Stored Procedure Vs Recordset

Nov 5, 2004

i am using .NET front end and back end SQL Server 2k.


for insert, update, delete and select queries what should i use stored procedure or direct sql through front end.

View 10 Replies


ADVERTISEMENT

Stepping Through A Recordset In A Stored Procedure

Feb 26, 2002

Help!

I am trying to write a stored procedure that will execute a SQL statement that returns multiple records. Then I need to be able to step through each record, examining a value in one of the fields (and then perform subsequent actions depending on the value).

My problem is that I don't know how to step through a recordset in T-SQL. There doesnt seem to be a "recordset" type object that I can move through. Or can this be done via a cursor? If so, how?

Any help is greatly appreciated!

Thanks!

Decidion

View 1 Replies View Related

Stored Procedure Not Returning Recordset From ADO

Jul 12, 2000

HELP HELP HELP!!

I have two questions.

I'm using VB 6.0 with ADO to SQL 7.0. My stored procedure works fine with Query Analyzer. I pass one parameter.

sp_test "1234"

And I get a recordset returned.

The stored procedure looks like this:

CREATE PROCEDURE sp_test
@facility_key varchar(255) = null
AS
/*DECLARE @sql1 varchar(255)*/

SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key

/*IF @facility_key <> null
PRINT "0"
BEGIN
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
END*/

When I uncomment the commented lines, I can still get a recordset returned using the query analyzer. And I get the same recordset returned when I use VB ADO and leave the stored proc lines commented out. However, when I call the procedure using the same VB code with the stored proc lines uncommented, I get -1 returned for rs.recordcount:

Private Sub Main_Click()
On Error GoTo Err_Main

Dim lsFacility As String
Dim lsReportName As String
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Dim gconn As ADODB.Connection
Dim param_facility_key As ADODB.Parameter

Dim gConnString As String

gConnString = "Trusted_Connection=Yes;UID=sa;PWD=yoyo;DATABASE=y ada;SERVER=ya;Network=dbnmpntw;Address=ya;DRIVER={ SQL Server};DSN=''"
Set gconn = New ADODB.Connection
Set rs = New ADODB.Recordset
Set cmd = New ADODB.Command
gconn.Open gConnString

cmd.Parameters.Refresh
lsFacility = "1234"

Set param_facility_key = cmd.CreateParameter("facility_key", adVarChar, adParamInput, 255)
cmd.Parameters.Append param_facility_key
param_facility_key.Value = lsFacility

cmd.CommandType = adCmdStoredProc
cmd.CommandText = "sp_reimbursement_report_test"
cmd.Name = "sp_reimbursement_report_test"

Set cmd.ActiveConnection = gconn

rs.Open cmd, , adOpenKeyset, adLockOptimistic

MsgBox rs.RecordCount

Exit_Main:
Screen.MousePointer = vbNormal
gconn.Close
rs.Close
Exit Sub

Err_Main:
Screen.MousePointer = vbNormal
MsgBox "Error " & Err.Number & " has occurred: " & Err.Description


End Sub


Here are my questions:

1. Why don't I get a recordset returned to VB if I have anything (the commented lines) except a simple SELECT statement in the stored proc.

2. Why must I do a Print "0" (or anything) command in the stored procedure within the IF statement to see a recordset return?

TIA for any help you can give....this one has been keeping me up....and my company down.

JWB

View 3 Replies View Related

Recordset Returning In Stored Procedure

Apr 2, 2000

Dear all,
I have a big problem in using SQL Server stored procedures:
When I have two select statement in the same procedure, the first one will use for returning specific information for the second one to select appropiate result to the client, but the stored procedure just return the first select statement recordset! What can I do? (I use VB Data Environment to access the stored procedures)

View 2 Replies View Related

Passing Recordset In A Stored Procedure

Jun 8, 2000

Is it possible to have a stored procedure that passes recordsets which are created and passed from different tables and joins the information in those recordsets to form one group of information?

View 1 Replies View Related

Stored Procedure To Return A Recordset

Dec 7, 2005

In a nutshell, I am trying to set a combobox's row source using a stored procedure. Surely there is an easy way to do that.

I am working with SQL 2000 as my back-end, and my front-end is an Access Project. The stored procedure I am trying to run is on a different database then the one my project is connected to, but from what I can see in my de-bugging efforts, that is not the problem.

The Stored Procedure;

CREATE PROCEDURE dbo.sp_eeLinksByName
@EmployerNum char(6)

AS

SELECT dbo.TIMS_eeLinksByName.eeLink, dbo.TIMS_eeLinksByName.Employee FROM dbo.TIMS_eeLinksByName
WHERE (dbo.TIMS_eeLinksByName.eeErNum = @EmployerNum)
ORDER BY dbo.TIMS_eeLinksByName.Employee

returns 169 records when I run it directly from the MS Visual Studio environment.


However whe I try to run it from VBA with the following code;

Dim sp_eeLinksByName As String
Dim ConnectionString As String
Const DSeeLinksByName = "SOS-1"
Const DBeeLinksByName = "Insync"
Const DPeeLinksByName = "SQLOLEDB"

Dim objeeLinksByNameConn As New ADODB.Connection
Dim objeeLinksByNameRs As New ADODB.Recordset
Dim objeeLinksByNameComm As New ADODB.Command

ConnectionString = "Provider=" & DPeeLinksByName & _
";Data Source=" & DSeeLinksByName & _
";Initial Catalog=" & DBeeLinksByName & _
";Integrated Security=SSPI;"

' Connect to the data source.
objeeLinksByNameConn.Open ConnectionString

' Set a stored procedure
objeeLinksByNameComm.CommandText = sp_eeLinksByName
objeeLinksByNameComm.CommandType = adCmdStoredProc
Set objeeLinksByNameComm.ActiveConnection = objeeLinksByNameConn

' Execute the stored procedure on
' the active connection object...
' "CurrTSCalendar" is the required input parameter,
' objRs is the resultant output variable.
objeeLinksByNameConn.sp_eeLinksByName CurrTSEmployer, objeeLinksByNameRs

' Display the result.
'Debug.Print "Results returned from sp_CustOrdersOrders for ALFKI: "
Select Case objeeLinksByNameRs.RecordCount
Case 0
'Do Nothing
Case Is > 0
'Get the Employee List
objeeLinksByNameRs.MoveFirst
Do While Not objeeLinksByNameRs.EOF
MyControl.AddItem (objeeLinksByNameRs.Fields("eeLink") & ";" & objeeLinksByNameRs.Fields("Employee"))
objeeLinksByNameRs.MoveNext
Loop
End Select

'Clean up.
'objRs.Close
objeeLinksByNameConn.Close
Set objeeLinksByNameRs = Nothing
Set objeeLinksByNameConn = Nothing
Set objeeLinksByNameComm = Nothing

I get an "Object Variable or With Blick Vraiable not Set"...... for the life of me I do not know why? Does anyone have any thoughts?

View 7 Replies View Related

Stored Procedure Not Returning Recordset

Jun 12, 2008

The stored procedure I created returns all records from the table if no parameters are passed, as expected. When I pass in the only parameter, I get 0 records returned when there should be one or more returned. I'm sure it's something simple in my syntax, but I don't see it.

This call returns all records:
exec webservices_BENEFICIAL_USES_DM_SELECT

This call returns 0 records, when it should return 1:
exec webservices_BENEFICIAL_USES_DM_SELECT @DISPOSAL_AREA_NAME='Cell 8'

Here is the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;

-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = '@DISPOSAL_AREA_NAME'
END

END

View 4 Replies View Related

Stored Procedure Not Returning Recordset In ASP

Jul 23, 2005

Hi All. My question is this. I have a complex stored procedure in SQLServer which works fine when I run it in Query Analyzer. However, whenI call it within my ASP script, it returns nothing, and sometimes locksup. If I change my script to call other existing stored procedures itworks fine. It's just with this particular stored proc. I have triedvarious DB calls in ASP, such as opening the recordset through an ADOconnection and through the Command object but to no avail. Here is mySQL:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOALTER PROCEDURE dbo.sp_getProfessionalsByTypeID@typeID intASdeclare @catID intdeclare @userID intdeclare @strUserName varchar(100)declare @strFirstName varchar(100)declare @strLastName varchar(100)declare @strTypeName varchar(100)declare @strCategoryName varchar(100)declare @strPictureURL varchar(100)declare @sql varchar(1000)declare @a varchar(100)declare @b varchar(100)declare @c varchar(100)declare @d varchar(100)beginset @a=''set @b=''set @c=''set @d=''--Create Temp TableCREATE TABLE #QueryResult (nCatID int, nTypeID int, nUserID int,strUserName varchar(100), strFirstName varchar(100), strLastNamevarchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100))--Search QuerybeginINSERT #QueryResultSELECTdbo.tbl_musician_type.nCatID, dbo.tbl_musician_type.nTypeID,dbo.tbl_users.nUserID, dbo.tbl_users.strUserName,dbo.tbl_users.strLastName,dbo.tbl_users.strFirstName,dbo.tbl_musician_type.strTypeName, dbo.tbl_category.strCategoryName,dbo.tbl_professionals.strPictureURLFROMdbo.tbl_musician_type INNER JOINdbo.tbl_category ON dbo.tbl_musician_type.nCatID= dbo.tbl_category.nCategoryID INNER JOINdbo.tbl_profile ONdbo.tbl_musician_type.nTypeID = dbo.tbl_profile.nTypeID INNER JOINdbo.tbl_users ON dbo.tbl_profile.nUserID =dbo.tbl_users.nUserID LEFT OUTER JOINdbo.tbl_professionals ON dbo.tbl_users.nUserID= dbo.tbl_professionals.nUserIDWHEREdbo.tbl_musician_type.nTypeID = @typeIDend--Create Temp TableCREATE TABLE #QueryResult2 (ID int IDENTITY,nCatID int, nTypeID int,nUserID int, strUserName varchar(100), strFirstName varchar(100),strLastName varchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100), strArtist varchar(100),strAlbumTitle varchar(100), strRecordLabel varchar(100), strYearvarchar(100))--Now Declare the Cursor for Speakersdeclare cur_musicians CURSOR FOR--Combined Results Groupedselect distinct nCatID, nTypeID, nUserID, strUserName, strLastName,strFirstName, strTypeName, strCategoryName, strPictureURLFrom #QueryResultopen cur_musiciansfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURL--Loop Through Cursorwhile @@FETCH_STATUS = 0beginSELECT TOP 1 @a = strArtist, @b=strAlbumTitle,@c=strRecordLabel, @d=strYearFROM dbo.tbl_profile_discogwhere nTypeID = @typeID AND nCategoryID = @catID AND nUserID =@userIDinsert #QueryResult2select @catID as nCatID, @typeID as nTypeID, @userID as nUserID,@strUserName as strUserName, @strLastName as strLastName, @strFirstNamestrFirstName, @strTypeName as strTypeName, @strCategoryName asstrCategoryName, @strPictureURL as strPictureURL, @a ashighlightArtist, @b as highlightAlbumTitle, @c as highlightRecordLabel,@d as highlightYearfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURLset @a = ''set @b=''set @c=''set @d=''endselect * from #QueryResult2 TI--Clean Upclose cur_musiciansdeallocate cur_musiciansdrop table #QueryResultdrop table #QueryResult2endGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO

View 5 Replies View Related

Filling SQLDataReader With Stored Procedure Recordset

Jun 7, 2007

Hi All,
 I'm hoping somebody can help me with this as it is driving me mad. I've created a stored procedure which returns Employee information recordset when the windows username is passed to it as a parameter. I want to then store this information in Session variables so content can be filtered depending on employee status, but when I execute my code no records are returned. I know for a fact that the stored procedure works because I bound it sqldatasource and displayed results from it in a Datalist and tested it in sql server. My code is as follows can anybody see any problems with it, in runs through fine with but when I try a read a field from the datareader in says there is no data to read.
   Dim CurrentUser As String, Pos1 As Int16, EmployeeId As Int32
Dim cn As New System.Data.SqlClient.SqlConnection
Dim param As New System.Data.SqlClient.SqlParameter
Dim reader As System.Data.SqlClient.SqlDataReader
Dim cmd As New System.Data.SqlClient.SqlCommand

CurrentUser = CStr(User.Identity.Name)
Pos1 = InStr(CurrentUser, "") + 1
CurrentUser = Mid(CurrentUser, Pos1)
Session("User") = CurrentUser
Session("CID") = Nothing

cn.ConnectionString = "Data Source=LAPTOP-4SQLEXPRESS;Initial Catalog=SCMdb;Integrated Security=True"
cn.Open()

cmd.Connection = cn
cmd.CommandText = "CurrentUser"
cmd.CommandType = CommandType.StoredProcedure

param = cmd.CreateParameter
param.ParameterName = "@UserName"
param.SqlDbType = SqlDbType.VarChar
param.Value = CurrentUser

cmd.Parameters.Add(param)
reader = cmd.ExecuteReader(CommandBehavior.CloseConnection)
EmployeeId = reader.Item("EmployeeID")
reader.Close()
 Any help would be much appricated this is driving me mad.
Thank You
Shaft

View 5 Replies View Related

Edit Recordset That Was Created By A Stored Procedure

Nov 16, 2001

I'm using the ADO command object to call a stored procedure in SQL Server from Access 2000.

Set rst = cmd.execute

I receive the correct data back but I can't edit the recordset or addnew.

Is this possible????

Thanks

View 1 Replies View Related

Returning A Recordset From A Stored Procedure In ADO / VBScript

Sep 24, 2003

I'm having trouble getting a recordset out of stored procedure in ADO. The SP executes without errors, but the recordset object I return into is always closed.Here is my code:

<%
......
Set cmm = Server.CreateObject("ADODB.Command")
Set cmm.ActiveConnection = Connect
cmm.CommandType = adCmdStoredProc
cmm.CommandText = "dbo.client_updates_proc"
cmm.Parameters.Refresh
cmm.Parameters(1) = client_id
Set logRS = cmm.Execute()
if not logRS.EOF then
......
%>

My SP has one parameter, which I set above, and it ends with a select statement. When I run the SP in Query Analyzer, it outputs the table of results as is should, but I always get an error on 'if logRS.EOF then', saying that the object is closed.

View 3 Replies View Related

Append Recordset Returned From A Stored Procedure

May 12, 2004

I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?

Private Sub Form_Open(Cancel As Integer)
dim ...

Set add_bag_results = Nothing
With add_bag_results
.ActiveConnection = CurrentProject.Connection
.CommandType = adCmdStoredProc
.CommandText = "spSampling_add_bag_results"
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
'.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1))
.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n)
..
Set rs_add_bag_results = .Execute
End With

Me.RecordSource = rs_add_bag_results ?

Thanks!

View 2 Replies View Related

Returing ADO Recordset From Stores Procedure

Nov 24, 2003

I have a Stored Procedure that I am calling from ADO 2.7 in Visual Basic. The process works fine when the stored procedure has records to return. However , when the recordset is return emtpy ADO does not recognize the recordset as being open and empty. For example:
VB Code to open recordset:
Set rstClass1 = New ADODB.Recordset
With rstClass1
.CursorLocation = adUseServer
Set .ActiveConnection = DBConn
.Source = strRecordSource
.LockType = adLockOptimistic
.CursorType = adOpenKeyset
.Open
If Not .EOF Or Not .BOF Then

The program bombs on the If Not .EOF statement with Error 3704 -
"Operation is not allowed when the object is closed.


When I run the Stored Procedure In QA using an ID that I know will NOT return any records the result window returns nothing. I noticed that on some of my other SP's the result window will at least return the column titles. These SP's also do not produce the 3704 error in ADO.

Is there a command or a certain method to construct my SP so that is will return enough for ADO to know that the recordset did open its just empty?

The SP is ugly looking but I will post if need be.

View 3 Replies View Related

Return Recordset And A Variable From Procedure

May 28, 2005

Hi

I want a functionality such that I want to return a select query resultset and a varchar variable from a procedure. How can I achieve that,and moreover how can I fetch them in ASP??

Waiting for someone to shed a light of hope.
Thanx a lot

View 1 Replies View Related

Returning Recordset From Stored Proc

Mar 7, 2008

I need to return a rowset from a stored procedure.  The returned rows will have ten columns and need to be bound to a gridview.  Here is a code snippet.
'Create a DataAdapter, and then provide the name of the stored procedure.MyDataAdapter = New SqlDataAdapter("TMPTABLE_QUERY", MyConnection)
'Set the command type as StoredProcedure.
MyDataAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
'Create and add a parameter to Parameters collection for the stored procedure.MyDataAdapter.SelectCommand.Parameters.Add(New SqlParameter("@condition_cl", _
SqlDbType.VarChar, 100))
'Assign the search value to the parameter.MyDataAdapter.SelectCommand.Parameters("@condition_cl").Value = sqlwhere & orderby
'ASSIGN THE OUTPUT PARAMETERS. HERE IS WHERE I NEED HELP  (?????????????????)
 
DS = New DataSet() 'Create a new DataSet to hold the records.
MyDataAdapter.Fill(DS, "TMPTABLE_QUERY") 'Fill the DataSet with the rows returned.
'Set the data source for the DataGrid as the DataSet that holds the rows.GridView1.DataSource = DS.Tables("TMPTABLE_QUERY").DefaultView
GridView1.DataBind()
MyDataAdapter.Dispose() 'Dispose of the DataAdapter.
MyConnection.Close()
 
In my little research, I have seen examples of how to return a single value, but not multiple rows.  I essentially have two problems.  I'm not sure how my output parameters are to be defined and added.  Do I need a separate 'Parameters.Add' statement for each column field value returned or can I do a single 'Parameters.Add' statement to define the whole row as an output parameter?  Also, upon returning from the call to the SP, will I need a looping mechanism to populate the recordset for each individual record returned, or will the 'MyDataAdapter.Fill(DS, "TMPTABLE_QUERY") suffice, as included in my code above?
Thanks in advance.

View 3 Replies View Related

Possible To Link 2 Stored Procedures To Produce Only 1 Recordset?

Sep 16, 2004

Hello everybody!

trying to do the following:

-create a report in access project

-got 3 stored procedures which return data that shall be shown on report

-need one recordset as datasource (or can i use more than one here?)

Problem:

Data was unrelated before, now needs to be on same report, that's why until now i have 3 different pretty complex stored procedures returning a recordset each.

I could of course copy and paste the whole 3 into 1 new stored proc, but when one changes i had to change the newly created one too (which might get messy when doing a lot of maintenance and changes on the others)

Can create a stored procedure that simply integrates those 3 into one recordset something like this (in pseudo-code):

CREATE PROCEDURE IntegrateSPs AS

INTEGRATE
SP1,SP2,SP3
INTO myRecordset

Anything like this possible?

thx in advance,

Kuma

View 14 Replies View Related

New To Stored Procedures: Where To Find The Recordset Retrieved?

Aug 8, 2006

Hi,

This may be a really silly question, but I am starting to experiment with stored procedures for the first time and I am not really sure about how they work. I am working in SQL Server Management Studio Express...

When putting a SELECT query statement into a stored procedure and executing it, how or where can you get or find the actual record set supposedly retrieved?

Thanks for any help..

--------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery]     @taxparent int = 1ASBEGIN    SET NOCOUNT ON;    SELECT ID, TaxonID, Taxon    FROM QueryView    WHERE         ParentID1 = COALESCE(@taxparent, ParentID1) AND        ParentID2 = COALESCE(@taxparent, ParentID2) AND        ParentID3 = COALESCE(@taxparent, ParentID3) AND        ParentID4 = COALESCE(@taxparent, ParentID4) AND        ParentID5 = COALESCE(@taxparent, ParentID5) AND        ParentID6 = COALESCE(@taxparent, ParentID6) AND        ParentID7 = COALESCE(@taxparent, ParentID7) AND        ParentID8 = COALESCE(@taxparent, ParentID8)END

View 1 Replies View Related

Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)

Nov 1, 2007

Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly.  For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') 
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). 
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
 

View 1 Replies View Related

Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?

Mar 3, 2008

Hi all,

I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):

(1) /////--spTopSixAnalytes.sql--///

USE ssmsExpressDB

GO

CREATE Procedure [dbo].[spTopSixAnalytes]

AS

SET ROWCOUNT 6

SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName

FROM LabTests

ORDER BY LabTests.Result DESC

GO


(2) /////--spTopSixAnalytesEXEC.sql--//////////////


USE ssmsExpressDB

GO
EXEC spTopSixAnalytes
GO

I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")

Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)

sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure

'Pass the name of the DataSet through the overloaded contructor

'of the DataSet class.

Dim dataSet As DataSet ("ssmsExpressDB")

sqlConnection.Open()

sqlDataAdapter.Fill(DataSet)

sqlConnection.Close()

End Sub

End Class
///////////////////////////////////////////////////////////////////////////////////////////

I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)

Please help and advise.

Thanks in advance,
Scott Chang

More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.




View 11 Replies View Related

T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure

Nov 14, 2014

I am new to work on Sql server,

I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.

Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.

View 1 Replies View Related

SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?

Jan 29, 2015

I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?

CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],

[Code] ....

View 9 Replies View Related

Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.

Sep 19, 2006

I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.

How do I do that? Articles, code samples, etc???

View 1 Replies View Related

Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page

Dec 28, 2005

I have a sub that passes values from my form to my stored procedure.  The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page.  Here's where I'm stuck:    Public Sub InsertOrder()        Conn.Open()        cmd = New SqlCommand("Add_NewOrder", Conn)        cmd.CommandType = CommandType.StoredProcedure        ' pass customer info to stored proc        cmd.Parameters.Add("@FirstName", txtFName.Text)        cmd.Parameters.Add("@LastName", txtLName.Text)        cmd.Parameters.Add("@AddressLine1", txtStreet.Text)        cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue)        cmd.Parameters.Add("@Zip", intZip.Text)        cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text)        cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text)        cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text)        cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text)        cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text)        ' pass order info to stored proc        cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue)        cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue)        cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue)        'Session.Add("FirstName", txtFName.Text)        cmd.ExecuteNonQuery()        cmd = New SqlCommand("Add_EntreeItems", Conn)        cmd.CommandType = CommandType.StoredProcedure        cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc)   <-------------------------        Dim li As ListItem        Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar)        For Each li In chbxl_entrees.Items            If li.Selected Then                p.Value = li.Value                cmd.ExecuteNonQuery()            End If        Next        Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder)  and pass that to my second stored procedure (Add_EntreeItems)

View 9 Replies View Related

SQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?

Sep 26, 2014

I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure

at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT

I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT

View 3 Replies View Related

System Stored Procedure Call From Within My Database Stored Procedure

Mar 28, 2007

I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.

How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?

Thanks in advance

View 9 Replies View Related

Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure

Jan 23, 2008



Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio

What could explain this?

Obviously,

All three scenarios are executed against the same database and hit the exact same tables and indices.

Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).

The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes

View 1 Replies View Related

User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net

Sep 13, 2007

Hi all,



I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.



Whenever I tried to right click stored procedure and select step into store procedure> i get following error



"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"



I am not sure what needs to be done on sql server side



We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.

Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?



Please advise..

Thank You

View 3 Replies View Related

Is The Transaction Context Available Within A 'called' Stored Procedure For A Transaction That Was Started In Parent Stored Procedure?

Mar 31, 2008

I have  a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
 Any help on this would be appreciated.

View 1 Replies View Related

Calling Stored Procedure Fromanother Stored Procedure

Oct 10, 2006

Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames

View 16 Replies View Related

Use Resultset Returned From A Stored Procedure In Another Stored Procedure

Nov 15, 2006

I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
 Thanks,
Kevin

View 3 Replies View Related

SQL Stored Procedure Issue - Search Stored Procedure

May 18, 2007

This is the Stored Procedure below -> 
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/2/2007 4:52:19 PM ******/
 
CREATE  PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
 
IF (@i_WildCardFlag=0)BEGIN
 SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN   BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND  ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN  BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND  ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
 
 
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
 
Please help me regarding the same.
 
Thanks in advance.
 
Sandeep Kumar
 

View 2 Replies View Related

Sql Count Using Stored Procedure Withing Stored Procedure

Apr 29, 2008

I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks

View 10 Replies View Related

Exec Twp Stored Procedure In A Main Stored Procedure

Apr 29, 2004

Hi there

i have a stored procedure like this:

CREATE PROCEDURE SP_Main

AS
SET NOCOUNT ON

BEGIN TRANSACTION

exec SP_Sub_One output

exec SP_Sub_Two output


IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran

return
GO


now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.

now i can put the "begin transation" in the two sub stored procedure's. The problem is

what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"

now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data

how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.

Thanks in advance

Mahmoud Manasrah

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved