Hi. I'm trying to write a stored procedure that will access another database on a different server. How can I set this up in a stored procedure? It is a SQL Server 2000 database and it will be using SQL server authentication. Thanks!
View 3 RepliesHi all,
I have an urgent problem. Can a stored procedure create a connection or access data from another database?
Thanks in advace. :)
Hi
I have created a .net application using visual studio .net and sql server destop edition on my pc. I have exported the database tables and stored procedures and imported them into a Sql Server database on a web hosting service. The web host does not allow me to access this database directly through visual studio .net.
My connection string to the external database works ok and I can access my stored procedures through my web pages. I know they accept parameters and that I can receive Return Values from them. However, whenever I try to access any of the tables on the external database through a stored procedure, I get a sqlException saying that the table cannot be found (Invalid object name 'UserList').
I have created a text type command which selects data from one of the tables and this runs through without any errors. I have also managed to Insert a row onto one of the external tables also by using a text type command. My only problem seems to be with commands using stored procedures.
Just in case this is the problem - the owner of the table/procedures on my desktop is shown as dbo but on the external database the owner of the tables is shown as [domainname].co.uk_dbuser while the stored procedures owner is still dbo.
Example of stored procedure on external database:
/****** Object: Stored Procedure dbo.AddUser Script Date: 01/03/2005 21:10:06 ******/
CREATE PROCEDURE dbo.AddUser
(
@Username Varchar(20),
@Password Varchar(20)
)
AS
(
Select User_ID From UserList
Where User_Username = @Username
)
GO
Have tried changing dbo.AddUser to [domain].co.uk_dbuser.Adduser but this would not save because there were too many full-stops!
Any help would be greatly appreciated as I am completely stuck.
John
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports System.Data.OleDb
Imports System.Configuration
Imports System.Text
Imports System.Collections
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub StoredProcedureTest(ByVal strAS400ServerName As String, _
ByVal strCompany As String, _
ByVal decSerial As Decimal, _
ByVal strSerialCode As String, _
ByVal strSerialScan As String, _
ByVal decMasterSerialNumber As Decimal, _
ByVal strCustomerPart As String, _
ByVal strTakataPart As String, _
ByVal strCustomerRanNo As String, _
ByVal strCustomerAbv As String, _
ByVal strDestinationAbv As String, _
ByVal decQty As Decimal, _
ByVal strCreatDate As String, _
ByVal decVoidSerialNo As Decimal, _
ByVal strProductionLineNo As String, _
ByVal strProcType As String)
Dim sp As SqlPipe = SqlContext.Pipe
Dim strResult As Integer = 0
Dim strErrorText As String = String.Empty
Dim dsData As New DataSet
Dim parameter(15) As OleDbParameter
If Not strAS400ServerName Is Nothing And strAS400ServerName <> String.Empty Then
' Populate parameter collection
parameter(0) = (CreateParameter("PARM1", OleDbType.Char, 20, ParameterDirection.InputOutput, strAS400ServerName))
parameter(1) = (CreateParameter("PARM2", OleDbType.Char, 2, ParameterDirection.InputOutput, strCompany))
parameter(2) = (CreateParameter("PARM3", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decSerial))
parameter(3) = (CreateParameter("PARM4", OleDbType.Char, 2, ParameterDirection.InputOutput, strSerialCode))
parameter(4) = (CreateParameter("PARM5", OleDbType.Char, 25, ParameterDirection.InputOutput, strSerialScan))
parameter(5) = (CreateParameter("PARM6", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decMasterSerialNumber))
parameter(6) = (CreateParameter("PARM7", OleDbType.Char, 30, ParameterDirection.InputOutput, strCustomerPart))
parameter(7) = (CreateParameter("PARM8", OleDbType.Char, 15, ParameterDirection.InputOutput, strTakataPart))
parameter(8) = (CreateParameter("PARM9", OleDbType.Char, 15, ParameterDirection.InputOutput, strCustomerRanNo))
parameter(9) = (CreateParameter("PARM10", OleDbType.Char, 6, ParameterDirection.InputOutput, strCustomerAbv))
parameter(10) = (CreateParameter("PARM11", OleDbType.Char, 6, ParameterDirection.InputOutput, strDestinationAbv))
parameter(11) = (CreateParameter("PARM12", OleDbType.Decimal, 9, ParameterDirection.InputOutput, decQty))
parameter(12) = (CreateParameter("PARM13", OleDbType.Char, 10, ParameterDirection.InputOutput, strCreatDate))
parameter(13) = (CreateParameter("PARM14", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decVoidSerialNo))
parameter(14) = (CreateParameter("PARM15", OleDbType.Char, 3, ParameterDirection.InputOutput, strProductionLineNo))
parameter(15) = (CreateParameter("PARM16", OleDbType.Char, 2, ParameterDirection.InputOutput, strProcType))
RunDB2Sp("FABLE.MAP", parameter, dsData)
If dsData.Tables.Count > 0 Then
dsData.Tables(0).TableName = "Supreeth"
Dim bitresult As String = dsData.Tables(0).Rows(0)(0).ToString()
Dim errorstring As String = dsData.Tables(0).Rows(0)(1).ToString()
' I am not sure here
SqlContext.Pipe.Send(bitresult)
SqlContext.Pipe.Send("No errors")
End If
Else
Throw New ArgumentException("AS400Db.GetAS400TraceabilityResult: AS400 server name is empty or invalid")
End If
End Sub
Public Shared Sub RunDB2Sp(ByVal strProcedure As String, ByRef parms As OleDbParameter(), ByRef dsData As DataSet)
'*********************************************
' Declare Variables
'*********************************************
Dim daAdaptor As OleDbDataAdapter
Dim cmdAS400 As OleDbCommand
'Dim dstestMe As New DataSet
Try
cmdAS400 = CreateCommand(strProcedure, parms)
daAdaptor = New OleDbDataAdapter(cmdAS400)
' Fill the Data Set
daAdaptor.Fill(dsData)
Catch expError As OleDbException
daAdaptor = Nothing
Finally
daAdaptor = Nothing
cmdAS400.Dispose()
'Me.Close()
End Try
End Sub
Public Shared Function CreateParameter(ByVal name As String, _
ByVal type As OleDbType, _
ByVal size As Integer, _
ByVal direction As ParameterDirection, _
ByVal paramValue As Object) As OleDbParameter
Dim param As OleDbParameter = New OleDbParameter
param.ParameterName = name
param.OleDbType = type
param.Size = size
param.Direction = direction
param.Value = paramValue
Return param
End Function
Private Shared Function CreateCommand(ByVal strProcedure As String, ByVal prams As OleDbParameter()) As OleDbCommand
Dim CmdSAS400 As OleDbCommand
Dim parameter As OleDbParameter
Dim connAS400 As OleDbConnection
connAS400 = New OleDbConnection("Provider=IBMDA400;Data Source=AHISERIESDEV1;User Id=****;Password=****;")
connAS400.Open()
CmdSAS400 = connAS400.CreateCommand()
CmdSAS400.CommandText = strProcedure
CmdSAS400.CommandType = CommandType.StoredProcedure
CmdSAS400.Parameters.Clear()
'CmdAS400.CommandTimeout = intTimeOut
If (prams Is Nothing) Then
Else
For Each parameter In prams
CmdSAS400.Parameters.Add(parameter)
Next
End If
Return CmdSAS400
End Function
I have a UI which supplies 16 parameters to my stored procedure , which in turn call another sored procedure on as400 which returns result set. So far i am able to send 16 parms and get the values in dataset.
My question here how would i send the result set to UI for display, please feel free to comment on any changes need to be made on code . I badly need to find a solution for this and i appreciate any feed backs
Thanks
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies View RelatedFor some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
Hi All
I have a stored procedure, sp_GetNameDetail, which return a one row, multiple columns result set.
Yet I have another storede procedure which would call sp_GetNameDetail, and would like to access this result set. Is there a way I can do this?
Thanks,
We have been asked to look into using stored procedures with SQL Server 7.0 as a way to speed up a clients site. 99% of all the articles I have read along with all the books all say Stored Procedure should be used whenever possible as opposed to putting the SQL in your ASP script. However one of my colleagues has been speaking to Microsoft and they said that that they were surprised that our client wanted to use Stored Procedures as this was the old method of database access and that now he should really consider using COM objects for data access as itis much faster. Has anyone got any views on this or know of any good aticles regarding this matter ?
View 1 Replies View RelatedI have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
I'm trying to re-write my database to de-couple the interface (MS Access) from the SQL Backend. As a result, I'm going to write a number of Stored Procedures to replace the MS Access code. My first attempt worked on a small sample, however, trying to move this on to a real table hasn't worked (I've amended the SP and code to try and get it to work on 2 fields, rather than the full 20 plus).It works in SQL Management console (supply a Client ID, it returns all the client details), but does not return anything (recordset closed) when trying to access via VBA code.The Stored procedure is:-
USE [VMSProd]
GO
/****** Object: StoredProcedure [Clients].[vms_Get_Specified_Client] Script Date: 22/09/2015 16:29:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
Hi everybody,
How can I access a webservice from inside a stored procedure? any help is greatly appriciated.
Hi everyone, im having alot of trouble trying to execute a stored proc from sql express. heres my code
DbProviderFactory db = DbProviderFactories.GetFactory("System.Data.SqlClient");
using(DbConnection conn = db.CreateConnection()){
ConnectionStringSettings s = ConfigurationManager.ConnectionStrings["constrolservicetest"];
conn.ConnectionString = s.ConnectionString;
conn.Open();
DbCommand cmd = conn.CreateCommand();
cmd.CommandText = "StoredProcedure1";
cmd.CommandType = CommandType.StoredProcedure;
DbParameter param = db.CreateParameter();
param.ParameterName = "@test";
param.Value = 2;
cmd.Parameters.Add(param);
cmd.ExecuteNonQuery();
}
****************************procedure code***************************
Create PROCEDURE dbo.StoredProcedure1
(
@test int
)
AS
Update temp
Set test = @test
******************************************************************
The code just doesn't update. I know my connection string is correct because i got the datareader to work, but i just cant get the stored proc to call. Any help will be greatly appreciated.
Thanks,
-D
Can someone tell me how to call a stored procedure from Access?
Thanks,
Dianne
How can I access Oracle stored procedure from MS SQL Server?
View 1 Replies View RelatedI tried to write a CLR stored procedure using C# in SQL 2005 to access an Access
database.
When I use the OleDbConnection class in System.Data, the procedure throws SecurityException at runtime.
Output as following:
System.Security.SecurityException: Request for the permission of type 'System.Data.OleDb.OleDbPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.OleDb.OleDbConnection.PermissionDemand()
at System.Data.OleDb.OleDbConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at Dbbest.Data.BulkStuff.bulkcopy(String source_oledb_connection_string, String source_table, String destination_table, Int32 batchSize, Int32 notifyAfter)
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.OleDb.OleDbPermission
The Zone of the assembly that failed was:
MyComputer
Hi I've run into a slight problem with my stored procedure.If I fire a query in a stored procedure, how can I access the results of that query in the stored procedure itself ?? ALTER PROCEDURE GetDetailsOfWebsiteUserForMail @request_id intAS declare @k int select person_id from Website_user w, Request r where r.user_id=w.user_id and r.request_id=@request_id set @k =person_id /* What do I do here??, value returned is unique */ if (@k!=0) /* Exists */ begin /* do something */ end else /* entry on person table does not exist */ begin /* do something */
end
I have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx
I have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx
I am switching my database from MS access to SQL server, and i want the following query to br converted to SQL stored procedure
CREATE PROCEDURE FORUM_MESSAGE AS
SELECT *
FROM FORUM_MESSAGES
WHERE ID=MessageID;
here "MessageID" is a run time generated parameter, and is not a field in the database.
thanx
Hi,
I'm new to SQL server, still in the beginning stage of learning SQL Server. I'm here would like know, besides using the Connectivity from the DTS Designer to connect to different databases, is it possible to connect the database, i.e: Access via stored procedure? and how? Pls advise...
I'm have been trying to look for the solution via a lot of SQL Server site, but fail to get what I want.
What I'm trying to do is something like :
First connect to the Database and Query the data, after that insert it into another database....
I have a stored procedure written in MS SQL Server2000 which takes argument(OUTPUT) as a cursor, and fills in the cursor with the record from the table.
I have to run this stored procedure from my C application program running in SUN OS2.9 with the help of ODBC calls.
Can anyone guide me through steps as to how to run the store procedure from my C program and receive records with the help of the cursor.
The store procedure is as follows
CREATE PROCEDURE testCursor @xyzCursor cursor varying OUT AS
DECLARE temp CURSOR
LOCAL
FOR SELECT * FROM table
OPEN temp
SET @xyzCursor=temp
RETURN(0)
GO
Hi guys I cant seem to get my stored procedure to execute properly through Access Xp. Do you think there is something wrong with my stored procedure??
CREATE PROCEDURE [insert_ConditionalLicense_UpdateFromTerms]
(@TM_# [int],
@FirstName [nvarchar](50),
@LastName [nvarchar](50),
@SS# [nvarchar](50),
@Birthdate [nvarchar](50),
@reasonforconditional [ntext],
@Notes [ntext])
AS INSERT INTO [GamingCommissiondb].[dbo].[ConditionalLicense_View]
( [TM #],
[FirstName],
[LastName],
[SS#],
[reasonforconditional],
[ConditionalStart Date])
SELECT
[TM#],
[LASTNAME],
[FIRSTNAME],
[SSN#],
[NOTES],
[DATEOFCONDITIONAL]
FROM EmployeeGamingLicense
WHERE STATUS = 'TERMINATION-COND'
IF @@Error <> '0'
RETURN
when I execute it through a command button this is the message I get "paramater" not quite sure why I am getting this message
I trying to create a general stored procedure which updates 1 out of 140 columns depending on the column name provided as a parameter.
I'm not having much luck, just wondering if anyone else had tried to do this and whether it is actually possible?
Any help would be much appreciated
Chris
I'm trying to convert an Access database application to an ASP.NET application with SQL Server 2005 as the database backend. However, I'm having trouble converting some of the queries to SQL stored procedures. Here's an example Access query that I'm trying to convert into working SQL:
SELECT DISTINCTROW EXISTS (SELECT AccountCodeID
FROM AccountCodes
WHERE CodeID = 22 AND AccountCodes.AccountID = Accounts.AccountID) AS FullTimeInfo,
EXISTS (SELECT AccountCodeID
FROM AccountCodes
WHERE CodeID = 24 AND AccountCodes.AccountID = Accounts.AccountID) AS ShortTermInfo,
EXISTS (SELECT AccountCodeID
FROM AccountCodes
WHERE CodeID = 10 AND AccountCodes.AccountID = Accounts.AccountID) AS GeneralInfo,
Accounts.*
FROM Accounts
INNER JOIN AccountCodes
ON Accounts.AccountID = AccountCodes.AccountID
WHERE (((Accounts.SummitID)=@SummitID) AND ((AccountCodes.CodeID)=10 Or (AccountCodes.CodeID)=22 Or (AccountCodes.CodeID)=24))
ORDER BY Accounts.LastName, Accounts.FirstName
My understanding is that EXISTS can only be used in the WHERE clause in SQL. Any suggestions on how to properly rewrite this?
Jon
Is there a built in stored procedure that would allow me to list outthe database permissions assigned to a particular user or role?
View 2 Replies View RelatedHello,I am having a problem when using access xp as a frontend for sql server2000.I have been trying to update a number of stored procedures (Just simpleadding fields etc) which results in access crashing with event ID 1000 and1001.Does anyone have any ideas as to what could be the problem?Thanks in advance..
View 3 Replies View RelatedI have two database SOP and CRM. Both supports windows authentication and SOP suports sql authentication too. Now i have to write a SP in SOP database with identity impersonation (with superadmin authentication) which will do some work with this impersonated id on SOP database but needs to fetch some values from CRM with the current user account - not impersonated account.Lets clear... I want to show the orders generated by all users and in the display grid there is a column like "IsMyCustomer?" which will show the order is to a customer which i have access. In CRM (MS) if i select from FilteredCustomer view i will get the customersid of those under me. And if i left outer join with FilteredOrder view in SOP (with Super Admin windows credentials) which returns orders by current user i will get the desired result.Now the problem is i can't sent two connection credentials to a SP. So what i want is to connect SOP with user's windows credentials (not with impersonation) and from the SP we will Select data with Admin's account. But i don't know is there any way to connect to a linked server with a different credentials. Like when i am selecting from CRM server it will use different credentials.Remember i am using SQL server 2000 and everything should be done through a single SP.I know i can do this easily with two different select from Data access layer. But i am looking for some performance effectinve way. My PM wants this idea to be implemented. I have no chice guys....
View 1 Replies View RelatedI am working in an access data project. I have a stored procedure that runs fine when I open and run it directly in sql. When I use the DoCmd.OpenStoredProcedure method in VB code, the stored procedure also runs fine (and successfully adds records as it should) but then I
get an error: #7874 "...can't find the
object...'[Name of sp'". This halts the vb code and is a
problem. Here's example code from a sp that causes
this problem:
Insert into Table (Field1, Field2, Field3, Field4)
Select Field1, 'Test', Field5, GetDate()
from View1
I understand there may be another syntax to run a stored procedure from access visual basic other than DoCmd. I would very much appreciate guidance as to how to do this.
Thank you.
Crossposted from VBA forum:
I'm upsizing a database from Access 2003 to a SQL Express backend combined with an Access frontend. Along the way, I'm trying to shift the larger queries into stored procedures, but many of our queries require variables. I'm having a hard time with the VBA to run this stored procedure, and looking for suggestions that make sense to a relative newbie to VBA.
Here's my code, which is being triggered by a button click on a form containing input boxes StartDt and EndDt for the date range:
Code Block
Private Sub btnDateFormQuery_Click()
'On Error GoTo Err_btnDateFormQuery_Click
If CreateDSNConnection("server", "database", "user", "password") Then
'// All is okay.
Else
'// Not okay.
End If
Dim rs_sp As Recordset 'Set in Global Module
Dim qdf As QueryDef 'Set in Global Module
Dim SP_SQL As String 'Set in Global Module
Dim Db As Database
Set Db = CurrentDb()
Set qdf = Db.CreateQueryDef("qry_Donors") 'Set in Global Module
qdf.ReturnsRecords = True 'Set in Global Module
qdf.ODBCTimeout = 15 'Set in Global Module
SP_SQL = "Execute sp_DonorQRY " & "'" & StartDt & "'" & ", " & "'" & EndDt & "'"
qdf.SQL = SP_SQL 'Set in Global Module
'Check Dates for errors
Call CheckDates 'Procedure to check dates
If CheckDatesErr = True Then
Exit Sub ' don't continue
End If
'Here is where we need to enter the code that will drive the query.
Set rs_sp = qdf.OpenRecordset
qdf.Close
rs_sp.MoveFirst
rs_sp.Close
Exit_btnDateFormQuery_Click:
Exit Sub
Err_btnDateFormQuery_Click:
MsgBox Err.Description
Resume Exit_btnDateFormQuery_Click
End Sub
During Debugging, when I reach the line "qdf.SQL = SP_SQL", I receive the following error:
Runtime Error '3129'Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'.
I've been able to copy out the value of SP_SQL and paste it into a pass-through query, and it runs beautifully. Just not having any luck trying to script it.
Thanks in advance.
I would like to provide the db_datareader and db_executor role to a particular SQL Server Login in a database
But, I would like to avoid any INSERT's, UPDATE's or DELETE's that may happen by calling the stored procedures
I tried assigning the db_denydatawriter role but it doesn't seem to be doing the trick as the INSERT's, UPDATE's and DELETE's were still working
Is there any way to provide the db_datareader and db_executor role but avoid any DML actions.
When using JDBC is it possible to ignore input parameters in a stored procedure if they have default values?
I can create a string and execute a PreparedStatement but I'd like to use a Callable Statement.
Hello,
I am trying to access the Return Value provided by a stored procedure executed on SQL Server 2005. The stored procedure has already been tested and it returns the required value. However, I do not know how to access this value. I have tried appending a parameter to the command object using "adParamReturnValue" but that only returns an error. The code works fine without appending this parameter. I have tested it by grabbing the recordset and returning the first field.
To avoid any confusion, I'm not talking about adding an "output" parameter to the stored procedure. I just want to be able to access the return value provided when the procedure is executed. Below is some of the code I am using.
try{
pCmd.CreateInstance((__uuidof(Command)));
pCmd->ActiveConnection = m_pConnection;
pCmd->CommandType = adCmdStoredProc;
pCmd->CommandText = _bstr_t("dbo.GetFlightPlan");
............................ code here ........................................
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("AircraftID"),adChar,adParamInput,7,vAcId));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureAerodome"),adChar,adParamInput,4,vDepAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DestinationAerodome"),adChar,adParamInput,4,vDestAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureHour"),adInteger,adParamInput,2,vDepHour));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureMin"),adInteger,adParamInput,2,vDepMin));
VARIANT returnVal;
returnVal.vt = VT_I2;
returnVal.intVal = NULL;
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("RETURNVALUE"),adInteger,adParamReturnValue,sizeof(_variant_t),returnVal));
//Get Return value by executing the command
//The return value should be the DB unique ID.
pCmd->Execute(NULL, NULL, adCmdStoredProc);
int uniqueId = returnVal.intVal;
//pRst = pCmd->Execute(NULL, NULL, adCmdStoredProc);
//GetFieldValue(0,pRst,uniqueId);
printf("The DB unique ID is: %i",uniqueId);
return uniqueId;
}
Cheers,
Seth
IF EXISTS (SELECT 1 FROM RoleUser WHERE User_Id = 12346 AND Role_Code = 'CRC')
UPDATERoleUser
SETAccess= 1,
Worklist= 0,
Supervisor= 0
WHERERole_Code= 'CRC'
[Code] ....