Stored Procedures And Multiple Tables
Mar 2, 2006
Hi,
I am hoping someone can help me with creation of a stored procedure. What i would basically like to do is have a SELECT stored Procedure that gets values from one table and then uses these values to retrieve data from another table.
i.e. I would like to retrieve 2 dates from another table (the table has a single record that holds the 2 dates) then I would like to use those two dates to retrieve all records of another table that fall between those 2 dates.
As I know nothing about stored procedures I'm not even sure how to go about this??
Regards.
Peter.
View 2 Replies
ADVERTISEMENT
Sep 3, 2007
Hi,
I am using multiple stored procedures which are using same set of tables at a time .
As stored procedures dont have any DMLs. they are just select statement copied into a temporary table for further processing.
My issue is ,I dont want to wait one stored procedure until the other stored procedure is completed.
as one stored procedure is taking 43 secs and another sp is taking one min .they are conmbinely taking 1:43 mins
where i want to take just 1 min which is the time took by second sp
I want this because i am calling all the stored procedures more than 5 in my reporting services to show in one report which is taking huge time
Please suggest me how to proceed here.i am stuck
what should i do with the tables or stored procedures?
Thank you
Raj Deep.A
View 4 Replies
View Related
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
View 2 Replies
View Related
Apr 29, 2008
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
View 1 Replies
View Related
Mar 26, 2008
Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
View 9 Replies
View Related
Dec 7, 2007
I have a simple question: Can I have two or more stored procedures that begin transactions but the last stored procedure will commit all transactions if there was no error?
In other words, I have a stored procedure that performs some legacy stuff. I do not want to rewrite that logice, execpt I am putting it into a Stored Procedure since it currently is embedded SQL.
To support newer functionality, I am writing data to additional new tables. However, I do not want the *new* things to occur if there is an error. This is easy enough, I dont call the Stored Procedure for the new functionality if there was an error. However, if there was not an error and the newer stored procedure is called AND there is an error in the new stored procedure, I want to ROLLBACK the changes from the proceeding stored procedures.
To my understanding, I can name transactions but that is only to indicate in the logs what transactions have failed.
I thought about not using transactions for any of the individual stored procedures and calling them from a main stored procedure. The main stored procedure will have a BEGIN TRY and an END TRY (I am using SQL Server 2005) and at the top (right after the try) I will have a BEGIN TRANSACTION. In the BEGIN CATCH I will have a ROLLBACK and at the end I will have a COMMIT. If any of the stored procedures fail at any point it will cause the catch to occur thus rolling back all of my transactions. This would be the easiest way but I still need to deal with the question of, "What happens if any single stored procedure is called?" I guess I could have try and catches in each individual stored procedure for that.
I just want to make sure I am not overlooking something simple. I think I have the right idea by doing it this way I mentioned above. Because this is critical billing processing I just want to have some reassurance that this would work.
Thank
View 4 Replies
View Related
Apr 13, 2008
My stored procedure looks like this:
ALTER PROCEDURE dbo.Calculate
AS
BEGIN
SET NOCOUNT ON
declare @lastUpdate varchar(15)
declare @sql nvarchar(4000)
declare LastUpdate cursor for select updateID from currentUpdate
OPEN lastUpdate
FETCH NEXT FROM LastUpdate INTO @lastUpdate
SELECT @sql = 'INSERT INTO A ...WHERE ..' + @lastUpdate
EXEC(@sql)
SELECT @sql = 'INSERT INTO B ...WHERE...' + @lastUpdate
EXEC(@sql)
SELECT @sql = 'UPDATE ...WHERE...' + @lastUpdate
EXEC(@sql)
CLOSE LastUpdate
DEALLOCATE LastUpdate
END
When I run this stored procedure from my web page, only the first sql is executed and then I get a timeout message.
When I execute the stored procedure manually on the server, all the sqls are executed correctly.
How can I solve this problem?
Thank You.
View 1 Replies
View Related
Jan 5, 2004
Am i the only one who is forced to open multiple instances of SQL Server Enterprise Manager in order to edit more than one stored procedure at a time? A lot of times i'll be comparing two sprocs or writing one based off of a "template" i wrote earlier. But i have to open two instances and alt-tab between them. Is there an easier way? (aside from pasting it into a notepad and using that)
View 5 Replies
View Related
May 1, 2008
Hey
I am creating a database application that is accessed through a .NET front end.
What I want to do is run a SQL script that will create my DB, create my indexes and enforce my constraints (all of which I have done) but I also want to create my stored procedures in the same script also.
When I merge all my stored procedures (about 16) into one file and run it in SQL Query Analyzer I get multiple errors but the one that is coursing me the most bother is
‘Server: Msg 156, Level 15, State 1, Procedure procedureName, Line 134
Incorrect syntax near the keyword 'procedure'.’
What does this mean and why can’t I run more than once Stored Procedure at once?
Many thanks
Quish
View 2 Replies
View Related
Apr 27, 2007
I have two questions:
1) Is it possible to rename a SQL table –or- copy the content of a table into a new table ?
2) How to replace the renamed or replaced table name inside the code of ALL Stored Procedures that references it ?
View 3 Replies
View Related
Feb 25, 2008
I have 50-60 stored procedures in my application and these are stored in different files as per file one stored procedudre.
I want to deploy my applicaiton. I want to create a batch or Single SQL file to create all stored precodures in on go.
My objective is to ensure that No stored procedure has left while deploying the applicaiton.
thanks.
View 3 Replies
View Related
May 1, 2008
Hey
I am creating a database application that is accessed through a .NET front end.
What I want to do is run a SQL script that will create my DB, create my indexes and enforce my constraints (all of which I have done) but I also want to create my stored procedures in the same script also.
When I merge all my stored procedures (about 16) into one file and run it in SQL Query Analyser I get multiple errors but the one that is coursing me the most bother is
€˜Server: Msg 156, Level 15, State 1, Procedure procedureName, Line 134
Incorrect syntax near the keyword 'procedure'.€™
What does this mean and why can€™t I run more than once Stored Procedure at once?
Many thanks
Quish
View 9 Replies
View Related
Jul 20, 2005
SQL Server 2000:Question 1If you drop / rename a table and then recreate the table with the SAMENAME, what impact does it have on stored procedures that use these tables?From a system perspective, do you have to rebuild / recompile ALL the storedprocedures that use this table?I had a discussion with someone that said that this is a good idea, sincethe IDs of the tables change in sysobjects and from a SQL SERVER query planperspective, this needs to be done...Question 2If you Truncate a Tables as part of a BEGIN TRANSACTION, what happens if anerror occurs? Will it Rollback? The theory is that it won't becauseTruncate doesn't utilize the logs where as Delete From uses the SQL Logs?Thanks!
View 3 Replies
View Related
May 12, 2008
Hello All,I can not figure out how to accomplish the task that I want. So, please help.I have two tables, Parent and Child tables. For both Tables I have stored procedures for inserting records. I simply pass parameters for field values to stored proecdures and Stored procedures simply insert record with those values. I am first inserting record in Parent table and then in child table via calling their stored procedures one by one.Now, what I want to do is, after inserting record in parent table successfully, If record can not be inserted in child table successfully then I want to rollback, I also want to undo the insertion operation done in previous parent table's stored procedure call. The problem is, I can not span a Transaction across multiple stored procedure. If I begin a Transaction in a stored procedure for a Parent table, then I have to either roll back or commit that transaction in the same stored procedure. How can I span a transaction across multiple stored procedures, so that I can rollback in the Child Table's stored procedure in such a way that the Record Insertion of the Parent table can be cancelled. What to do...? Please help, it's urgent. Thanks to all.
View 4 Replies
View Related
Jun 20, 2007
Hello.
I have my database and i generated the script that creates the entire database. My database has some stored procedures.
When i create the script without the stored procedures, everything works fine when i try to reinstall the database. But if i create the script with the stored procedures, i get the following error message when i try to reinstall the database:
Code:
System.Data.SqlClient.SqlException: 'CREATE/ALTER PROCEDURE' must be the first statement in a query batch.
Incorrect syntax near the keyword 'PROCEDURE'.
Must declare the scalar variable "@time1".
as i understand, i must have 1 storedprocedure per script. I tried separating one stored procedure per script and everything works fine, the problem here is that i have many many stored procedures.
Now, is there a way to have multiple stored procedures in one single sqlscript?
Do i really need to separate my stored procedures in one script per stored procedure or is there any way to put them all in one single script?
THANKS FOR YOUR HELP!!
View 1 Replies
View Related
Aug 31, 2007
Hi all,
Does anyone know how to do the search and replace in multiple stored procedures using SQL 2005 Management Studio?
Any help will be appreciated.
Thanks!
View 3 Replies
View Related
Jun 22, 2007
How to return multiple values from stored procedures to reports in sql server 2005
View 5 Replies
View Related
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
View 1 Replies
View Related
Jan 3, 2008
I'm running this legacy DTS package under SQL Server 2005, and need to make some changes.
I have some (say, 3) stored procedures, and they all have one same parameter. Each SP returns a dataset. I need to import each dataset to a table using DTS. Both the SPs and the destination tables are in the same database.
So, I created an "Execute SQL Task" and typed in "SQL Statement" something like this:
INSERT INTO TABLE TABLE1
EXEC SP1 ?
GO
INSERT INTO TABLE TABLE2
EXEC SP2 ?
GO
INSERT INTO TABLE TABLE3
EXEC SP3 ?
GO
And the execution returns an error: No value given for one or more required parameters.
Is it possible to assign a parameter to all three SPs? What is the work out if I don't want to change the SPs, and I don't want to create 3 Execute SQL Tasks?
View 4 Replies
View Related
Mar 1, 2007
Hello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
View 9 Replies
View Related
Apr 28, 2007
Hi,I'm trying to insert some values into 2 tables using stored procedures (which should be pretty straight forward) but I'm running into problems.Given below are my 2 sp that I'm using:
View 5 Replies
View Related
Feb 14, 2008
hi I'm working in VS2005 with SQL server Express database.How can I copy some tables, stored procedures and diagrams from one database to another? thanks
View 3 Replies
View Related
Feb 14, 2006
Hello all!
What I need to do is take a site that I have and make 3 copies of it so I will have 4 separate sites with 4 separate DB's but running on the same server. One of the sites is complete but what I need to know is how do I make a complete copy of the DB including all stored procedures and populate a blank DB that has a different name with contents from the master DB???
So if DB1 is complete and I want to now populate DB2, DB3 and DB4 with everything from DB1 (tables, stored procedures, data etc.) what would be the best way to do this?
The new sites are already setup in IIS and I have already transferred the files to each sites root, so all that is left is to setup the new DB's. They are all running on the same server… I think that is about everything someone would need to know to help me!
Any help would be greatly appreciated!!!
View 3 Replies
View Related
Jan 17, 2008
Is there any oen can tell me how i can run some system sp or exec something to list all tables or stored procedures in a database, like i use select statement to list some coulmn data? thanks in advance.
View 3 Replies
View Related
Nov 23, 2007
If you use a stored procedure that references one or more temp tables as data dource for a report, you get an error saying that the temp tables cannot be found when you click on the Layout tab. This happens even if you have executed the query in the Data tab before going to the Layout tab. The work around is to simply ignore the error but it is a distraction for the user. Is this a known big that is going to be fixed in a future release?
View 3 Replies
View Related
Oct 22, 2007
Hi i have always used views in my code to group common functionality in my sql expressions and then i can simply call these views in my data access layer by saing:
SqlCommand cmd = new SqlCommand("SELECT * FROM vw_Documents WHERE CategoryID = @CategoryID", cn);
However my view has become so complicated that i had to convert it to a stored procedure called sp_Documents. The problem now though is that is that i wish to do queries against the data returned but i can't simply say:
SqlCommand cmd = new SqlCommand("SELECT * FROM sp_Documents WHERE CategoryID = @CategoryID", cn);
The only way i can see to do it is to create a stored procedure for every single senario i have passing in the appropriate values as parameters. This seems a pretty messy solution to me because i would have repeated logic in all my stored procedures. Therefore i was wondering if there's a simpler way for me to do this or am i just being lazy :).
Appreciate if someone could help,
View 2 Replies
View Related
Jun 4, 2008
I am trying to insert each record coming from my DataTable object to sql server database. The problem that I have is that I have my stored procedures within the loop and it work only for one record, because it complaing that there are too many parameters. Is there a way i can add up my parameters before the loop and avoid this issue?
Here is the code I am using:Public Sub WriteToDB(ByVal strDBConnection As String, ByVal strFileName As String, ByVal strTable As String)
'Fill in DataTable from AccessDim objConn As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & strFileName)
Dim adapter As New OleDbDataAdapter()Dim command As New OleDbCommand
Dim DataTable As New DataTableDim sqlCommand = "SELECT * FROM " & strTableDim objDataTable As New DataTable
objConn.Open()
command.CommandType = CommandType.Text
command.Connection = objConn
command.CommandText = sqlCommandadapter = New OleDbDataAdapter(command)DataTable = New DataTable("NFS")
adapter.Fill(DataTable)
'Sql DB vars
'Dim dtToDBComm = "INSERT INTO NFS_Raw(Time, Exch, Status) VALUES ('test', 'test', 'test')"Dim sqlServerConn As New SqlConnection(strDBConnection)Dim sqlServerCommand As New SqlCommand
sqlServerCommand = New SqlCommand("InsertFromAccess", sqlServerConn)
sqlServerCommand.CommandType = CommandType.StoredProcedure
sqlServerConn.Open()For Each dr As DataRow In DataTable.Rows
sqlServerCommand.Parameters.Add(New SqlParameter("@Time", dr.ItemArray(0).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Exch", dr.ItemArray(1).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Status", dr.ItemArray(2).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Msg", dr.ItemArray(3).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Action", dr.ItemArray(4).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@BS", dr.ItemArray(5).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@OC", dr.ItemArray(6).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@CP", dr.ItemArray(7).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Qty", dr.ItemArray(8).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Product", dr.ItemArray(9).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@MMMYY", dr.ItemArray(10).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Strike", dr.ItemArray(11).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Limit", dr.ItemArray(12).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@StopPrc", dr.ItemArray(13).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Type", dr.ItemArray(14).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Rstr", dr.ItemArray(15).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@TIF", dr.ItemArray(16).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@RstrQty", dr.ItemArray(17).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExecQty", dr.ItemArray(18).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@WorkQty", dr.ItemArray(19).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@CxlQty", dr.ItemArray(20).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@AccountNum", dr.ItemArray(21).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchMbrID", dr.ItemArray(22).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@ExchGrpID", dr.ItemArray(23).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchTrdID", dr.ItemArray(24).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@MemberID", dr.ItemArray(25).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@GroupID", dr.ItemArray(26).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@NTrdID", dr.ItemArray(27).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Acct", dr.ItemArray(28).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@ExchTime", dr.ItemArray(29).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchDate", dr.ItemArray(30).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TimeSent", dr.ItemArray(31).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@TimeProcessed", dr.ItemArray(32).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@PA", dr.ItemArray(33).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@OrderNo", dr.ItemArray(34).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TTOrderKey", dr.ItemArray(35).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@IP", dr.ItemArray(36).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@FFT3", dr.ItemArray(37).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@FFT2", dr.ItemArray(38).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@SubmitTime", dr.ItemArray(39).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@SubmitDate", dr.ItemArray(40).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TransID", dr.ItemArray(41).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@SessionID", dr.ItemArray(42).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@SeriesKey", dr.ItemArray(43).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchangeOrderID", dr.ItemArray(44).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Destination", dr.ItemArray(45).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@FlowDeliveryUnit", (dr.ItemArray(46))))sqlServerCommand.Parameters.Add(New SqlParameter("@TimeReceived", dr.ItemArray(47).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@CallbackReceived", dr.ItemArray(48).ToString()))
sqlServerCommand.ExecuteNonQuery()Next
sqlServerConn.Close()
objConn.Close()
End Sub
Thanks for eveones input in advance.
View 4 Replies
View Related
Jun 4, 2008
I am trying to insert each record coming from my DataTable object to sql server database. The problem that I have is that I have my stored procedures within the loop and it work only for one record, because it complaing that there are too many parameters. Is there a way i can add up my parameters before the loop and avoid this issue?
Here is the code I am using:Public Sub WriteToDB(ByVal strDBConnection As String, ByVal strFileName As String, ByVal strTable As String)
'Fill in DataTable from AccessDim objConn As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & strFileName)
Dim adapter As New OleDbDataAdapter()Dim command As New OleDbCommand
Dim DataTable As New DataTableDim sqlCommand = "SELECT * FROM " & strTableDim objDataTable As New DataTable
objConn.Open()
command.CommandType = CommandType.Text
command.Connection = objConn
command.CommandText = sqlCommandadapter = New OleDbDataAdapter(command)DataTable = New DataTable("NFS")
adapter.Fill(DataTable)
'Sql DB vars
'Dim dtToDBComm = "INSERT INTO NFS_Raw(Time, Exch, Status) VALUES ('test', 'test', 'test')"Dim sqlServerConn As New SqlConnection(strDBConnection)Dim sqlServerCommand As New SqlCommand
sqlServerCommand = New SqlCommand("InsertFromAccess", sqlServerConn)
sqlServerCommand.CommandType = CommandType.StoredProcedure
sqlServerConn.Open()For Each dr As DataRow In DataTable.Rows
sqlServerCommand.Parameters.Add(New SqlParameter("@Time", dr.ItemArray(0).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Exch", dr.ItemArray(1).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Status", dr.ItemArray(2).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Msg", dr.ItemArray(3).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Action", dr.ItemArray(4).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@BS", dr.ItemArray(5).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@OC", dr.ItemArray(6).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@CP", dr.ItemArray(7).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Qty", dr.ItemArray(8).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Product", dr.ItemArray(9).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@MMMYY", dr.ItemArray(10).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Strike", dr.ItemArray(11).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Limit", dr.ItemArray(12).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@StopPrc", dr.ItemArray(13).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Type", dr.ItemArray(14).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Rstr", dr.ItemArray(15).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@TIF", dr.ItemArray(16).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@RstrQty", dr.ItemArray(17).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExecQty", dr.ItemArray(18).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@WorkQty", dr.ItemArray(19).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@CxlQty", dr.ItemArray(20).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@AccountNum", dr.ItemArray(21).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchMbrID", dr.ItemArray(22).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@ExchGrpID", dr.ItemArray(23).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchTrdID", dr.ItemArray(24).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@MemberID", dr.ItemArray(25).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@GroupID", dr.ItemArray(26).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@NTrdID", dr.ItemArray(27).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@Acct", dr.ItemArray(28).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@ExchTime", dr.ItemArray(29).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchDate", dr.ItemArray(30).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TimeSent", dr.ItemArray(31).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@TimeProcessed", dr.ItemArray(32).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@PA", dr.ItemArray(33).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@OrderNo", dr.ItemArray(34).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TTOrderKey", dr.ItemArray(35).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@IP", dr.ItemArray(36).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@FFT3", dr.ItemArray(37).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@FFT2", dr.ItemArray(38).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@SubmitTime", dr.ItemArray(39).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@SubmitDate", dr.ItemArray(40).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@TransID", dr.ItemArray(41).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@SessionID", dr.ItemArray(42).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@SeriesKey", dr.ItemArray(43).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@ExchangeOrderID", dr.ItemArray(44).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@Destination", dr.ItemArray(45).ToString()))
sqlServerCommand.Parameters.Add(New SqlParameter("@FlowDeliveryUnit", (dr.ItemArray(46))))sqlServerCommand.Parameters.Add(New SqlParameter("@TimeReceived", dr.ItemArray(47).ToString()))sqlServerCommand.Parameters.Add(New SqlParameter("@CallbackReceived", dr.ItemArray(48).ToString()))
sqlServerCommand.ExecuteNonQuery()Next
sqlServerConn.Close()
objConn.Close()
End Sub
Thanks for eveones input in advance.
View 10 Replies
View Related
Jul 20, 2005
here's my code:my $sth = $dbhSQL->prepare('{call proc(?,?,?)}');$sth->bind_param(1,"asd");$sth->bind_param(2,"klm");$sth->bind_param_inout(3,$no_go, 1000);$sth->execute;print "no go = $no_go";while(my @row=$sth->fetchrow_array){print "@row";}$sth->finish;Here's my stored procedure:CREATE PROCEDURE proc@id varchar(50),@iyt varchar(20),@no_go int OUTPUTASSET NOCOUNT ONDECLARE @id_err int,@ans_glue_err intBEGIN TRANSACTIONSELECT user_id FROM myTableWHERE user_id=@id AND iyt=@iytSET @id_err = @@ERRORIF @@ROWCOUNT <> 0BEGINSELECT date,date_mod FROM ans_glueWHERE user_id=@idSET @no_go = 0SET @ans_glue_err=@@ERRORENDELSEBEGINSET @no_go = 1ENDIF @id_err = 0 AND @ans_glue_err = 0BEGINCOMMIT TRANSACTIONENDELSEBEGINROLLBACK TRANSACTIONENDthe procedure runs perfectly in Cold Fusion, returning both recordsetsand output param, but in perl, it won't print the output param and Idon't know how to access the second recordsetHELP!
View 1 Replies
View Related
Jan 28, 2007
hi
i read that stored procedures can return multiple result sets?how is that?
thanks in advance.
View 4 Replies
View Related
Sep 12, 2006
Hi,Is there a way I can change schema name on tables and stored procedures? How do I do this?I´m very news to SQL and .netThanks
View 1 Replies
View Related
Dec 20, 2007
Can a SqlDataSource or a TableAdapter be attached to a stored procedure that returns a temporary table? I am using Sql Server 2000.
The SqlDataSource is created with the wizard and tests okay but 2.0 controls will not bind to it.
The TableAdapter wizard says 'Invalid object name' and displayes the name of the temporary table.ALTER PROCEDURE dbo.QualityControl_Audit_Item_InfractionPercentageReport
@AuditTypeName varchar(50), @PlantId int = NULL,
@BuildingId int = NULL, @AreaId int = NULL,
@WorkCellId int = NULL, @WorkShift int = NULL,
@StartDate datetime = NULL, @EndDate datetime = NULL,
@debug bit = 0 AS
CREATE TABLE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable (ItemHeader varchar(100), Item varchar(250), HeaderSequence int, ItemSequence int, MajorInfractionPercent money, MinorInfractionPercent money)
DECLARE @sql nvarchar(4000), @paramlist nvarchar(4000)
SELECT @sql = '
INSERT INTO #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
(ItemHeader, Item, HeaderSequence, ItemSequence, MajorInfractionPercent, MinorInfractionPercent)
SELECT DISTINCT QualityControl_Audit_Item.Header,
QualityControl_Audit_Item.AuditItem,
QualityControl_Audit_Item.HeaderSequence,
QualityControl_Audit_Item.AuditItemSequence,
NULL, NULL
FROM QualityControl_Audit INNER JOIN
QualityControl_Audit_Item ON QualityControl_Audit.QualityControl_Audit_Id = QualityControl_Audit_Item.QualityControl_Audit_Id
WHERE (QualityControl_Audit.AuditType = @xAuditTypeName)'
IF @PlantId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.PlantId = @xPlantId'
IF @BuildingId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.BuildingId = @xBuildingId'
IF @AreaId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.AreaId = @xAreaId'
IF @WorkCellId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.WorkCellId = @xWorkCellId'
IF @WorkShift IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.WorkShift = @xWorkShift'
IF @StartDate IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.DateAuditPerformed >= @xStartDate'
IF @EndDate IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.DateAuditPerformed <= @xEndDate'SELECT @sql = @sql + '
ORDER BY QualityControl_Audit_Item.HeaderSequence, QualityControl_Audit_Item.AuditItemSequence'
IF @debug = 1 PRINT @sqlSELECT @paramlist = '@xAuditTypeName varchar(50), @xPlantId int, @xBuildingId int, @xAreaId int, @xWorkCellId int,
@xWorkShift int, @xStartDate datetime, @xEndDate datetime'
EXEC sp_executesql @sql, @paramlist, @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDateDECLARE my_cursor CURSOR FOR
SELECT ItemHeader, Item, MajorInfractionPercent, MinorInfractionPercent FROM #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
OPEN my_cursor
--Perform the first fetchDECLARE @ItemHeader varchar(100), @Item varchar(250), @MajorInfractionPercent money, @MinorInfractionPercent money
FETCH NEXT FROM my_cursor INTO @ItemHeader, @Item, @MajorInfractionPercent, @MinorInfractionPercent
--Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
--Major
EXEC dbo.QualityControl_Audit_Item_InfractionPercentageReport_CalculateForMajorOrMinor @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDate, @ItemHeader, @Item, 'Major', @debug, @InfractionPercent = @MajorInfractionPercent OUTPUTUPDATE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
SET MajorInfractionPercent = @MajorInfractionPercentWHERE (((ItemHeader IS NULL) AND (@ItemHeader IS NULL) OR (ItemHeader = @ItemHeader)) AND (Item = @Item))
--Minor
EXEC dbo.QualityControl_Audit_Item_InfractionPercentageReport_CalculateForMajorOrMinor @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDate, @ItemHeader, @Item, 'Minor', @debug, @InfractionPercent = @MinorInfractionPercent OUTPUTUPDATE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
SET MinorInfractionPercent = @MinorInfractionPercentWHERE (((ItemHeader IS NULL) AND (@ItemHeader IS NULL) OR (ItemHeader = @ItemHeader)) AND (Item = @Item))
FETCH NEXT FROM my_cursor INTO @ItemHeader, @Item, @MajorInfractionPercent, @MinorInfractionPercent
END
CLOSE my_cursor
DEALLOCATE my_cursor
SELECT * FROM #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
View 8 Replies
View Related
