Stored Procedure Never Ends

Feb 28, 2008

Hi,


I have strange situation with one stored procedure on MS SQL Server 2000, sp3:
- It's some old procedure that worked well for several years
- It still works at other locations (even on MS SQL Server 7)
- Now sometimes this procedure just stops working over ODBC and OLE-DB connection. From Query Analyzer it works always ok! Over ODBC looks like client doesn't receive information, that procedure has completed.


I put some insert at the end of the procedure (for debbuging): procedure executes insert (it's the last statement in procedure), I can select inserted values from table, but client just doesn't get answer from server. I looked all processes at SQL Server and none of them is blocked, there are no locks that prevents procedure execution,...


I found out that recreating procedure makes it working again (for all clients). Well, at least for few days or even weeks.


Any ideas?


Thx!
Borut

View 12 Replies


ADVERTISEMENT

Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)

Nov 1, 2007

Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly.  For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') 
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). 
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
 

View 1 Replies View Related

Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?

Mar 3, 2008

Hi all,

I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):

(1) /////--spTopSixAnalytes.sql--///

USE ssmsExpressDB

GO

CREATE Procedure [dbo].[spTopSixAnalytes]

AS

SET ROWCOUNT 6

SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName

FROM LabTests

ORDER BY LabTests.Result DESC

GO


(2) /////--spTopSixAnalytesEXEC.sql--//////////////


USE ssmsExpressDB

GO
EXEC spTopSixAnalytes
GO

I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")

Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)

sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure

'Pass the name of the DataSet through the overloaded contructor

'of the DataSet class.

Dim dataSet As DataSet ("ssmsExpressDB")

sqlConnection.Open()

sqlDataAdapter.Fill(DataSet)

sqlConnection.Close()

End Sub

End Class
///////////////////////////////////////////////////////////////////////////////////////////

I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)

Please help and advise.

Thanks in advance,
Scott Chang

More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.




View 11 Replies View Related

WHILE Statement Never Ends

Sep 25, 2006

Why does this query never ends??

Seems that parameter @Sucursales is always the same number. When the query loops in the while statement does it set @Sucursales to the result in the select statement (in red)? Or continue looping from the while statement?

DECLARE @Sucursales INT

SET @Sucursales = (SELECT COUNT(*) FROM CatSucursales)

BEGIN

WHILE @Sucursales > 0

INSERT INTO Compras(Fecha,NumOC,CveProveedor,Importe,CveDepartamento)

SELECT

Fecha,

NumOC,

CveProveedor,

CONVERT(money,SUM(Cantidad * Costo)) AS Importe,

CD.CveDepartamento

FROM

ComprasDetalle CD

INNER JOIN

( SELECT

CveProveedor,

Nombre,

CveDepartamento

FROM

CatProveedores CP

INNER JOIN CatDepartamentos CD ON

CP.CveSucursal = CD.CveSucursal

WHERE

CP.CveSucursal = @Sucursales

)VirCP ON

CD.Proveedor = VirCP.Nombre

AND CD.CveDepartamento = VirCP.CveDepartamento

WHERE

Fecha = DATEADD(dd, DATEDIFF(dd, 0, GETDATE())+0, -1)

GROUP BY Fecha, NumOC, CveProveedor, Nombre, CD.CveDepartamento

SET @Sucursales = @Sucursales - 1

END

View 6 Replies View Related

Query Never Ends Execution

Apr 16, 2007

Hello

I have a .Net application that calls an stored procedure. When it does, the execution goes and never ends (I have to kill the windows process). When I call the sp from within the Management Studio, it also never ends executing and I have to cancel the query. But, when I call it immediately after, it takes 45 seconds to complete.

Now, the sp has several parts and I have made that it prints a message at the end of each part so that I can read where it stops. Strange enough, it completes all parts except the last one, which has the form INSERT INTO myLocalTable SELECT * FROM MyRemoteTable. But if I execute the Select independetly, I discover that it brings no rows! Now, many of the @@rowcount printed after the execution of the other parts shows zero rows involved or just a few. I am not using cursors, each part is an UPDATE statement or an INSERT.

TestMachine1 runs SQL2005 SP2 and has as linked server myRemoteServer (SQL2000) server. The stored procedure in TestMachine1 inserts rows to a table in myRemoteServer and brings back some rows.

What could be wrong?

View 3 Replies View Related

Job Ends Successfully Even When It's Not True

Apr 23, 2008

Hi,
we've got this problem with some particular jobs: they look as they
ran correctly, but actually they didn't made it all through their
duties.
The problem is that this job is calling a sequence of DTS, where there
is a DTS with an ActiveX control which modifies another DTS before
launching and some other tasks: the error happens there, .
Launched from the DTS we get the error, from the job no...any idea how
we could get the correct job information?
Thank you
Daniele

View 5 Replies View Related

T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure

Nov 14, 2014

I am new to work on Sql server,

I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.

Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.

View 1 Replies View Related

SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?

Jan 29, 2015

I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?

CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],

[Code] ....

View 9 Replies View Related

Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.

Sep 19, 2006

I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.

How do I do that? Articles, code samples, etc???

View 1 Replies View Related

Linked Server Query Never Ends

Apr 25, 2001

I have a delete query on a linked server that never ends. I can do a select where ID = x and it returns lickity split but when I do a delete where id = x it never comes back? Any Clues???

View 1 Replies View Related

Cube Back Up Ends In Error

Aug 27, 2007

Hi all,

I have back up job that runs to back up Cube daily but lately it is failing and gives error bellow:

The operation has been cancelled. at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForSoapFault(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForError(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessage(Boolean endReceivalIfException, Boolean readSession, Boolean readNamespaceCompatibility) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessageAndReturnResult(String& result, Boolean skipResult) at Microsoft.AnalysisServices.Xmla.XmlaClient.Execute(String command, String properties, String& result, Boolean skipResult, Boolean propertiesXmlIsComplete) at Microsoft.SqlServer.Management.Smo.Olap.SoapClient.ExecuteStatement(String stmt, StatementType stmtType, Boolean withResults, String properties, String parameters, Boolean restrictionListElement, String discoverType, String catalog) at Mi. The step failed.

But if i run that job manually it runs fine(successfully)

What could be the problem!!

thanks

View 1 Replies View Related

Subscription Persists After Application Ends

Dec 19, 2007


I have a question about how Query Notification works and the objects and data created when a new subscription is created.

Here is what we are doing:

- When the application starts, we call the SqlDependency start method:

SqlDependency.Start( <connection string> )

- For each query we want to monitor, we run the following:

SqlConnection oConnection = new SqlConnection( <connection string> );
oConnection.Open();
SqlCommand oCommand = new SqlCommand( <sql statement> , oConnection);
SqlDependency oDependency = new SqlDependency(oCommand);
oDependency.OnChange += new OnChangeEventHandler( <handler delegate> );
SqlDataReader objReader = oCommand.ExecuteReader();
objReader.Close();

- When the application shuts down, we call the SqlDependency stop method:

SqlDependency.Stop( <connection string> )


We have observed that when we create a new subscription, the following things happen:
1. A row is added to sys.DM_QN_Subscriptions.
2. query_notification_% internal table is created.
3. SQLQueryNotificationStoredProcedure% stored procedure is created.
4. SQLQueryNotificationService% Service Queue is created.
5. queue_messages% internal table is created.

When the application ends, the stored procedure, service queue and queue messages internal table are dropped. The row in sys.DM_QN_Subscriptions and the query_notification_% persist.

When the application is restarted, a new row is added to sys.DM_QN_Subscriptions, but the existing query_notification_% internal table is used.

Is this normal behavior? Or, is there something we should be doing to clean up?

What I am wondering is if there is a threshold where these persistent items become a problem with locking, performance, other?

View 1 Replies View Related

DTS SQL Server 2005 Package Never Ends

May 22, 2008

I now support a SQL Server "master" wrapper package that runs several other packages that simply never ends. When I run it in Visual Studio all the tasks complete, but the status stays running. I'm am trying to get this package to run via TWS/OPC and it doesn't end there either.

Does anyone know what the problem is? Has anyone heard of this?

Thanks,
Jim

View 5 Replies View Related

Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page

Dec 28, 2005

I have a sub that passes values from my form to my stored procedure.  The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page.  Here's where I'm stuck:    Public Sub InsertOrder()        Conn.Open()        cmd = New SqlCommand("Add_NewOrder", Conn)        cmd.CommandType = CommandType.StoredProcedure        ' pass customer info to stored proc        cmd.Parameters.Add("@FirstName", txtFName.Text)        cmd.Parameters.Add("@LastName", txtLName.Text)        cmd.Parameters.Add("@AddressLine1", txtStreet.Text)        cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue)        cmd.Parameters.Add("@Zip", intZip.Text)        cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text)        cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text)        cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text)        cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text)        cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text)        ' pass order info to stored proc        cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue)        cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue)        cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue)        'Session.Add("FirstName", txtFName.Text)        cmd.ExecuteNonQuery()        cmd = New SqlCommand("Add_EntreeItems", Conn)        cmd.CommandType = CommandType.StoredProcedure        cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc)   <-------------------------        Dim li As ListItem        Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar)        For Each li In chbxl_entrees.Items            If li.Selected Then                p.Value = li.Value                cmd.ExecuteNonQuery()            End If        Next        Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder)  and pass that to my second stored procedure (Add_EntreeItems)

View 9 Replies View Related

SQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?

Sep 26, 2014

I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure

at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT

I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT

View 3 Replies View Related

Loading Data At Both Ends Of A Merge Replication?

Feb 9, 2007

Hi gang,

We have a database that's using merge replication between two servers, and we need to insert a lot (about 1GB) of data into it.

The servers, however, are separated by a 192k WAN connection, so it's impractical to rely on the merge replication to send the data across to the subscriber.

Is there a way to insert the data at both ends? I can get the data out there on a DVD or a laptop easily enough. Can I load the data into both copies of the database and tell the merge agent that it's not to be replicated?

Thanks,
Matt

View 3 Replies View Related

How Do I Find Out When A Data Driven Subscription Ends?

Oct 10, 2007



Hello everybody,

I have a problem concerning the execution status of a data driven subscription. The problem is that
I“m creating a datamart and rendering several thousands of pdf based reports after that. I“ve found out how
to start the subscription using stored procedures with DTS.

Now I want to take further actions after the report building is done. But how do I find that out?

tfr
LG

View 3 Replies View Related

Full Text Search - Ends With Option

Aug 14, 2007

I am implementing full text serach option in my project.
Its working fine for Begins with ("Text*")
Contains("Text")

But I am not able get the results for ends with ("*Text")


SELECT * FROM CATALOGUE_INDEX WHERE CONTAINS(SHORT_DESCRIPTION,'*OCK')


Now I am expecting the rows which are having "Stock" as value in short_desciption column.

But I am not getting the result.

Please advise me on how to do the same

Regards

Muralimohan


View 1 Replies View Related

Package Fails But Single Task Ends With Success

Nov 8, 2006

Hi

I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.

The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.

Any help welcome.

View 4 Replies View Related

System Stored Procedure Call From Within My Database Stored Procedure

Mar 28, 2007

I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.

How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?

Thanks in advance

View 9 Replies View Related

Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure

Jan 23, 2008



Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio

What could explain this?

Obviously,

All three scenarios are executed against the same database and hit the exact same tables and indices.

Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).

The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes

View 1 Replies View Related

Accessing ConnectionString From ConnectionManager In A Script Task Ends With Login Failed! WHY!!

Feb 8, 2007

So in a script task for one of my packages I have a connection manager to an dtsConfig OLE DB.

This is the code

Dim ConnectionString As String = Dts.Connections("db_stage").ConnectionString
Dim sqlConnection As SqlConnection = New SqlConnection(ConnectionString )

I get a login failed for
user...But if I hardcode the connectionString, including the password this works.

1) Why is it that the ConnectionString from the connection manager omits this password?
2) Since this is an OLE DB, is there anyway to set the Data Source Designer to omit the "Provider=ABCDED.1" section?

Thanks!
Tony

View 5 Replies View Related

SQL 2012 :: AlwaysOn Availability Group Replica Ends Up With User Account As Owner

Sep 5, 2014

Setting up a test AlwaysOn Availability Group for one database.

However, whenever I restore the database to the replica server and join it, it ends up with my user account as the owner of the database.

Obviously I do not want a user account as the database owner, but since it is read-only I cannot modify it directly. If I were able to fail the AG over to the replica, I could change the owner then, but I cannot due to business requirements. this AG is to essentially serve as a replacement to log shipping.

I tried doing the backups and restores using EXECUTE AS login = 'sa', and yet it still shows up as my user account.

View 2 Replies View Related

Transact SQL :: Sending Auto Email With Queried Data (On INSERT And On Month Ends)

Oct 22, 2015

I have to send updated Employee list from employee master table to a particular email ID on every last date of Month and when a new employee is added / deleted / edited.Ā Also need to send this as an Excel fileĀ 

I tried the following but "Invalid Object name dbo.tbl_EmployeeMaster" error coming while inserting a new employee.

USE [eXact]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[trg_Email]

[Code] ....

View 8 Replies View Related

User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net

Sep 13, 2007

Hi all,



I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.



Whenever I tried to right click stored procedure and select step into store procedure> i get following error



"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"



I am not sure what needs to be done on sql server side



We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.

Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?



Please advise..

Thank You

View 3 Replies View Related

Is The Transaction Context Available Within A 'called' Stored Procedure For A Transaction That Was Started In Parent Stored Procedure?

Mar 31, 2008

I have  a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
 Any help on this would be appreciated.

View 1 Replies View Related

Calling Stored Procedure Fromanother Stored Procedure

Oct 10, 2006

Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames

View 16 Replies View Related

Use Resultset Returned From A Stored Procedure In Another Stored Procedure

Nov 15, 2006

I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
 Thanks,
Kevin

View 3 Replies View Related

SQL Stored Procedure Issue - Search Stored Procedure

May 18, 2007

This is the Stored Procedure below -> 
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object:  Stored Procedure dbo.BPI_SearchArchivedBatches    Script Date: 4/2/2007 4:52:19 PM ******/
 
CREATE  PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
 
IF (@i_WildCardFlag=0)BEGIN
 SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN   BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND  ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT       Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count,   Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By,   Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status,   Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status,  Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails,   BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType  FROM           Batch  INNER JOIN  BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE  ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND  ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND  ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <=  @V_ToDateTime )) AND  Batch.Archived_Status = 1 '
 if (@V_BatchStatus IS not null) begin  set @SQLString=@SQLString + ' AND   (Batch.Status_Code in ('+@V_BatchStatus+'))' end
 if (@V_BatchType IS not null) begin  set @SQLString=@SQLString + ' AND   (BatchTemplate.Batch_Type  in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
 
 
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
 
Please help me regarding the same.
 
Thanks in advance.
 
Sandeep Kumar
 

View 2 Replies View Related

Sql Count Using Stored Procedure Withing Stored Procedure

Apr 29, 2008

I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks

View 10 Replies View Related

Exec Twp Stored Procedure In A Main Stored Procedure

Apr 29, 2004

Hi there

i have a stored procedure like this:

CREATE PROCEDURE SP_Main

AS
SET NOCOUNT ON

BEGIN TRANSACTION

exec SP_Sub_One output

exec SP_Sub_Two output


IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran

return
GO


now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.

now i can put the "begin transation" in the two sub stored procedure's. The problem is

what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"

now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data

how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.

Thanks in advance

Mahmoud Manasrah

View 1 Replies View Related

Calling A Stored Procedure Or Function From Another Stored Procedure

Mar 2, 2007

Hello people,

When I am trying to call a function I made from a stored procedure of my creation as well I am getting:

Running [dbo].[DeleteSetByTime].

Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.

No rows affected.

(0 row(s) returned)

@RETURN_VALUE =

Finished running [dbo].[DeleteSetByTime].

This is my function:

ALTER FUNCTION dbo.TTLValue

(

)

RETURNS TABLE

AS

RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'

This is my stored procedure:

ALTER PROCEDURE dbo.DeleteSetByTime

AS

BEGIN



SET NOCOUNT ON



DECLARE @TTL int

SET @TTL = dbo.TTLValue()



DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)

END

CreatedTime is a datetime column and TTL is an integer column.

I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.

Your help is much appreciated.

View 6 Replies View Related

Execute Stored Procedure From Stored Procedure With Parameters

May 16, 2008

Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY

CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC

Any assistance would be greatly appreciated.
Thank you,
Dave

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved