Stored Procedure That Will Only Run In Query Analyzer.
Jul 28, 2004
Hi all,
I have a problem with a stored procedure that executes properly when running it in Query Analyzer. When I call the SP from an ASP.NET application, it doesn't seem to run properly. I have verified that the parameter values are correct, but there is one update command that does not update any rows when it executes although it should. I tried stepping through the SP from within Visual Studio and it still does not work properly even though all parameters have the correct values.
Why would a SP execute properly when used in QA but not when an application executes it?
View 4 Replies
ADVERTISEMENT
Jan 12, 2007
For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
View 2 Replies
View Related
Apr 17, 2001
I am trying to see if there is anyway to BCP a stored procedure from SQL query analyzer. The statement works fine from the command prompt or from within DTS but not from SQL QA.
The bcp statement is as follows:
master..xp_cmdshell "bcp "exec pubs.dbo.sp_employee" queryout dev01e$emp.txt /c /o dev01e$emp.out /T /SDEV01"
sp_employee has the script:
SELECT * FROM EMPLOYEE
Any help is appreciated. Thanks.
AJ
View 2 Replies
View Related
Jun 3, 2007
I am trying to execute a stored procedure in Query anaylzer for SQL server 2005. I am not sure I am doing it correctly though, because I am getting an error message. Here is the command I am typing:
execute DetaHistoryGet(84,885,34,"EndDate")
Here is the error message I get:
Msg 102,Level 15, State 1, Line 1
Incorrect syntax near '84'
Here are a few lines from the stored procedure. I have not included it all here.
CREATE PROCEDURE [dbo].[DetaHistoryGet]
( @MarketId decimal, @OwnerId decimal, @QuarterId decimal, @SortExp nvarchar(50) )
AS SET NOCOUNT ON
View 3 Replies
View Related
Jul 20, 2005
hi ng,i am newbie to sqlserver and my problem seems simple, but i didn't findinformation about it:How can i display theRETURN @xvalue of a stored procedure in the sql analyzer of the sqlserver?thanks a lot,d
View 2 Replies
View Related
Feb 21, 2002
HI,
I have an interesting situation. I have created a stored procedure which has a select union query and it accepts some parameters. When I execute this procedure it takes 8 minutes. When I copy the script in stored procedure and run it directly in Query Analyzer it takes 2 1/2 minutes?? Same numbers of rows are returned either way in the result set with about 13,000.
I cannot figure this out and it is almost the same thing except that in Query Analyzer I declare the parameters variables and its values?
Any feedback would be appreciated!
Thanks in advance...
View 2 Replies
View Related
Jun 13, 2007
Hi. I am having a problem using DTSRun in a stored procedure or in query analyzer.
My DTS package truncates a table and then imports data from an Excel spreadsheet into the table.
The DTS package runs fine if I run it manually on Enterprise Manager or if I use DTSRun in a command prompt.
However when I try to run the package in a stored procedure or in query analyzer as follows:
ie Exec master..xp_cmdshell 'DTSRUN /SSQL SERVER /NPackageName /Uuserid /Ppassword'
The package does not return an error but it does not actually import any data from the Excel spreadsheet. It is able to truncate the table without any problem.
I've tried all kinds of combination of using Windows user id that I know has access to the excel file instead of a sql login.
I've run Filemon on the excel file and it seems like DTS is not accessing the file when I use the stored proc or query analyzer method.
If anyone could shed any light on this I would be most grateful. Thanks.
View 4 Replies
View Related
Jul 20, 2005
Hi group,I have a select statement that if run against a 1 million recorddatabase directly in query analyzer takes less than 1 second.However, if I execute the select statement in a stored procedureinstead, calling the stored proc from query analyzer, then it takes12-17 seconds.Here is what I execute in Query Analyzer when bypassing the storedprocedure:USE VerizonGODECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'SELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOHere is what I execute in Query Analyzer when calling the storedprocedure:DECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'EXEC Verizon.dbo.baddebt_phonelookup @phonenumberHere is the script that created the stored procedure itself:CREATE PROCEDURE dbo.baddebt_phonelookup @phonenumber varchar(15)ASSELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOUsing SQL Profiler, I also have the execution trees for each of thesetwo different ways of running the same query.Here is the Execution tree when running the whole query in theanalyzer, bypassing the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Bookmark Lookup(BOOKMARK:([Bmk1000]),OBJECT:([Verizon].[dbo].[BadDebt]))|--Sort(DISTINCT ORDER BY:([Bmk1000] ASC))|--Concatenation|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Index]),SEEK:([BadDebt].[Telephone_Number]=[@phonenumber]) ORDERED FORWARD)|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Redef_Index]),SEEK:([BadDebt].[Telephone_Number_Redef]=[@phonenumber]) ORDEREDFORWARD)--------------------------------------Finally, here is the execution tree when calling the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Filter(WHERE:([BadDebt].[Telephone_Number]=[@phonenumber] OR[BadDebt].[Telephone_Number_Redef]=[@phonenumber]))|--Compute Scalar(DEFINE:([BadDebt].[Telephone_Number_Redef]=substring(Convert([BadDebt].[Telephone_Number]),1, 10)))|--Table Scan(OBJECT:([Verizon].[dbo].[BadDebt]))--------------------------------------Thanks for any help on my path to optimizing this query for ourproduction environment.Regards,Warren WrightScorex Development Team
View 5 Replies
View Related
Mar 7, 2008
Hi i have a script works in sql query analyzer;
declare @id decimal
declare mycur CURSOR SCROLL for select myRowID from myTable order by myRowID
open mycur;
Fetch ABSOLUTE 30 from mycur into @id
close mycur;
deallocate mycur;
select @id
this script turns me a value.
i create a stored procedure from above script and its syntax is ok;
CREATE PROCEDURE SELECT_MyRow
AS
declare @cur cursor
declare @RowID decimal
set @cur = CURSOR SCROLL
for select myRowID from myTable order by myRowID
open @cur
Fetch ABSOLUTE 30 from @cur into @RowID
close @cur
deallocate @cur
select @RowID
GO
my c# code using stored procedure is below;
Code Snippet
try
{
OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection);
cmd.CommandType = CommandType.StoredProcedure;
myconnection.Open();
OleDbDataReader reader = cmd.ExecuteReader();
MessageBox.Show(reader.GetName(0));//here fails
while (reader.Read())
{
MessageBox.Show(reader.GetDecimal(0).ToString());
}
reader.Close();
myconnection.Close();
}
catch(Exception ex)
{
MessageBox.Show(ex.Message);
}
The code above fails because reader reads no values, error message is "No data exists for the row/column"
but i know exists. Can anyone help me, what is the difference between stored procedure and script ?
View 4 Replies
View Related
Jul 23, 2005
Hi,Is there a way to align/indent the stored procedure script ( like VBAAdd-Ins Smart Indenter )Thanks, Eugene
View 2 Replies
View Related
Jul 20, 2004
I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:
CREATE PROCEDURE UserLogin
(
@Email nvarchar(100),
@Password nvarchar(50),
@UserName nvarchar(100) OUTPUT
)
AS
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
GO
If I run the query in Query Analyzer directly, I can display @UserName:
DECLARE @UserName as nvarchar(100)
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
Select @UserName
But how can I display @UserName if I call stored procedure:
exec UserLogin 'email', 'password', ''
I believed it return int, right?
Thanks in advance for help.
View 2 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
Oct 20, 2006
Hi All!
I know this must be a very silly question but, what is the PLSQL string I have to use to delete a stored procedure in a database? Essentially I have to remove a stored procedure that comes from a database backup every night because it belongs to a user and that user has to be recreated in the new SQL Server 2000. Simply put:
1. Production database comes into test database
2. Remove copy of stored procedure since it can not be set to dbo user because there is another copy with the same name that belongs to dbo.
3. Remove user
4. Add user (this one brings login name since the restored one didn't)
5. Have a nice day
I've got everything except removing the stored procedure so I will really appreciate the help.
Thank you all!
View 1 Replies
View Related
Aug 8, 2007
Hi,
In SQL 2000, to debug a stored proc I would launch QA, right click and hit debug.
How do I accomplish this with SQL 2005. I can't see that it came with QA.
Thank you,
Steve
View 1 Replies
View Related
Aug 15, 2007
Hi,
I apologize for the long post but I am trying to give as much information as I can about the steps I've taken to troubleshoot this.
We have a stored procedure that builds a sql statement and executes it using the Execute command. When I execute the stored procedure through query analyzer it takes close to 5 seconds to execute. When I print out the exact same statement and execute it directly in query analyzer as "raw sql", it takes 0.5 seconds - meaning it takes 10 times longer for the code to execute in the stored proc. I altered the stored proc to execute the printed sql instead of building but it still takes the full 5 seconds and there were no changes in the execution plan. This makes me confident that the issue is not caused by the dynamic sql. I've used with recompile to make sure that the stored procedure caches the most recent execution plan. When I compare the execution plans, the stored proc uses a nested loop whereas the raw sql statement uses a hash join. Seeing that, I added the hash hint to the stored proc and doing so brought down the execution time down from 5 secs to 2 secs but still the raw sql statement uses a clustered index whereas the stored proc uses a non-clustered index and that makes the statement 4 times slower. This proves how efficient clustered indexes are over non-clustered ones, but it doesn't help me since, as far as I know, I can't force SQL Server to use the clustered index.
Does anyone know why sql server is generating such an inefficient execution plan for the stored proc compared to the execution plan that it generates when executing the raw sql statement? The only thing I can think of is that some stats are not updated and that somehow throws off the stored proc. But then again, shouldn't it affect the raw sql statement?
Thank you,
Michael Tzoanos
View 4 Replies
View Related
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
View 1 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Jun 13, 2007
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies
View Related
Oct 30, 2015
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
View 0 Replies
View Related
Mar 25, 2008
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
View 4 Replies
View Related
Nov 23, 2004
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
View 8 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Aug 29, 2001
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
View 3 Replies
View Related
Feb 25, 2012
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
View 3 Replies
View Related
Apr 9, 2006
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies
View Related
May 23, 2007
Hello to all,
I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted.
but i excute it with the same parameters direct in Microsoft SQL Server Management Studio , It takes only under 1 second time
I don't know why?
Maybe can somebody help me?
thanks in million
best Regards
Pinsha
My Procedure Codes are here:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output )
AS
BEGIN
if ( @Level = 1)
begin
select @Path = convert(varchar(100),IDMember)
from wtcomValidRelationships
where wtcomValidRelationships.[IDMember]= @IDMember
and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0
end
if (@Level = 2)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0
end
if (@Level = 3)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0
end
if ( @Level = 4)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0
end
if (@Level = 5)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0
end
if (@Level = 6)
begin
select top 1 @Path = '' from wtcomValidRelationships
end
END
View 6 Replies
View Related
Sep 17, 2005
I am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies
View Related
Sep 25, 2006
Hi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
View 1 Replies
View Related
Jun 27, 2007
hey.. say i have a table with 4 columns, Id, col1, col2 & col 3the way it works is the id and one of the col's will have info, the other 2 cols will be emptyim trying to write a proc that returns the value of the column that has info + a number that is stored in a string to represent the column eg: CREATE PROCEDURE proc_Test @Id int, @Answer varchar(100) outputasset nocount on select @Answer = col1 +', 1'from myTablewhere Id= @Idif @@rowcount < 1select @Answer = col2 +', 2'from myTablewhere Id= @Idif @@rowcount < 1
select @Answer = col3 +', 3'
from myTable
where Id= @IdreturnGO but for some reason, it only process's the first select statment and if nothing is in the column, it returns - ', 1' cheers!!!
View 4 Replies
View Related
Apr 1, 2008
Hi,I am weak in writing stored procedure and want to learn it step by step.Now I have written a query and the requirement is such that I need to convert it in stored procedure.query:Select distinct empskill.tcatid,Coalesce(prm,0) as prm,coalesce(secn,0) as secn,a as technology,coalesce(skd,0) as skd,coalesce(knd,0) as knd,coalesce(tnd,0)as tnd,coalesce(dnd,0) as dnd from empskill RIGHT OUTER JOIN (select tcatid,Count(skilltypeid) AS prm from empskill where skilltypeid=1 group by tcatid) prms ON empskill.tcatid=prms.tcatid LEFT OUTER JOIN (select tcatid,Count(skilltypeid) AS secn from empskill where skilltypeid=2 group by tcatid) secs on empskill.tcatid=secs.tcatid RIGHT OUTER JOIN (select technology.category as a,empskill.tcatid from empskill,technology where empskill.tcatid=technology.tcatid group by empskill.tcatid,technology.category ) s ON empskill.tcatid=s.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS skd from empskill where skilllevelid=1 group by tcatid) skds on empskill.tcatid=skds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS knd from empskill where skilllevelid=2 group by tcatid) knds on empskill.tcatid=knds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS tnd from empskill where skilllevelid=3 group by tcatid) tnds on empskill.tcatid=tnds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS dnd from empskill where skilllevelid=4 group by tcatid) dnds on empskill.tcatid=dnds.tcatid union select top 1 500 as tcatid,'' as prm,'' as sec,'more' as technology,'' as skd,'' as knd,'' as tnd,'' as dnd from empskill Can you please explain step by step how to convert this to stored procedure.Thanks a lot
View 3 Replies
View Related
Nov 16, 1999
In access, I can create a function that I can call in a query. It runs that function iteratively. Do I have the same ability with SQL server? Can I call a stored procedure WITHIN a query? I would like to be able to do something like:
Insert into tblOrders(spFirst_Name) Select {Call spUpperLower(tblClients.First_Name)} from tblClients Where ...
So basically, spUpperLower would run on every First Name Row in the result set.
Any help would be much appreciated.
Thanks,
Brad
View 3 Replies
View Related
Oct 2, 2001
I want to run a stored procedure from a query...
can I do this? Thanks!
CREATE VIEW dbo.V_EmploymentTerminationsResignations
AS
--the next 3 lines produce errors...
declare @StartDate datetime
declare @EndDate datetime
exec [hrs2].[dbo].[sp_getquarterinfo] --@StartDate OUTPUT, @EndDate OUTPUT
--they're designed to replace the hard coded stuff in the WHERE statement...
--a snippet of the originl view...
SELECT TOP 100 PERCENT dbo.Employee.OrgID, dbo.Employee.SSN, dbo.Employee.EMPLOYEE_NAME, , dbo.Employee.SPECIAL_STATUS,
WHERE ...
(dbo.Employee.LAST_PERS_ACTN_DATE BETWEEN CONVERT(DATETIME, '2001-07-01 00:00:00', 102) AND CONVERT(DATETIME, '2001-10-01 00:00:00', 102))
ORDER BY dbo.Employee.LAST_PERS_...
View 1 Replies
View Related
Oct 22, 2007
Hi,
I have created an SQL query which returns the expected data. However, when I try to run it as a stored procedure, I get no rows returned.
(I assume I running the procedure correctly e.g. exec getNonDeployed RCN20047)
Code:
CREATE PROCEDURE getNonDeployed
@packageID text
AS
BEGIN
DECLARE @CollectionID VARCHAR(10)
DECLARE @Collections TABLE (CollectionID VARCHAR(10))
set @CollectionID = (SELECT
CollectionID
from ProgramOffers
where OfferID='@packageID');
WITH CollectionFull (SubCollectionID) AS
(
-- Create the anchor query. This establishes the starting
-- point
SELECT
SubCollectionID
from v_CollectToSubCollect a
where a.SubCollectionID=@CollectionID
UNION ALL
-- Create the recursive query. This query will be executed
-- until it returns no more rows
select
a.SubCollectionID
from v_CollectToSubCollect a
inner join CollectionFull b on b.SubCollectionID=a.ParentCollectionID
)
Insert Into @Collections
SELECT * FROM CollectionFull
select a.RuleName AS MACHINENAME, c.IPAddress0 as IPADDRESS
from v_CollectionRuleDirect a
inner join @Collections b on b.CollectionID=a.CollectionID
inner join v_GS_DEVICE_NETWORK c on c.ResourceID=a.ResourceID
where RuleName not in (select distinct a.MachineName as MACHINENAME
from v_StatusMessage a, v_StatMsgAttributes b, v_CollectionRuleDirect c, v_GS_DEVICE_NETWORK d, v_Collection e
where (a.RecordID=b.RecordID AND a.MachineName=c.RuleName and c.ResourceID=d.ResourceID and c.CollectionID=e.CollectionID)
AND b.AttributeValue IN ('@packageID'))
END
View 1 Replies
View Related
