Stored Procedure Works, Agent Job Aborts
Oct 8, 2006
One of my clients has a stored procedure on their secondary server that
copies a bunch of data from the production server. (Replication will
break the accounting software, according to its authors. The production
server generates a nightly full backup, so if the secondary can be
scripted to do a nightly restore from that same file, then that would
probably be a Big Win.)
Anyway, if I execute the stored procedure from Query Analyzer, it
finishes (after nearly 24 hours) - tested once recently, and I'm sure
at least a few times at some point in the past. If I run a SQL Server
Agent job that executes the stored procedure, then it gets cut off after
about 15-20 minutes - tested once recently with a manual run, and for
several weeks of scheduled runs before that. (This being a secondary
server, it took a while for the problem to be noticed.) What are the
likely causes of this?
Both servers are running SQL 2K with SP3, and limited to TCP/IP and
named pipes. RPC is allowed, with a 600-second timeout, but that
doesn't seem relevant, since both the successful and unsuccessful
methods go well past that length. The production server is a recent
purchase, and works well for their daily operations; the secondary
server and/or its network connection might be flaky for all I know,
but that doesn't seem relevant either, since success appears to
depend consistently on method of execution.
View 1 Replies
ADVERTISEMENT
Sep 17, 2007
Does anyone know why a backup database statement aborts a job in a stored procedure so that you can't handle the error with @@error, but when you run the same stored procedure in a query window the error handling does get run?
The snippet of code looks like this:
SET XACT_ABORT OFF
SET ANSI_NULLS OFF
set ansi_warnings off
set arithabort on
declare @backup_status int
declare @cmd varchar(1024)
SET NOCOUNT ON
print 'Options value: ' + convert(varchar, @@options)
set @backup_status = 0
if (@backup_mode = 'F')
begin
BACKUP DATABASE
@DB TO DISK = @BackupFile
with
NAME = @Name,
DESCRIPTION = @Description,
MEDIANAME = @MediaName,
MEDIADESCRIPTION = @Description,
STATS = 10,
init, nounload, noskip
if @@error != 0
begin
set @backup_status = 1
print '**************** Backup of ' + @DB + ' Failed'
end end
When this is run in a query window, the print statement at the bottom does get executed, but when run as a step in a sql agent job it does not.
Thanks.
View 1 Replies
View Related
Jun 14, 2006
Hi - I hope some of you can help me with this problem.
I'm trying to run the snapshot agent for 77 published tables, but the agent stops suddenly uninterrupted. It stops in the middle of taking a snapshot of a table containing 81,719,531 rows. The error message is pasted below.
Message
2006-06-14 05:33:33.53 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57200000 total rows copied)
2006-06-14 05:34:12.57 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57300000 total rows copied)
2006-06-14 05:34:51.23 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57400000 total rows copied)
2006-06-14 05:35:29.99 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57500000 total rows copied)
2006-06-14 05:36:09.82 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57600000 total rows copied)
2006-06-14 05:36:49.38 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57700000 total rows copied)
2006-06-14 05:37:28.56 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57800000 total rows copied)
2006-06-14 05:37:35.36 [89%] The replication agent was shut down in response to an abort request.
Does anyone know what is causing this error and how I can possibly solve it?
Best Regards,
JB Plum
View 14 Replies
View Related
Mar 25, 2006
HiI am using stored procedure in my asp.net application.filling stored procedure in datagrid.output of stored procedure is a temprory table.but resultset is blank for second time.after reconnecting to connection it is working.what is the problem?help me Thank you,
View 2 Replies
View Related
Mar 4, 2004
Hello,
I have the following stored prod in SQL server:
CREATE PROC spValidateUserIdAndPassword
@UserIdvarchar(50),
@Passwordvarchar(50)
AS
SELECT tblAdvertisers.UserID, tblAdvertisers.Password
FROM tblAdvertisers
WHERE ((tblAdvertisers.UserID = @UserId) AND (tblAdvertisers.Password = @Password))
I can run it in Query Analyzer and it returns one record as it should. I want it in ASP.NET to return the amount of rows that are effected, e.g that the login is correct.
The code I have is:
public bool ValidateUserIdAndPassword(string userId, string password)
{
sqlCommand.CommandType = CommandType.StoredProcedure;
//the name of the stored procedure
sqlCommand.CommandText = "spValidateUserIdAndPassword";
SqlParameter myParam;
//add the param's to the SP
//userId information for the user
myParam = new SqlParameter("@UserId", SqlDbType.VarChar, 50);
myParam.Value = CStr(userId);
sqlCommand.Parameters.Add(myParam);
//password information for the user
myParam = new SqlParameter("@Password", SqlDbType.VarChar, 50);
myParam.Value = CStr(password);
sqlCommand.Parameters.Add(myParam);
try
{
int rows = sqlCommand.ExecuteNonQuery();
if(rows == 1)
return true;
else
return false;
}
catch(System.Exception er)
{
//for design time error checking
return false;
}
This returns -1...
Please help me
Kind Regards
KitkatRobins :-)
View 3 Replies
View Related
Mar 1, 2005
I have a big table A_newHistory (more than 2 million rows) with primary key fund_id + date_price . This table has to be updated every 2 hours from XML.
Every row in XML must be inserted or updated (if current id and date already exist in the table) in the A_newHistory.
The following procedure works but very slow...
How can I optimize that?
================================================== =======
CREATE PROCEDURE spSaveFundsAdjustedClose
@XML ntext
AS
DECLARE @fund_id int
DECLARE @date_price datetime
DECLARE @adj_closed float
DECLARE @XMLDoc int
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION
EXEC sp_xml_preparedocument @XMLDoc OUTPUT, @XML
DECLARE MutualFunds_Cursor CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT *
FROM OPENXML (@XMLDoc , '/xml/a', 1)
WITH ([id] INT,[date] datetime, price float)
OPEN MutualFunds_Cursor
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
WHILE @@FETCH_STATUS = 0
BEGIN
IF EXISTS (SELECT * FROM A_newHistory
WHERE id_fund = @fund_id AND date_price = @date_price)
BEGIN
UPDATE A_newHistory
SET adj_close = @adj_closed
WHERE id_fund = @fund_id AND date_price = @date_price
END
ELSE
BEGIN
INSERT INTO A_newHistory
VALUES(@fund_id, @date_price, @adj_closed)
END
IF @@Error <> 0
BEGIN
ROLLBACK TRANSACTION
SELECT -1
RETURN
END
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
END
EXEC sp_xml_removedocument @XMLDoc
CLOSE MutualFunds_Cursor
DEALLOCATE MutualFunds_Cursor
COMMIT TRANSACTION
SELECT 0
GO
================================================== =======
View 1 Replies
View Related
Dec 23, 2005
Hi,I have a .NET application that connects to a SQL 2000 database usingtrusted security. It eventually calls a stored procedure that receives3 parameters - nothing special.If I simply change the connection string to use a valid Userid andPassword it still connects to the DB w/o problems but when it executesthe SP I get the following:System.Data.SqlClient.SqlException: Invalid length parameter passed tothe substring function.I change nothing but the login. Same store procedure, same parameters.Any ideas?
View 6 Replies
View Related
Mar 12, 2015
I have a process that keeps check on the row counts of about 100 stored procedures. The input parameters and "certified" row counts for all of the stored procedures are stored in a database. The process runs every day and executes all of the stored procedures using the parameters from the database with syntax below. The row count returned is compared against the known "certified" row count. If the counts are different, we receive an email alerting us that something has changed with the data or the sp query.
(This code is dynamically generated for all 100 + stored procedures)
SELECT COUNT(*) FROM OPENQUERY(SQLSERVER,'EXEC 'usp_HR_My_Stored_Procedure @inputparam1="12345",@inputparam2="12345"')
This worked well until I upgraded from SQL Server 2008 R2 to SQL Server 2014. Evidently Microsoft fixed this for me. The error below is now received anytime we attempt to execute a stored procedure with dynamic SQL through OPENQUERY.
The metadata could not be determined because statement 'EXEC (@sql_str)' in procedure 'usp_HR_My_Stored_Procedure ' contains dynamic SQL. Consider using the WITH RESULT SETS clause to explicitly describe the result set.
The stored procedures that are monitored change frequently, so it isn't reasonable to create tables with fixed column structures for all for all of the stored procs.
View 5 Replies
View Related
Jun 21, 2007
I have a stored procedure that works in my dataset editor, but when i try to run the report, only the "amount" field shows up. Everything else is blank. why is this happening. Here is the stored procedure.
USE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_TE_MKT_DETAIL_EXPENSE] Script Date: 06/21/2007 09:56:01 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_TE_MKT_DETAIL_EXPENSE]
(@Territory varchar(10) = Null)
AS
BEGIN
IF @Territory IS Null
BEGIN
SELECT
[Item_Description]+' '+'('+[Item_No]+')' Entry_Description
,ISNULL(RC_STAT.dbo.udf_Correct_Price(Item_No, Item_Ledger_Posting_Datetime, 'SALESAMP') * -1*Item_Ledger_Invoiced_Qty,Item_Ledger_Cost_Posted_GL * -1 ) Amount
,-1*[Item_Ledger_Invoiced_Qty] Quantity
,Customer_Name
,'' External_Doc_no
,[Item_Ledger_Sales_Responsible] SR_Code
,[Item_Ledger_Mars_Period_Code] ThePeriod
, Budget_Reporting_Group.Budget_Reporting_Group_Description
, Budget_Type.Budget_Type_Code, Budget_Type.Budget_Type_Description
, Budget_Reporting.Budget_Forecast_Period, Salesperson_Purchaser.SalesPerson_Purchaser_Code
, Salesperson_Purchaser.SalesPerson_Purchaser_Description
, CASE WHEN Budget_Reporting_Group.Budget_Reporting_Group_Id = 1 THEN Budget_Reporting_Amount ELSE - 1 * Budget_Reporting_Amount END AS Amount
, Salesperson_Purchaser.Territory_Code
,Territory.Name AS Territory_Name
,Region.Region AS Region_Name
, Budget_Reporting_Group.Budget_Reporting_Group_Id
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting AS Budget_Reporting
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Group AS Budget_Reporting_Group
ON Budget_Reporting_Group.Budget_Reporting_Group_Id = Budget_Reporting.Budget_Reporting_Group_Id
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Type AS Budget_Type
ON Budget_Reporting.Budget_Type_Code = Budget_Type.Budget_Type_Code
INNER JOIN NavisionReplication.dbo.Tbl_Salesperson_Purchaser AS Salesperson_Purchaser
ON Budget_Reporting.SalesPerson_Purchaser_Code = Salesperson_Purchaser.SalesPerson_Purchaser_Code
INNER JOIN [NavisionReplication].[dbo].[Qry_Item_Ledger_Detail]
ON [Item_Ledger_Sales_Responsible] = Salesperson_Purchaser.SalesPerson_Purchaser_Code
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Territory AS Territory
ON Territory.Code = Salesperson_Purchaser.Territory_Code
LEFT OUTER JOIN RC_DWDB_INSTANCE_1.dbo.Region AS Region
ON Territory.Region_Key = Region.Region_Key
WHERE Budget_Reporting.Budget_Year = 2007
AND Budget_Type.Budget_Type_Code in ('T&E', 'MKT')
END
IF @Territory IS NOT Null
BEGIN
SELECT Budget_Reporting_Group.Budget_Reporting_Group_Description
, Budget_Type.Budget_Type_Code, Budget_Type.Budget_Type_Description
, Budget_Reporting.Budget_Forecast_Period, Salesperson_Purchaser.SalesPerson_Purchaser_Code
, Salesperson_Purchaser.SalesPerson_Purchaser_Description
, CASE WHEN Budget_Reporting_Group.Budget_Reporting_Group_Id = 1 THEN Budget_Reporting_Amount ELSE - 1 * Budget_Reporting_Amount END AS Amount
, Salesperson_Purchaser.Territory_Code
,Territory.Name AS Territory_Name
,Region.Region AS Region_Name
, Budget_Reporting_Group.Budget_Reporting_Group_Id
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting AS Budget_Reporting
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Group AS Budget_Reporting_Group
ON Budget_Reporting_Group.Budget_Reporting_Group_Id = Budget_Reporting.Budget_Reporting_Group_Id
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Type AS Budget_Type
ON Budget_Reporting.Budget_Type_Code = Budget_Type.Budget_Type_Code
INNER JOIN NavisionReplication.dbo.Tbl_Salesperson_Purchaser AS Salesperson_Purchaser
ON Budget_Reporting.SalesPerson_Purchaser_Code = Salesperson_Purchaser.SalesPerson_Purchaser_Code
INNER JOIN RC_DWDB_INSTANCE_1.dbo.Territory AS Territory
ON Territory.Code = Salesperson_Purchaser.Territory_Code
LEFT OUTER JOIN RC_DWDB_INSTANCE_1.dbo.Region AS Region
ON Territory.Region_Key = Region.Region_Key
WHERE Territory.Code = @Territory
AND Budget_Reporting.Budget_Year = 2007
AND Budget_Type.Budget_Type_Code in ('T&E', 'MKT')
END
END
View 1 Replies
View Related
Mar 7, 2008
Hi i have a script works in sql query analyzer;
declare @id decimal
declare mycur CURSOR SCROLL for select myRowID from myTable order by myRowID
open mycur;
Fetch ABSOLUTE 30 from mycur into @id
close mycur;
deallocate mycur;
select @id
this script turns me a value.
i create a stored procedure from above script and its syntax is ok;
CREATE PROCEDURE SELECT_MyRow
AS
declare @cur cursor
declare @RowID decimal
set @cur = CURSOR SCROLL
for select myRowID from myTable order by myRowID
open @cur
Fetch ABSOLUTE 30 from @cur into @RowID
close @cur
deallocate @cur
select @RowID
GO
my c# code using stored procedure is below;
Code Snippet
try
{
OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection);
cmd.CommandType = CommandType.StoredProcedure;
myconnection.Open();
OleDbDataReader reader = cmd.ExecuteReader();
MessageBox.Show(reader.GetName(0));//here fails
while (reader.Read())
{
MessageBox.Show(reader.GetDecimal(0).ToString());
}
reader.Close();
myconnection.Close();
}
catch(Exception ex)
{
MessageBox.Show(ex.Message);
}
The code above fails because reader reads no values, error message is "No data exists for the row/column"
but i know exists. Can anyone help me, what is the difference between stored procedure and script ?
View 4 Replies
View Related
Nov 4, 2015
I have stored procedure on Server A which goes to ServerB to check and update table and then update on Server A as well.I have Trigger which suppose to execute stored procedure (as i mentioned above). But it failed with this error:--
Trigger code:--
CREATE TRIGGER [tr_DBA_create_database_notification] ON ALL SERVERÂ
AFTER CREATE_DATABASE
ASÂ
--execute dbadmin.dbo.usp_DBA_Refresh_DBAdmin_Tables
Error:--The operation could not be performed because OLE DB provider "SQLNCLI11" for linked server "xxx" was unable to begin a distributed transaction.Process ID 62 attempted to unlock a resource it does not own: DATABASE 21. Retry the transaction, because this error may be caused by a timing condition. If the problem persists, contact the database administrator.
Same stored procedure, if i execute manually or if i create sql job and execute this stored procedure, it works just fine..In trigger also, if i execute start job which has stored procedure, it works.My question is,why it failed when i execute stored procedure in TRIGGER.
View 5 Replies
View Related
Feb 5, 2007
I have a stored procedure thats transferring/processing data from onetable to two different tables. The destination tables have a uniquevalue constraint as the source tables at times has duplicate recordsand this will prevent the duplicates from being reported. When thestored procedure (which includes a cursor) is executed through queryanalyzer, it runs fine, and reports an error everytime it sees aduplicate value (as expected). It moves all the unique values from thesource to the destination tables.However, if the same stored procedure is run as a task/job in SQLServer Agent, the behaviour is different. The job fails when it see'sthe error and ends up skipping records or terminating the procedureall together. Eg. if there are 100 records in the source table with 10duplicates, the stored procedure when run through Query Analyzer willcopy the 90 unique records to the destination tables but when run fromSQL-Agent, it copies just 10-15 records.Any idea why this happens?
View 9 Replies
View Related
Jun 3, 2008
HI ALL
I have created a stored procedure for a routine task to be performed periodically in my application. Say, i want to execute my stored procedure at 12:00 AM daily.
How can I add my stored procedure to the SQL server agent jobs??
Any Idea..
View 1 Replies
View Related
May 8, 2015
I have 3rd party application implementation I am doing, if I have stored procedure in one database, can it be copied to other database (newly created) on the same server? I will have the name of old and new database when this will be copied. I do need to automate this copy.
View 10 Replies
View Related
Apr 18, 2008
I have a stored procedure which loops thru about 180 tables and inserts the data into one table used for reporting purposes. One field is a ntext field. If I execute the stored procedure from query analyzer the entire contents of the ntext field is available. When I run as scheduled task (every 1/2 hour) from sql server agent, the data in the ntext field is truncated.
View 2 Replies
View Related
Aug 15, 2014
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
View 4 Replies
View Related
Feb 1, 2007
I have a problem running an SSIS package in a SQL Server job. The package runs fine if I run it from the MSDB location, but if I try to run the job it fails. The job is set to Run as: SQL Agent Service Account. The SQL Service Agent service runs as a domain user SQLExec. I have logged in as this user and run the SSIS package and it runs fine, but if I create a job with only this step it fails. There isn't much information about where there is a problem. Any ideas or ways to troubleshoot this problem would be very much appreciated.
Thanks, john
View 3 Replies
View Related
Aug 16, 2007
I am extracting data from an Oracle database and have installed the latest x64 ODAC. When I run the 64 bit dtexec in cmd the package runs fine with no errors, but when creating and executing a SSIS job in the agent it fails. I've tried creating the job using CmdExec as well and I get the same errors:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:12:43 AM
Error: 2007-08-15 11:12:45.63
Code: 0xC0202009
Source: Load Dimension Data Connection manager "ora"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2007-08-15 11:12:45.65
Code: 0xC020801C
Source: CopyCustomers CustomerSource [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ora" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-08-15 11:12:45.65
The CmdExec job step uses the _exact_ same command as the one I execute successfully in cmd:
"c:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
I have managed to find two work arounds, but they are quite ugly:
1) Schedule the package execution using Windows Task Scheduler, basically create a bat file which runs the package.
2) Schedule the package in SQL Server agent, but as T-SQL script and use xp_cmdshell, i.e. EXEC xp_cmdshell 'dtexec /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW'
Both work and use the 64 bit dtexec. Not that elegant though..
CmdExec and the 32 bit version of dtexec works, but is not good enough for me since we bought new hardware and 64 bit software just to be able to address more memory. Has anyone managed to execute a SSIS package successfully using the agent and the 64 bit OraOLEDB.Oracle.1?
Any help would be greatly appreciated. Thanks!
Btw, I am using Windows Server 2003 x64 and SQL Server with SP2.
View 9 Replies
View Related
Oct 10, 2007
We have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks
Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.
View 11 Replies
View Related
Jul 23, 2005
I have database on SQL Server 2000 set up with a merge publication.This publication is configured with a number of dynamic filters toreduce the amount of data sent to each client. Each client has ananonymous pull subscription. The merge process can be triggered by thewindows sync manager and my application.To improve performance I have created some helper tables to hold themapping between user login and primary keys of selected entities.For the replicated data to be correct the contents of the helper tablesneeds to be up to date.I need to fire off a stored procedure on the publisher beforereplication starts to verify that this data is up to date. I can notsee any documented way of doing this however I have been experimentingwith some unorthodox systems.Firstly has anyone any ideas?I have been considering adding a trigger to some of the tables used bythe Microsoft replication code - yes I know this is very nasty.My problems arise because executing this stored procedure will causesome data to be updated. In updating data we could create a newgeneration in the database. I must therefore run my stored procedurebefore any the Microsoft code makes any generation checks / updates.Anyone done anything similar, Anyone have any better ideas?Any comments would be gratefully received.
View 1 Replies
View Related
Mar 10, 1999
Hi all ,
I have a problem using BCP. The execution of BCP proccess stops whenever an error of constraint voilation occurs. What i want is that the BCP should log the errors and continue the execution.
The manuals states that the errors are logged into the file specified during bcp and proccess continues. Whereas the same thing is not happening here.
I am using SQL Server version 6.5
Please help me out with a solution as soon as possible.
Thanks
Shrenik Nanavati
View 1 Replies
View Related
Sep 26, 2013
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
View 2 Replies
View Related
Dec 18, 1998
Hi,
I´m running the script below:
DECLARE @DTstart SMALLDATETIME, @DTend SMALLDATETIME
SELECT @DTstart = "980801", @DTend = "980810"
SELECT ' processing from ', @DTstart , ' to' , @DTend
SELECT GETDATE(), 'start LOOP'
DO WHILE @DTstart <= @DTend
BEGIN
exec p_pmp_charg_unif_csg @DTstart
WAITFOR DELAY "00:01:00"
SELECT @DTstart = DATEADD(DAY,1,@DTstart )
END
SELECT GETDATE(), 'start LOOP'
I´m having the following problem with SQL 7.
When running the loop, all in a sudden it stops - there´s no
error message on result.
But checking out the current error log, I´ve found the error 17824
reported .
According to the BOL, this error is related to 'priority boost' and
troubles in connection between server and client.
This SQL server 7 has the following configuration:
- 128Mb of RAM, and SQL7 can use from 0 to 128MB
- boost SQL Server priority on Windows NT
- maximum concurrent user connection is 0
Is there someone that had similar problem in SQL 7?
TVMIA
Masa
View 2 Replies
View Related
Apr 6, 2006
I searched and found similar questions on this forum, but nothing quite fits my situation.
When I try to run the SQLCMD per the instructions given on the 2nd page of the Guided Tour, the command aborts with the following message.
HResult 0x2, Level 16, State 1Named Pipes Provider: Could not open a connection to SQL Server [2].Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
I had to run the command from the command prompt window by manually navigating to sqlcmd's subdirectory to see this message. Using the Run window results in the command window closing before the message can be read. I tried using both my machine name and "localhost." Same result.
What is a local vs. remote connection? How could I perform this via a local connection, assuming that's the problem? Or how can SQL Express be configured to allow the remote connection? Did I do something wrong on the install?
View 1 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
May 29, 2007
Hi,
I'm using IsNULL(<insert something SQL witty here>) to zero out a derived column if there's no return result. When I submit my query in Management Console the results come back perfectly, when I send it over as a stored procedure (as an alter or create) then execute, my last few columns come back 0 not populated as in the query run. Anyone know why this happens?
View 9 Replies
View Related
Jun 30, 2000
I need to execute a dts package from a stored procedure. I can call up the command prompt, enter the dts command, and it executes perfectly. Here is what I am attempting to do from the stored procecure:
EXEC master..xp_cmdshell 'dtsrun /S MyServer /E /N PackageTest'
On execution, the following error is returned:
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)
Error string: Error opening datafile: Access is denied.
I would appreciate any assistance.
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Sep 19, 2006
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
View 1 Replies
View Related
Dec 28, 2005
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
