Stored Procedure Only Part Running
Dec 10, 2001
I am calling a SQL Server 6.5 Stored Procedure from Access 2000 with the following code :-
Public Function CheckDigitCalc()
Dim conn As New ADODB.Connection
Dim cmd As New ADODB.Command
On Error GoTo TryAgain
conn.Open "DSN=WEB;uid=sa;pwd=;DATABASE=WEB;"
Set cmd.ActiveConnection = conn
cmd.CommandText = "SPtest2"
cmd.CommandType = adCmdStoredProc
cmd.Execute
MsgBox "Numbers created OK.", vbOKOnly
Exit Function
TryAgain:
MsgBox "Error occurred, see details below :-" & vbCrLf & vbCrLf & _
Err & vbCrLf & vbCrLf & _
Error & vbCrLf & vbCrLf, 48, "Error"
End Function
The MsgBox pops up indicating that the Stored Procedure has run, and there are no errors produced by either SQL Server or Access. However, when I inspect the results of the Stored Procedure, it has not processed all the records it should have. It appears to stop processing after between 6 and 11 records out of a total of 50. The wierd thing is that if I execute the procedure on the server manually, it works perfectly. HELP ME IF U CAN ! THANKS.
View 2 Replies
ADVERTISEMENT
Aug 3, 2001
Joe, thank you for the answer to my post.
Can I also use a
SELECT field1 FROM DBName.dbo.TableName with a "VIEW" in this other database (that's on the same server)?
Also, in my sp, I have the following:
SELECT DISTINCT Store.[DemoID#], Progstats.ProgramName, Progstats.[Program#], ZCHAIN.STR_NAME, ZCHAIN.[STR#], ZCHAIN.ADDRESS,
ZCHAIN.City, ZCHAIN.ST, ZCHAIN.ZIP, ZCHAIN.[PHONE#], Store.D1, Store.Status, Store.AgencyCompleted,
Store.Reason, Store.LeadName, Store.DemonstratorName, Store.UpdatedOnline
FROM (Store INNER JOIN Progstats ON Store.[Program#] = Progstats.[Program#]) INNER JOIN ZCHAIN ON Store.[TD#] = ZCHAIN.[ID#]
WHERE (((Store.[DemoID#])=@DemoID)) AND Progstats.Status=1;
GO
ZCHAIN has now become this "VIEWZCHAIN" in this other database. So, could I simply relace "ZCHAIN" with "DB2.dbo.VIEWZCHAIN.STR_NAME" which is actually now a 4-part name?
Thanks,
John Wilson
View 1 Replies
View Related
Apr 23, 2005
Hi,
I'm converting some direct SQL queries into stored procedures. The
original queries have conditional parts appended depending on certain
parameters like this:
Sql = "First part"
If certain condition then
Sql &= "Second part"
Endif
How could I do this in a stored procedure? So far I have made them like this:
IF @condition > 0
Fist part Second part
ELSE
First part
You can see that I have to maintain 'First part' in two locations. What is a better way of dealing with this?
Thanks!
Noc
View 3 Replies
View Related
Jan 23, 2008
Hi Jonathan Kehayias, Thanks for your valuable response.
I had a hard time to sumbit my reply in that original thread yesterday. So I created this new thread.
Here is my response to the last code/instruction you gave me:
I corrected a small mistake (on Integrated Security-SSPI and executed the last code you gave me.
I got the following debug error message:
1) A Box appeared and said: String or binary data would be truncated.
The statement has been terminated.
|OK|
2) After I clicked on the |OK| button, the following message appeared:
This "SqlException was unhandled
String or binary data would be truncated.
The statement has been terminated."
is pointing to the "Throw" code statement in the middle of
.......................................
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
..........
Please help and advise how to correct this problem in my project that is executed in my VB 2005 Express-SQL Server Management Studio Express PC.
Thanks,
Scott Chang
The code of my Form1.vb is listed below:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=shcDB;Integrated Security=SSPI;"
Dim connection As SqlConnection = New SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("sp_insertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@procPersonID", SqlDbType.Int).Value = 7
command.Parameters.Add("@procFirstName", SqlDbType.NVarChar).Value = "Craig"
command.Parameters.Add("@procLastName", SqlDbType.NVarChar).Value = "Utley"
command.Parameters.Add("@procAddress", SqlDbType.NVarChar).Value = "5577 Baltimore Ave"
command.Parameters.Add("@procCity", SqlDbType.NVarChar).Value = "Ellicott City"
command.Parameters.Add("@procState", SqlDbType.NVarChar).Value = "MD"
command.Parameters.Add("@procZipCode", SqlDbType.NVarChar).Value = "21045"
command.Parameters.Add("@procEmail", SqlDbType.NVarChar).Value = "CraigUtley@yahoo.com"
Dim resulting As String = command.ExecuteNonQuery
MessageBox.Show("Row inserted: " + resulting)
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
InsertNewFriend()
End Sub
End Class
View 6 Replies
View Related
Mar 21, 2004
Hi
I am trying to upload an excel file into a sql server database. I uploading the spreadsheet from an asp.net page and then running the dts froma stored procedure. But it doesn't work, I am totally lost on what I am doing wrong.
Any help would be greatly appreciated.
Asp.net code;
Dim oCmd As SqlCommand
oCmd = New SqlCommand("exportData", rtConn)
oCmd.CommandType = CommandType.StoredProcedure
rtConn.Open()
With oCmd
.CommandType = CommandType.StoredProcedure
Response.write("CommandType.StoredProcedure")
End With
Try
oCmd.ExecuteNonQuery()
Response.write("ExecuteNonQuery")
Finally
rtConn.Close()
End Try
StoredProcedure;
CREATE PROCEDURE exportData AS
Exec master..xp_cmdshell
'DTSRUN /local/DTS_ExamResults'
GO
Thanks
Rachel
View 4 Replies
View Related
Nov 3, 2006
I've set up a linked server between my SQL 2005 server and my AS400 DB2 server. I can query data successfully.
How do i call a DB2 stored procedure?
View 1 Replies
View Related
Jan 3, 2005
Hi Guys & Gals
I'm having problems running a stored procedure, I'm getting an error that I don't understand. My procedure is this:
ALTER PROC sp_get_allowed_growers
@GrowerList varchar(500)
AS
BEGIN
SET NOCOUNT ON
DECLARE @SQL varchar(600)
SET @SQL =
'SELECT nu_code, nu_description, nu_master
FROM nursery WHERE nu_master IN (' + @GrowerList + ') ORDER BY nu_code ASC'
EXEC(@SQL)
END
GO
and the code I'm using to execute the procedure is this:
public DataSet GetGrowers(string Username)
{
System.Text.StringBuilder UserRoles = new System.Text.StringBuilder();
UsersDB ps = new UsersDB();
SqlDataReader dr = ps.GetRolesByUser(Username);
while(dr.Read())
{
UserRoles.Append(dr["RoleName"]+",");
}
UserRoles.Remove(UserRoles.Length-1,1);
//Create instance of Connection and Command objects
SqlConnection transloadConnection = new SqlConnection(ConfigurationSettings.AppSettings["connectionStringTARPS"]);
SqlDataAdapter transloadCommand = new SqlDataAdapter("sp_get_allowed_growers",transloadConnection);
//Create and fill the DataSet
SqlParameter paramList = new SqlParameter("@GrowerList",SqlDbType.VarChar);
paramList.Value = UserRoles.ToString();
transloadCommand.SelectCommand.Parameters.Add(paramList);
DataSet dsGrowers = new DataSet();
transloadCommand.Fill(dsGrowers);
return dsGrowers;
}
The UserRoles stringbuilder has an appropriate value when it is passed to the stored procedure. When I run the stored procedure in query analyser it runs just fine. However, when I step through the code above, I get the following error:
Line 1: Incorrect syntax near 'sp_get_allowed_growers'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'sp_get_allowed_growers'.
Anyone with any ideas would be very helpful...
View 6 Replies
View Related
Aug 2, 2007
hi,
i'm using SQL server 2000. i'm getting the below error when i run a store procedure.
"Specified column precision 500 is greater than the maximum precision of 38."
I have created a temporary table inside the stored procedure inserting the values by selecting the fields from other table. mostly i have given the column type as varchar(50) and some fields are numeric(50).
View 2 Replies
View Related
Feb 5, 2008
How can I find out if a stored procedure is currently being executed?
sp_who2 and sys.sysprocesses, Command, Cmd fields just gives me parts of the sql inside the stored procedure.
View 5 Replies
View Related
Jan 9, 2008
We have a stored procedure which is running fine on a SQL server 2000 from Query Analyzer. However, when we try to execute the same stored procedure from ADO.NET in an executable, the execution is hung or takes extremely long. Does anyone have any ideas or suggestions about how it could happen and how to fix. thanks
View 22 Replies
View Related
Apr 14, 2008
Hi,
I'm not sure if this is really the right place for this but it is related to my earlier post. Please do say if you think I should move it.
I created a Stored procedure which I want to run from Visual basic (I am using 2008 Express with SQL Sever 2005 Express)
I have looked through many post and the explaination of the sqlConection class on the msdn site but I am now just confussed.
Here is my SP
ALTER PROCEDURE uspSelectBarItemID2
(
@BarTabID INT,
@DrinkID INT,
@ReturnBarItemID INT OUTPUT
)
AS
BEGIN
SELECT @ReturnBarItemID = barItemID
FROM [Bar Items]
WHERE (BarTabID = @BarTabID) AND (DrinkID = @DrinkID)
END
In VB I want to pass in the BarTabID and DrinkID varibles (Which Im grabbing from in as int variables) to find BarItemID in the same table and return it as an int.
What I dont understand is do I have to create a unique connection to my database because it is already liked with a dataset to my project with a number of BindingSources and TableAdapters.
Is there an easier way, could I dispense with SP and just use SQL with the VB code, I did think the SP would be neater.
Cheers.
View 11 Replies
View Related
Feb 14, 2007
HI all, I'd like to run a simple stored procedure on the Event of a button click, for which I don't need to pass any parameters, I am aware how to run a Stored Procedure with parameters, but I don't know how without, any help would be appreciated please.thanks.
View 6 Replies
View Related
Jun 25, 2007
I’m binding the distinct values from each of 9 columns to 9 drop-down-lists using a stored procedure. The SP accepts two parameters, one of which is the column name. I’m using the code below, which is opening and closing the database connection 9 times. Is there a more efficient way of doing this?
newSqlCommand = New SqlCommand("getDistinctValues", newConn)newSqlCommand.CommandType = CommandType.StoredProcedure
Dim ownrParam As New SqlParameter("@owner_id", SqlDbType.Int)Dim colParam As New SqlParameter("@column_name", SqlDbType.VarChar)newSqlCommand.Parameters.Add(ownrParam)newSqlCommand.Parameters.Add(colParam)
ownrParam.Value = OwnerID
colParam.Value = "Make"newConn.Open()ddlMake.DataSource = newSqlCommand.ExecuteReader()ddlMake.DataTextField = "distinct_result"ddlMake.DataBind()newConn.Close()
colParam.Value = "Model"newConn.Open()ddlModel.DataSource = newSqlCommand.ExecuteReader()ddlModel.DataTextField = "distinct_result"ddlModel.DataBind()newConn.Close()
and so on for 9 columns…
View 7 Replies
View Related
Feb 4, 2008
Hi,
I'm running a CLR stored procedure through my web using table adapters as follows:
res = BLL.contractRateAdviceAdapter.AutoGenCRA() 'with BLL being the business logic layer that hooks into the DAL containing the table adapters.
The AutoGen stored procedure runs fine when executed directly from within Management Studio, but times out after 30 seconds when run from my application. It's quite a complex stored procedure and will often take longer than 30 seconds to complete.
The stored procedure contains a number of queries and updates which all run as a single transaction. The transaction is defined as follows:
----------------------------------------------------------------------------------------------------------------------
options.IsolationLevel = Transactions.IsolationLevel.ReadUncommittedoptions.Timeout = New TimeSpan(1, 0, 0)
Using scope As New TransactionScope(TransactionScopeOption.Required, options)
'Once we've opened this connection, we need to pass it through to just about every
'function so it can be used throughout. Opening and closing the same connection doesn't seem to work
'within a single transactionUsing conn As New SqlConnection("Context Connection=true")
conn.Open()
ProcessEffectedCRAs(dtTableInfo, arDateList, conn)
scope.Complete()
End Using
End Using
----------------------------------------------------------------------------------------------------------------------
As I said, the code encompassed within this transaction performs a number of database table operations, using the one connection. Each of these operations uses it's own instance of SQLCommand. For example:
----------------------------------------------------------------------------------------------------------------------Dim dt As DataTable
Dim strSQL As StringDim cmd As New SqlCommand
cmd.Connection = conn
cmd.CommandType = CommandType.Text
cmd.CommandTimeout = 0Dim rdr As SqlDataReaderstrSQL = "SELECT * FROM " & Table
cmd.CommandText = strSQL
rdr = cmd.ExecuteReader
SqlContext.Pipe.Send(rdr)
rdr.Close()
----------------------------------------------------------------------------------------------------------------------
Each instance of SQLCommand throughout the stored procedure specifies cmd.CommandTimeout = 0, which is supposed to be endless. And the fact that the stored procedure is successful when run directly from Management studio indicates to me that the stored procedure itself is fine. I also know from output messages that there is no issues with the database connection.
I've set the ASP.Net configuration properties in IIS accordingly.
Are there any other settings that I need to change?
Can I set a timeout property when I'm calling the stored procedure in the first place?
Any advice would be appreciated.
Thanks
View 2 Replies
View Related
Mar 14, 2008
I am new to ASP.NET so please excuse what may seem like a dumb question.
I have a stored procedure that I need to run when the user clicks on our submit button. I am using Visual Studio 2005 and thought I could use the SqlDataSOurce Control. IS it possible to us the control or do I need to create a connection and call the stored procedure in the the button_click sub?
Thanks in advance
MF
View 6 Replies
View Related
May 9, 2008
Hi all, I wonder if you can help me with this. Basically, Visual Web Developer doesn't like this part of my code despite the fact that the stored procedure has been created in MS SQL. It just won't accept that bold line in the code below and even when I comment it just to cheat, it still gives me an error about the Stored Procedure. Here's the line of code: // Define data objects SqlConnection conn; SqlCommand comm; // Initialize connection string connectionString = ConfigurationManager.ConnectionStrings[ "pay"].ConnectionString; // Initialize connection conn = new SqlConnection(connectionString); // Create command comm = new SqlCommand("UpdatePaymentDetails", conn); //comm.CommandType = CommandType.StoredProcedure; // Add command parameters comm.Parameters.Add("PaymentID", System.Data.SqlDbType.Int); comm.Parameters["PaymentID"].Value = paymentID; comm.Parameters.Add("NewPayment", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewPayment"].Value = newPayment; comm.Parameters.Add("NewInvoice", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewInvoice"].Value = newInvoice; comm.Parameters.Add("NewAmount", System.Data.SqlDbType.Money); comm.Parameters["NewAmount"].Value = newAmount; comm.Parameters.Add("NewMargin", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewMargin"].Value = newMargin; comm.Parameters.Add("NewProfit", System.Data.SqlDbType.Money); comm.Parameters["NewProfit"].Value = newProfit; comm.Parameters.Add("NewEditDate", System.Data.SqlDbType.DateTime); comm.Parameters["NewEditDate"].Value = newEditDate; comm.Parameters.Add("NewQStatus", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewQStatus"].Value = newQStatus; comm.Parameters.Add("NewStatus", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewStatus"].Value = newStatus; // Enclose database code in Try-Catch-Finally try { conn.Open(); comm.ExecuteNonQuery(); }
View 7 Replies
View Related
Oct 4, 2005
I have a table with information about a mobile account in one table, a table for mobile plans, and a table for planfeatures. Each mobile account is associated with a planid, and may be associated with any combination of the features associated with that plan. The plan features are stored in a bridgetable which contains 'invoicedate' (date stamped on the invoice in question), 'subaccountnumber' (the cell phone number), 'planid', and 'featureid'. I've tested the UpdateMobileFeature sp directly from the SQL Profiler--it works fine on it's own. I use a stored procedure to fill the mobile table (called from aspx page), and since I use three of the four columns written above for both the mobilesub and the mobilefeature tables, I tried just adding the parameter which holds the featureid's to the sp to update the mobilesub table. Then I call the UpdateMobileFeature sp from the updatemobile sp. (The code in mobilesub that is not calling UpdateMobileDetail works well). All seems to work fine--nothing crashes or anything, but nothing is being added to the mobilefeature table. Here is the code:CREATE procedure usp_updatemobile( @InvoiceDate smalldatetime, @SubaccountNumber varchar(50), @PlanId int, @FeatureList varchar(500) --added for UpdateMobileFeatures. In the form of a comma-seperated list, to imitate an array. --***irrelevant parameters removed***--)
as
exec dbo.UpdateMobileFeature '@InvoiceDate','@SubaccountNumber','@PlanId','@FeatureList' --the apparently nonfunctional call
if exists ( //select for the mobile row in question ) Begin //update row
End
Else Begin //insert new row End
GOCREATE PROC dbo.UpdateMobileFeatures( @InvoiceDate smalldatetime, @SubaccountNumber varchar(50), @PlanID int, @FeatureList varchar(500))ASBEGIN SET NOCOUNT ON
CREATE TABLE #TempList ( InvoiceDate smalldatetime, SubaccountNumber varchar(50), PlanID int, FeatureID int )
DECLARE @FeatureID varchar(10), @Pos int SET @FeatureList = LTRIM(RTRIM(@FeatureList))+ ',' SET @Pos = CHARINDEX(',', @FeatureList, 1)
IF REPLACE(@FeatureList, ',', '') <> '' BEGIN WHILE @Pos > 0 BEGIN SET @FeatureID = LTRIM(RTRIM(LEFT(@FeatureList, @Pos - 1))) IF @FeatureID <> '' BEGIN INSERT INTO #TempList (InvoiceDate, SubaccountNumber, PlanID, FeatureID) VALUES (@InvoiceDate, @SubaccountNumber, @PlanID, CAST(@FeatureID AS int)) --Use Appropriate conversion END SET @FeatureList = RIGHT(@FeatureList, LEN(@FeatureList) - @Pos) SET @Pos = CHARINDEX(',', @FeatureList, 1)
END END
--SELECT o.FeatureID, CustomerID, EmployeeID, FeatureDate --FROM dbo.Features AS o -- JOIN -- #TempList t -- ON o.FeatureID = t.FeatureID
Insert Into MobileFeatures Select InvoiceDate, SubaccountNumber, PlanID, FeatureID From #TempList ENDGOHere is the method I used to call the first sp: (also with irrelevant stuff removed)public void saveCurrentMobile() {
calculateTotals();
InvoiceDataSet dataset = InvoiceDataSet.GetInstance();
SqlConnection conn = (SqlConnection)Session["connection"];
SqlCommand cmdUpdateMobile;
cmdUpdateMobile = new SqlCommand("usp_updatemobile", conn); cmdUpdateMobile.CommandType = CommandType.StoredProcedure;
SqlParameter invoicedate = cmdUpdateMobile.Parameters.Add("@InvoiceDate", SqlDbType.SmallDateTime); invoicedate.Value = DateTime.Parse(Request.Params["InvoiceDate"].ToString());
SqlParameter cellnumber = cmdUpdateMobile.Parameters.Add("@SubaccountNumber", SqlDbType.VarChar, 50); cellnumber.Value = txtCellNumber.Text.Trim();
SqlParameter plan = cmdUpdateMobile.Parameters.Add("@PlanId", SqlDbType.Int); plan.Value = planid;
SqlParameter featurelist = cmdUpdateMobile.Parameters.Add("@FeatureList", SqlDbType.VarChar, 500); featurelist.Value = planform.FeatureList;
//Response.Write(isthirdparty.ToString()); Response.Write(thirdpartycompany);
SqlParameter cycle = cmdUpdateMobile.Parameters.Add("@Cycle", SqlDbType.Int); cycle.Value = Convert.ToInt32(Request.Params["Cycle"]);
int returnvalue = runStoredProcedure(cmdUpdateMobile); //the sp is called within this method.
if (returnvalue != 0) { dataset.fillMobileTable(); Response.Write("Mobile Subaccount Saved!"); } }
View 3 Replies
View Related
Feb 21, 2000
I have a stored procedure being called from Visual Cafe 4.0 that takes over 30 minutes to run. Is there any way to backround this so that control returns to the browser that the JFC Applet is running in? The result set is saved to local disk and an email message sent to the user on completion.
Thanks, Dave.
View 2 Replies
View Related
Dec 13, 1999
I wrote a Stored Procedure I wish to run as a job. It inserts data to a linked server. The stored procedure runs fine from the sql query analyzer but fails as a job. There are no permissions assigned to this stored procedure as I beleive it runs under the context of sa which has default access granted.
Can someone give me some insite why this stored procedure won't run as a scheduled job?
ALTER PROCEDURE tsul_insertintolinkedserver
AS
DECLARE @srvname varChar(20)
SELECT @srvname = @@servername
insert into THOMAS.tsnet.dbo.usagelog
select id, tsgroup, account, error, failedpin, type, servername, ipbrowser, cid, logintime, expand , msgspresent, msgslistened, @srvname
from usagelog
where id >
( select max(id) from THOMAS.tsnet.dbo.usagelog
where hostserver = @srvname
)
Thanks in advance-
View 7 Replies
View Related
Mar 13, 2001
Hi
Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?
View 2 Replies
View Related
Jun 27, 2001
Is there a way to run/call a batch file from a stored procedure?
Or, is there a way to run/call a batch file from a trigger?
View 2 Replies
View Related
May 12, 2008
Hey guys!
I've come a huge ways with your help and things are getting more and more complicated, but i'm able to figure out a lot of things on my own now thanks to you guys! But now I'm REALLY stuck.
I've created a hierarchal listbox form that drills down From
Product - Colour - Year.
based on the selection from the previous listbox. i want to be able to populate a Grid displaying availability of the selected product based on the selections from the listboxes.
So i've written a stored procedure that selects the final product Id as an INPUT/OUTPUT based on the parameters PRODUCT ID - COLOUR ID - and YEAR ID. This outputs a PRODUCT NUMBER.
I want that product number to be used to populate the grid view. Is there away for me to do this?
Thanks in advanced everybody!
View 6 Replies
View Related
Jun 3, 2008
HI ALL
I have created a stored procedure for a routine task to be performed periodically in my application. Say, i want to execute my stored procedure at 12:00 AM daily.
How can I add my stored procedure to the SQL server agent jobs??
Any Idea..
View 1 Replies
View Related
Jul 20, 2005
in my procedure, I want to count the number of rows that have erroredduring an insert statement - each row is evaluated using a cursor, soI am processing one row at a time for the insert. My total count tobe displayed is inside the cursor, but after the last fetch is called.Wouldn't this display the last count? The problem is that the count isalways 1. Can anyone help?here is my code,.... cursor fetchbegin ... cursorif error then:beginINSERT INTO US_ACCT_ERRORS(ERROR_NUMBER, ERROR_DESC, cUSTOMERNUMBER,CUSTOMERNAME, ADDRESS1, ADDRESS2, CITY,STATE, POSTALCODE, CONTACT, PHONE, SALESREPCODE,PRICELEVEL, TERMSCODE, DISCPERCENT, TAXCODE,USERCOMMENT, CURRENCY, EMAILADDRESS, CUSTOMERGROUP,CUSTINDICATOR, DT_LOADED)VALUES(@ERRORNUM, @ERRORDESC,@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY,@STATE, @POSTALCODE, @CONTACT, @PHONE, @SALESREPCODE,@PRICELEVEL, @TERMSCODE, @DISCPERCENT, @TAXCODE,@USERCOMMENT, @CURRENCY, @EMAILADDRESS, @CUSTOMERGROUP,@CUSTINDICATOR, @DTLOADED)SET @ERRORCNT = @ERRORCNT + 1END --error--FETCH NEXT FROM CERNO_US INTO@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY, @STATE,@POSTALCODE, @CONTACT,@PHONE,@SALESREPCODE, @PRICELEVEL,@TERMSCODE,@DISCPERCENT, @TAXCODE, @USERCOMMENT, @CURRENCY,@EMAILADDRESS,@CUSTOMERGROUP, @CUSTINDICATOR, @DTLOADED--IF @ERRORCNT > 0INSERT INTO PROCEDURE_RESULTS(PROCEDURE_NAME, TABLE_NAME, ROW_COUNT,STATUS)VALUES('LOAD_ACCOUNTS', 'LOAD_ERNO_US_ACCT', @ERRORCNT, 'FAILEDINSERT/UPDATE')END -- cursorCLOSE CERNO_USDEALLOCATE CERNO_US
View 1 Replies
View Related
Apr 16, 2007
I am running a stored procedure as a job step and in the stored procedure I use return to pass one of several possible values when there is an error in processing (not an system error) so that the job step will fail. However, even when I return a non-zero value using return the job step completes as successful. What should I be doing so that the job step picks up the non-zero value and then indicates the step failed?
View 3 Replies
View Related
Mar 24, 2008
I have a stored procedure in SQL 2005 that purges data, and may take a few minutes to run. I'd like to report back to the client with status messages as the sp executes, using PRINT statements or something similar. I imagine something similar to BACKUP DATABASE, where it reports on percentage complete as the backup is executing.
I can't seem to find any information on how to do this. All posts on this subject state that it's not possible; that PRINT data is returned after the procedure executes. However it would seem possible since BACKUP DATABASE, for example, does this.
Is there any way to send status type messages to the client as the sp is executing??
Thanks.
View 6 Replies
View Related
Nov 6, 2006
Hi,
I need to write a select query that will run all returned results through a separate stored procedure before returning them to me.
Something like....
SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID()
......and run all the selected userids through a stored procedure like.....
CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate())
Can anyone help me to get these working togethsr in the same qurey?
Thanks
View 7 Replies
View Related
Apr 6, 2015
I've created this stored procedure to run two DTS packages which pull in data from two Excel files. I'd like to supress the Results tab since the results from the DTS packages are fed to it. I'd like to keep the Messages tab visible.
CREATE PROCEDURE [dbo].[ImportHelpDeskTickets]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON
[Code] ....
For those of you like me who will spend 8 hours trying to figure out how to get this working... Double up on the quotes as shown above. Also, be certain that NT SERVICEMSSQLSERVER has been granted appropriate rights to the folders with the the saved packages and the Excel files. You may also need to download the Access Database Engine.
Keywords: run dts package from stored procedure xp_cmdshell
'C:Program' is not recognized as an internal or external command, operable program or batch file.'
View 3 Replies
View Related
Nov 2, 2015
We try to run a stored procedure in management studio - and we see the following error -
"
Executed as user: "Some User". Unspecified error occurred on SQL Server. Connection may have been terminated by the server.
[SQLSTATE HY000] (Error 0) The log for database 'Some-database' is not available.
Check the event log for related error messages.
Resolve any errors and restart the database.
[SQLSTATE HY000] (Error 9001) During undoing of a logged operation in database 'Some-Database', an error occurred at log record ID (2343114:16096:197).
Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.
[SQLSTATE HY000] (Error 3314) During undoing of a logged operation in database 'Some-Database', an error occurred at log record ID (2342777:81708:1).
Typically, the specific failure is logged previously as an error in the Windows Event Log service.
Restore the database or file from a backup, or repair the database. [SQLSTATE HY000] (Error 3314). The step failed.
View 2 Replies
View Related
Apr 2, 2008
Hi,
I'm running several SSIS-packages in stored procedure using dtexec. Actually, there is a software that is running the procedure, but that's not important here.
The problem: if some of the packages failes, the whole procedure does not fail and I don't know if all the packages are successfully completed.
Here is a sample list of ssis-packages from procedure:
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataaaa.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedatabb.dtsx" '
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataccc.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataddd.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataeee.dtsx"'
So, if eg bbb.dtsx would fail, is it possible to get the whole procedure failing?
View 5 Replies
View Related
May 5, 2015
how to catch batch id from a running stored procedure. My intention is that when we run store procedures in batch we are running a lot of procedures and I would like to log each run and if the same procedure is running several times per day I need to separate the runs by a "batch id" for the specific run. I have created a logtable and a logprocedure that logs the start and end of a procedure run and also some values for the run. So I'm trying to find a way of fetching the "batch id" that the sp is running so I can separate the runs when analyzing the logtable. I have looked at metadata tables and also in the table sys.sysprocesses but I cannot find BATCH ID.
View 11 Replies
View Related
May 9, 2008
I have a custom built users table for storing some values and I am also utilizing the aspnet_Users table. I want to delete a user from my users tables then execute the aspnet_Users_DeleteUser sproc and pass into the stored procedure the username of the user to delete because the DeleteUser method requires this. When I execute the command from within my asp.net web application I get the exception below. Both values are being obtained from the asp.net application and are represented in my DAL that is also below. Any thoughts as to why I am receiving this exception? Thanks.
Procedure or function 'aspnet_Users_DeleteUser' expects parameter '@UserName', which was not supplied.
public static bool DeleteUser(int userID, string username)
{int result = 0;using (SqlConnection myConnection = new SqlConnection(AppConfiguration.ConnectionString))
{
SqlCommand myCommand = new SqlCommand("Users_DeleteUser", myConnection);myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.AddWithValue("@UserID", userID);myCommand.Parameters.AddWithValue("@UserName", username);
try
{
myConnection.Open();
result = myCommand.ExecuteNonQuery();
myConnection.Close();
}catch (Exception ex)
{throw new Exception("There was a problem attempting to connect to the database to delete the record. {0}", ex);
}
}return result > 0;
}
View 3 Replies
View Related
Nov 8, 2015
I have a vendor database that has a stored procedure that runs a long time.Eventually, the database runs out of log space.
Setting the database to FULL and doing frequent log backups does not work.
The log does not get truncated during this log backups.
The stored procedure in question has SET XACT_ABORT ON statement at the beginning.
View 4 Replies
View Related
