Stored Procedure Using Multiple Selects?
Feb 5, 2008
I need help in figuring out the proper way of writing a stored procedure out correctly to get my desired datasource. In my ocnIdToRatePlanOptions table, I will recieve a parameter via request.querystring @ocnId to filter out my result set for ocnIdToRatePlan table. Based on the ocnId filtered I want it to select the corresponding tables too.
So, if a querystring is passed that is 3955 in my ocnIdToRatePlanOptions table, I want it to use it to create a select for RatePlan1. If a querystring is passed that is 1854 in my ocnIdToRatePlanOptions table, I want it to use to create a select for RatePlan2.
Is this possible?
ocnIdToRatePlanOptions Table
[otrpoRefId] [int] IDENTITY(1,1) NOT NULL,
[FKocnId] [nvarchar](4) NOT NULL,
[FKrpoRefId] [int] NOT NULL,
1, 3955, 1
2, 1854, 2
RatePlan1 Table
[rp1RefId] [int] IDENTITY(1,1) NOT NULL,
[FKocnId] [nvarchar](4) NOT NULL
[fee] [decimal](18, 2) NOT NULL
1, 3955, 1.00
2, 2350, 2.00
RatePla2 Table
[rp2RefId] [int] IDENTITY(1,1) NOT NULL,
[FKocnId] [nvarchar](4) NOT NULL,
[q_0_50] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_0_50] DEFAULT ((225)),
[q_51_100] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_51_100] DEFAULT ((325)),
[q_101_150] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_101_150] DEFAULT ((345)),
[q_151_200] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_151_200] DEFAULT ((400)),
[q_201_250] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_201_250] DEFAULT ((450)),
[q_251_300] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_251_300] DEFAULT ((500)),
[q_301_400] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_300_400] DEFAULT ((650)),
[q_401_600] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_401_600] DEFAULT ((950)),
[q_601] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_601] DEFAULT ((1.50))
1,1854, 225.00, 325.00, 345.00, 400.00, 450.00, 500.00, 650.00, 950.00, 1.50
2,8140, 225.00, 325.00, 345.00, 400.00, 450.00, 500.00, 650.00, 950.00, 1.50
View 12 Replies
ADVERTISEMENT
Jan 17, 2008
Here's my stored procedure:
ALTER PROCEDURE sproc_InsertOrder
(
@CustID tinyint,
@Size varchar(50),
@Crust varchar(50),
@total smallmoney
)
AS
INSERT INTO tblOrders (CustID, SizeID, CrustID, Total)
VALUES(@CustID,
SELECT SizeID FROM tblSizes WHERE @Size = SizeName,
SELECT CrustID FROM tblCrusts WHERE @Crust = Crust,
@total)
SELECT SCOPE_IDENTITY()
RETURN
And my tables:
tblOrders
-------------------------------------------
OrderID | CustID | SizeID | CrustID | Total
-------------------------------------------
tblSizes
--------------------------
SizeID | SizeName | Price
--------------------------
tblCrusts
------------------------
CrustID | Crust | Price
------------------------
My stored procedure is giving me an error, it says "Unable to parse query text", and I'm certain the problem is with the SELECT statements. What am I doing wrong?
View 4 Replies
View Related
Dec 2, 2005
I can create 1 view of a database then use that views results to query
but i want do this with a stored procedure
pass some data to it, so it selects some data
query the results it created and output this data.
ie
pass 2 values to the procedure
(
@FirstValue int,
@secondValue int output
)
select from a database with the firstpassed value
Select *
From TableName
Where ID = @FirstValue
Then
using the results from the above select
Select *
From theResultsOfAbove
Where ID = @SecondValue
any ideas would be fabo !
View 6 Replies
View Related
Apr 29, 2008
Hallo, i need some help
I've done this script
SET NOCOUNT ON
DECLARE @login varchar(50)
DECLARE cur CURSOR FOR
select distinct user
from products with (nolock)
OPEN cur
FETCH NEXT FROM cur
INTO @login
WHILE @@FETCH_STATUS = 0
BEGIN
select last,first from users where login=@login;
FETCH NEXT FROM cur
INTO @login
END
CLOSE cur
DEALLOCATE cur
But the result is not what i originally wanted.
It's generates multiple select tables with only one row.
I need only one table with all the rows generated.
I tried this:
SET NOCOUNT ON
DECLARE @login varchar(50)
DECLARE cur CURSOR FOR
select distinct user
from products with (nolock)
OPEN cur
FETCH NEXT FROM cur
INTO @login
IF @@FETCH_STATUS = 0
BEGIN
select last,first from users where login=@login;
FETCH NEXT FROM cur
INTO @login
END
WHILE @@FETCH_STATUS = 0
BEGIN
union
select last,first from users where login=@login;
FETCH NEXT FROM cur
INTO @login
END
CLOSE cur
DEALLOCATE cur
But it ended in an error on the union command.
Can you help me?
Thanks and sorry for my bad english :)
Debiru
View 6 Replies
View Related
Apr 14, 2008
Hi All,
I have a table that looks like this:
Date | Event
01/01/2008 | CRG
01/01/2008 | MAG
01/01/2008 | CPY
01/02/2008 | CPY
01/02/2008 | MAG
01/02/2008 | MAG
01/03/2008 | CRG
01/03/2008 | CPY
I need to display the data like this:
Date | CRG | MAG | CPY | Total
01/01/2008 | 1 | 1 | 1 | 3
01/02/2008 | 0 | 2 | 2 | 4
01/03/2008 | 1 | 0 | 1 | 2
Thank you so much for your help.
View 3 Replies
View Related
Jun 1, 2007
Hello, i would like to take the following select statements and make one table out of them. However, i want each statement to be its own column. The Union adds all of the statements into one colummn. Ultimately, i would like to place these into a stored procedure. Any help would be apreciated. Here are the statements:
select count(chalf_upd) as CHalfFile from elpc where elpc.chalf_upd is not null
select count (halfupd) as HalfFile from elpc where elpc.halfupd is not null
select count (cstaff_upd) as CStaffFile from elpc where elpc.cstaff_upd is not null
select count (staffupd) as StaffFile from elpc where elpc.staffupd is not null
select count (coffice_up) as COfficeFile from elpc where elpc.coffice_up is not null
select count (officeupd) as OfficeFile from elpc where elpc.officeupd is not null
select count (signupd) as SignFile from elpc where elpc.signupd is not null
select count (informupd) as ISignFile from elpc where elpc.informupd is not null
select count(staff_color_lastupd) as InStaffFile from staff_graphics_lastupdate where staff_graphics_lastupdate.staff_color_lastupd is not null
Strange Game. The only winnng move is not to play.
View 6 Replies
View Related
Aug 22, 2013
I want to merge these queries in one query. When I use UNION ALL parameter sth_tarih sort is wrong.
SELECT TOP 5 sth_stok_kod,sth_evrakno_seri,sth_evrakno_sira,cha_kod ,sth_RECno,sth_tarih
FROM STOK_HAREKETLERI AS SH INNER JOIN CARI_HESAP_HAREKETLERI AS CHH ON SH.sth_evrakno_sira= CHH.cha_evrakno_sira WHERE sth_stok_kod = (
SELECT sth_stok_kod FROM STOK_HAREKETLERI WHERE sth_RECno = (SELECT MAX (sth_RECno) FROM STOK_HAREKETLERI) ) AND sth_evraktip = 3
ORDER BY sth_stok_kod ASC,sth_tarih DESC
[code]....
View 6 Replies
View Related
Dec 7, 2006
I have a parameter dropdown as USERID.
I want a functionality that the user can selct multiple userid's to show more than one record as output for comparison purpose.
How can i achieve this multiple select (i.e cntrl+click) within parameter dropdown.
Thanks,
Kiran.
View 7 Replies
View Related
Jul 20, 2005
I want to get a column count several times in one query using differentfilters but can't work out how to do it - can anyone point me in the rightdirection?For example, how would combine these two selects into one query that willlist the total and filtered actions:SELECT COUNT(actions) as actioncount, locationFROM mytableGROUP BY locationSELECT COUNT(actions) as actioncount, locationFROM mytableWHERE mycondition IS NULLGROUP BY location
View 6 Replies
View Related
Mar 1, 2007
Hello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
View 9 Replies
View Related
Jul 20, 2005
I am trying to run 3 dynamic selects from stored proc, really onlythe table name is dynamic.. Anway I'm kinda lost on how I canaccomplish this.. this is what I have but it only returns the firstresult.. that being basicCREATE PROCEDURE email_complexity@TableName VarChar(100)ASDeclare @SQL VarChar(1000)Declare @SQL1 VarChar(1000)Set nocount onSELECT @SQL = 'SELECT Count(complexity) AS basic FROM 'SELECT @SQL = @SQL + @TableNameSELECT @SQL = @SQL + ' WHERE len(complexity) = 5'Exec ( @SQL)SELECT @SQL1 = 'SELECT Count(complexity) AS moderate FROM 'SELECT @SQL1 = @SQL1 + @TableNameSELECT @SQL1 = @SQL1 + ' WHERE len(complexity) = 8'Exec ( @SQL1)ReturnIs there a better way of doing this??tiaDave
View 2 Replies
View Related
Jul 3, 2007
Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
Cheers,
Justin
View 2 Replies
View Related
Sep 14, 2006
Ok, this is kind of an odd problem. Back in June we were having problems with our call manager software, and they decided to have it just start usinga new database. Now I'm trying to generate some reports which need to cover both the old call stats and the new, so that means the stored procedure builds a temp table and populates it from both databases.This works perfectly fine in Management Studio, and when being called from Excel.However when I try to call it from an ASP.NET web app using SqlCommand.ExecuteReader(), I only get results from the new database!What on earth could cause that?
View 2 Replies
View Related
Feb 5, 2008
I have put together the stored-procedure below to carry out update, delete and insert queries in one visit. The code has been pieced together from the pages listed at the bottom. I pass the procedure three XML strings and after testing it a few times it seems to work fine. I’m fairly new to stored procedures though, so I was hoping someone would answer these questions:
1. Is this an acceptable way to do this? Can you foresee any problems?2. I want to make this an ‘all-or-nothing’ event, i.e. if any part of the procedure fails, it must all fail. How would I achieve that?3. I want to know in my calling code what the result is. I’ve used output parameters before, but I’m unsure how to combine one with 2 above.
Sorry this is a long script, but I’ve removed most of the column names and values to shorten it. Thanks in advance.CREATE PROCEDURE amendPageRecords
@PagesToUpdate xml,
@PagesToDelete xml,
@PagesToInsert xml
AS
BEGIN
-- UPDATING RECORDS ------------------------------------------------------------
DECLARE @UpdateTable TABLE (PageID int, PageType varchar(10))
INSERT INTO @UpdateTable (PageID, PageType)
SELECT PageID = UpdatePages.Item.value('@PageID', 'int'),
PageType = UpdatePages.Item.value('@PageType', 'varchar(10)')
FROM @PagesToUpdate.nodes('Pages/Page') AS UpdatePages(Item)
UPDATE page
SET page.page_type = UP.PageType
FROM page INNER JOIN @UpdateTable UP ON page.page_id = UP.PageID
-- DELETING RECORDS ------------------------------------------------------------
DECLARE @DeleteTable TABLE (PageID int)
INSERT INTO @DeleteTable (PageID)
SELECT PageID = DeletePages.Item.value('@PageID', 'int')
FROM @PagesToDelete.nodes('Pages/Page') AS DeletePages(Item)
DELETE FROM page
FROM page INNER JOIN @DeleteTable DP ON page.page_id = DP.PageID
-- INSERTING RECORDS -----------------------------------------------------------
DECLARE @InsertTable TABLE (SiteID int, PageType varchar(10))
INSERT INTO @InsertTable (SiteID, PageType)
SELECT SiteID = InsertPages.Item.value('@SiteID', 'int'),
PageType = InsertPages.Item.value('@PageType', 'varchar(10)')
FROM @PagesToInsert.nodes('Pages/Page') AS InsertPages(Item)
INSERT INTO page
SELECT SiteID, PageType
FROM @InsertTable
END
GOCode taken from:http://weblogs.asp.net/jgalloway/archive/2007/02/16/passing-lists-to-sql-server-2005-with-xml-parameters.aspxhttp://www.eggheadcafe.com/articles/20030627c.asphttp://www.sommarskog.se/arrays-in-sql-2005.html
View 10 Replies
View Related
Apr 18, 2001
I am trying to write a stored procedure that has an inner join between two tables from two different databases on the same sql server.
Something like...
Select * FROM
DB1-table1 INNER JOIN DB2-table1
ON DB1-table1.ID = DB2-table1.ID
yada yada yada.......
Does anyone know how to do this or is it possible? If so, what database should I put the stored procedure in or does it matter?
View 2 Replies
View Related
Aug 3, 1999
Hello.
I'm trying to write a generic Stored Procedure will select records with the following options.
1. Select XXX from theTable
Where ID = 1
2. Select XXX from theTable
Where ID = 1 or ID = 3 or ID = 4
The issues is that at run time the WHERE CLAUSE COULD CHANGE
(it could have multiple OR-d options)
Is there a way to pass a varChar argument like "Where ID=1 or ID =2"?
Thanks in advance!
-andy
View 2 Replies
View Related
Sep 6, 2006
Hi All,
I have a database with very heavy volume of data.
I need to write a stored procedure with 20 parameters as input and it searches in a table . Most of the parameters or NULL , how do I write this procedure without using any dynamic queries.
Ex : To find a customer I have a proc which can accept 20 parameters like CustName, City, State , Phone , Street etc.
Im passing only Custname as parameters and other 19 parameters are NULL.How do I write the WHERE clause ?
Thanks in advance,
HHA
View 4 Replies
View Related
Jan 10, 2004
Hi,
I'm trying to move an asp site from an Access DB to SQL Server.
The site features a search system which allows multiple keywords to be used in up to three fields.
The way I used to manage this was very similar to how it is described below (taken from http://www.planet-source-code.com/vb/scripts/ShowCode.asp?lngWId=4&txtCodeId=6701):
"So you're replacing all of the middle spaces with a SQL 'and' statement. In plain English, if your search phrase is "print bug", this now becomes "'%print%' AND field LIKE '%bug%'" when you concatenate the leading and trailing %'s and quotes (this is for Microsoft Access drivers, other drivers may use different wildcards)--so just append this phrase to the "WHERE field LIKE " phrase, and you're in business."
The trouble I'm having is that the search string is sitting in a Stored Procedure. How can I dynamically append to the search string in this case?
If it isn't possible, how can I go about this?
Cheers all.
__________________________________________________ ___
Code:
ASP:
item=request(item)
'****item = Replace(item, " ","%' AND item like '%")**** - needs attention
rs.Open "Exec getlist "& item &"" objConn, 3
SP:
CREATE PROCEDURE getlist
@item nvarchar(255)
SELECT item FROM publications WHERE item LIKE '%' + @item + '%'
GO
View 14 Replies
View Related
Apr 29, 2008
I believe we can you multiple statements in stored procedures?
Suppose I have a stored procedure and I pass parameters to this SP.
What I am aiming for is to pass some values to the stored procedure, use a select statement to retrieve some values, then have two update statements as below. Updating the same table but with opposite values, both passed as a parameter and retrived, as given below:
CREATE sp_temp_proc
@order_id int,
@order_position int,
@temp_order_id OUTPUT
@temp_order_position OUTPUT,
SELECT order_id AS temp_order_id
FROM <TABLE> WHERE order_position < @order_position
@temp_order_id = temp_order_id
UPDATE <TABLE> SET order_position = @order_position WHERE order_id =
@temp_order_id
UPDATE <TABLE> SET order_position = @temp_order_position WHERE order_id = @order_id
View 2 Replies
View Related
Oct 15, 2014
I want to use 3 transactions in a single stored procedure.First it should update the value and then if the 1st transaction executed successfully then 2nd transaction should start,if 2nd trans executed successfully then 3rd trans should execute.After that only i want to commit all the transactions that is 1,2,3.If any of the trans fails the other shouldn't execute.How do i do this?
USE [recruit]
GO
/****** Object: StoredProcedure [dbo].[Import] Script Date: 10/15/2014 17:13:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Proc [dbo].[Import]
@CustId int
[code].....
View 2 Replies
View Related
Oct 22, 2007
how can we use 2 databases in 1 stored procedure.
like for example i want to get records from 1 table and insert it to other tables in another database.
thnx for the help.
View 1 Replies
View Related
Feb 24, 2008
Hello all,
I'm working on a project for fun with some friends and have run into an issue with stored procedures. I've dealt with SQL quite a bit at my current job, but always from the perspective of somebody querying the database. The database was always managed by someone else and I never had to worry about the underlying code. Now, with my own project at home, I'm trying to deal with a situation and would like to use one, but I'm not sure if it is the best option and if so, exactly how to go about it.
Imagine a site that tracks movies. I have 3 tables:
Movies ( MovieID, Title, DirectorID, ActorID )
Actors ( ActorID, Name )
Director (DirectorID, Name)
This is an overly simple example, but it gets to the heart of my problem.
Okay, now what I'm wanting to do is to be able to write a procedure that would let me create my entries from just one call -- for instance
create_movie( 'Super Movie', 'directorJoe', 'actorJohn' )
that would do the following things:
-Look and see if the given director and actor already exist (from previous films)
-If they do, grab their ID values and use those in the new movie entry
-If they do not, create new entries and get THOSE ID values to use in the new movie entry
Can this be done in a stored procedure (I'm pretty sure it can be) and what sort of commands should I look into -- I'm not looking for a complete solution, cause I want to learn, but I am having trouble finding examples that fit my scenario.
Thanks.
View 3 Replies
View Related
Jul 23, 2005
Hi!I got 2 stored procedure, proc1 executes proc2,proc2 does some updates and inserts on different tables ...proc1:ALTER PROCEDUREASexecute proc2SELECT * FROM tblFoo______________________my problem is, that when executing proc1, I receive the message:"THE SP executed successfully, but did not return records!"But I need the resultset from "SELECT * FROM tblFoo" that is executedat the end of proc1.I'm not sure, but I think that I solved a similira problem with "setnocount on", I put it into both SP, but it's still the same ... noresultset ...How can I display "SELECT * FROM tblFoo" within a SP, where SQLstatements are executed before?!Thank you!
View 1 Replies
View Related
Jul 20, 2005
Just wondering if this is good form:Alter Procedure "mySPName"@UniqueID intASset nocount onset xact_abort offDELETE FROM tblNameOneWHERE(tblNameOne.UniqueID = @UniqueID)DELETE FROM tblNameTwoWHERE(tblNameTwo.UniqueID = @UniqueID)Is it a good idea to run multiple detele statements within one SP?thanks,lq
View 5 Replies
View Related
Nov 3, 2005
Here's what I'm trying to accomplish:
View 5 Replies
View Related
May 17, 2007
If I have multiple selects statements in one stored procedure. How do I access the different results in a report in Reporting Services? Where the first select is the detail lines of my report and the second select is just a field for a my header? Or am I going about this wrong with putting it all the results I want into one stored procedure for one report?
Example stored procedure:
ALTER PROCEDURE [dbo].[proc_DepositsByOfficer]
As
SELECT MASTER_DSC.APP
, MASTER_DSC.BRANCH
, qlkpOfficer.strName
, MASTER_DSC.DSC_OFFICER_49
, qlkpBranchName.strDescrS
, MASTER_DSC.DSC_CUR_BAL_21
, Case MASTER_DSC.APP WHEN 1 Then DSC_CUR_BAL_21 End AS DDA_BAL
, Case MASTER_DSC.APP WHEN 2 Then DSC_CUR_BAL_21 End AS SAV_BAL
, Case MASTER_DSC.APP WHEN 3 Then DSC_CUR_BAL_21 End AS CD_BAL
, MASTER_DSC.DSC_INT_RATE_45
, Case When [DSC_CUR_BAL_21]>0 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End As ANN_EXP
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=1 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_DDA
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=2 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_SAV
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=3 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_CD
, Case MASTER_DSC.APP WHEN 1 Then 1 End AS DDA_Count
, Case MASTER_DSC.APP WHEN 2 Then 1 End AS SAV_Count
, Case MASTER_DSC.APP WHEN 3 Then 1 End AS CD_Count
, qlkpApplicationCode.strDescrS AS strApplCode
FROM
MASTER_DSC
INNER JOIN qlkpApplicationCode ON MASTER_DSC.APP=qlkpApplicationCode.dblReference
LEFT JOIN qlkpOfficer ON MASTER_DSC.DSC_OFFICER_49=qlkpOfficer.intID
LEFT JOIN qlkpBranchName ON MASTER_DSC.BRANCH=qlkpBranchName.dblReference
WHERE
MASTER_DSC.DSC_CUR_BAL_21<>0
ORDER BY
MASTER_DSC.BRANCH;
SELECT dbo.fBankName() AS BankName;
View 7 Replies
View Related
Sep 8, 2006
Hi Guys, I hope someone here can help me. I am writing a stored procedure that simply searches for a given value across multiple databases on the same server. So far all well and good.Now, the problem is if the user types in more than one word into the search field.I have put a partial section of code here, there is obviously more, but most of it you wouldn't need to see. SELECT @sql = N'SELECT @count = COUNT('+ @dbname +'.dbo.orders.order_id) FROM '+ @dbname +'.dbo.orders '+
N' INNER JOIN '+ @dbname +'.dbo.customer ON '+ @dbname +'.dbo.orders.cust_id = '+ @dbname +'.dbo.customer.cust_id '+
N' WHERE '+ @dbname +'.dbo.customer.forename LIKE ''%'+ @SearchStr + '%'' OR '+ @dbname +'.dbo.customer.Surname LIKE ''%'+ @SearchStr + '%'''
EXEC sp_executesql @sql, N'@count int OUTPUT', @count = @results OUTPUT Now this code works perfectly well if the user only enters one word, however i need to make sure that the Stored procedure will function if the user enters 2 words, such as John Smith. I need the procedure to search the forename for 'john' & 'Smith' and the same for the surname. It should also work if the user type 'John Michael Smith' - if you understand.I am really struggling with this one.Thanks in advance.Darren
View 2 Replies
View Related
Apr 24, 2007
Hello,
I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below:
Input field: Product Description
So if the user enters: "Large Drill" OR "Drill Large" the same resultset will be returned.
SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill"
I guess there'll need to be a nested Select and loop to parse the space separated input field.
Any pointers would be appreciated.
Thank you
Lee
View 2 Replies
View Related
Jun 25, 2007
I’m binding the distinct values from each of 9 columns to 9 drop-down-lists using a stored procedure. The SP accepts two parameters, one of which is the column name. I’m using the code below, which is opening and closing the database connection 9 times. Is there a more efficient way of doing this?
newSqlCommand = New SqlCommand("getDistinctValues", newConn)newSqlCommand.CommandType = CommandType.StoredProcedure
Dim ownrParam As New SqlParameter("@owner_id", SqlDbType.Int)Dim colParam As New SqlParameter("@column_name", SqlDbType.VarChar)newSqlCommand.Parameters.Add(ownrParam)newSqlCommand.Parameters.Add(colParam)
ownrParam.Value = OwnerID
colParam.Value = "Make"newConn.Open()ddlMake.DataSource = newSqlCommand.ExecuteReader()ddlMake.DataTextField = "distinct_result"ddlMake.DataBind()newConn.Close()
colParam.Value = "Model"newConn.Open()ddlModel.DataSource = newSqlCommand.ExecuteReader()ddlModel.DataTextField = "distinct_result"ddlModel.DataBind()newConn.Close()
and so on for 9 columns…
View 7 Replies
View Related
Jul 5, 2007
is there a way when making a stored procedure if i can enter the information in multiple tables?? say the primary key into another table to link the relationship? or should i just pull it out and then put in?
View 1 Replies
View Related
Jan 21, 2008
Hi all,
I’m returning two values from a stored procedure, one is a basic string confirming that an email has been sent and the other is the normal value returned from running an INSERT statement. So in my code I’m using the ExecuteNonQuery() method. I’m not sure how to handle both returned values in my code in my data layer. This is what I have:
ExecuteNonQuery(cmd);
return Convert.ToString(cmd.Parameters["@ReturnedValue"].Value).ToLower();
Obviously I’d need to return the value returned by the ExecuteNonQuery method as well, normally I’d simply convert the value to an int and precede this with the return keyword like so:
return (int)ExecuteNonQuery(cmd);
Obviously I can’t do this as I need to return two values, the normal value returned by the ExecuteNonQuery() method and my own output parameter value. Any ideas how I can do both? My current method containing the code further above returns a string but clearly this doesn’t help. I’m guessing that maybe I should return an object array so I can return both values? I haven’t encountered this problem before so I’m just guessing. Please help.
Thanks
View 4 Replies
View Related
Jan 31, 2008
I have a SP that has the correct syntax. However when I run my web-app it gives me this error: "Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. "
The procedure takes in three parameters and retrieves 23 values from the DB to display on my form.
Any ideas?
View 4 Replies
View Related
