I have a stored procedure that is taking too long to complete. I'ved narrowed the problem down to the following code. Is there any reason why this should take long to complete for about 40,000 records?
UPDATE Entries
SET EntryStatus = 1, reason = 'code entered more than once'
WHERE TimeSubmitted > @StartOfPeriod AND TimeSubmitted < @EndOfPeriod
AND TimeSubmitted <> @t and ShortCode = @ShortCode
AND verbatim = @v
Dear All
I have a stored proc that is taking way too long to process, over 50 minutes.
What I need to do is go through 180K rows, and if the projId and langid is the same, increment 1 to a value, if not, reset the incrementer
I am doing the following at the moment
DECLARE @Id int, @ProjectId int, @LangCode char(6)
DECLARE @CurProjectId int, @CurLangCode char(6)
DECLARE @incrementer int
DECLARE Order_cursor CURSOR FOR
SELECT Id, langCode, projectid FROM #tempTable
OPEN Order_cursor
SET @incrementer = 1
FETCH NEXT FROM Order_cursor INTO @Id, @LangCode, @ProjectId
WHILE @@FETCH_STATUS = 0
BEGIN
IF(@CurProjectId = @ProjectId)
AND (@CurLangCode = @LangCode)
BEGIN
SET @incrementer = @incrementer + 1
END
ELSE
BEGIN
SET @incrementer = 1
END
UPDATE #tempTable
SET edbOrder = @incrementer
WHERE Id = @id
SET @CurProjectId = @ProjectId
SET @CurLangCode = @LangCode
FETCH NEXT FROM Order_cursor INTO @Id, @LangCode, @ProjectId
END
CLOSE Order_cursor
DEALLOCATE Order_cursor
Is there a better way?
Thanks
Johann
I have a stored procedure that normally takes about 5 hours to complete:
DELETE tblX WHERE PROC_DT < dateadd(day, -93 , getdate())
tblX has about 55 million records and has an index on PROC_DT.
I have this running as a scheduled task. Over the weekend, the task executed and it is still running 56+ hours later. Does anybody have any ideas as to where I should look for the problem? I am afraid to kill the process because of the rollback time.
Hi there i have a sql server 7 database that i copied across to another server this time running windows 2003 and sql server 8. I have a routine that runs every night on each machine. on the old machine it take about 2 hours to do. on this new machine it is taking up to 5.5 hours to do the exact same job. the results are the same but the time delay could become an issue later on so i would like to nip it in the bud now.
Does anyone ahe any suggestions as to why the code would run so much slower on a newer and better spec machine.
I have copied everything across so there is no difference in tables or stored procedures. is there an optimisation tool i can run ??
has anyone got any ideas ?
Hi
I have one stored procedure and its taking 10 mins to execute. My stored procedure has 7 input parameters and one temp table( I am getting the data into temp table by using the input parameters) and also I used SET NOCOUNT ON. But if copy the whole code of the SP and execute that as regular sql statement in my query analyzer I am getting the result in 4 seconds. I am really puzzled with this.
What could be the reason why the SP is taking more than query,Unfortunately I can't post the code here.
Thanks.
Hello.
I have a query that takes 1,5second to execute, but only 150ms of CPU. The query is quite simple, just one where statement against a clustered index.
SQL Server Execution Times:
CPU time = 156 ms, elapsed time = 1595 ms.
SELECT column1, column3, column4, ..., column10 FROM table WHERE column2 IN (37, 41, 43, 45, 49, 53, 55) ORDER BY column3 DESC
|--Sort(TOP 1000, ORDER BY:([u].[LastActivityDate] DESC))
|--Clustered Index Seek(OBJECT:([MP].[dbo].[__searchtest].[cix___searchtest_] AS [u]), SEEK:([u].[searchparamid]=37 OR [u].[searchparamid]=41 OR [u].[searchparamid]=43 OR [u].[searchparamid]=45 OR [u].[searchparamid]=49 OR [u].[searchparamid]=53 OR [u].[searchparamid]=55 OR [u].[searchparamid]=59) ORDERED FORWARD)
I have tried to rewrite the query to an INNER JOIN instead.
|--Sort(TOP 1000, ORDER BY:([u].[LastActivityDate] DESC))
|--Nested Loops(Inner Join, OUTER REFERENCES:([spal].[number]))
|--Index Seek(OBJECT:([MP].[dbo].[__search_parameters_lookup].[IX___search_parameters_lookup] AS [spal]), SEEK:([spal].[hash]=-1726604993) ORDERED FORWARD)
|--Clustered Index Seek(OBJECT:([MP].[dbo].[__searchtest].[cix___searchtest_] AS [u]), SEEK:([u].[searchparamid]=[spal].[number]) ORDERED FORWARD)
but the query still takes 1,5 seconds.
It spends 59% (according to execution plan) of sorting. 14% for the index seek of the __search_parameters_lookup table and then 24% of a clustered index seek of the __searchtest table.
How come it only uses that small of CPU but it still takes 1,5 seconds? It seems to be reading from memory as well so it shouldnt be an IO-problem?
The index I have on the table is a clustered index on (column 2).
Any ideas of how I can improve this? I have tried with DTA, also with a non clustered index on column3.
If I remove some columns from the SELECT-list the query will execute alot faster:
SQL Server Execution Times:
CPU time = 32 ms, elapsed time = 32 ms.
Booth the CPU and the elapsed time goes down and now appears to be more normal.
So there seems to be a problem caused by data transfer.
I tried to do a remake and normalize the table and when I do that I get the query execute with a speed of 400ms CPU and 400ms total. And this is still the exact same result, so why does it only spend 400ms of "rendering" or fetching the data when the tables are normalized but 1500ms when its denormalized?
Any ideas?
I am running Microsoft SQL Server 2000 - 8.00.2039
Hello.
I have a query that takes 1,5second to execute, but only 150ms of CPU. The query is quite simple, just one where statement against a clustered index.
SQL Server Execution Times:
CPU time = 156 ms, elapsed time = 1595 ms.
Code Snippet
SELECT column1, column3, column4, ..., column10 FROM table WHERE column2 IN (37, 41, 43, 45, 49, 53, 55) ORDER BY column3 DESC
Code Snippet
|--Sort(TOP 1000, ORDER BY:([u].[LastActivityDate] DESC))
|--Clustered Index Seek(OBJECT:([MP].[dbo].[__searchtest].[cix___searchtest_] AS [u]), SEEK:([u].[searchparamid]=37 OR [u].[searchparamid]=41 OR [u].[searchparamid]=43 OR [u].[searchparamid]=45 OR [u].[searchparamid]=49 OR [u].[searchparamid]=53 OR [u].[searchparamid]=55 OR [u].[searchparamid]=59) ORDERED FORWARD)
I have tried to rewrite the query to an INNER JOIN instead.
Code Snippet
|--Sort(TOP 1000, ORDER BY:([u].[LastActivityDate] DESC))
|--Nested Loops(Inner Join, OUTER REFERENCES:([spal].[number]))
|--Index Seek(OBJECT:([MP].[dbo].[__search_parameters_lookup].[IX___search_parameters_lookup] AS [spal]), SEEK:([spal].[hash]=-1726604993) ORDERED FORWARD)
|--Clustered Index Seek(OBJECT:([MP].[dbo].[__searchtest].[cix___searchtest_] AS [u]), SEEK:([u].[searchparamid]=[spal].[number]) ORDERED FORWARD)
but the query still takes 1,5 seconds.
It spends 59% (according to execution plan) of sorting. 14% for the index seek of the __search_parameters_lookup table and then 24% of a clustered index seek of the __searchtest table.
How come it only uses that small of CPU but it still takes 1,5 seconds? It seems to be reading from memory as well so it shouldnt be an IO-problem?
The index I have on the table is a clustered index on (column 2).
Any ideas of how I can improve this? I have tried with DTA, also with a non clustered index on column3.
If I remove some columns from the SELECT-list the query will execute alot faster:
SQL Server Execution Times:
CPU time = 32 ms, elapsed time = 32 ms.
Booth the CPU and the elapsed time goes down and now appears to be more normal.
So there seems to be a problem caused by data transfer.
I tried to do a remake and normalize the table and when I do that I get the query execute with a speed of 400ms CPU and 400ms total. And this is still the exact same result, so why does it only spend 400ms of "rendering" or fetching the data when the tables are normalized but 1500ms when its denormalized?
Any ideas?
I am running Microsoft SQL Server 2000 - 8.00.2039
I have a CLR stored proceudure than runs under 2 or 3 mins when run in management studio. But when the report calls the same SP, it runs in around 30 mins and the CPU usage goes to 90 or 100% and the sqlserver service uses massive amount of memory. Previously the report worked fine, only after made a few data driven subscriptions and redeployed the reports with minor changes that it began to happen.
Please help--Iam stumped.
There are no infinite loops in the report. I checked.
im rstoring a db the file is 7gig. Its taking more than 10 minuts..
how do i know if the backup file is ok to restore it
=============================
http://www.sqlserverstudy.com
Hi:
I have issued the following ALTER TABLE CHECK ADD CONSTRAINT on a table which has around 100K rows and it is taking long time (it's been more than 30 mins the alter table is running) to add the constraint. Is this normal or should I kill the process.
ALTER TABLE [dbo].[tblAbsHeqAnalyticOutputSimulationPathValues]
WITH CHECK ADD CONSTRAINT [CK_tblAbsHeqAnalyticOutputSimulationPathValues_1]
CHECK ([dbo].[svfConstraintVerifyTableUniqueActiveEntryFacade]('tblAbsHeqAnalyticOutputSimulationPathValues')<=(1) AND [dbo].[svfConstraintVerifyTableUniqueActiveEntryFacade]('tblAbsHeqAnalyticOutputSimulationPathValues')>=(0))
Thanks !
Hi All
I am having a serious problem which I need some help with regarding our SQL Server backup.
Basically it has started to take ages (as in 48hrs +), when it should only take about 4 hrs. The database is only 380GB and up until monday our backups have not been completing. When I check the activity monitor I have seen that the 'BACKUP DATABASE' process is set to suspended with a huge wait time and the wait type is ASYNC_IO_COMPLETION.
I am not sure how to solve this, but I am going to have to!
So if anyone has any ideas please help me! If you need any othe info please let me know.
Thanks
Gopher
I have written a UDF into which I pass a table name, field name, value of the field, whether alpha characters are valid, whether numerics are valid, and a string of alphanumerics that are valid. I return back a string with all invalid characters removed. Unfortunately when I use this on names and addresses in an 12000 row table, it takes forever to run. Can anyone think of an easy way to do this which isn't so labour intensive. Please see code below.
NB CHAR(32) is space, CHAR(45) is -,CHAR(39) is '
CREATE FUNCTION dbo.UDF_RemoveInvalidCharacters
( @sTableName varchar(50),-- e.g. 'Contact'
@sFieldname varchar(50),-- e.g. 'Lastname'
@sFieldValue varchar(500),-- e.g. 'Jeremi@h O''Grady84'
@sAlphaValid char(1),-- e.g. 'Y'
@sNumericValid char(1),--e.g. 'N'
@sAlphanumericsValid varchar(500))--'CHAR(32):CHAR(45):CHAR(39)'
RETURNS varchar(500)
AS
BEGIN
DECLARE @sReturnValue varchar(500),
@nTableID int,
@nFieldLength int,
@nCurrentPos int,
@sTestChar char(1),
@sValid char(1),
@nAlphanumericPos int,
@sAlphanumericTest varchar(8),
@sTempTestChar varchar(8),
@sAlphasFound char(1),
@sNumericsFound char(1),
@sAlphanumericsFound char(1)
--Get ID of table that the field is on
SELECT @nTableID = [id]
FROM SYSOBJECTS
WHERE [name] = @sTableName
--Get the length of the field
SELECT @nFieldLength = sc.length
FROM SYSOBJECTS so, SYSCOLUMNS sc
WHERE so.id = @nTableID
AND sc.id = @nTableID
AND sc.name = @sFieldName
--Initialise values
SET @sReturnValue = ''
SET @nCurrentPos = 1
SET @sValid = 'N'
SET @sAlphasFound = 'N'
SET @sNumericsFound = 'N'
SET @sAlphanumericsFound = 'N'
--Test each character to ensure it is valid before adding it to the return string, a string consisting solely of alphanumeric characters would be wrong
WHILE @nFieldLength >= @nCurrentPos
BEGIN
SET @sTestChar = substring(@sFieldValue,@nCurrentPos,1)
IF @sAlphaValid = 'Y' --alphas are valid
BEGIN
IF UPPER(@sTestChar) in ('A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z')
BEGIN
SET @sValid = 'Y'
SET @sAlphasFound = 'Y'
END
END
IF @sNumericValid = 'Y' AND @sValid <> 'Y'--numerics are valid
BEGIN
IF @sTestChar in ('0','1','2','3','4','5','6','7','8','9')
BEGIN
SET @sValid = 'Y'
SET @sNumericsFound = 'Y'
END
END
SET @nAlphanumericPos = 1
WHILE LEN(@sAlphanumericsValid) > @nAlphanumericPos AND @sValid <> 'Y' --alphanumerics that are valid
BEGIN
IF CHARINDEX(':',SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,LEN(@sAlphanumericsValid))) > 0
BEGIN
SET @sAlphanumericTest = SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,CHARINDEX(':',SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,LEN(@sAlphanumericsValid)))-1)
END ELSE
BEGIN
SET @sAlphanumericTest = SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,(LEN(@sAlphanumericsValid)-@nAlphanumericPos)+1)
END
SET @sTempTestChar = 'CHAR(' + RTRIM(LTRIM(STR(ASCII(@sTestChar)))) + ')'
IF @sTempTestChar = @sAlphanumericTest AND (@sAlphasFound = 'Y' OR @sNumericsFound = 'Y') --alphanumerics are only valid once we have alpha or numerics
BEGIN
SET @sValid = 'Y'
SET @sAlphanumericsFound = 'Y'
END
SET @nAlphanumericPos = @nAlphanumericPos + LEN(@sAlphanumericTest) + 1
END
IF @sValid = 'Y'
BEGIN
SELECT @sReturnValue = @sReturnValue + @sTestChar
END
SET @nCurrentPos = @nCurrentPos + 1
SELECT @sValid = 'N'
END
IF @sAlphanumericsFound = 'Y' AND @sNumericsFound = 'N' AND @sAlphasFound = 'N' --alphanumerics on their own are not valid
BEGIN
SELECT @sReturnValue = ''
END
RETURN @sReturnValue --in the example I would get Jeremih O'Grady
Below is my query which is taking a long time to execute, DB is SQL Server 2005 through a web Application
I have downloaded the latest MS SQL 2005 driver 1.xxx and still the query takes long to execute
The Description field is a Full_text indexed catalog column
the p.vendornumber is a primary key same with c.ID
Any one have an idea why it is taking this long to run
The Execution Time is: 13640 ms Which I think is very long
SELECT Upper(p.Type) Type,p.Modelname,p.partno,Upper(p.description) description,
Upper(p.classification)classification,p.vendornumber,p.mfg,
p.price,c.CompanyName,c.City,c.State,p.thumbnail
FROM P_all p, Acts c
WHERE p.vendornumber = c.ID
AND CONTAINS(p.Description, '"helmet*"')
Order by p.VendorNumber
Thanks
To all,
Im migrating data but its taking too long to commit insertion, what sould i do?
merwinp
dear guys. i have this one problem, where the sql statements really took very long time to be processed. It took more than 1 minute, depending on the total data in the table. I guest this have to do with the 'count' statements. here is the code:
------------------------------------------------------------
$sql = "SELECT company,theID,abbs,A as Active,N as Nonactive,(A+N) as Total
FROM(
select distinct D.nama As company, C.domID As theID, D.abbrew As abbs,
count(distinct case when B.ids is NOT NULL THEN A.dauserid END) As A,
count(distinct case when B.ids is NULL THEN A.dauserid END) As N
FROM
tableuser A LEFT OUTER JOIN tabletranscript B on (A.dauserid=B.dauserid)
INNER JOIN thedommember C ON(C.entitybuktiID=1 AND C.mypriority=1 AND
C.entitybuktiID=A.dauserid)
INNER JOIN mydomain D ON (C.domID=".$getID.")
GROUP BY D.nama, C.domID, D.abbrew
ORDER BY company
)";
Hope any of you can simplify this statements into a query that doesnt take ages to be processed.
Thanks in advance....
Hi,
I have a table with 3 columns and 20 million records.
first 2 columns have VARCHAR(4) data type and third column is VARCHAR(5000).
I put 3rd column under FULLTEXT and implement a normal INDEX on 1st column.
Now when i try to search
SELECT
TOP 20
col1,
col3
FROM
tbl
WHERE
col1 = '1234'
AND
CONTAINS(col3,'"market*"')
I am facing following problems
1- It hang for like 1 minute and give 2 records, whereas if i remove col1='1234' from where clause it take less than 1 second.
2- Some time it show criteria is too complex, although i am only requesting a single word in col3.
I am noob in FULL-TEXT but i have done all research in books, microsoft forum and Google and not getting any information.
Please assist.
Hi:
I have a query which returns approximately 50000 records, I am using a linked server to connect to two databases and retrieve data. For some reason it is taking a liitle more than hour to execute the query, but on MS Sql Server query window it comes after few minutes but the query runs for a long time.
How can expediate my query execution process.
Environment details
Database: MS Sql Server 64bit 2005
MS Sql jar file: sqljdbc_1.2.jar
OS: Windows both server and client.
Connect String in java code:
jdbcqlserver://sample_server:1433;databaseName=sample_db;user=admin_user;password=admin_pwd
and use PreparedStatement and ResultSet.
Regards
Arup
I'm running a query (see below) on my development server and its taking around 45 seconds. It hosts 18 user databases ranging from 3 MB to 400 MB. The production server, which is very similar but with only 1 25 MB user database, runs the query in less than 1 second. Both servers have been running on VMWare for almost 1 year with no problems. However last week I applied SP 2 to the development server, and yesterday I applied Critical Update KB934458. The production server is still running SQL Server 2005 Standard SP 1. Other than that, both servers are identical and running Windows 2003 Server Standard SP 1. I'm not seeing this discrepancy with other queries running against user databases.
use MyDatabase
GO
select db_name(database_id) as 'Database', o.name as 'Table',
s.index_id, index_type_desc, alloc_unit_type_desc, index_level, i.name as 'Index Name',
avg_fragmentation_in_percent, fragment_count, avg_fragment_size_in_pages,
page_count, avg_page_space_used_in_percent, record_count,
ghost_record_count, min_record_size_in_bytes, avg_record_size_in_bytes, forwarded_record_count,
schema_id, create_date, modify_date from sys.dm_db_index_physical_stats (null, null, null, null, 'DETAILED') s
join sys.objects o on s.object_id = o.object_id
join sys.indexes i on i.object_id = s.object_id and i.index_id = s.index_id
where db_name(database_id) = 'MyDatabase'
order by avg_fragmentation_in_percent desc
--order by avg_fragment_size_in_pages desc
--order by page_count desc
--order by record_count desc
--order by avg_record_size_in_bytes desc
i have sql 2000 db of about 120 GB. its taking about 10 -12 hours to restore on the same disk as new database.
server configuration is good.
when i try to restore another db of about 10 GB size, its restoring in about 5 minutes.
Sometime is necessary to stop MSSQLSeverOLAPServieces to do a full backup in my OLAP Server disks. After backup had finished and I tried to star MSSQLSeverOLAPServieces but it takes almost 30 minutes to the services starts.
What can it be causing that?
Paulo
Hi,
I have a table with 48 million rows,when i executed following update query it is taking 10 HOURS in SQL SERVER 2000 with SP1.
Where as when i executed same query in SQL SERVER7.0 with same table then it is taking 13 MINUTES. Comming to Machine...SQL 2000 Server has more processors and greater memory than SQL 7.0 m/c.
It looks strange but this is true.Does any one faced such problem..is there any bug in SQL 2000?????
Here is Query::
update cus_pay_jan_dist set univ_regdate = b.dayid
from cus_pay_jan_dist a with (nolock), tm_dayids b with (nolock)
where a.univ_regdate = b.dayidnum and a.univ_regdate like '2001%'
Thanks
Ananth
Hi All,
Scenario:
There are two applications running on different server say ServerA and ServerB. Both applications are using same database server SQL Server 2005 say ServerB. Called the application as ApplicationA and ApplicationB with respect to Server names
It means for ServerA the database is remote and for ServerB, database is local.
Both the applications are Java application and using datasource to connect to the database. The driver used are SQL Server 2000 driver (which includes 3 jars). This can be a question that why 2000 driver is used for 2005. The reason is, application on ServerA is getting error while using SQL Server 2005 as Driver not proper.
Problem Area:
When ApplicationB (local to database) is doing some DB operations (which includes select and then batch insert), ApplicationA (remote) is trying to insert a record which is taking too long time (around 40 sec.). This is causing timed out in ApplicationA.
ApplicationA is inserting the data into the same table from where ApplicationB is selecting the data.
Any help????
Cheers
Nitin
I have an update statment in my SSIS that use to take 10 minutes in SQL 2000 dts and now its take 1 hour 15 minutes in SQL 2005.
this is my sql update statment -
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
It is using ole db connection. About 36,000 records that it is updating.
I have read ole db can be slow and to use staging table. Does that mean on all updates like this I have to use a staging table and then insert. I didn't use to have to do this in SQL 2000. Has it changed. Are there any other options?
any input greatly appreciated.
Hi all,
We have to support forced failover under certain scenarios. Whilst using 'ForceFailoverAndAllowDataLoss' work perfectly the database is not available for several minutes. The failover command returns very quickly, but the database enters a recovery/restore state and will not accept connections for up to 2 minutes.
Am I missing an additional step that would speed this up?
Many thanks,
Nick
Hello,
I'm trying to figure out why my transaction log backup is taking up to an hour to complete. I started off with a full recovery model with a Full database back up every Sunday, differential backups every Tuesday/Thursday and log backups every 5 minutes. I would have thought that the log file backups would execute much quicker because I'm backing them up more often.
Here is my backup statement, I'm hoping I've got a wrong option that you can point out to me:
BACKUP LOG [xxxx] TO [LogFilexxxxBackups] WITH NOINIT , NOUNLOAD , NAME = N'xxxx log backup', SKIP , STATS = 10, NOFORMAT
The process is as follow,
The destination table is truncated and indexes are dropped before loading and after data being inserted we re-create the indexes.
Before this, a view extracts data from more than 22 tables from a staging database and tries to insert this data in the destination table.
it used to take 12-15 mins, but since yesterday loading one particular table never completes. While loading, the database is set to Simple recovery. There are no blocking. It's part of a daily batch thats loads 6 GB of data everyday. But while loading on particular table it's just keep running for hours. I tried rebuilding the indexes and re-starting the SQL Server but of no use.
Any help is much appreciated as this production batch job.
Thanks in advance.
Good afternoon everyone, I have written a view that pulls customer demographic infomration as well as pulling data from multiple scalar-valued functions. I am using this view to pull and send data from one database to another in the same SQL server. The problem that I am having is that I am running this import as a scheduled job in windows. The job is taking almost 24 hours to complete this task. The total number of records that are being pulled is around 21,000+. I have tried removing the functions from the view and it only takes the view 20 seconds to pull the demographic information from the same 21,000+ records but when I add the function calls this is where the time to complete goes through the roof. Has anyone encountered this before if so what would you suggest doing? Any help would be appreciated. Here is the syntax for my view: SELECT TOP 100 PERCENT CUS_EMAIL AS Email, CUS_CUSTNUM AS MemberID, CUS_PREFIX AS Prefix, CUS_FNAME AS FirstName,
CUS_LNAME AS LastName, CUS_SUFFIX AS Suffix, CUS_TITLE AS Title, CUS_STATE AS State, CUS_COUNTRY AS Country, CUS_ZIP AS ZipCode,
CUS_SEX AS Gender, CAST(CUS_DEMCODEA AS nvarchar(20)) + ',' + CAST(CUS_DEMCODEB AS nvarchar(20))
+ ',' + CAST(CUS_DEMCODEC AS nvarchar(20)) + ',' + CAST(CUS_DEMCODED AS nvarchar(20)) AS DemoCodes,
dbo.GetSubScribedDateMLA(CUS_CUSTNUM, CUS_EMAIL) AS MLASubscribedDate, dbo.GetSubScribedDateMLP(CUS_CUSTNUM, CUS_EMAIL)
AS MLPSubscribedDate, dbo.GetSubScribedDateLDC(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubscribedDate, dbo.GetMLAExpiration(CUS_CUSTNUM,
CUS_EMAIL) AS MLASubExpireDate, dbo.GetMLPExpiration(CUS_CUSTNUM, CUS_EMAIL) AS MLPSubExpireDate,
dbo.GetLDCExpiration(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubExpireDate, dbo.IsProspect(CUS_CUSTNUM, CUS_EMAIL) AS AGMProspect,
dbo.IsCurrentCustomer(CUS_CUSTNUM, CUS_EMAIL) AS AGMCurrentCustomer, dbo.IsMLAMember(CUS_CUSTNUM, CUS_EMAIL) AS MLAMember,
dbo.IsMLPMember(CUS_CUSTNUM, CUS_EMAIL) AS MLPMember, dbo.IsLDCMember(CUS_CUSTNUM, CUS_EMAIL) AS LDCMember,
dbo.CalculateTotalRevenue(CUS_CUSTNUM, CUS_EMAIL) AS AGMTotalRevenue, dbo.GetPubCodes(CUS_CUSTNUM, CUS_EMAIL)
AS ProductsPurchased, dbo.GetEmailType(CUS_CUSTNUM, CUS_EMAIL, CUS_RENT_EMAIL) AS EmailType, CUS_COMPANY AS Company,
CUS_CITY AS City
FROM dbo.CUS
WHERE (CUS_EMAIL IS NOT NULL) AND (CUS_EMAIL <> '') AND (CUS_EMAIL_VALID = 'Y') AND (CUS_EMAIL LIKE '%@%.%') AND (CUS_RENT_EMAIL = 'Y' OR
CUS_RENT_EMAIL = 'R' OR
CUS_RENT_EMAIL = 'I') AND (CHARINDEX(' ', CUS_EMAIL) = 0) AND (CUS_EMAIL NOT LIKE '@%')
Thanks in advance Michael Reyeros
I have a backup mainentance plan that does a full backup daily at 03:00am and then 2 minute transaction log backups throughout the day to a raided hard drive (It is set to overwrite after 2 weeks), When i go into enterprise manager and select the database to restore it just seems to take too long to read the backup history in. Can this time be reduced as i need to be able to restore the database A.S.A.P but still need a point in time restore to within 2 minutes of going down??
Thanks
Hi All,I am facing problem in MS SQL Server 2000. It is behaving slow forselect statements. It is even slower than MS ACCESS. For example, if iuse"Select count(*) from tbl;". i get the results after long time ifthere is more than 100k rows. What might be the possible reasons forthis??ThanksHoque
View 1 Replies View RelatedI have SSIS Projects taking a long time to open with packages with a large number of data flows. Is there a way to turn off validation of metadata when a package opens? Turn off validation during execution on SSIS Service (after previously validated in dev)? Or be able to control when validation takes place in general?
In my one package (1 of 5) I have 43 data flows (with a single source to target mapping) in 4 sequence containers, and it takes approximately 2-3 seconds per source to target mapping and sequence container to validate which will translate to 1 ½ to 2 ½ minutes to open. When the project with all 100+ tables for the data warehouse goes through validation, I can make coffee in the time it takes to open the project. I have to delete *.suo file (or verify all packages are closed in the designer and save the project file), and when I open the project, I have to jump immediately to SSISÃ Work Offline to set it to not validate the metadata to be able to work in a timely fashion. DelayValidation=TRUE does not help much.
Running in debug mode, has an effect of causing packages that were not open and validated to go through validation though I am not running those packages. Validate once during design and run forever.
Even if I re-open a package that I just closed from designer and had gone through validation, it will go through the validation process again.
It would be great if there could be an on-demand option off the menu bar to allow one to control when validation can take place for a project, or a more granular validation option for a specific data flow or container.
Hi,
Why is taking so long to open/create/render the reports for the first time? Is there any configuration to change this? I don€™t think this behavior is related to Report Execution or cache! I think there is something else going on! Thanks.
Hi There,
We have developed a application in VB and connected to SQL Server 6.5, we have some stored procedures where it brings the data from SQL Server 6.5, this application is running since some months, when we run this application it usually take only one minute to generate the report but since couple of days it is taking 25 Minutes to generate the report, even when I run that stored procedure at backend in Query analyzer at Server it is taking 15-20 Minutes to give the result.
please can any one help in identifying the problem, What all the things I need to check to identify it.
Give me the solution.
Thanks in Advance,
Bye,
Madhuker.
I think I may need help with query optimization.
We have a customer table and an address table. Each customer can have 1 or more addresses in the address table.
The task is to synchronize customer information from 2 entirely separate systems. I have a stored procedure that reads a text file (exported from the 'master' system) and updates all the customer records in the second system (which is in the sql server db). The queries themselves work. The data is accurate. My issue is with how long it takes the stored procedure to run. With over 11,000 records in the text file, the stored procedure sometimes takes over 3 hours to run.
That seems excessive to me. (and probably to those of you snickering in the back)
As an overview: my stored procedure does the following.
1) creates a temp table
2) dumps the data from the text file into the temp table
3) updates the address table with data from the temp table (records already there)
4) inserts records into the address table from the temp table (records not already there)
5) updates the customer table with an address id
6) drops the temp table
Any help/suggestions is appreciated. If you need more info, let me know.