Stored Procedure With 2 Variables, How To Use Them In The WHERE Statement?
Sep 29, 2005
Hi!
I need a stored procedure with this basic setup:
CREATE PROCEDURE test
@Type int
AS
SELECT *
FROM
Cards
WHERE
CASE @Type = 1111 THEN CardType = 1111 ELSE CardType = 2222 END
GO
I know that the part after WHERE is wrong. But what I would like to achieve is this:
if the @type variable equals 1111 then get alla the rows with that value in the CardType-column. The same if @type = 2222, and if @type is any other value, then choose all rows regardles of the CardType value.
How can this be done?
Thanks!
/Rickard
View 2 Replies
ADVERTISEMENT
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Sep 19, 2000
Hi!
I am kind of new to the sequel server and I have to write a stored procedure to create raw of my table. I wrote the following stored procedures, but I am not sure weather I can use variables in select statements as in the following procedure. Could you please explain what is the problem, why I am getting an error, when I am trying to create it? <The error says that there is an incorrect syntax near '@tbleName' in lines 21, 25 and 30>
Thank you very much!
Elly.
/* Inserts raw into the talble tbleName. Called from other procs.
tbleName: The name of the table to insert
other variables: values to insert
checkParentId,..: items to be checked upon-parentid, position, parent primary key
Returns:
0 : Successfully inserted a raw into the table
-1 : Position to insert is taken
-16: The specified parent does not exist
-17: Insert was unsuccessful
*/
create procedure sp_acml_createRaw (@tbleName VARCHAR(50), @nameN VARCHAR(50),
@hrefN VARCHAR(50), @posN VARCHAR(50), @parentIdN VARCHAR(50),
@nameV VARCHAR(150),@hrefV VARCHAR(255),
@posV SMALLINT, @parentIdV SMALLINT,
@checkParentId VARCHAR(50), @checkPosition VARCHAR(50),
@checkParentKey VARCHAR(50))
as
BEGIN
/* Check weather the parent exist */
IF exists (select @parentIdN
from @tbleName
where @tbleName.@checkParentKey = @parentIdV) /* if parent exist */
BEGIN
/* Check weather the isertion position is correct */
IF exists (select @checkParentId from @tbleName
where @tbleName.@checkParentId = @parentIdV AND
@tbleName.@checkPosition = @posV)
return -15 /*Insertion position is incorrect - it is taken already*/
/* Insertion postion is correct */
insert into @tbleName(@tbleName.@nameN, @tbleName.@hrefN, @tbleName.@posN, @tbleName.@parentIdN)
values (@nameV, @hrefV, @posV, @parentIdV)
IF (@@ERROR != 0)
return -17 /* Insert was unsuccessful */
return 0
END
return -16 /* The parent specified was not found */
END
/* End of sp_acml_createRaw */
View 2 Replies
View Related
Aug 25, 2004
I am writing a stored procedure that basically gets a whole lot of info. Simple enough... that part works. Now I want to add functionality to pass in sortBy and direction variables so the results can be sorted from a web page. The code I have is:
Code:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER procedure GetRecruiterApplicants
@useridvarchar(50),
@trackerGroup varchar(50),
@sortBy varchar(20),
@dir varchar(5)
as
begin
set nocount on
SELECT C.USERID INTO #VU FROM VUSERS V WITH (NOLOCK), COMPANIES C WITH (NOLOCK)
WHERE CHARINDEX(','+C.USERID+',', ','+VUSERS+',')>0 AND V.USERID=@userid
UNION SELECT @userid
SELECT distinct l.AccessCode, l.ApplicantGivenName, l.ApplicantFamilyName, l.DateCreated, l.DateApplicantAccessed, p.ApplicationTitle, l.disabled
FROM chamslinks l, chamsProjectIDs p, chamsGroups g
WHERE l.TrackerID IN (SELECT userid FROM #VU)
AND g.trackerGroup = @trackerGroup
AND p.groupTblID = g.groupTblID
AND p.ProjectID = l.ProjectID
ORDER BY l.@sortBy @dir
DROP Table #VU
set nocount off
end
The error I am getting is: "Server: Msg 170, Level 15, State 1, Procedure GetRecruiterApplicants, Line 24
Line 24: Incorrect syntax near '@dir'."
Any help?
View 5 Replies
View Related
Aug 20, 2007
i ahve the following procedure
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
create PROCEDURE testflu @p_acad_period nvarchar (5)
AS
SET NOCOUNT ON
/* Base Table fields */
DECLARE @t_student_id nvarchar (11)
DECLARE @full_time_student bit
DECLARE @student_id nvarchar (11)
DECLARE @acad_period nvarchar (5)
DECLARE @aos_code nvarchar (11)
DECLARE @aos_period nvarchar (5)
DECLARE @full_desc_static nvarchar (200)
DECLARE @full_desc_session nvarchar (200)
DECLARE @dept_code nvarchar (10)
DECLARE @aos_start_dt datetime
DECLARE @exp_length smallint
DECLARE @unit_length nvarchar (10)
DECLARE @student_year tinyint
DECLARE @hrs_per_week int
DECLARE @aos_end_dt datetime
DECLARE @no_of_weeks numeric
DECLARE @hrs_total decimal (18,2)
DECLARE @main_course_study_is_C2K tinyint
DECLARE @hrs_actual decimal (18,2)
DECLARE @hrs_actual_student decimal (18,2)
DECLARE @hrs_notional_course decimal (18,2)
DECLARE @hrs_notional_student decimal (18,2)
DECLARE @student_type nvarchar (10)
DECLARE @moa_code nvarchar (10)
DECLARE @qual_aim nvarchar (3)
DECLARE @numeric_qual_aim int
DECLARE @subject_code nvarchar (4)
DECLARE @subject_area_main nvarchar (10)
DECLARE @subject_area_group nvarchar (10)
DECLARE @course_group char (1)
DECLARE @FE_HE_type char (2)
DECLARE @nvq_lvl_ind nvarchar (1)
DECLARE @geolocn_code nvarchar (10)
DECLARE @surname nvarchar (40)
DECLARE @forename nvarchar (40)
DECLARE @birth_dt datetime
DECLARE @post_code nvarchar (8)
DECLARE @student_attend_mode nvarchar (10)
DECLARE @funding decimal (18,2)
DECLARE @key_skill_count smallint
DECLARE @additionality_yn bit
DECLARE @fee_waiver nvarchar (10)
DECLARE @start_date datetime
DECLARE @student_status nvarchar (10)
DECLARE @end_date datetime
DECLARE @spec_learn_disab nvarchar (2)
DECLARE @sldd_ind tinyint
DECLARE @age smallint
DECLARE @full_time_ind tinyint
DECLARE @age_1960_ind tinyint
DECLARE @tsn_ind tinyint
DECLARE @link_ind tinyint
DECLARE @ESOL nvarchar (3)
DECLARE @esol_ind tinyint
DECLARE @infill_ind tinyint
DECLARE @RP_entitlement tinyint
DECLARE @threshold1 datetime
DECLARE @threshold2 datetime
DECLARE @threshold3 datetime
DECLARE @student_full_cost_ind tinyint
DECLARE @fundable_ind tinyint
DECLARE @LP_entitlement tinyint
DECLARE @LP2_entitlement tinyint
DECLARE @LP3_entitlement tinyint
DECLARE @outcome nchar (10)
DECLARE @OP_entitlement tinyint
DECLARE @tenhour_ind tinyint
DECLARE @basicIT nchar (3)
DECLARE @basic_it_ind tinyint
DECLARE @special_needs_ind tinyint
DECLARE @Evening_course tinyint
DECLARE @RP_basic decimal (18,2)
DECLARE @RP_NTETS_weight decimal (18,2)
DECLARE @RP_enhance_NTETS decimal (18,2)
DECLARE @RP_enhance_Age decimal (18,2)
DECLARE @RP_enhance_TSN decimal (18,2)
DECLARE @RP_enhance_IT decimal (18,2)
DECLARE @RP_enhance_SLDD decimal (18,2)
DECLARE @RP_enhance_ESOL decimal (18,2)
DECLARE @RP_total decimal (18,2)
DECLARE @LP_basic decimal (18,2)
DECLARE @subj_area_weight decimal (18,2)
DECLARE @LP_weighted decimal (18,2)
DECLARE @LP_enhance_SLDD decimal (18,2)
DECLARE @LP_enhance_VOC decimal (18,2)
DECLARE @LP_enhance_AGE decimal (18,2)
DECLARE @LP_enhance_TSN decimal (18,2)
DECLARE @LP_enhance_HE decimal (18,2)
DECLARE @LP_enhance_FEE decimal (18,2)
DECLARE @LP_total decimal (18,2)
DECLARE @OP decimal (18,2)
DECLARE @spurs_total decimal (18,2)
DECLARE @student_SPURS_total decimal(18,2)
DECLARE @out_weight decimal (18,2)
DECLARE @main_course_study tinyint
DECLARE @exp_days int
DECLARE @act_days int
DECLARE @total_students bigint
DECLARE @total_enrolments bigint
DECLARE @acad_year_spurs decimal (18,2)
DECLARE @RP_1960 tinyint
DECLARE @RP_null_DOB tinyint
DECLARE @RP_TSN tinyint
DECLARE @RP_disab2 tinyint
DECLARE @RP_disab3 tinyint
DECLARE @RP_disab4 tinyint
DECLARE @RP_ESOL tinyint
DECLARE @LP_1960 tinyint
DECLARE @LP_null_DOB tinyint
DECLARE @LP_TSN tinyint
DECLARE @LP_disab2 tinyint
DECLARE @LP_disab3 tinyint
DECLARE @LP_disab4 tinyint
DECLARE @LP_infill tinyint
DECLARE @LP_infill_1960 tinyint
DECLARE @LP_infill_null_DOB tinyint
DECLARE @LP_infill_TSN tinyint
DECLARE @LP_infill_disab2 tinyint
DECLARE @LP_infill_disab3 tinyint
DECLARE @LP_infill_disab4 tinyint
DECLARE @LP_term2 tinyint
DECLARE @LP_term2_1960 tinyint
DECLARE @LP_term2_TSN tinyint
DECLARE @LP_term2_disab2 tinyint
DECLARE @LP_term2_disab3 tinyint
DECLARE @LP_term2_disab4 tinyint
DECLARE @LP_term3 tinyint
DECLARE @LP_term3_1960 tinyint
DECLARE @LP_term3_TSN tinyint
DECLARE @LP_term3_disab2 tinyint
DECLARE @LP_term3_disab3 tinyint
DECLARE @ndaq_qual nvarchar (12)
DECLARE @base CURSOR
UPDATE delflu
SET tot_students = 0,
tot_enrolments = 0,
flu_total = 0,
processing = 1,
process_start = GETDATE(),
process_end = NULL
WHERE acad_period = @p_acad_period
DELETE FROM delflubase
WHERE (acad_period = @p_acad_period)
SET @total_students = 0
SET @total_enrolments = 0
SET @acad_year_spurs = 0.00
SET @base = CURSOR LOCAL FAST_FORWARD
FOR
SELECT stmaos.student_id, stmaos.acad_period, stmaos.aos_code, stmaos.aos_period, stcstatd.full_desc, stcsessd.full_desc AS SessionDescription,
stcsessd.dept_code, stcsessd.aos_start_dt, stcsessd.exp_length, stcsessd.unit_length, ISNULL(stmaos.student_year, 0) AS student_year,
stcsessd.hrs_per_week / 100 AS hrs_per_week, stcsessd.aos_end_dt, stcsessd.no_of_weeks, stcsessd.hrs_total / 100 AS hrs_total,
stmfesqa.student_type, stcsessd.moa_code, stcfesdt.qual_aim, stcfesdt.subject_code, delsubj.subj_area, ISNULL(delsubj.subj_course_group, 0)
AS subj_course_group, stcfesdt.nvq_lvl_ind, stcsessd.geolocn_code, stmbiogr.surname, stmbiogr.forename, stmbiogr.birth_dt, stmadres.post_code,
stmaos.attend_mode, stmfesqa.fee_override, stmaos.start_date, RTRIM(stmfesqa.course_status) AS course_status, stmfesqa.course_status_dt as end_date,
stmfesqa.spec_learn_disab, FLOOR(DATEDIFF(day, stmbiogr.birth_dt, stsacper.age_date))/365 AS Age, delESOL.subj_code AS ESOL, delspurs.threshold1, /* Log No.132694 - SQL changed*/
delspurs.threshold2, delspurs.threshold3, stmfesqa.outcome, delbasicIT.qual_aim AS basicIT, ISNULL(delsubjarea.subj_area_weight, 0.00)
AS subj_area_weight, ISNULL(deloutwgt.weighting, 0.10) AS weighting, ISNULL(stmaos.additionality_yn, 0) AS additionality_yn,
nicisreports.dbo.ndaqquals.qual_ref
FROM stsacper INNER JOIN
stmaos INNER JOIN
stcsessd ON stmaos.aos_code = stcsessd.aos_code AND stmaos.acad_period = stcsessd.acad_period AND
stmaos.aos_period = stcsessd.aos_period INNER JOIN
stcfesdt ON stmaos.acad_period = stcfesdt.acad_period AND stmaos.aos_code = stcfesdt.aos_code AND
stmaos.aos_period = stcfesdt.aos_period INNER JOIN
stmfesqa ON stmaos.student_id = stmfesqa.student_id AND stmaos.aos_code = stmfesqa.aos_code AND
stmaos.acad_period = stmfesqa.acad_period AND stmaos.aos_period = stmfesqa.aos_period INNER JOIN
stmbiogr ON stmaos.student_id = stmbiogr.student_id ON stsacper.acad_period = stmaos.acad_period AND
stsacper.start_date <= stcsessd.aos_start_dt AND stsacper.end_date >= stcsessd.aos_end_dt INNER JOIN
delspurs ON stmaos.acad_period = delspurs.acad_period INNER JOIN
stcstatd ON stmaos.aos_code = stcstatd.aos_code LEFT OUTER JOIN
deloutwgt ON stcfesdt.nvq_lvl_ind = deloutwgt.nvq_lvl_ind LEFT OUTER JOIN
delbasicIT ON stcfesdt.qual_aim = delbasicIT.qual_aim AND stcfesdt.subject_code = delbasicIT.subj_code LEFT OUTER JOIN
delESOL ON stcfesdt.subject_code = delESOL.subj_code LEFT OUTER JOIN
stmadres ON stmbiogr.student_id = stmadres.student_id AND stmbiogr.perm_add_id = stmadres.add_id LEFT OUTER JOIN
delsubjarea RIGHT OUTER JOIN
delsubj ON delsubjarea.subj_area = delsubj.subj_area ON stcfesdt.subject_code = delsubj.subj_code left outer join
stcstdet on stmaos.aos_code = stcstdet.aos_code inner join
nicisreports.dbo.ndaqquals on replace(stcstdet.text_field1,'/','') = nicisreports.dbo.ndaqquals.qual_ref
where stmaos.acad_period = @p_acad_period
and (stmaos.return_ind = 'F' OR stmaos.return_ind = 'B')
AND (stmaos.stage_ind = 'E')
AND (stcfesdt.qual_aim IS not null)
AND (stcfesdt.qual_aim IS not null)
and (stmfesqa.fund_source <> '09' OR stmfesqa.fund_source IS NULL)
and stmaos.start_date is not null
and stmaos.start_date <= getdate()
OPEN @base
FETCH NEXT FROM @base
INTO @student_id, @acad_period, @aos_code, @aos_period, @full_desc_static, @full_desc_session,
@dept_code, @aos_start_dt, @exp_length, @unit_length, @student_year,
@hrs_per_week, @aos_end_dt, @no_of_weeks, @hrs_total,@student_type,
@moa_code, @qual_aim, @subject_code,@subject_area_group, @course_group,
@nvq_lvl_ind, @geolocn_code, @surname, @forename, @birth_dt, @post_code,
@student_attend_mode, @fee_waiver, @start_date, @student_status, @end_date,
@spec_learn_disab, @age, @ESOL, @threshold1, @threshold2, @threshold3, @outcome, @basicIT,
@subj_area_weight, @out_weight, @additionality_yn,@ndaq_qual
when i run the follwoing i get
exec testflu '06/07'
Server: Msg 16924, Level 16, State 1, Procedure testflu, Line 210
Cursorfetch: The number of variables declared in the INTO list must match that of selected columns.
i am unsure cos from what i can see i ahve included all, am i missing something
View 7 Replies
View Related
Aug 23, 2007
I am taking my first steps into stored procedures and I am working on a solution for efficiently paging large resultsets with SQL Server 2000 based on the example on 4Guys: http://www.4guysfromrolla.com/webtech/042606-1.shtml
The problem with my stored procedure is, is that it doesn't seem to recognize a variable (@First_Id) in my dynamic Sql. With this particular sproc I get the error message: "Must declare the scalar variable '@First_Id'"It seems to be a problem with 'scope', though I still can't yet figure out. Can anyone give me some hints on how to correctly implement the @First_Id in my stored procedure? Thanks in advance!
Here's the sproc:
ALTER PROCEDURE dbo.spSearchNieuws(@SearchQuery NVARCHAR(100) = NULL,@CategorieId INT = NULL,@StartRowIndex INT, @MaximumRows INT,@Debug BIT = 0)ASSET NOCOUNT ONDECLARE @Sql_sri NVARCHAR(4000),@Sql_mr NVARCHAR(4000),@Paramlist NVARCHAR(4000),@First_Id INT, @StartRow INTSET ROWCOUNT @StartRowIndexSELECT @Sql_sri = 'SELECT @First_Id = dbo.tblNieuws.NieuwsId FROM dbo.tblNieuwsWHERE 1 = 1'IF @SearchQuery IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND dbo.tblNieuws.CategorieId = @xCategorieId'SELECT @Sql_sri = @Sql_sri + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'SET ROWCOUNT @MaximumRows SELECT @Sql_mr = 'SELECT dbo.tblNieuws.NieuwsId, dbo.tblNieuws.NieuwsKop, dbo.tblNieuws.NieuwsLink, dbo.tblNieuws.NieuwsOmschrijving, dbo.tblNieuws.NieuwsDatum, dbo.tblNieuws.NieuwsTijd, dbo.tblNieuws.BronId, dbo.tblNieuws.CategorieId, dbo.tblBronnen.BronNaam, dbo.tblBronnen.BronLink, dbo.tblBronnen.BiBu, dbo.tblBronnen.Video, dbo.tblCategorieen.CategorieFROM dbo.tblNieuws INNER JOIN dbo.tblBronnen ON dbo.tblNieuws.BronId = dbo.tblBronnen.BronId INNER JOIN dbo.tblCategorieen ON dbo.tblNieuws.CategorieId = dbo.tblCategorieen.CategorieId AND dbo.tblBronnen.CategorieId = dbo.tblCategorieen.CategorieId WHERE dbo.tblNieuws.NieuwsId <= @First_Id AND 1 = 1' IF @SearchQuery IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND dbo.tblNieuws.CategorieId = @xCategorieId' SELECT @Sql_mr = @Sql_mr + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'IF @Debug = 1PRINT @Sql_mr SELECT @Paramlist = '@xSearchQuery NVARCHAR(100), @xCategorieId INT'EXEC sp_executesql @Sql_sri, @Paramlist, @SearchQuery, @CategorieIdEXEC sp_executesql @Sql_mr, @Paramlist, @SearchQuery, @CategorieId
View 8 Replies
View Related
Feb 9, 2006
Hi,
I want to convert a SQL query as shown below into a stored procedure:
select name
from namelist
where town in ('A','B','D')
If I want to make the town as the input variable into the stored procedure, how should I declare the stored procedure? As far as I know, stored procedure could only handle individual values, and not a range of values.
Thanks.
View 5 Replies
View Related
Jan 11, 2006
I am using a table variable inside a stored procedure that I am trying to execute from an OLE Datasource task in IS. I know there was a problem doing this in DTS, which would result in an Invalid Pointer error. I am not getting that error, but I am getting an error that says "[OLE DB Source [55]] Error: A rowset based on the SQL command was not returned by the OLE DB provider." The stored procedure runs fine on it's own.
Any thoughts?
View 24 Replies
View Related
Mar 21, 2008
I have a stored procedure. Into this stored procedure i need to pass values to a 'IN' statement from asp.net. So when i am passing it , it should b in like a string variable with the ItemIds separated by commas. the procedure i have is :
create procedure SelectDetails
@Id string
as
Select * from DtTable where itemid in(@Id)
Here the itemid field in DtTable is of type int. Now when i execute the produre it is showing error as the Itemid is int and i am passing a string value to it.
How can i solve this problem?
View 5 Replies
View Related
Nov 21, 2006
I have a foreach loop in my SSIS script. I am able to successfully enumerate through an input query. I have a script task inside of my container. I would like to use this task to formulate a Stored Procedure and save this procedrue in a variable so I can use in a future Execute SQL task.
Here is a copy of the code (Which Does Not Work) I am using in the script task to set the variables.
Public Sub Main()
Dim vars As Variables
Dim DropVariable As String
Dim CreateVariable As String
Dim InsertVariable As String
DropVariable = "Execute dbo.[sp_DropTable] '" + RTrim(Dts.Variables("varTable").Value.ToString) + "'"
CreateVariable = "Execute dbo.[sp_CustomTables] '" + RTrim(Dts.Variables("varTable").Value.ToString) + "'"
InsertVariable = "Execute dbo.[sp_InsertTable] '" + RTrim(Dts.Variables("varTable").Value.ToString) + "'"
Dts.VariableDispenser.LockOneForWrite("varDropTable", vars)
Dts.VariableDispenser.LockOneForWrite("varCreateTable", vars)
Dts.VariableDispenser.LockOneForWrite("varInsertTable", vars)
Dts.Variables("varDropTable").Value = DropVariable
Dts.Variables("varCreateTable").Value = CreateVariable
Dts.Variables("varInsertTable").Value = InsertVariable
'MsgBox(Dts.Variables("varDropTable").Value)
vars.Unlock()
Dts.TaskResult = Dts.Results.Success
End Sub
View 4 Replies
View Related
Mar 24, 2004
Hi,
I need to include two input variables
in my Order By Clause in a stored procedure like ORDER BY @column @Dirction. But MS SQL does not allow me
to do so and gives an Error 1008.
How can i solve this problem?
Thanks for your help!!
View 6 Replies
View Related
Nov 15, 2007
HiI've heard 2 things recently, can I confirm if their true/false?(1) If you have a stored procedure and you want to optimise it you cancall exec proc1,you could also use define/set for each of the variables and copy thecode into query analyser,this then makes it easier to tune. However the optimiser worksdifferently for these variables than it does for variables passed intothe query via exec and will produce a less optimalplan(2) There is a different optimiser used in query analyser than thatused otherwise? A colleaguehad a problem where a stored procedure called from dotnet code wasrunning slowly butone run from query analyser via exec, with exactly the same arguments,was running quicklyta
View 1 Replies
View Related
Sep 24, 2007
How do I pass system variables to a stored procedure? Is it possible to have an OLE DB transformation with the following sql command: exec InsertIntoLog @MachineName, @TaskName...? Do I have to use a Derived Transformation first to 'convert' variables into columns and then use exec InsertIntoLog ?, ? ...
Thanks for the help.
View 8 Replies
View Related
Oct 11, 2007
Hi , I am trying to write a stored procedure (i have given it below).i am basically trying to join 4 strings into one based on some if conditions.But the result gives only the intially assaigned string and rest are not getting concatenated.i have provided teh stored procedure below along with the inputs and result i got.Can anyone Please help me to acheive this set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[TestSearch] @distributorId int, @locationId int, @orderTypeId int, @fromDate Datetime = NULL, @toDate Datetime = NULL, @OrderStatus varchar(500) = NULL, @TaxAuthority varchar(500) = NULL, @TaxStampType varchar(500) = NULLASBEGINDeclare @SQL varchar(8000)Set @SQL ='select * from Orders AS a INNER JOINOrderLines AS b ON a.Id = b.FkOrder INNER JOINTaxStampTypes AS c ON b.FkTaxStampType = c.Id where ''' +CONVERT(VARCHAR(8),@fromDate ,1) + ''' <= CONVERT(VARCHAR(8),a.OrderDate ,1) and ''' +CONVERT(VARCHAR(8),@toDate ,1) + '''>= CONVERT(VARCHAR(8), a.OrderDate,1)and a.fkordertype = '+ convert(varchar(1),@orderTypeId) +'anda.FkDistributor = ('+ convert(varchar(50), @distributorId)+',a.FkDistributor)anda.FkLocation in ('+convert(varchar(10),@locationId)+',a.FkLocation)and'IF(@OrderStatus != null)Beginset @SQL= @SQL + 'a.FkOrderState in ('+ @OrderStatus +') and' EndIF(@TaxAuthority!= null)Beginset @SQL = @SQL +'a.FkTaxAuthority in ('+@TaxAuthority+') and'EndIF(@TaxStampType!= null)Beginset @SQL = @SQL + 'c.id in ('+ @TaxStampType+ ')and'End--Execute (@SQL1)select (@SQL);ENDHere is the Input Given to stored Procedure for executing:DECLARE @return_value intEXEC @return_value = [dbo].[TestSearch] @distributorId = 1002, @locationId = 3, @orderTypeId = 1, @fromDate = N'06/10/07', @toDate = N'10/10/07', @OrderStatus = N'2', @TaxAuthority = N'1000', @TaxStampType = N'1000'SELECT 'Return Value' = @return_valueHere Is The Output i get when I execute the stored procedure: select * from Orders AS a INNER JOIN OrderLines AS b ON a.Id = b.FkOrder INNER JOIN TaxStampTypes AS c ON b.FkTaxStampType = c.Id where '06/10/07' <= CONVERT(VARCHAR(8),a.OrderDate ,1) and '10/10/07'>= CONVERT(VARCHAR(8), a.OrderDate,1) and a.fkordertype = 1 and a.FkDistributor = (1002,a.FkDistributor) and a.FkLocation in (3,a.FkLocation) and--Ajay
View 9 Replies
View Related
Mar 18, 2008
I have a stored procedure where I gather some data and then insert the data into a table variable. I then attempt to go through each row of the table variable, asign the values to local variables to be inserted into other tables. However, the local variables show as NULL.BEGIN
DECLARE @tblcontact table
(
SOKey int,
Cntctkey varchar(60),
Cntctownerkey int,
LASTNAME varchar(32),
FIRSTNAME varchar(32),
WORKPHONE varchar(32),
EMAIL varchar(128),
processed int DEFAULT 0
)
INSERT INTO @tblcontact (SOKey, Cntctkey, Cntctownerkey, LASTNAME, FIRSTNAME, WORKPHONE, EMAIL)
SELECT ...
DECLARE @ID int,
@sokey int,
@cntctkey int,
@cntctownerkey int,
@name varchar(65),
@email varchar(128),
@phone varchar(32)
WHILE EXISTS (SELECT * FROM @tblcontact WHERE processed = 0)
BEGIN
SELECT @ID = MIN(SOKey) FROM @tblcontact WHERE processed = 0
SELECT @cntctkey = (CAST(LTRIM(REPLACE(Cntctkey,'CN',' '))AS int)),@cntctownerkey = Cntctownerkey, @name = FIRSTNAME + ' ' + LASTNAME, @phone = WORKPHONE, @email = EMAIL, @sokey = SOKey
FROM @tblcontact
WHERE @ID = SOKey AND @cntctkey <> '43778'
INSERT INTO tciContact (Cntctkey, Cntctownerkey, CreateType, EMailAddr, EmailFormat, EntityType, ExtUser, Name, Phone, UpdateCounter)
VALUES (@cntctkey, @cntctownerkey, '0', @email, '3', '401', '0', @name, @phone, '0')
UPDATE tsoSalesOrder
SET Cntctkey = @cntctkey, UserFld4 = 'temp'
WHERE SOKey = @sokey
UPDATE @tblcontact
SET processed = 1 WHERE @ID = SOKey
END
END
View 4 Replies
View Related
Apr 16, 2008
I would like to use variables to set the table name and some column names of a SQL Query in a stored procedure (the variable values will come from a webpage)... something like this:ALTER PROCEDURE dbo.usp_SelectWorkHours
@DayName varchar,@DayIDName varchar
AS
BEGINSELECT @DayName.InTime1, @DayName.OutTime1, @DayName.InTime2, @DayName.OutTime2 FROM @DayName
INNER JOINWorkHours ON @DayName.@DayIDName = @DayName.@DayIDName
INNER JOINEmployees ON WorkHours.WorkHoursID = Employees.WorkHoursID
END
RETURN
...is this possible?? if so how?
Thanks
View 2 Replies
View Related
Jun 22, 2004
Hi all,
I am using SQLHelper to run a Stored Procedure.
The Stored Procedure returns 3 variables:
ie:
SELECT @Hits = COUNT(DISTINCT StatID) FROM Stats
...etc...
The SP is currently called as below:
SqlParameter[] sqlParams = new SqlParameter[]
{
new SqlParameter("@FromDate", Request["FromDate"]),
new SqlParameter("@ToDate", Request["ToDate"]),
};
My question is this: How do I retrieve these variables?
I know I need to declare a new SqlParameter and change it's Direction to Output but I am unsure of the exact syntax required to do this.
Thanks in advance,
Pete
View 5 Replies
View Related
Apr 4, 2006
Hi Guys,
(I have searched this forum extensively, but still can't find the solution to this problem)
Here it is:
I have step in my ETL process that gets facts from another database. Here is how I set it up:
1) I have to package variables called User::startDate and User::endDate of data type datetime
2) Two separate Execute SQL Tasks populate those variables with appropriate dates (this works fine)
3) Then I have a Data Flow Task with OLE DB source that uses a call to a sproc of the form "exec ETL_GetMyData @startDate = ?, @endDate = ?" with parameters mapped accordingly (0 -> User::startDate, 1 -> User::endDate)
When I run this I get an error 0xC0207014: "The SQL command requires a parameter named "@startDate", which is not found in the parameter mapping."
It is true that the sproc in fact requires @startDate and @endDate parameters, so next thing I tried to do is call the sproc the following way: "exec ETL_GetMyData @startDate = ?, @endDate = ?"
To no avail. It gives me the same error. Incidentally, when I hard code both dates like "exec ETL_GetMyData '2006-04-01', '2006-04-02'" everything works well.
Also, I want to mention that in the first two cases, I get an error right in the editor. When I try to parse the statement it gives me "Invalid parameter number" message.
This has been such a pain in my neck. I've waisted the whole day trying to monkey with the various parts of package/statements to get this to work and it still doesn't. I dont' want to say anything about Integration Services design right now, but you probably know what I'm thinking...
View 23 Replies
View Related
Apr 12, 2008
I have a MSSQL2000 table called partspec.dbo.locationIn this table are 2 smallint columns: Tester (numbered 1-40) and Line (numbered with various integers)I am trying to create a stored procedure to read the tester number like so:Select Tester from partspec.dbo.location where Line = 2which will return up to 5 tester number results, lets say 11, 12, 24, 29 ,34My question is how do I store these tester numbers into 5 variables so that I may use them later in the sp ? So it would go something like this:CREATE PROCEDURE Table_Line
(@Tester1 integer,@Tester2 integer,@Tester3 integer,@Tester4 integer,@Tester5 integer)ASSELECT Tester FROM partspec.dbo.location where Line = 2Now this is where I'm confused on how to get 1 value into 1 variable and so on for all 5 values returned. This is what I would like to happen:
@Tester1 = 11@Tester2 = 12@Tester3 = 24@Tester4 = 29@Tester5 = 34GOThank you for any and all assistance.
View 2 Replies
View Related
Jun 20, 2007
Hello all,
I have written an XP for SQL Server 2000 SP2. It performs as expected if I call the XP with literal values for the parameters, however when I wrap the XP call into a regular stored procedure, only the first character of each input string is seen by the XP! Here are the relevant code snippets:
C++ Extended Stored Procedure:
(Basically all this code is doing is retrieving the parameters and printing them back out)
srv_paraminfo(srvproc, 1, &bType, &uMaxLen, &uLen, NULL, &bNull);
param1 = new BYTE[uLen + 1];
srv_paraminfo(srvproc, 1, &bType, &uMaxLen, &uLen, param1, &bNull);
param1[uLen] = ' ';
srv_paraminfo(srvproc, 2, &bType, &uMaxLen, &uLen, NULL, &bNull);
param2 = new BYTE[uLen + 1];
srv_paraminfo(srvproc, 2, &bType, &uMaxLen, &uLen, param2, &bNull);
param2[uLen] = ' ';
srv_paraminfo(srvproc, 3, &bType, &uMaxLen, &uLen, NULL, &bNull);
param3 = new BYTE[uLen + 1];
srv_paraminfo(srvproc, 3, &bType, &uMaxLen, &uLen, param3, &bNull);
param3[uLen] = ' ';
sprintf(msgText, "Params received by xp: %s, %s, %s", param1, param2, param3);
srv_sendmsg( srvproc, SRV_MSG_ERROR, 0,(DBTINYINT)0, (DBTINYINT)0,NULL,0,0,msgText,SRV_NULLTERM);
srv_senddone(srvproc, SRV_DONE_ERROR, (DBUSMALLINT)0, (DBINT)0);
Calling the XP with literal values:
EXEC xp_mytest 'one','two','three'
Output:
Params received by xp: one, two, three
Calling XP via a stored procedure:
create procedure sp_mytest
(
@myvar1 nvarchar(200),
@myvar2 nvarchar(50),
@myvar3 nvarchar(50)
)
as BEGIN
PRINT @myvar1
PRINT @myvar2
PRINT @myvar3
EXEC xp_mytest @myvar1, @myvar2, @myvar3
END
EXEC sp_mytest 'one','two','three'
Output:
one
two
three
Params received by xp: o,t,t
Any insight or assistance is greatly appreciated!!!
View 1 Replies
View Related
Sep 21, 2015
If I have a stored procedure that returns 15 tables, how do I distinguish the tables to assign variables to each table in c#?
View 6 Replies
View Related
Oct 17, 2007
How do you use an if then statement in a sql stored procedure? I have a table with 3 columns in it. When the tableis updated, I will only need one particular column in the database updated at a time. I will signal which column to update with an integer value(WhichColumn). So I want to key off that value to determine which column is to be updated.
Here is my pseudo code
if(WhichColumn EQUALS 1){ Update InsertEntry SET FirstColumn=Value}else if(WhichColumn EQUALS 2){ Update InsertEntry SET SecondColumn=Value}else if(WhichColumn EQUALS 3){ Update InsertEntry SET ThirdColumn=Value}
Here is a rough start to my stored procedure to incorporate the logic aboveGOCREATE PROCEDURE [dbo].[InsertEntry]( WhichColumn int Value nvarchar(500), )
View 2 Replies
View Related
Aug 10, 2005
Hey all, don't know where I am going wrong on this, and maybe it's just that it can't be done. Below is the stored procedure and page code, and after that is the description of the prob*************************
SP_GetDetails
@wherestring varchar(400) ASSelect title_id, title, type, ytd_sales, pub_id from titles where title_id IN (@wherestring)*****************************This is the function that calls SP_GetDetails*****************************Public Function GetDetails(ByVal title As String) As DataViewDim DS As DataSetDim myconnection As SqlConnectionDim mycommand As SqlDataAdaptermyconnection = New SqlConnection(_ConnString)mycommand = New SqlDataAdapter("SP_GetDetails", myconnection)mycommand.SelectCommand.CommandType = CommandType.StoredProceduremycommand.SelectCommand.Parameters.Add(New SqlParameter("@wherestring", SqlDbType.VarChar, 400))mycommand.SelectCommand.Parameters("@wherestring").Value = titleDS = New DataSetTry mycommand.Fill(DS, "Details") Return DS.Tables("Details").DefaultViewCatch ex As Exception Throw exFinally myconnection.Close()End TryEnd Function****************************And this is the Function that Calls GetDetails:****************************Public Sub Get_Info(ByVal Sender As Object, ByVal e As EventArgs)Dim data As New DataLayerDim titles As String = ""Dim item As ObjectDim ltitle As StringDim i As Integer = 0For Each item In ListBox2.Items() If ListBox2.Items(i).Selected Then ltitle = ListBox2.Items(i).Value.ToString If (i > 0) And Not (titles = "") Then titles += ", '" & ltitle & "'" Else titles += "'" & ltitle & "'" End If End If ltitle = "" i += 1NextDataList1.DataSource = data.GetDetails(titles)DataList1.DataBind()End Sub****************************Problem:The DataSet is not getting any values. If I run the procedure in the QA with values that I know work, in the place of @wherestring, it works fine and I get the proper results. However if I try and give it a value (ie: Get_Info() returns "'BU1032', 'BU1111'", which are valid values, it doesn't respond) I have a feeling that its the way that the information @wherestring gets isn't formated right to be able to plug into the SP but I don't know any other way to do it...help is greatly appreciated and if you have any questions I will answer back immediately. thanks a ton. --Shred
View 4 Replies
View Related
Aug 7, 2007
Hey everyone!
I have a stored procedure that returns employee id's and how many shifts they have signed up for between 2 dates.
If they have less then 3 entries between the date range specified I would like update their status field to inactive.
So what I'm getting at is how would I go about doing an IF statement that would check through the results of my stored procedure to see who has worked less then 3 shifts and to execute another stored procedure to update their status.
View 10 Replies
View Related
May 14, 2008
Hello,
I am new to this.
I am creating am trying to create a stored procedure that looks to see what group_id number a user selected and if they select no group_id number than it should return one of a specific set that I specify in my procedure, but if they pick just one group_id number I only want it to return those records. Here is my procedure. When I run in Managment Studio it says I have errors near my if, then and else.
Any Ideas?? Thanks in advance!
CREATE PROCEDURE EMRUserSecurityGroups @group_id int
If @group_id = "*All" then
SELECT c.user_id,c.first_name,c.last_name, b.group_id, b.group_name
FROM user_group_xref a
JOIN security_groups b on a.group_id= b.group_id
JOIN user_mstr c on a.user_id=c.user_id
WHERE b.group_id IN ('5','20','21','23','24','25','26','27','28','29','32')
else
SELECT c.user_id,c.first_name,c.last_name, b.group_id, b.group_name
FROM user_group_xref a
JOIN security_groups b on a.group_id= b.group_id
JOIN user_mstr c on a.user_id=c.user_id
WHERE b.group_id = @group_id
View 3 Replies
View Related
Jan 9, 2008
Hi Firends - What is good to use if we have to retrive records from SQL database. Should I use Stored procedures or should I write SQL statemnt in my Code.
Please let me know the advantages and disadvantages of both
Thanks in advance
View 2 Replies
View Related
Jul 20, 2005
Here's my stored procedure:CREATE PROCEDURE proc@id varchar(50),@pswd varchar(20),@no_go int OUTPUTASSET NOCOUNT ONSELECT user_id FROM tableWHERE user_id=@id AND pswd=@pswdIF @@ROWCOUNT = 0BEGINSET @no_go = 1ENDELSEBEGINSELECT date,date_mod FROM ansWHERE user_id=@idSET @no_go = 0ENDThis statement outputs the second recordset (SELECT FROM ans) whether@@ROWCOUNT is 0 or not. Why is that and how do I stop it
View 4 Replies
View Related
Oct 2, 2007
I have this code in a stored procedure: DECLARE @SQLString VarChar(200)
SET @SQLString = 'SELECT ' + @LookupField + ' FROM ' + @DBTable + ' WHERE (' + @IDField + ' = ''' + @IDValue + ''')'
Exec (@SQLString)
it works fine - with just one issue - I must grant select permission on the table.
Is there a way to do this WITHOUT granting the select permissions?
View 7 Replies
View Related
Jun 28, 2005
Is it necessary to include the Begin and End in this statement? IF @CId = '102' BEGIN SET @102 = 1 ENDOr, can it be rewritten as... IF @CId = '102' SET @102 = 1 Thanks all,Zath
View 4 Replies
View Related
Aug 26, 2005
Hello, I need a little help turning this:SELECT RequestNum FROM Tickets WHERE ReceiptDate>='" & FromDate & "' AND ReceiptDate<='" & ToDate & "'"into a sproc because of the two different values (FromDate and ToDate) for the ReceiptDate field in the database.I have this so far (problem areas are ??):Dim AuditConnection As New SqlConnection(ConnString)Dim AuditCommand As New SqlCommand("CreateAudit", AuditConnection)AuditCommand.CommandType = CommandType.StoredProcedureAuditCommand.Parameters.Add(New SqlParameter("@??", SqlDbType.NVarChar)).Value = FromDateAuditCommand.Parameters.Add(New SqlParameter("@??", SqlDbType.NVarChar)).Value = ToDateAuditConnection.Open()Dim AuditResult As SqlDataReader = AuditCommand.ExecuteReader()AuditGrid.DataSource = AuditResultAuditGrid.DataBind()AuditConnection.Close()and:CREATE PROCEDURE CreateAudit ?? ??ASSELECT RequestNumFROM TicketsWHERE ??AND ??GOI know I'm an idiot and this should be something simple. Arrrgh. Any help is appreciated immensely!!! :)
View 2 Replies
View Related
Dec 12, 2005
I'm trying to handle a stored procedure parameter. What needs to happen is that a particular statement shouldn't be executed if the parameter is empty. However, when I try it I get the following error:Cannot use empty object or column names. Use a single space if necessary.So, what's the correct way of doing the following?IF @filename <> ""BEGIN UPDATE Experimental_Images SET contentType = @contentType, filename = @filename WHERE (id = @iconNo)END
View 1 Replies
View Related
Feb 10, 2006
Hi
I want to run a stored procedure which updates a password. I
have the a table 'users' which has columns 'name' (as primary key) and
'pwd', which hold the username and password respectively. The
stored procedure accepts @username (the username), @pwdOld and @pwdNew
(the old and new passwords).
The following procedure returns 1 if the user inputs the correct old password.
strCreateStoredProcedure = " " & _
"CREATE PROC changePassword1 " & _
"( " & _
"@userName VarChar(20), " & _
"@pwdOld VarChar(50), " & _
"@pwdNew VarChar(50) " & _
") " & _
"AS " & _
"Declare @name VarChar(20) " & _
"Declare @actualPassword VarChar(50) " & _
"SELECT " & _
"@name = name, " & _
"@actualPassword = pwd " & _
"FROM users " & _
"WHERE name = @username " & _
"If @name is not null " & _
" If @pwdOld = @actualPassword " & _
" Return 1 " & _
" Else " & _
" Return -1 " & _
"Else " & _
"Return -1"
The following procedure updates the old password to the new password. So job done.
strCreateStoredProcedure = " " & _
"CREATE PROC changePassword2 " & _
"( " & _
"@userName VarChar(20), " & _
"@pwdOld VarChar(50), " & _
"@pwdNew VarChar(50) " & _
") " & _
"AS " & _
"Declare @name VarChar(20) " & _
"Declare @actualPassword VarChar(50) " & _
" UPDATE users " & _
" SET pwd = @pwdNew " & _
" WHERE name = @userName "
But using two procedures must be inefficient and slow. However, I
have not been able to combine the two. I would have thought I
should be able to replace "return 1" in the first procedure with the
UPDATE statement in the second procedure but I cannot save this
procedure.
i.e.
strCreateStoredProcedure = " " & _
"CREATE PROC changePassword1 " & _
"( " & _
"@userName VarChar(20), " & _
"@pwdOld VarChar(50), " & _
"@pwdNew VarChar(50) " & _
") " & _
"AS " & _
"Declare @name VarChar(20) " & _
"Declare @actualPassword VarChar(50) " & _
"SELECT " & _
"@name = name, " & _
"@actualPassword = pwd " & _
"FROM users " & _
"WHERE name = @username " & _
"If @name is not null " & _
" If @pwdOld = @actualPassword " & _
" UPDATE users " & _
" SET pwd = @pwdNew " & _
" WHERE name = @userName "
" Return 1 " & _
" Else " & _
" Return -1 " & _
"Else " & _
"Return -1"
Any ideas please?
Thanks in advance
Mike
View 4 Replies
View Related
Dec 19, 2000
Hi,
Can you use an IF statement in a Select statement within a stored procedure?
If so, how?
Mark
View 1 Replies
View Related
