Well, I am venturing into new territory for me. I'm very illiterate when it comes to SQL Server and so I need assistance. I have the beginnings of my stored procedure, which is supposed to compare two dates/times and If they are not equal I need to kick off a DTS Package.
So, here's what I have so far (it returns two dates like I would expect):
CREATE PROCEDURE usrCompareDataDownload
AS
BEGIN
SELECT MAX(ASP_ZZ_CHNG_TMST) FROM tbl_MaterialWeeklyData;
SELECT MAX(ZZ_CHNG_TMST) FROM TV_ASP_DPUL_WKLY;
Can i compare date = null in stored procedure? Does this work? The syntax works but it never get into my if else statement? The weird thing here is it has been working and just this morning, it stopped. I don't know why? Could you please help? Thanks,
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateActiveStates1]
@PROVIDERID INT
AS
DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME
DECLARE @ACTIVE BIT
SET @ACTIVE = 0
SET @STARTDATE = (SELECT ProhibitionStartDate FROM Providers WHERE ProviderID=@PROVIDERID)
SET @ENDDATE = (SELECT ProhibitionEndDate FROM Providers WHERE ProviderID=@PROVIDERID)
IF ((@STARTDATE = NULL OR @STARTDATE = '1753-01-01') AND (@ENDDATE = NULL OR @ENDDATE = '1753-01-01'))
BEGIN
PRINT 'Setting Inactive due to NULL Start Date and NULL End Date'
SET @ACTIVE=0
END
ELSE IF (@STARTDATE != NULL AND @STARTDATE <= GETDATE())
BEGIN
IF (@ENDDATE = NULL)
BEGIN
PRINT 'Setting Active due to NON-NULL Start Date and NULL End Date'
SET @ACTIVE=1
END
ELSE IF (@ENDDATE >= GETDATE())
BEGIN
PRINT 'Setting Active due to NON-NULL Start Date and NON-EXPIRED End Date'
SET @ACTIVE=1
END
ELSE
BEGIN
PRINT 'Setting Inactive due to NON-NULL Start Date and EXPIRED End Date'
SET @ACTIVE=0
END
END
UPDATE Providers SET Active=@ACTIVE
WHERE ProviderID=@PROVIDERID
UPDATE Actions SET Active=@ACTIVE WHERE ProviderID=@PROVIDERID
A table in my database has a field of type smalldatetime called "PeriodEnd". I want to write a simple stored procedure that gets records based on the 'PeriodEnd' field. When I run a query such as
Select * from mytable where PeriodEnd='30/06/1989'
I get an errror saying "The conversion of char data type to a smalldatetime data type resulted in an out-of-range smalldatetime value"
Do I have to use CONVERT in some way to alter my input value?
I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.
So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?
Is there any way to compare two similar databases (A & B) stored procedure. I have to find stored procedure in second database B with respect to the difference.
I have a scenario where I need to compare a single DateTime field in a stored procedure against multiple values passed into the proc.So I was thinking I could pass in the DateTime values into the stored procedure with a User Defined Table type ... and then in the stored procedure I would need to run through that table of values and compare against the CreatedWhenUTC value.I could have the following queries for example:
WHERE CreatedWhenUTC <= dateValue1 OR CreatedWhenUTC <= dateValue2 OR CreatedWhenUTC <= dateValue 3
The <= is determined by another operator param passed in. So the query could also be:
WHERE CreatedWhenUTC > dateValue1 OR CreatedWhenUTC > dateValue2 OR CreateWhenUTC > dateValue3 OR CreateWhenUTC > dateValue4
I have a stored procedure where I am passing in two dates and looking for records between date one and date two. If I run the SQL statement in the query analyzer I get results back however if I try to pass the same to a stored procedure it returns nothing. Example: This returns a result when run in query analyzer
Select distinct Employeename from thisTable where someDate between '11/20/00' and '11/27/00'
Stored procedure is:
CREATE PROCEDURE sp_Employee_Report
@StartDate datetime, @EndDate datetime
AS Select distinct Employeename from thisTable where someDate between @StartDate and @EndDate
return nothing.
The someDate field is of date type datetime. Anyone know why this does not work in the stored procedure? Thanks for any help
- Since the parameters are optional user can enter either one or can leave both blank. - If user doesnot enter any values for SD (start date) and ED (end date), stored procedure should run select query replacing those values with wildcard character '%' or NULL - If user enters SD, query should use @StartDate as the SD and GetDate() as the ED - If user enters ED, query should use @EndDate as the ED and MIN() of the Date field as SD
I was able to write query which did almost everything as is stated above expect for incorporating NULLs The query is as below
AS IF ( @StartDate IS NULL) Select @StartDate = MIN(DateInputted) from Document
Select FName as 'First Name', LName as 'Last Name', ID as 'Student ID', Orphan as 'Orphan', DocumentType as 'Document Type', DocDesc as 'Description of the Document', DateInputted as 'Date Entered', InputtedBy as 'Entered by'
From Document,DocumentTypeCodes Where FName LIKE ISNULL(@FName,'%') AND LName LIKE ISNULL(@LName,'%' + NULL) AND ID LIKE ISNULL(@ID,'%' + NULL) AND (DateInputted BETWEEN @StartDate AND ISNULL(@EndDate,GETDATE()) OR DateInputted IS NULL) AND Document.DocTypeCode = DocumentTypeCodes.DocTypeCode
GO
Any help would be appreciated Thanks in advance :)
We've researched this, and some people are stating convert to nvarchar first. I'd like to keep the date as a date.Here is how I am trying to call it:
Declare @FromDate as date Declare @ToDate as date Set @FromDate=Convert(date,'09-01-2015',110) Set @ToDate= Convert(Date,'10-13-2015',110) Select @FromDate
[code]...
How can I keep the date as a date and still pass it to stored procedure.
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
I need to compare tow dates DateField1 and DateField2 and find number of hours between these two dates. Then I need to deduct non-business days and hours (Business days: Monday-Friday and Business Hours: 7:00am-7:00pm) from this and find net hours. How can I do this?
Hi,I need to compare Todays Date with a Date in the Table (DateExpired)to see if the membership expired. How do I do that? thanks SELECT DateExpired FROM Member
I am new to SQL and I have a problem to deal with dates. I have a field called LogDate (smalldatetime) and default value getdate(). The date is added immediately when a visitor visits a page of my site.
The problem is that I cannot retrieve the no of the visitors for today using getdate(). I use the following query but I am sure that something missing.
SELECT Count(*) As DailyVisitors FROM stats WHERE LogDate = CONVERT(varchar(10), GETDATE(), 103)
Hi, I wanted to display the createDate provided by the asp membership table. my where clause is this .. WHERE CreateDate = GetDate() I have create an account today but when i run my select statement with this where clause, the result doesnt show up. It seem like they compare the time as well. How can i make the GetDate to compare only the dates but not the time?
I need to compare several dates in a single record and determine the maximum value. Not sure how to do this in TSQL. Something like this (though I obviously can't use the MAX function because):
SELECT MAX(datefield1,datefield2,datefield3) as latestchange,jobnum FROM table1
Anyone have a function that will do this? Or is there one built in?
I need to write a query like get all the rows by comparing rmd with system todaydate and these must be with in startdate and enddate
id startdate enddate rmd 1 10-oct-15 16-oct-15 11-oct-15 2 11-oct-15 14-oct-15 11-oct-15 3 09-oct-15 11-oct-15 10-oct-15 4 07-oct-15 08-ot-15 07-oct-15 5 if sysdate(today) is 11-oct-15 then i need to get all the rows of 1, 2,3
This is probably a problem with a pretty simple solution but i can't find the right control/data flow item to handle it
Scenario.
I determine the database date for my source data for a set of ETL jobs via a piece of SQL - this gets passed to a master package variable which is subsequently to be used as the "Load date" of the resulting child package ETL routines. However I only want the packages to run if the LoadDate has either not been run before or is the next one in the DW sequence.
To check for this, In my data warehouse I also have a table called Import_Registry where the date of each upload is stored at the end of the daily ETL routines. So I can obtain the potential NextUpload date via this bit of SQL script.
SELECT DATEADD(day, 1, MAX(Upload_Date)) AS NextUpload FROM Import_Registry
Problem. I need to compare these two dates (the source db date & the DW next upload date) to see if they match. If they do match, then I run all the ETL packages using the date. If they do not match, say for example if the source database date is less than the "NextUpload" date I want to exit the routines "gracefully" and log the failure.
How do I get this working - can't seem to get my head around how I can compare the 2 dates ?
I need to pull dates from a DB2 database via TSQL (Linked server - IBM DB2 for i IBMDASQL OLE DB Provider) and compare it to today for a less than or greater than type comparison.
Database: DB2, Customer information housed here Columns: UTOFMM - Month (2 character, numeric) UTOFDD - Day (2 character, numeric) UTOFYY - Year (2 character, numeric. Problem: years from 2000 to 2009 are stored as 0, 1, 2, ... etc) UTOFCV - Century Value (2 char, numeric. 0 = before 2000, 1 = in or after 2000)
I need to concatenate the date to be "sql" friendly, and then compare to today's date. It's to find any customer with date values in the fields above, and then differentiate between dates before today and after today.Here is the snippet of what I'm trying to fix. This portion of a nightly job is just checking for <u>any</u> value in the UTOFMM column of the current record.
Add Customer ID Update [responder].[Temp_RX_CUSTOMERS] set CustomerID = lf.UTCSID from [responder].[Temp_RX_CUSTOMERS] LEFT Outer Join [HTEDTA].[THOR].[HTEDTA].UT210AP lf ON [responder].[Temp_RX_CUSTOMERS].LocationID = lf.UTLCID where lf.UTOFMM = 0 GO
What I need to be able to find is any records where the Discontinue_Date is greater than the Effective_Date on the next row for a given Customer ID and Part_ID. This is a customer pricing table so the Discontinue_Date of row 53 for example should never be greater than the Effective_Date of row 54130, these are the records I'm looking to find. So I'm looking for a SELECT query that would look for any records where this is true. Obviously the last Discontinue_Date row for a Customer_ID will not have a next row so I wouldn't want to return that.
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[PaymentsLog](
[Code] ....
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
The Process that goes on here is developers send the stored procedure i deloy them on development machine and upon request send them to QA / PROD
The problem here they send sp's quite often and i update them every time..now because of some mismatch they want to revert to the old version...back i don't know how to do it...and the possiblity is if i can compare the version they r having a the version in database that will help me a lot..
How do i campare the storedprocedure to check if both the one are similar or not.
And can any one guide me what's the basic process that normally any of u guys undergo so that u can revert back to the previous with basically saving the script file everytime..what r the standards and name conventions that need to be followed.
I know there r lots of issues i expressed ..thanks a lot for u help and suggestions...
I'm using SQL Server 7.0. I have a Production database and a Development database. I have stored procedures with the same name in both databases. Is there a utility that I can use to see if the version that is in the production database is the same as the one in development and, if not, what are the differences between the two?
Hi guys. I'm trying to compare the results from various stored procedures. Various stored procedures in our database got redone (refactored), and I want to see if they still pull back the same data.
Are there any programs out there that do this? Compare result sets from stored procedures? Any help is appreciated. Thanks!
