Stored Procedure Too Slow
Apr 30, 2008When the same code is executed in query analyzer it takes 2s instead of 20s when executing the sp. Any idea?
View 9 Replies
ADVERTISEMENT
Stored Procedure Runs Slow Only Sometimes
Jan 6, 2006When i execute a stored procedure it generally takes about half a second to run but sometimes it takes 20 to 30 seconds. I am the only one using the server so I know it is not due to other traffic. I have looked at Profiler and nothing looks out of the ordinary. Another observation is that the slow ones are always near eachother. I will have about 10 fast executions and then 3 slow ones and then back to fast ones. Has anyone seen anything like this before?
View 5 Replies View RelatedHow To Simplify This Slow Stored Procedure
Jan 20, 2005Dear Reader(s),
Is there anyway to write the following stored procedure without the loop so that it goes much faster? :confused:
----------------------------------------------------------------------------
use MJ_ReportBase
go
if exists(select 1 from sysobjects where type='P' and name='sp_Periode')
begin
drop procedure sp_Periode
end
go
create procedure sp_Periode
@start int
, @stop int
as
declare @x int
set @x = 0
set @x=@start
delete from tbl_periode
while (@x>=@stop)
begin
-- ---
-- ---
-- Create table tbl_inout
if exists(select 1 from sysobjects where type='U' and name='tbl_inout')
begin
drop table tbl_inout
end
select datetimestamp,accname,badgeid,personname,inoutreg into tbl_inout from WinXS..x18 where convert(varchar,datetimestamp,120)+' '+ltrim(str(id))+' '+ltrim(str(badgeid)) in
(select convert(varchar,max(datetimestamp),120)+' '+ltrim(str(max(id)))+' '+ltrim(str(badgeid)) as datetimestamp from WinXS..x18 where (accname='Kelder -1' or accname='Tnk Entree') and convert(varchar,datetimestamp,105)=convert(varchar ,getdate()-abs(@x),105) group by badgeid)
and badgeid>0
order by personname
-- ---
-- ---
-- Create table tbl_result
if exists(select 1 from sysobjects where type='U' and name='tbl_result')
begin
drop table tbl_result
end
-- ---
-- ---
select
convert(varchar,datetimestamp,105) 'DATUM'
, badgeid 'PAS'
, initials 'VOORNAAM'
, personname 'NAAM'
, convert(varchar,min(datetimestamp),108) 'MIN'
, convert(varchar,max(datetimestamp),108) 'MAX'
into
tbl_result
from
WinXS..x18
where
convert(varchar,datetimestamp,105)=convert(varchar ,getdate()-abs(@x),105)
and
accname in ('Kelder -1','Tnk Entree')
and badgeid>0
group by
convert(varchar,WinXS..x18.datetimestamp,105)
, badgeid
, initials
, personname
order by
initials
, personname asc
, convert(varchar,datetimestamp,105) asc
-- ---
-- ---
-- Rapportage tabel
insert into
tbl_periode
select
tbl_result.datum as DATUM
, ltrim(ltrim(rtrim(tbl_result.naam))+' '+ltrim(rtrim(isnull(tbl_result.voornaam,' ')))) as NAAM
, tbl_result.min as MIN
, tbl_result.max as MAX
, case tbl_inout.inoutreg when 1 then 'in' when 2 then 'out' else 'err' end as [IN/OUT]
, substring('00000',1,5-len(tbl_result.pas))+ltrim(str(tbl_result.pas)) as PAS
from
tbl_inout,tbl_result
where
tbl_result.datum+' '+tbl_result.max+' '+ltrim(str(tbl_result.pas))
= convert(varchar,tbl_inout.datetimestamp,105)+' '+convert(varchar,tbl_inout.datetimestamp,108)+' '+ltrim(str(badgeid))
order by
tbl_result.naam asc
-- ---
-- ---
--
set @x=@x-1
end
go
print 'Klaar!'
--------------------------------------------------------------------------
What it does is determining the minimum entry time and the maximum exiting time per day of people going true the main entrance of a building.
Many thanks in advance.
:)
Slow Execution Of Stored Procedure
Jun 29, 2007Hello,
I have a big problem with slow execution of stored procedure in SQL Server 2005 but I really don't understand the reason. I have a database with large table (about 400 million rows) and simple stored procedure to get data from that table (one select statement to select time and value columns).
Strange thing is that if I call that stored procedure from .net application (native SqlDataProvider) it takes about 6 seconds to execute but if I call the same procedure with the same parameters from within SQL Server Management Studio it takes only 25 milliseconds to execute!
I've noticed that from .net, procedure is called with binary data and in Management Studio sql script is executed so I've copied/pasted the script from Management Studio to .net code and again the same thing happens (6 seconds from .net and 25ms from Management Studio). I traced executions with SQL Profiler and everything seems to be identical for both applications except it takes much longer time for .net application.
Both SQL Server Management Studio and .net application are on the same machine and SQL Server is on another.
This is the query that when executed in Management Studio takes 25ms:
EXEC [dbo].[GetRawData] @pcu = N'DV_ZERJ_HEV1',@tag = N'MJERENO',@from = N'20070629 07:00:00',@to = N'20070629 08:00:00'
This is the same query in .net application code that takes 6 seconds to execute:
sqlCommand = new SqlCommand("EXEC [dbo].[GetRawData] @pcu = N'DV_ZERJ_HEV1',@tag = N'MJERENO',@from = N'20070629 07:00:00',@to = N'20070629 08:00:00'",sqlConnection);
sqlReader = sqlCommand.ExecuteReader();
At first I thought that Management Studio somehow caches results but if I change parameters of stored procedure it always takes less than 30ms to execute.
I really don't understand this. Please, help!
Stored Procedure Running Slow In ADO.NET
Jan 9, 2008We have a stored procedure which is running fine on a SQL server 2000 from Query Analyzer. However, when we try to execute the same stored procedure from ADO.NET in an executable, the execution is hung or takes extremely long. Does anyone have any ideas or suggestions about how it could happen and how to fix. thanks
View 22 Replies View RelatedStored Procedure - Page Load Slow
Jul 25, 2006Hi all,
I have a webpage with a Datagrid that populates using a table adapter from a Stored procedure that exists in my SQL Database...If I run the Stored procedure in SQL Directly then it takes 20 Secs to return all records...If I run the webpage then it takes just over 20 Secs..
Great you say..But If I have the sorting option set in ASP.net and I click on a column to sort then off the page goes for another 20 secs to sort the data..
Is there a better way to do what I am doing here that will speed up the page load..
Ie..the data is returned once and then sorted...
Is it Better / Quicker for me to create a table using the stored procedure and link to this from the website..Updating the table every couple of minutes ?
Any advice please ?
Ray..
Stored Procedure Run From ASP.NET Page Gets Very Slow Intermittently
Dec 5, 2006I have developed a stored procedure that filters a view that is a union of several different tables. This provides status information for items across our warehouse management system. This system seems to work very well and normally processes results very quickly (< 3 seconds). However, occasionally (every few days) we begin to see timeouts on the query after 3 minutes of processing. I can watch this process in SQL Profiler and see that the query is timing out after 180 seconds, which is the timeout we have for the query within the DAL. When I copy the line from the SQL Profiler and execute it directly in SSMS, the query executes in less than 2 seconds. I first thought that somehow this had to do with execution plans, but when I try to reload the page again, which executes the query, it still times out. I did add a OPTION(KEEPFIXED PLAN) to the sproc, and that seemed to speed things up for the time, but I am not sure if this is even the problem and what the optimal solution would be. Any thoughts spring to mind?
Thanks, Steve
Stored Procedure Works But Very Slow (was Optimization)
Mar 1, 2005I have a big table A_newHistory (more than 2 million rows) with primary key fund_id + date_price . This table has to be updated every 2 hours from XML.
Every row in XML must be inserted or updated (if current id and date already exist in the table) in the A_newHistory.
The following procedure works but very slow...
How can I optimize that?
================================================== =======
CREATE PROCEDURE spSaveFundsAdjustedClose
@XML ntext
AS
DECLARE @fund_id int
DECLARE @date_price datetime
DECLARE @adj_closed float
DECLARE @XMLDoc int
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION
EXEC sp_xml_preparedocument @XMLDoc OUTPUT, @XML
DECLARE MutualFunds_Cursor CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT *
FROM OPENXML (@XMLDoc , '/xml/a', 1)
WITH ([id] INT,[date] datetime, price float)
OPEN MutualFunds_Cursor
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
WHILE @@FETCH_STATUS = 0
BEGIN
IF EXISTS (SELECT * FROM A_newHistory
WHERE id_fund = @fund_id AND date_price = @date_price)
BEGIN
UPDATE A_newHistory
SET adj_close = @adj_closed
WHERE id_fund = @fund_id AND date_price = @date_price
END
ELSE
BEGIN
INSERT INTO A_newHistory
VALUES(@fund_id, @date_price, @adj_closed)
END
IF @@Error <> 0
BEGIN
ROLLBACK TRANSACTION
SELECT -1
RETURN
END
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
END
EXEC sp_xml_removedocument @XMLDoc
CLOSE MutualFunds_Cursor
DEALLOCATE MutualFunds_Cursor
COMMIT TRANSACTION
SELECT 0
GO
================================================== =======
Slow Stored Procedure - Easy Located But Wtf?
Jul 20, 2005Hi,Plz, I need some info (SQL2000) :)A stored procedure is like this:"Select table1.id, table1.txt, (select table2.nr from table2 wheretable2.fk_table1=table1.id) as nr where table1.id<>10"The essence here is that "select table2.nr from table2 wheretable2.fk_table1=table1.id" returns either the integer in table2.nr, or NULLif there isnt a match. The whole sentence runs EXTREMELY slow...3-4 sec.What is wrong?"select table2.nr from table2 where table2.fk_table1=table1.id" runs quicklyoutside the stored procedure. The original sentence without the "nr" (Selecttable1.id, table1.txt where table1.id<>10) runs quickly too...But together it slows down dramatically..why? I should mention that thesub-query could return NULL if theres no match in table2...But i cant seewhy that should slow things down (remember - it runs fine outside the SP)?Thx,PipHans---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.518 / Virus Database: 316 - Release Date: 11-09-2003
View 3 Replies View RelatedVisual Basic Slow Down Sql Server 2000 Running A Stored Procedure
Nov 30, 2007I hav the following problem. I have written an stored procedure in sql server 2000 as the following
CREATE PROCEDURE dbo.pa_rellena
@pFechaInicio datetime
AS
declare @pFechaFin datetime
declare @auxcod_cen char(10)
declare @importeEfectivo decimal(17,2)
declare @importeTarjetas1 decimal(17,2)
declare @importeTarjetas2 decimal(17,2)
declare @importeVales decimal(17,2)
declare @importeTalones decimal(17,2)
declare @importeGastos decimal(17,2)
select @pFechaFin=@pFechaInicio+1
--Borramos las tablas temporales si las hemos creado con anterioridad y no se han borrado
if object_id('tmpCentros') is not null
drop table tmpCentros
if object_id('tmpCentros2') is not null
drop table tmpCentros2
if object_id('tmpMaxCajas') is not null
drop table tmpMaxCajas
if object_id('tmpCajasCentro') is not null
drop table tmpCajasCentro
if object_id('tmpVales') is not null
drop table tmpVales
if object_id('tmpDiarioEfectivo') is not null
drop table tmpDiarioEfectivo
if object_id('tmpDiarioTalones') is not null
drop table tmpDiarioTalones
if object_id('tmpDiarioTarjetas') is not null
drop table tmpDiarioTarjetas
if object_id('tmpDiarioSegundaForma') is not null
drop table tmpDiarioSegundaForma
if object_id('tmpDiarioGastosTarjetas') is not null
drop table tmpDiarioGastosTarjetas
if object_id('temp1') is not null
drop table temp1
--Seleccionamos todos los centros de Salvador Bachiller
select * into tmpCentros2
from centros
where centros.tienda=1
order by cod_cen
--Seleccionamos el maximo de cajas por cada centro
select cod_cen, max(cod_caja) as cajas into tmpMaxCajas
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
order by cod_cen
--Mezclamos los centros con el maximo de cajas
select c.cod_cen, c.Centro, c.Direccion, c.localidad, c.provincia, c.cpostal, c.telefono, m.cajas, operaciones, cajas_tot, tienda, franquicia into tmpCentros
from tmpCentros2 as c left outer join tmpMaxCajas as m on c.cod_cen=m.cod_cen
--Cajas por centro
select distinct cod_cen as cod_cen, cod_caja as cod_caja into tmpCajasCentro
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
--Los vales de cada centro
select cod_cen,sum(importe) as imp1 into tmpVales
from vales where
fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
--Efectivo de cada centro
select cod_cen,'01' as vendedor,'EFECTIVO' as descripcion, (sum(diario.TotEuro)-Sum(Diario.Imppa2)) as importe1,0 as exp1, (sum(Diario.TotEuro)-sum(Diario.imppa2)) as importe2 into tmpDiarioEfectivo
from diario
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='01'
group by cod_cen
--Talones por centro
select centros.cod_cen,'02' as vendedor,'TALONES' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro) as importe2 into tmpDiarioTalones
from centros inner join diario on centros.cod_cen=diario.cod_cen
where fecha>=@pFechaInicio and fecha<@pFechaFin and diario.cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='02'
group by centros.cod_cen
--Tarjetas por centro
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro*(FPago.Descuento/100)) as importe2, sum(Diario.TotEuro) - sum(Diario.TotEuro*(FPago.Descuento/100)) as importe3 into tmpDiarioTarjetas
from FPago left join Diario on fpago.Cod_pago=Diario.cod_pago
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Segunda Froma de Pago
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion,sum(diario.imppa2) as importe1 into tmpDiarioSegundaForma
from fpago left join Diario on Fpago.cod_pago=diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pfechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Comisiones tarjetas de pago
select cod_cen,'10' as vendedor, 'GASTOS (-)' as descripcion, sum(Diario.imppa2*(fPago.Descuento/100)) as importe2 into tmpDiarioGastosTarjetas
from Fpago left join Diario on FPago.cod_pago= Diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
/*
--Venta neta por centro
declare cursortemporal cursor for select cod_cen from TmpCentros2
open cursortemporal
delete detallecaja_aux
fetch next from cursortemporal into @auxcod_cen
while @@fetch_status=0
Begin
select @importeVales=imp1 from tmpVales where cod_cen=@auxcod_Cen
select @importeEfectivo=importe2 from tmpDiarioEfectivo where cod_cen=@auxcod_Cen
select @importeTalones=importe2 from tmpDiarioTalones where cod_cen=@auxcod_cen
select @importeTarjetas1=importe3 from tmpDiarioTarjetas where cod_cen=@auxcod_cen
select @importeTarjetas2=importe1 from tmpDiarioSegundaForma where cod_cen=@auxcod_cen
select @importeGastos=importe2 from tmpDiarioGastosTarjetas where cod_cen=@auxcod_cen
select @importeVales=isnull(@importeVales,0)
select @importeEfectivo=isnull(@importeEfectivo,0)
select @importeTalones=isnull(@importeTalones,0)
select @importeTarjetas1=isnull(@importeTarjetas1,0)
select @importeTarjetas2=isnull(@importeTarjetas2,0)
select @importeGastos=isnull(@importeGastos,0)
print @auxcod_cen
print @importeVales
print @importeEfectivo
print @importeTalones
print @importeTarjetas1
print @importeTarjetas2
print @importeGastos
insert into detallecaja_aux (cod_cen,importe1)
values(@auxcod_cen, @importeVales+@importeEfectivo+@ImporteTalones+@ImporteTarjetas1+@importeTarjetas2-@importeGastos)
fetch next from cursortemporal into @auxcod_cen
select @importeVales=0
select @importeEfectivo=0
select @importeTalones=0
select @importeTarjetas1=0
select @importeTarjetas2=0
select @importeGastos=0
end
close cursortemporal
*/
select * from detallecaja_aux
GO
When I try to run it from visual basic it slow down the sql server.
What can I do?
SQL Server 2005 Stored Procedure Is Very Slow Vs. SQL Server 2000
Apr 18, 2008Hi there,
I was wondering if someone can point out the error or the thing I shouldn't be doing in a stored procedure on SQL Server 2005. I want to switch from SQL Server 2000 to SQL Server 2005 which all seems to work just fine, but one stored procedure is causing me headache.
I could pin the problem down to this query:
DECLARE @Package_ID bigint
DECLARE @Email varchar(80)
DECLARE @Customer_ID bigint
DECLARE @Payment_Type tinyint
DECLARE @Payment_Status tinyint
DECLARE @Booking_Type tinyint
SELECT @Package_ID = NULL
SELECT @Email = NULL
SELECT @Customer_ID = NULL
SELECT @Payment_Type = NULL
SELECT @Payment_Status = NULL
SELECT @Booking_Type = NULL
CREATE TABLE #TempTable(
PACKAGE_ID bigint,
PRIMARY KEY (PACKAGE_ID))
INSERT INTO
#TempTable
SELECT
PACKAGE.PACKAGE_ID
FROM
PACKAGE (nolock) LEFT JOIN BOOKING ON PACKAGE.PACKAGE_ID = BOOKING.PACKAGE_ID
LEFT JOIN CUSTOMER (nolock) ON PACKAGE.CUSTOMER_ID = CUSTOMER.CUSTOMER_ID
LEFT JOIN ADDRESS_LINK (nolock) ON ADDRESS_LINK.SOURCE_TYPE = 1 AND ADDRESS_LINK.SOURCE_ID = CUSTOMER.CUSTOMER_ID
LEFT JOIN ADDRESS (nolock) ON ADDRESS_LINK.ADDRESS_ID = ADDRESS.ADDRESS_ID
WHERE
PACKAGE.PACKAGE_ID = ISNULL(@Package_ID,PACKAGE.PACKAGE_ID)
AND PACKAGE.CUSTOMER_ID = ISNULL(@Customer_ID,PACKAGE.CUSTOMER_ID)
AND PACKAGE.PAYMENT_TYPE = ISNULL(@Payment_Type,PACKAGE.PAYMENT_TYPE)
AND PACKAGE.PAYMENT_STATUS = ISNULL(@Payment_Status,PACKAGE.PAYMENT_STATUS)
AND BOOKING.BOOKING_TYPE = ISNULL(@Booking_Type,BOOKING.BOOKING_TYPE)
-- If this line below is included the request will take about 90 seconds whereas it takes 1 second if it is outcommented
--AND ADDRESS.EMAIl LIKE '%' + ISNULL(@Email, ADDRESS.EMAIL) + '%'
GROUP BY
PACKAGE.PACKAGE_ID
DROP TABLE #TempTable
The request is performing quite well on the SQL Server 2000 but on the SQL Server 2005 it takes much longer. I already installed the SP2 x64, I'm running the SQL Server 2005 on a x64 environment.
As I stated in the comment in the query it takes 90 seconds to finish with the line included, but if I exclude the line it takes 1 second.
I think there must be something wrong with the join's or something else which has maybe changed in SQL Server 2005. All the tables joined have a primary key.
Maybe you folks can spot the error / mistake / wrong type of doing things easily.
I would appreciate any help you can offer me to solve this problem.
On the web I saw that there is a Cumulative Update 4 for the SP2 which fixes the following:
942659 (http://support.microsoft.com/kb/942659/)
FIX: The query performance is slower when you run the query in SQL Server 2005 than when you run the query in SQL Server 2000
Anyhow I think the problem is something else, I haven't tried out the cumulative update yet, as I think it is something different, more general why this query takes ages to process.
Thanks again for any help
Best regards,
Pascal
Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)
Nov 1, 2007Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?
Mar 3, 2008Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Slow Procedure Using View
Jul 20, 2005HiI have a procedure that calls a view. The view is built with some outerjoins but it performs fine.If I run in Query Analyzerselect count(*) from long_name_viewwhere name_id = 'AAA'it returns instantlyThe procedure has the same code. I juststripped down the code to narrowthe problem:create or replace procedure my_name_proc@nid VARCHAR(32)ASDECLARE@nidkey_count INTEGERselect @nidkey_count = count(*)from long_name_viewwhere name_id = @nidprint 'The count: ' + CAST(@nidkey_count as varchar)GOWhen I call in Query Analyzer:exec my_name_proc 'AAA'it takes a while to run, over 20 sec and the execution plan isdifferent. What is the reason that the same view is used in differentways?Thanks*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedT-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure
Nov 14, 2014I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?
Jan 29, 2015I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.
Sep 19, 2006I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
Dec 28, 2005I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedSQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?
Sep 26, 2014I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
Slow Procedure While Checking Duplicate Records
Jun 21, 2001hello friends
i m stuck up with a problem...actually i dont have much experience in database line....i m new to this line....i have recently joined the job & this problem is like a test of me....if i will be able to give the solution then everything is fine otherwise i will be fired & im not in a condition to leave this job as this is my first job in software development....i have got this chance with lots of difficulty....so please help me if u can...
the problem is....>> i m using a procedure to check the duplicatye records by using string comparison against address of persons..allover the country....
i m using SQL server 7.0
i have a single table(name of table is DATA) which contains 350000 records( i mean address entries) there are about 35 columns but i have to check duplicate records only against address field...for that first of all i remove special characters from the address field.....then i compare first 20 characters for duplicate entries...
for this i m generating another table(name of another table is RESULT)...
how the logic works...initially the data table contains the records but the result table is totally blank....first of all i pick first entry of address from DATA table then...check it with the entry in RESULT table if the entry exists... it compares the address if the record is same then it generates a refference of this address and make an entry....means a refference of that entry....(as far as very first record is concerned there will be no entry in the RESULT table so it will enter the address over there...then it picks up the second record...checks it in the RESULT table...now this record will be compared with the one & only entry in the RESULT table....if the entry is same then the refference will be entered... otherwise it will be entered as second record in the RESULT table....)
now where lies the problem.....initially the procedure is very fast.... but it gradually slows down .....because(when it checks the 10th record for duplication it compares the entry in RESULT table for 9 times only
*** similarly when it checks the 100th record it compares it for 99 times
*** similarly when it checks the 10000th record it compares it for 9999 times
so here lies the problem....
when it checks the 100000th record it gets dammm slow...
what i have get till now is that i have checked.....>>>>>
5000 records in 4 mins....
25000 records in 22 mins....
and
100000 records in 20 hours....(means initially its faster but it gradually slows down)
************************************************** ************************
here i m giving the code for the procedure......
************************************************** *************************
CREATE PROCEDURE pro1 as
SET NOCOUNT ON
Declare @IvgId as numeric(15)
Declare @Address as nvarchar(250)
Declare @AddressClean as nvarchar(250)
Declare @MaxLen as INT
Declare @Add as nvarchar(250)
Declare @Ic as int
Declare @FoundIvgId as numeric(15)
Declare @NewIvgId as numeric(15)
/* here 'N' is for keeping track for some system failures etc */
Declare CurData CURSOR forward_only FOR Select IvgId, Address From Data Where ProcessClean = 'N'
OPEN CurData
FETCH NEXT FROM CurData INTO @IvgId, @Address
WHILE @@FETCH_STATUS = 0
Begin
/*here i m doing string cleaning by removing special characcters */
Select @MaxLen = len(LTRIM(RTRIM(@Address)))
Select @Address = LOWER(@Address)
Select @Ic = 1
Select @AddressClean = ' '
While @Ic <= @MaxLen
/* here @MaxLen is the maximum length of the address field but i have to compare only first 20 characters */
Begin
Select @Add = Substring(@Address, @Ic, 1)
If ascii(@Add) > 47 AND ascii(@Add) <= 64 AND @Add <> ' '
Begin
Select @AddressClean = @AddressClean + @Add
End
If ascii(@Add) > 90 AND @Add <> ' '
Begin
Select @AddressClean = @AddressClean + @Add
End
Select @Ic = @Ic + 1
End
/* now we have removed special characters , for failure checking i m using this 'Y' */
Update Data Set AddressClean = @AddressClean, ProcessClean = 'Y'
Where IvgId = @IvgId
FETCH NEXT FROM CurData INTO @IvgId, @Address
End
PRINT 'Cleaning Done.............................'
Close CurData
Deallocate CurData
/* till now procedure doesnt take too much time & cleans all the 3 lack records in abt 40 mins but next part is giving trouble */
Declare CurData CURSOR FOR Select IvgId, Address, AddressClean From Data Where ProcessDup = 'N'
OPEN CurData
FETCH NEXT FROM CurData INTO @IvgId, @Address, @AddressClean
Select @NewIvgId = 100
WHILE @@FETCH_STATUS = 0
Begin
If EXISTS (Select IvgId From Result Where SubString(RTRIM(LTRIM(AdressClean)),1,20) = SubString(RTRIM(LTRIM(@AddressClean)),1,20))
Begin
Update Result Set DupIvgId = @IvgId Where SubString(RTRIM(LTRIM(AdressClean)),1,20) = SubString(RTRIM(LTRIM(@AddressClean)),1,20)
End
ELSE
Begin
Insert Into Result Values (@NewIvgId, @Address, @AddressClean,0)
Select @NewIvgId = @NewIvgId + 1
End
Update Data set ProcessDup = 'Y' Where IvgId = @IvgId
FETCH NEXT FROM CurData INTO @IvgId, @Address, @AddressClean
End
Close CurData
Deallocate CurData
SET NOCOUNT OFF
Print 'Done................................'
************************************************** **************************
now the procedure is over....now i m writing the SQL script of DATA & RESULT table
************************************************** ************************
CREATE TABLE [dbo].[DATA] (
[IVGID] [numeric](18, 0) NOT NULL ,
[Title] [varchar] (10) NULL ,
[FirstName] [varchar] (50) NULL ,
[MiddleName] [varchar] (10) NULL ,
[LastName] [varchar] (30) NULL ,
[Add1] [varchar] (150) NULL ,
[Add2] [varchar] (50) NULL ,
[Add3] [varchar] (50) NULL ,
[City] [varchar] (30) NULL ,
[State] [varchar] (30) NULL ,
[Country] [varchar] (20) NULL ,
[Pincode] [varchar] (10) NULL ,
[OffPhone] [varchar] (20) NULL ,
[OffFax] [varchar] (20) NULL ,
[ResPhone] [varchar] (20) NULL ,
[ResFax] [varchar] (20) NULL ,
[EMail] [varchar] (50) NULL ,
[Source] [varchar] (20) NULL ,
[MODEL] [varchar] (20) NULL ,
[PNCD] [varchar] (6) NULL ,
[DupKey] [decimal](18, 0) NULL ,
[Duplicate] [int] NULL ,
[HouseHoldID] [varchar] (50) NULL ,
[YearSlab] [varchar] (10) NULL ,
[CleanStatus] [int] NULL ,
[AddStatus] [int] NULL ,
[BatchNo] [varchar] (20) NULL ,
[ModelStatus] [int] NULL ,
[Month] [int] NULL ,
[Year] [int] NULL ,
[SapStatus] [int] NULL ,
[ErrCase] [int] NULL ,
[cmpCity] [varchar] (50) NULL ,
[Product] [varchar] (1) NULL ,
[cmpPinCode] [varchar] (6) NULL ,
[Address] [nvarchar] (250) NULL ,
[AddressClean] [nvarchar] (250) NULL ,
[DupIvgId] [numeric](18, 0) NULL ,
[ProcessClean] [nvarchar] (1) NULL ,
[ProcessDup] [nvarchar] (1) NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DATA_TEST] Script Date: 15/06/2001 8:36:21 PM ******/
CREATE TABLE [dbo].[DATA_TEST] (
[IVGID] [numeric](18, 0) NOT NULL ,
[Address] [nvarchar] (50) NULL ,
[AddressClean] [nvarchar] (50) NULL ,
[DupIvgId] [numeric](18, 0) NULL ,
[ProcessClean] [nvarchar] (1) NULL ,
[ProcessDup] [nvarchar] (1) NULL
) ON [PRIMARY]
GO
so now i have given the whole description of my problem....i m eagerly waiting for reply......
if anybody can help....i will be very thankful.....
bye for now
Bhupinder singh
Slow Stored Procedures
Sep 7, 2005Hi,I have a stored procedure that normalizes data from one database toanother that is included in a SQL Agent job. The job is started by atrigger so that when a table is updated, the job to normalize dataexecutes.This happens once a day in the dead of the night when nothing else ishappening and the stored procedure takes 2.5 hours to finish. Strangely,to run the same stored procedure from Query Analyzer takes only 20minutes to do the same thing. The job is executed as the same user thatlogs in to Query Analyzer.Why does running as a job take so much longer than running it manually.At the time the job is run, there is absolutely nothing else to createwaits or deadlocks. A profiler trace shows that each statement runsquickly but then it sits and twiddles its thumbs between statements.Performance monitor shows little disk activity and only 2% to 5%processor utilization.Any ideas?
View 1 Replies View RelatedStore Procedure Does Not Return All Rows Sometimes, Slow Execution...!!!
Oct 14, 2007Dear friends,I have a problem with a simple select statement and I don't know why it is happening.I have 2 tables, Fees and FeesDataRoles. Fees presents all the fees and FeesDataRole is a middle table between Fees and Roles table. So each fee can have multiple Roles and a Role can have many Fees.Now I have a select statement:Select *From Fees Inner Join FeesDataRoles ON Fees.FeeID = FeesDataRoles.FeeIDWhere (FeesDataRoles.DataRoleID = @DataRoleID) AND (FeesDataRoles.RecordStatus = 1 ) AND (FeesDataRoles.ValidFrom >= getdate() ) AND ( FeesDataRoles.ValidTo <= getdate() OR FeesDataRoles.ValidTo is null)Now it shouldn't take that long to execute this procedure but surprisingly sometimes when I insert a value to the table and then execute this store procedure it does now show the data just added. Very strange.....!!!!I ran the procedure 5 times after inserting an item and nearly 1 out of 5 does not return the right result righ. ( It does not include the recently inserted rows)Anyone have any idea....?I used Tuning Advisor, no sugestion. I change the clustered index in FeesDataRoles from FeesDataRoleID(the primary key of the table) to DataRoleID to increase the performance, still it happens sometimes.Is my Where clause so costly that cause this problem.Please help. I really appreciate your help.Regards,Mehdi
View 2 Replies View RelatedStored Proc Slow Vs. ISQL
Jul 26, 1999Hello all.
I have a stored proc which creates a couple of temp tables, then bounces them against a production table an updates a column in the production table.
This stored proc takes about 10 minutes to run and update about 20,000 rows. If I execute each statement seperately in an ISQL window, it all runs in under 2 minutes.
Any ideas on why this is happening are GREATLY appreciated.
Sp_fkeys Stored Procedue Is Very Slow
May 18, 2006I am trying to find the tables and columns that depends on 'table1'sp_fkeys @pktable_name='table1'and this takes about eight seconds, whereas if I run it for finding alltables and columns that 'table1' depends onsp_fkeys @fktable_name='table1'this only takes a second.How can I speed up the first stored procedure execution?
View 2 Replies View RelatedUpdate Stored Proc Super Slow
Nov 5, 2006we just moved a database from a shared SQL 2000 server to SQLExpress on a VPS server. Every thing seems to work great, really no performance loss at all, except for one stored proc that is giving us problems. It's function is to update a history table, and then update the production table. On the old server, it would take less than a second to run this, now it takes anywhere from 45 seconds to 1 minute or it times out. This database is used on a classic asp web app. ANY help at all on this would be appreciated as I am pulling my hair out trying to figure out what's wrong here. here is the proc.
------------------------------------------ code ----------------------------------------------
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
SET NOCOUNT ON
go
ALTER PROCEDURE [dbo].[sp_UpdatePersonalization]
@p_id nvarchar(50),
@cust_num varchar(50),
--@publication varchar(25),
@full_name varchar(500),
@email varchar(200),
@web_address varchar(300),
@include_web bit,
@ReturnAddressYN varchar(1),
@include_email bit,
@job_title varchar(500),
@company_name varchar(500),
@tagline varchar(1000),
@phone1 varchar(30),
@phone2 varchar(30),
@phone3 varchar(30),
@phone4 varchar(30),
@phoneext1 varchar(10),
@phoneext2 varchar(10),
@phoneext3 varchar(10),
@phoneext4 varchar(10),
@phonedesc1 varchar(20),
@phonedesc2 varchar(20),
@phonedesc3 varchar(20),
@phonedesc4 varchar(20),
@company_mail_address varchar(500),
@masthead varchar(250),
@verbiage_page1 varchar(1400),
@verbiage_page4 varchar(2650),
@inc_bbb bit,
@inc_ehl bit,
@inc_eho bit,
@inc_rl bit,
@p_comments varchar(500),
@p_update_flag varchar(10)
--@frequency varchar(50),
--@mail varchar(50),
--@fold varchar(50),
--@contact varchar(50),
-- do not add this on the update! @date_added,
AS
declare @last_updated datetime
select @last_updated=GETDATE()
declare @set_update bit
--if @p_update_flag='False'
--select @set_update = 1
--else
--select @set_update = 0
if @p_update_flag='False'
INSERT INTO pers_main_arch
(
p_id,
cust_num,
publication,
full_name,
email,
web_address,
include_web,
include_email,
job_title,
company_name,
tagline,
phone1,
phone2,
phone3,
phone4,
phoneext1,
phoneext2,
phoneext3,
phoneext4,
phonedesc1,
phonedesc2,
phonedesc3,
phonedesc4,
company_mail_address,
masthead,
verbiage_page1,
verbiage_page4,
inc_bbb,
inc_ehl,
inc_eho,
inc_rl,
p_comments,
frequency,
mail,
fold,
contact,
date_added,
last_updated,
start_month,
ReturnAddressYN
)
SELECT
pm.p_id,
pm.cust_num,
pm.publication,
pm.full_name,
pm.email,
pm.web_address,
pm.include_web,
pm.include_email,
pm.job_title,
pm.company_name,
pm.tagline,
pm.phone1,
pm.phone2,
pm.phone3,
pm.phone4,
pm.phoneext1,
pm.phoneext2,
pm.phoneext3,
pm.phoneext4,
pm.phonedesc1,
pm.phonedesc2,
pm.phonedesc3,
pm.phonedesc4,
pm.company_mail_address,
pm.masthead,
pm.verbiage_page1,
pm.verbiage_page4,
pm.inc_bbb,
pm.inc_ehl,
pm.inc_eho,
pm.inc_rl,
pm.p_comments,
pm.frequency,
pm.mail,
pm.fold,
pm.contact,
pm.date_added,
pm.last_updated,
pm.start_month,
pm.ReturnAddressYN
FROM pers_main pm
WHERE pm.cust_num = @cust_num
if @p_update_flag='True' OR @p_update_flag='False' OR @p_update_flag IS NULL OR @p_update_flag=''
UPDATE pers_main SET
--cust_num=@cust_num,
--publication=@publication,
full_name=@full_name,
email=@email,
web_address=@web_address,
include_web=@include_web,
include_email=@include_email,
job_title=@job_title,
company_name=@company_name,
tagline=@tagline,
phone1=@phone1,
phone2=@phone2,
phone3=@phone3,
phone4=@phone4,
phoneext1=@phoneext1,
phoneext2=@phoneext2,
phoneext3=@phoneext3,
phoneext4=@phoneext4,
phonedesc1=@phonedesc1,
phonedesc2=@phonedesc2,
phonedesc3=@phonedesc3,
phonedesc4=@phonedesc4,
company_mail_address=@company_mail_address,
masthead=@masthead,
verbiage_page1=@verbiage_page1,
verbiage_page4=@verbiage_page4,
inc_bbb=@inc_bbb,
inc_ehl=@inc_ehl,
inc_eho=@inc_eho,
inc_rl=@inc_rl,
p_comments=@p_comments,
--frequency=@frequency,
--mail=@mail,
--fold=@fold,
--contact=@contact,
--date_added,
last_updated=@last_updated,
updated_flag=1,
ReturnAddressYN=@ReturnAddressYN
WHERE cust_num=@cust_num
------------------------------------------ code ----------------------------------------------
System Stored Procedure Call From Within My Database Stored Procedure
Mar 28, 2007I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net
Sep 13, 2007Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
Is The Transaction Context Available Within A 'called' Stored Procedure For A Transaction That Was Started In Parent Stored Procedure?
Mar 31, 2008I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Calling Stored Procedure Fromanother Stored Procedure
Oct 10, 2006Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedUse Resultset Returned From A Stored Procedure In Another Stored Procedure
Nov 15, 2006I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
SQL Stored Procedure Issue - Search Stored Procedure
May 18, 2007This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
Sql Count Using Stored Procedure Withing Stored Procedure
Apr 29, 2008I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks