSOR FORSELECT DISTINCTA.ACCT_NUM,A.DUE_DATEFROM VWAPPLICABLEPROMISEACTIVITYRECORDS AOPEN ACT_CUR1FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1WHILE (@@FETCH_STATUS = 0)BEGINSELECT @rec_upd = 'N 'DECLARE ACT_CUR2 CURSOR FORSELECTB.ACCT_NUM,B.ACTIVITY_DATE,B.PROMISE_AMT_1,B.PROMISE_STATUS,B.CURRENT_DUE_AMT,B.DAYS_DELINQUENT_NUM,B.PROMISE_DATE_1FROM VWAPPLICABLEPROMISEACTIVITYRECORDS B (UPDLOCK)WHERE B.ACCT_NUM = @mAcct_Num1ANDB.DUE_DATE = @mDueDate1ORDER BY B.ACCT_NUM,B.DUE_DATE,B.ACTIVITY_DATE,CASEB.Time_ObtainedWHEN 0 THEN 0ELSE 1END Desc, B.Time_ObtainedOPEN ACT_CUR2FETCH NEXT FROM ACT_CUR2INTO @mAcct_Num2 ,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateWHILE (@@FETCH_STATUS = 0)BEGIN----CHECK------------------------------------------------------------------------DECLARE @PrintVariable2 VARCHAR (8000)--SELECT @PrintVariable2 = CAST(@MACCT_NUM2 AS VARCHAR)+''+CAST(@MACTIVITY_DATE2 AS VARCHAR)+' '+CAST(@MPROMISE_AMT_1 ASVARCHAR)+' '+CAST(@MPROMISE_STATUS AS VARCHAR)+''+CAST(@mCurrent_Due_Amt AS VARCHAR)+' '+CAST(@mDPD AS VARCHAR)+''+CAST(@mPromise_Date AS VARCHAR)--PRINT @PrintVariable2----ENDCHECK------------------------------------------------------------IF @mDPD >= 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE < @mActivity_Date2 + 15----CHECK------------------------------------------------------------------------DECLARE @PrintVariable3 VARCHAR (8000)--SELECT @PrintVariable3 ='Greater=30 DOLLARS COLLECTED'--PRINT @PrintVariable3----ENDCHECK------------------------------------------------------------ENDELSE IF @mDPD < 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE BETWEEN @mActivity_Date2 AND@mPromise_Date + 5----CHECK----------------------------------------------------------------------DECLARE @PrintVariable4 VARCHAR (8000)--SELECT @PrintVariable4 ='Less 30 DOLLARS COLLECTED'--PRINT @PrintVariable4----END CHECK------------------------------------------------------------END----------------------------------------MY REVISEDLOGIC-------------------------------------------------------IF @rec_upd = 'N'BEGINIF @mDPD >= 30BEGINSELECT @mActivityDate2_temp = @mActivity_Date2 + 15--DECLARE @PrintVariable5 VARCHAR (8000)--SELECT @PrintVariable5 =' GREATER= 30 USING ACTVITY_DATE+15'--PRINT @PrintVariable5ENDELSE IF @mDPD < 30BEGINSELECT @mActivityDate2_temp = @mPromise_Date + 5--DECLARE @PrintVariable6 VARCHAR (8000)--SELECT @PrintVariable6 =' LESS 30 USING PROMISE_DATE+5'--PRINT @PrintVariable6ENDIF @tot_pay >= 0.9 * @mCurrent_Due_Amt--used to be promise amtBEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET PROMISE_STATUS = 'PK',TOTAL_DOLLARS_COLL = @tot_payWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PK.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDSELECT @rec_upd = 'Y 'ENDIF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay IS NULL)AND( @mActivityDate2_temp > @todays_date )--need to put 1dayof month here for snapshot9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'OP'WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto OP which is the original Activity Date.--The record will hold this date until it goes into PK,PB,orIP.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @mActivity_Date2WHERE CURRENT OF ACT_CUR2ENDENDELSE IF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay ISNULL)AND( @mActivityDate2_temp <= @todays_date )--need to put 1dayof month here for snapshot 9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'PB',TOTAL_DOLLARS_COLL = case when @tot_pay is nullthen 0 else @tot_pay endWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PB.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDENDELSE IF @rec_upd = 'Y'BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'IP',TOTAL_DOLLARS_COLL = 0WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto IP.IF @mPromise_Status NOT IN ('IP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDFETCH NEXT FROM ACT_CUR2 INTO @mAcct_Num2,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateENDCLOSE ACT_CUR2DEALLOCATE ACT_CUR2FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1ENDCLOSE ACT_CUR1DEALLOCATE ACT_CUR1SET NOCOUNT OFFENDGO
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I want find that the ntext column data string have more than 2000 characters. I need to truncate those string to segment with 200 character, then put those segments along with their table_name and column_name to another table. Maybe need to use cursor? If so, how to use it?
Why need to open CURSOR in the part in which a procedure is created?
The following codes are listed in the Microsoft SQL Server 2005 BOOKS ONLINE.
(1)
USE AdventureWorks; GO IF OBJECT_ID ( 'dbo.currency_cursor', 'P' ) IS NOT NULL DROP PROCEDURE dbo.currency_cursor; GO CREATE PROCEDURE dbo.currency_cursor @currency_cursor CURSOR VARYING OUTPUT AS SET @currency_cursor = CURSOR FORWARD_ONLY STATIC FOR SELECT CurrencyCode, Name FROM Sales.Currency; OPEN @currency_cursor;
GO
(2)
USE AdventureWorks; GO DECLARE @MyCursor CURSOR; EXEC dbo.currency_cursor @currency_cursor = @MyCursor OUTPUT; WHILE (@@FETCH_STATUS = 0) BEGIN; FETCH NEXT FROM @MyCursor; END; CLOSE @MyCursor; DEALLOCATE @MyCursor; GO
can someone tell me how to use static cursor to read the rows applying it in procedure. i have input and output tables i will have to use input table to read data and then in procedure update/insert into output table ) insert values from input and dditioanl calulate charges. ok, there is my problem: An Internet service provider has three different subscription packages for its customers:
Package A: For $15 per month with 50 hours of access provided. Additional hours are $2.00 per hour over 50 hours. Assume usage is recorded in one-hour increments, i.e., a 25-minute session is recorded as one hour.
Package B: For $20 per month with 100 hours of access provided. Additional hours are $1.50 per hour over 100 hours.
Package C: For $25 per month with 150 hours access is provided. Additional hours are $1.00 per hour over 150 hours
Assume a 30-day billing cycle.
1) Create a table to hold customer input billing data.
2) Populate input table with follwing records:
CustomerID Pkg Hours ---------- --- ------ 1000 A 49 1010 A 50 1020 a 90 1030 a 130
1090 B 40 1100 B 99 1110 b 100 1120 b 145
1140 C 45 1150 c 85 1160 c 149 1170 c 150 1180 c 200
3) Create a table to hold customer data used to generate the statement to be sent to the customer. It should include CustomerID, Package, HoursUsed, and Charges.
Write an SQL script that reads customer billing data, calculates a customer’s monthly charges, and populates the customer statement table. Use Cursor to process records and Stored Procedures for ProcessBill and calcCharges.
insert into custinput values (1000,'A',49); insert into custinput values (1010,'A',50); insert into custinput values (1020,'a',90); insert into custinput values (1030,'a',130); insert into custinput values (1090,'B',40); insert into custinput values (1100,'B',99); insert into custinput values (1110,'b',100); insert into custinput values (1120,'b',145);
insert into custinput values (1140,'C',45); insert into custinput values (1150,'c',85);
insert into custinput values (1160,'c',149); insert into custinput values (1170,'c',150); insert into custinput values (1180,'c',200);
then there is conditions:
if upper (@pkg)= 'A' begin if @hrs<= 50 set @charges =15 else set @charges =15 + (@hrs-50)*2
end;
else if upper(@pkg)= 'B' begin if @hrs <= 100 set @charges = 20 else set @charges = 20 + (@hrs - 100)*1.5
end; else
if @hrs <=150 set @charges = 25 else set @charges =25+(@hrs-150)
insert into custoutput values(@cust_id,@pkg,@hrs,@charges)
Hello:I want find that the ntext column data string have more than 2000 characters. I need to truncate those string to the segments with 200 character, then put those segments along with their table_name and column_name to another table. Maybe need to use cursor? If so, how to use it?
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
HI, WHILE DECLARING A CURSOR TO SELECT RECORDS FROM A TABLE WE NORMALLY WRITE :-
DECLARE CUR_NAME CURSOR FOR SELECT * FROM CLEANCUSTOMER
BUT SAY, IF I HAVE WRITTEN A SIMPLE PROCEDURE CALLED AS MY_PROC :-
CREATE PROCEDURE MY_PROC AS SELECT A.INTCUSTOMERID,A.CHREMAIL,B.INTPREFERENCEID,C.CHR PREFERENCEDESC FROM CLEANCUSTOMER A INNER JOIN TRCUSTOMERPREFERENCE03JULY B ON A.INTCUSTOMERID = B.INTCUSTOMERID INNER JOIN TMPREFERENCE C ON B.INTPREFERENCEID = C.INTPREFERENCEID ORDER BY B.INTPREFERENCEID
WHICH IS RUNNING FINE AND GIVING ME THE REQUIRED DATA WHILE EXECUTING THE PROCEDURE :-
EXEC MY_PROC
BUT IF I WANT TO CALL THIS PROCEDURE MY_PROC WHILE DECLARING A CURSOR :-
I AM USING :-
DECLARE CHK_CUR CURSOR FOR SELECT * FROM MY_PROC
WHICH IS GIVING AN ERROR "Invalid object name 'MY_PROC'."
AND IF I USE :-
DECLARE CHK_CUR CURSOR FOR EXEC MY_PROC
WHICH IS GIVING AN ERROR "Incorrect syntax near the keyword 'EXEC'".
AND IF I USE :-
DECLARE CHK_CUR CURSOR FOR CALL MY_PROC
WHICH IS GIVING AN ERROR "Incorrect syntax near 'CALL'. "
IS THERE ANY WAY BY WHICH I CAN FETCH RECORDS FROM THE STORED PROCEDURE? HOW DO I DECLARE THE PROCEDURE WHILE WRITING THE CURSOR PLS HELP.
I NEED THIS URGENTLY, I HAVE TO USE THE CURSOR TO FETCH THE RECORDS FROM THE SP,THAT'S HOW THEY WANT IT.I CAN'T HELP IT AND I DON'T KNOW HOW
i m new in sql...and i have this procedure..which have cursor inside..
1. i want to get all distinct date into #tempt table. 2. In the loop for each distinct date fetch all the date into another #temp 3. get max date from that #temp and use that date to get the data from original table
but i m getting 0 rows else all 8000 rows..which is wrong..can anyone help me plz...
create procedure procdate1 (@name varchar(50)) as begin SET NOCOUNT ON
DECLARE @MaxDate datetime DECLARE @Date datetime
select id, title, dated, CONVERT(CHAR(10), dated,101) as date, CONVERT(CHAR(8), dated,114) as time from general
where name = @name AND dated = @MaxDate
DECLARE CUR1 CURSOR FOR
SELECT @DATE FROM #tempt
OPEN CUR1
FETCH NEXT FROM CUR1 INTO @Date
WHILE @@FETCH_STATUS = 0 BEGIN
SELECT dated INTO #Date1 FROM general WHERE CONVERT(CHAR(10),dated,101) = @Date SELECT @MaxDate = MAX(dated) FROM #date1
--DROP TABLE #Date1
FETCH NEXT FROM CUR1 INTO @Date continue CLOSE CUR1 DEALLOCATE CUR1 end -- DROP TABLE #tempt end
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
