Hi there i have a sql server 7 database that i copied across to another server this time running windows 2003 and sql server 8. I have a routine that runs every night on each machine. on the old machine it take about 2 hours to do. on this new machine it is taking up to 5.5 hours to do the exact same job. the results are the same but the time delay could become an issue later on so i would like to nip it in the bud now.
Does anyone ahe any suggestions as to why the code would run so much slower on a newer and better spec machine.
I have copied everything across so there is no difference in tables or stored procedures. is there an optimisation tool i can run ??
I have the below query which returns thousands of records. can I optimize the returned result set faster without changing the structure of the database? SELECT dbo.tblComponent.ComponentID, dbo.tblComponent.ComponentName, dbo.tblErrorLog.ShortErrorMessage, dbo.tblErrorLog.LongErrorMessage, dbo.tblErrorLog.LogDate, dbo.tblErrorLevel.Description,dbo.tblErrorLog.ErrorLogIDFROM dbo.tblErrorLevel INNER JOIN dbo.tblErrorLog ON dbo.tblErrorLevel.ErrorLevelID = dbo.tblErrorLog.ErrorLevelID INNER JOIN dbo.tblComponent ON dbo.tblErrorLog.ComponentID = dbo.tblComponent.ComponentID Thanks.
2 weeks ago I deleted about 200GB of data from a 300GB+ database. It's a custom DB we want to use to test few things. We wanted a smaller size DB for our testing and since we didn't have any we grabbed a production backup, removed sensitive data and ran a large archiving script on it... Anyway so far so good but our data file was still the same size as before.
So we started a shrinkdatabase... it has been running for 2 weeks now! After about 1 week I interrupted the shrinkdatabase process and ran a dbcc shrinkdatabase('DB', truncateonly) just to see if the data file will get reduced a bit or not. It did get reduced by about 20GB. I assume that dbcc shrinkdatabase('DB', 0) has free up enough pages at the end of the data file so a truncateonly was able to free up some space... Anyway after this we started the dbcc shrinkdatabase('DB', truncateonly) again... still running...
The database was never shrank before and every index is highly fragmented... Is that why it's taking so long? Am I actually going to have to wait for another few weeks before that thing finishes??
Anyone has experience running shrink on large DBs?
I have following common table expression query which is taking like 15 hours to run. would someone suggest what can I do to speed this thing up..
; with a as (select proj_id, proj_start_dt,proj_end_dt, case when charindex('.', Proj_ID) > 0 then left(Proj_ID, len(Proj_ID) - charindex('.', reverse(Proj_ID))) end as Parent_Proj_ID from ods32.dbo.Proj a), --add Parent_Proj_ID column b as (select proj_id, proj_start_dt,proj_end_dt,Parent_Proj_ID from a where PROJ_START_DT is not null and PROJ_END_DT is not null --get all valid rows union all select a.Proj_Id, b.PROJ_START_DT, b.PROJ_END_DT, a.Parent_Proj_ID from b inner join a on b.Proj_Id = a.Parent_Proj_ID where a.PROJ_START_DT is null or a.PROJ_END_DT is null) --get all invalid children of valid rows and give them the dates of their parents update a set PROJ_START_DT = b.PROJ_START_DT, PROJ_END_DT = b.PROJ_END_DT from WPData a left outer join b on a.Proj_ID = b.Proj_ID -- join up and update
I am using RS 2005 and SQL Server 2005. I am having a table with about 6 million rows. I am extracting about 2 milliion rows for a report. When i run the report as a single user the report comes up in 6-7 minutes but when i run the report with 2 users the report takes forever to come up.
The statistics are different each time sometimes 19 minutes sometimes 30 minutes. The report connects to the db with the same dbuser id for both the people running the report. The stored procedure being invoked uses temp tables and also indexes are created on the fly for these temp tables.
The moment 2 people are running the report and when i run an SP_WHO2 i see that one process id that is being started by reportserver blocks another process being run by reportserver.
Timeouts are not happening the report justs goes on forever to come up. Any help? Also if you need any more information please do let me know I will be glad to give them.
The report is a matrix report and there are 4 levels of grouping on the report.
I have a simple update/initialization query (set integer column = 0 on all rows) that's been running for over 28 hours. There are just over 27 million rows in the table. In current activity it shows that the transaction is open but it's sleeping, and in locks it shows 1 DB S mode lock, 766 page X mode locks, 1 page U mode lock, and one table X mode lock. Server is 7.0 with 1.7 gig ram. Anyone have any ideas as to why it's taking so long? Table is about 7 gig in size; can't get to it in Enterprise Manager without locking it up...
I have 2 reports that report on baiscally the same thing, just group differently.
Report 1 groups summary phone call stats by Department, Day, and Hour - which are all drop down options. This means that the department summary stats are shown when the reports are rendered and can be expanded to see daily stats ... the daily stats can then be expanded to see the hourly stats.
Kinda Like: ------------------------- -Department 1 -10/1/2007 12:00 AM 1:00 AM +10/2/2007
+Department 2 -------------------------
Report 2 shows the same summary stats by department and extension - which is also a drop down option. This means that the department summary stats are shown when the reports are rendered and can be expanded to see summary stats for each extension.
The queries for these reports run from the Management Studio in about 10 seconds each with the Report 1 query returning about 800 rows for the month of October 2007 and the Report 2 query returning about 30 rows for the same date range.
When the reports are rendered, Report 1 (with 800 rows) is rendered in about 20 seconds, while Report 2 (with only 30 rows) takes about 5 minutes to render.
The reports themselves are very similar, with the only difference being the grouping. It is weird that the report that returns the samller Dataset is actually taking longer to render.
One thing I did try was running the queries from the Data tab of the .rdl files (in visual studio) and the query for Report 2 took about 4 minutes to return data, while (as I mentioned above) it ran in about 10 seconds in Management Studio.
select t.name as TriggerName, ta.name as TableName, o.parent_obj into GLPDemo.dbo.Temp_TablesAndTriggers from sysobjects o inner join sys.triggers t on t.object_id = o.id inner join syscomments c on c.id = t.object_id inner join sys.tables ta on ta.object_id = o.parent_obj where xtype = 'tr' and c.text like '%Audit%'
DECLARE @DBTrigger as varchar(100), @DBTable as varchar(100), @exestr as varchar(100)
DECLARE TCursor CURSOR for
SELECT TriggerName, TableName from Temp_TablesAndTriggers
I used a stored procedure in my report. If I run the sp in Management Studio (on my pc, database is on a sql server) it takes only several minutes; but from reporting services (also on pc) I put it in the data tab and execute it, it takes forever, actually never finish. I want to know why it's taking so long to execute it from reporting services while it returns data instantly from Mgt Studio. There is cursor in the sp. I don't know whether this is the culprit. Anyone knows why? Thanks!
Below is the sp. --------------------------------------------------------------------
I have a stored procedure that is taking too long to complete. I'ved narrowed the problem down to the following code. Is there any reason why this should take long to complete for about 40,000 records?
UPDATE Entries
SET EntryStatus = 1, reason = 'code entered more than once'
WHERE TimeSubmitted > @StartOfPeriod AND TimeSubmitted < @EndOfPeriod
AND TimeSubmitted <> @t and ShortCode = @ShortCode
I have one stored procedure and its taking 10 mins to execute. My stored procedure has 7 input parameters and one temp table( I am getting the data into temp table by using the input parameters) and also I used SET NOCOUNT ON. But if copy the whole code of the SP and execute that as regular sql statement in my query analyzer I am getting the result in 4 seconds. I am really puzzled with this.
What could be the reason why the SP is taking more than query,Unfortunately I can't post the code here.
I have a CLR stored proceudure than runs under 2 or 3 mins when run in management studio. But when the report calls the same SP, it runs in around 30 mins and the CPU usage goes to 90 or 100% and the sqlserver service uses massive amount of memory. Previously the report worked fine, only after made a few data driven subscriptions and redeployed the reports with minor changes that it began to happen. Please help--Iam stumped.
There are no infinite loops in the report. I checked.
I have a stored proc that is taking way too long to process, over 50 minutes.
What I need to do is go through 180K rows, and if the projId and langid is the same, increment 1 to a value, if not, reset the incrementer
I am doing the following at the moment
DECLARE @Id int, @ProjectId int, @LangCode char(6) DECLARE @CurProjectId int, @CurLangCode char(6) DECLARE @incrementer int DECLARE Order_cursor CURSOR FOR
SELECT Id, langCode, projectid FROM #tempTable
OPEN Order_cursor SET @incrementer = 1 FETCH NEXT FROM Order_cursor INTO @Id, @LangCode, @ProjectId WHILE @@FETCH_STATUS = 0 BEGIN IF(@CurProjectId = @ProjectId) AND (@CurLangCode = @LangCode) BEGIN SET @incrementer = @incrementer + 1 END ELSE BEGIN SET @incrementer = 1 END UPDATE #tempTable SET edbOrder = @incrementer WHERE Id = @id SET @CurProjectId = @ProjectId SET @CurLangCode = @LangCode FETCH NEXT FROM Order_cursor INTO @Id, @LangCode, @ProjectId END CLOSE Order_cursor DEALLOCATE Order_cursor
I have a stored procedure that normally takes about 5 hours to complete: DELETE tblX WHERE PROC_DT < dateadd(day, -93 , getdate())
tblX has about 55 million records and has an index on PROC_DT.
I have this running as a scheduled task. Over the weekend, the task executed and it is still running 56+ hours later. Does anybody have any ideas as to where I should look for the problem? I am afraid to kill the process because of the rollback time.
I have an issue where I am passing variables from my asp page to the stored procedures. In some cases the variable is a value (string) but in some I need it to the wildcard (where columnname=columnname). Everything fires off great when variables are fed in (obviously) but the default is the columnname, the stored procedure is taking it as a literal string. I really don't want to have to use execute select statements in my script but it is looking like it at this point. Does anyone know anyway I can circumvent this? I know I could use If clauses but this is for an app that has multiple dropdowns and each dropdown is dependant on the other so the if statments will grow to be about 12 deep which is inefficient.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran
return GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
