I am running Sql Server 2005, When I create a new stored procedure and try to save it, I'm prompted with the 'save file as dialog'. Is'nt the stored procedure suppose to be saved within the database?
View 2 RepliesGreetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
In Microsoft SQL Server Management Studio Express you can right click on "Stored Procedures" under a database in the object explorer and the resulting Context Menu offers a selection called "New Stored Procedure".
If you select "New Stored Procedure", a Stored Procedure Template Document is added for editing. It has the suffix ".sql"; I can save this document to the file system after I edit it, but I cannot figure out how to add it to the database as a Stored Procedure.
Can someone please tell me how to do this.
Thank you.
Hi!
I'm using VS2005 and trying to save my very simple stored procedure.The error message "Invalid object name 'dbo.xxxxx' just pop's up.
The SP is written through the Server Explorer > Stored Procedures > Add new.... etc.Using SQL server 2000.
Don't think this has to do with the SP-code but here it is:
ALTER PROCEDURE dbo.KontrollUnikPersNr@PersNr nvarchar(50) = null OUTPUTASSELECT @PersNr = PersNr FROM User WHERE PersNr = @PersNrRETURN @@ROWCOUNT
Thanx i advance for any help!
Hi, I have created a store procedure and want to save them. this is wha ti did.
I clicked on the Northwind--> Programm--> Stored Procedure-- > right clicked --> new stored procedure
after writing my stored procedure I saved it. But when I am saving I want to save it under the Stored Procedure folder
of the NorthWind database. I guess this is what it should do. When I use to use the sql 2000, i could always send my stored procedure here , i guess it was by default. But even if i save my sql stored procedure at any other location than at the run time, how the applicaiton will find my store procedure.
Well so thinking of that I have to save my stored procedure under the database for which table it is created however, i can not save it there. I tried to figure out the directly but I couldnt.
So any suggestion????
Hi,
i can make and save a stored procedure in Visual Web Developer (via Database Explorer). It appears then in the list op stored procedure in Management Sudio.
But how to do the same in Management Studio? When i make a sp and i want to save it, Management Studio asks me a name, but put the file in a Projects directory in 'My documents'. It never appears in the list of sp.
Thanks
tartuffe
Hi,
Recently, I started to move more databases from SQL Server 2000 to 2005, well the Stored Procedures in 2005 is hard to handle.
First of all, I created the new SP in Object Explorer, the "New Stored Procedure" query just created a new name under the Stored Procedures folder, then I have to re-open it to put in TSQL code.
After I put in the code in the new SP, if I click "Save", the File
Manager comes out to let me to save in a physical location (C: or D: or Network place...). But after I close and open the new SP, the code I put in there is not really in the new SP.
I know that I have to "Execute" the SP in order to save the change. But the problem is I don't want to run the code at this step, the SP is to get a lot of data transactions, I'll setup a "Job" to do this.
So, the question is: Is this the way to create and save a new SP? Is there any other way to save the code changes in the SP WITHOUT "Execute" it?
Please give me any advise, article or links to read.
Thanks.
I am null in Transact-SQL
Hello , I ve made a SQM request I would provide it result via stored stored procedure how can I do this ?
this is the request
SELECT DISTINCT Account.Name AS exp, Campaign.New_FormationIdName
FROM Email INNER JOIN
CampaignActivity ON Email.RegardingObjectId = CampaignActivity.ActivityId INNER JOIN
Account ON Email.ToRecipients = Account.EMailAddress1 INNER JOIN
Campaign ON CampaignActivity.RegardingObjectId = Campaign.CampaignId CROSS JOIN
New_Formation CROSS JOIN
New_formationparticipation MINUS
SELECT New_exportateurIdName, New_formationIdName
FROM new_formationparticipation
-An other ponit: How can I add a parameter to this stored procedure?
I am trying to save an uploaded image and its associated info to sql server database using a stored procedure but keep getting trouble. When trying to save, the RowAffected always return -1. but when i debug it, I dont' see problem both from stored procedure server
explore and codebehind. it looks to me every input param contains correct value(such as the uploaded image file name, contentType and etc). well, for the imgbin its input param value returns something like "byte[] imgbin={Length=516}". Below is my code, could anyone help to point out what did I do wrong?
Thank you.
================================================
CREATE PROCEDURE [dbo].[sp_SaveInfo]
(
@UserID varchar(12),
@Image_FileName nvarchar(50),
@Image_ContentType nvarchar(50),
@Image_ImageData image,
@Create_DateTime datetime)
AS
set nocount on
insert ExpertImage(UserID, Image_FileName, Image_ContentType, Image_ImageData, Image_ReceiveDateTime)
values(@UserID, @Image_FileName, @Image_ContentType, @Image_ImageData, @Create_DateTime)
GO
private void Submit1_ServerClick(object sender, System.EventArgs e)
{
if(Page.IsValid)
{
Stream imgStream = File1.PostedFile.InputStream;
int imgLen=File1.PostedFile.ContentLength;
string imgContentType = File1.PostedFile.ContentType;
string imgName = File1.PostedFile.FileName.Substring(File1.PostedFile.FileName.LastIndexOf("\") + 1);
byte[] imgBinaryData = new byte[imgLen];
int n=imgStream.Read(imgBinaryData, 0, imgLen);
int RowsAffected = SaveInfo(imgName,imgBinaryData, imgContentType);
if(RowsAffected > 0)
{
..
}
else
{
..
}
}
}
public int SaveInfo(string imgName, byte[] imgbin, string imgcontenttype)
{
SqlConnection objConn = new DSConnection().DbConn;
SqlCommand objCMD = new SqlCommand("sp_SaveInfo", objConn);
objCMD.CommandType = CommandType.StoredProcedure;
objCMD.Parameters.Add("@UserID", SqlDbType.VarChar, 12);
objCMD.Parameters["@UserID"].Value = txtMemberID.Text.ToString();
objCMD.Parameters["@UserID"].Direction = ParameterDirection.Input;
objCMD.Parameters.Add("@Create_DateTime", SqlDbType.DateTime);
objCMD.Parameters["@Create_DateTime"].Value = DateTime.Now.ToLongTimeString();
objCMD.Parameters["@Create_DateTime"].Direction = ParameterDirection.Input;
objCMD.Parameters.Add("@Image_FileName", SqlDbType.NVarChar, 50);
objCMD.Parameters["@Image_FileName"].Value = imgName;
objCMD.Parameters["@Image_FileName"].Direction = ParameterDirection.Input;
objCMD.Parameters.Add("@Image_ContentType", SqlDbType.NVarChar, 50);
objCMD.Parameters["@Image_ContentType"].Value = imgcontenttype;
objCMD.Parameters["@Image_ContentType"].Direction = ParameterDirection.Input;
objCMD.Parameters.Add("@Image_ImageData", SqlDbType.Image);
objCMD.Parameters["@Image_ImageData"].Value = imgbin;
objCMD.Parameters["@Image_ImageData"].Direction = ParameterDirection.Input;
int numRowsAffected = objCMD.ExecuteNonQuery();
return numRowsAffected;
}
We are collecting values in a string format with delimeteres and sending to DB .We would like to insert the data in Bulk insert format rather than splitting the same and then inserting..
In sql 2014 can we archive the same..sample format currently we are getting the client is like this is
Saleid$ salename$month$year$totalsale#Saleid$salename$month$year$totalsale# has a dataset.
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies View RelatedI have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
is it possible to insert record into second database from a stored procedure which is in first database?
View 1 Replies View RelatedI am wondering if there is a way to create a procedure in a logging database that can identify the source database from which it is invoked. DB_NAME() of course returns the name of the database in which the stored procedure exists. I could pass the database name as a parameter to the proc, just wondering if there is another way.
This is SQL 2005, I did look into the sys.dm_exec views but nothing seems to have a dbid reflecting the calling context.
Thanks,
Mike
I have a stored procedure that is located in one database and I would like to have it execute against a different database. My problem is when I go to execute it, it is still executing against the database it is stored in. Is it possible to tell this stored procedure when it runs to execute its code against this second database?
This is what I have now, which isn't working:
Code Snippet
use [Database2]
exec [Database1].[dbo].usp_SetupDatabaseUser
The end result still executes against Database1.
Thanks for any advice,
Flea#
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi,
I have a set of databases. Each user had his own database. Every database had the same stored procedures. The is one "admin" database where content about these users is stored.
When I want to update or change a stored procedure I have to update it in every database. Therefore I want to put the stored procedures in the "admin" database. From there I have to access the databases of the user. I want to send the database name as a parameter.
How can I change de database which te procedure should access?
If I use the "use" statement I complains about that I can't use that command in a stored procedure. I've tried this method too:
SELECT * FROM @databasename.dbo.tblname
but that's not accepted too.
Does anybody know how to select another database in the stored procedure?
I would like to know , is there a way to save query results in word format.
Liek we use sp_makewebtask to save query output in html format.
Thanks
Hi,
I was trying to save the Stored Procedures; however, SQL Server would not save it and gave me the "Error 259: (SQL Server) Ad-hoc updates to system catalogs not enabled. System Administrator must reconfigure system to allow this."
Does anyone know what to do with this error? I went search the error in the Microsoft TechNet Website and did not get any resolution.
Many Thanks in advance!
Choco
In SQL Server 2000 when we use to create a new procedure it was saved in Management Consule, but when I create a new procedure and wants to save it SQL Server 2005 (Management Console) ... it saved like a query on my local drive ... I am confused what to do ... if i save it on local drive then how can i call it when required.
Thanks in Advance ...
When I create/alter a store procedure in SQL Server 2005, SQL server always checks for syntax errors first and won't let me save the change if it detects any error. Is there a way we can force the SQL server to save the store procedure that fails the syntax check?
I know SQL server will allow such invalid store procedures if you detach & re-attach the entire database from one SQL server to another server. However, if I try to manually create the same store procedure from one server on a different server with a script, then it won€™t let you save the store procedure if the linked server (or the table) can€™t be accessed from the new sql server.
How do you get around this?
Thanks
Hi there :)
I was hoping someone could help me figure out why this doesn't work....
I have a class called ProductsDB with a method called AddProduct that looks like this:
public String AddProduct(int categoryID, int makeID, string name, double price, double saleprice, double offerprice, int homepage, string thumbpath, string imagepath, string description)
{
// Create Instance of Connection and Command Object
SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);
SqlCommand myCommand = new SqlCommand("ProductsAdd", myConnection);
// Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure;
// Add Parameters to SPROC
SqlParameter parameterCategoryID = new SqlParameter("@CategoryID", SqlDbType.Int, 4);
parameterCategoryID.Value = categoryID;
myCommand.Parameters.Add(parameterCategoryID);
SqlParameter parameterMakeID = new SqlParameter("@MakeID", SqlDbType.Int, 4);
parameterMakeID.Value = makeID;
myCommand.Parameters.Add(parameterMakeID);
SqlParameter parameterName = new SqlParameter("@Name", SqlDbType.NVarChar, 50);
parameterName.Value = name;
myCommand.Parameters.Add(parameterName);
SqlParameter parameterPrice = new SqlParameter("@Price", SqlDbType.Money, 8);
parameterPrice.Value = price;
myCommand.Parameters.Add(parameterPrice);
SqlParameter parameterSalePrice = new SqlParameter("@SalePrice", SqlDbType.Money, 8);
parameterSalePrice.Value = saleprice;
myCommand.Parameters.Add(parameterSalePrice);
SqlParameter parameterOfferPrice = new SqlParameter("@OfferPrice", SqlDbType.Money, 8);
parameterOfferPrice.Value = offerprice;
myCommand.Parameters.Add(parameterOfferPrice);
SqlParameter parameterHomepage = new SqlParameter("@Homepage", SqlDbType.Bit, 1);
parameterHomepage.Value = homepage;
myCommand.Parameters.Add(parameterHomepage);
SqlParameter parameterThumbnail = new SqlParameter("@Thumbnail", SqlDbType.NVarChar, 50);
parameterThumbnail.Value = thumbpath;
myCommand.Parameters.Add(parameterThumbnail);
SqlParameter parameterImage = new SqlParameter("@Image", SqlDbType.NVarChar, 50);
parameterImage.Value = imagepath;
myCommand.Parameters.Add(parameterImage);
SqlParameter parameterProductID = new SqlParameter("@ProductID", SqlDbType.Int, 4);
parameterProductID.Direction = ParameterDirection.Output;
myCommand.Parameters.Add(parameterProductID);
try
{
myConnection.Open();
myCommand.ExecuteNonQuery();
myConnection.Close();
// Calculate the ProductID using Output Param from SPROC
int productId = (int)parameterProductID.Value;
return productId.ToString();
}
catch
{
return String.Empty;
}
}
And then in another cs file for my aspx page I have an event handler for an add button in a webform, which looks like this:
// Add New Product to ProductDB database
bikescene.Components.ProductsDB accountSystem = new bikescene.Components.ProductsDB();
String productId = accountSystem.AddProduct(Int32.Parse(DDLproductcategory.SelectedValue), Int32.Parse(DDLproductmanufacturer.SelectedValue), TBproductname.Text, Double.Parse(TBproductprice.Text), Double.Parse(TBproductsaleprice.Text), Double.Parse(TBproductofferprice.Text), Int32.Parse(DDLproducthomepage.SelectedValue), thumbnailpath, imagepath, TBproductdescription.Text);
And finally, here is my stored procedure:
CREATE Procedure ProductsAdd
(
@ProductID int,
@CategoryID int,
@MakeID int,
@Name nvarchar(50),
@Price money,
@SalePrice money,
@OfferPrice money,
@Homepage int,
@Thumbnail nvarchar(50),
@Image nvarchar(50),
@Description nvarchar(500)
)
AS
INSERT INTO Products
(
productID,
categoryID,
makeID,
name,
price,
saleprice,
offerprice,
homepage,
thumbpath,
imagepath,
description
)
VALUES
(
@ProductID,
@CategoryID,
@MakeID,
@Name,
@Price,
@SalePrice,
@OfferPrice,
@Homepage,
@Thumbnail,
@Image,
@Description
)
SELECT
@ProductID = @@Identity
GO
Basically, my images are uploaded to the server just fine but nothing is being added to the database + I don't get any error messages.
Any ideas?
Many thanks indeed :)
I am trying to write a stored procedure that has an inner join between two tables from two different databases on the same sql server.
Something like...
Select * FROM
DB1-table1 INNER JOIN DB2-table1
ON DB1-table1.ID = DB2-table1.ID
yada yada yada.......
Does anyone know how to do this or is it possible? If so, what database should I put the stored procedure in or does it matter?
We are trying to develop some standards for SQL stored procedures and I am wandering what is the preferrable method to reference a table within a stored procedure for use within a Client Server / Web OLTP.
One:
SELECT Customer_Id, Customer_Name FROM CUSTOMER
Or TWO:
SELECT Customer_Id, Customer_Name FROM [DATABASENAME].[dbo].[CUSTOMER]
Most of my background is in working with data warehousing which is constantly loading between a staging and main DB, so I am in the habit of using TWO, but is this the best method for an OLTP and why.
Thanks
Loren
Hi all,
I want to use a stored procedure to access data in different databases. I was wondering if it is possible to pass the database name to the stored procedure as a parameter and use it in the sql statement.
Thank you for all the help you can give me.
Regards,
Eve
I have created a stored procedure in the master database that can be run against any database on the server.
I call this procedure from a sql server agent job. In this job I specify the database I want the procedure to run against but it always seems to run against the master database (presumably because the procedure is in this database). I can't switch database inside the procedure so what can I do other than creating a copy of the procedure in every database?
Hi all,
I have an urgent problem. Can a stored procedure create a connection or access data from another database?
Thanks in advace. :)
hey guyz...
i used this stored procedure code my system.. but it crashes saying "exclusive access could not be obtained becuase the database is in use"
i have included the stored procedure below. is the stored procedure correct?
if it is.. how can i sovle this problem?
CREATE Procedure spRestoreDatabase
@Path VARCHAR(100)
AS
Restore Database Test From Disk = @Path
GO
Hi. I'm trying to write a stored procedure that will access another database on a different server. How can I set this up in a stored procedure? It is a SQL Server 2000 database and it will be using SQL server authentication. Thanks!
View 3 Replies View RelatedIs it possible to use a stored procedure to script an entire database in MS SQL 2000?
View 8 Replies View RelatedI am trying to create a database within a stored procedure, so that the database name is generated each time. Please review the attached code, as sql seems to error out on '@dname'
select @iStatus = 0
select @dbname = 'offline' + '_' + convert(char(6),getdate(),112)
create database @dbname
on
( name = @dbname + 'data',
filename = 'F:MSSQLData' + @dbname + 'data.mdf',
size = 10mb,
filegrowth = 10% )
log on
( name = @dbname + 'log',
filename = 'F:MSSQLData' + @dbname + 'log.ldf',
size = 5mb,
filegrowth = 10% )
select @iStatus = @@error
if @iStatus = 0
print 'Part 1: Database offline_' + @dbname + 'has been created successfully'
else
print 'Part 1: Database Offline_' + @dbname + 'failed to create, status ' + convert(varchar(10), @iStatus)
end
How do I correctly query from a different database table in a stored procedure?
Here is the procedure:
CREATE PROCEDURE spInsertRegistration
@firstname varchar(25),
@lastname varchar(25),
@job_title varchar(50),
@manager varchar(50),
@cost_center char(3),
@address varchar(50),
@city varchar(50),
@state_id INT,
@zip char(5),
@email varchar(50),
@phone char(10),
@roommate varchar(50),
@arrival datetime,
@departure datetime,
@special_needs varchar(500),
@result INT OUTPUT
AS
DECLARE @stateabr VARCHAR(2)
SET @result=0
SELECT @stateabr=state_abr FROM Public.dbo.state WHERE state_id=@state_id
INSERT INTO registration_form
VALUES(@firstname,@lastname,@job_title,@manager,@cost_center,@address,@city,@stateabr,@zip,@email,@phone,@roommate,@arrival,@departure,@special_needs)
IF @@rowcount>0
SET @result=1
GO
This is the specific line where I'm trying to access a different database:
SELECT @stateabr=state_abr FROM Public.dbo.state WHERE state_id=@state_id
Thank you.
how can we use 2 databases in 1 stored procedure.
like for example i want to get records from 1 table and insert it to other tables in another database.
thnx for the help.