Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT
FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2
WHERE
T1.DL_CODE = T2.DL_CODE
AND
T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location: at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare) at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio ------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
I have a data flow two lookups components (call them lookup1 and lookup2). They both query the same relational table but with different values. Each has a single row result set containing one column and the each of the two columns is mapped to a corresponding package-level variable. The original data flow sequence had lookup1 executing after lookup 2. Each component redirects errors to a separate text file.
Lookup1 succeeds but lookup2 fails on every row which populates its error text file; however I can construct a sql query from the lookup2 values that returns the expected result.
If I reverse the sequence of components (lookup2 followed by lookup1) lookup2 still fails on every row. Whenever both lookups are present in the dataflow, lookup2 fails for every row and all its rows are redirected to the error text file
Now this is where it gets interesting. If I omit either lookup1 or lookup 2 from the data flow, it works. If the data flow contains lookup1 only the destination is populated. If the dataflow contains only lookup2 then no errors are written to the error text file, all lookups succeed, and the destination is populated.
I'm stumped. Is it possible that both lookups selecting from the same table could cause a problem? Each works independently, but when both are together in the data flow, lookup2 fails for every row. I've been over the configuration and code a dozen times and am positive there are no errors; besides, lookup2 runs fine if lookup1 is excluded from the data flow.
i hope that You could help me, because i must build a release version of my SSIS package in 2 hours..
This is my big issue:
i've a SQL Server 2005 (SP1 64bit version) and a remote SQL Server 2000 (SP4).. I've created a Data flow task that contains an OLEDB source (native client on SQL 2005 local server) and a Lookup Transformation that has to connect to remote SQL Server 2000 and returns me some columns.. I see all, tables, columns.. no problem at first sight.. I choose some columns to use in Lookup output and confirm.. When i re-open my lookup task, columns are not selected (checked).. obviously my oledb destination can't see that cols.. I choose, but my SSIS don't store any cols in output..
I've tried using error output, advanced editor, creating another package with sql 2005 tables only.. but no change.. the same silent error.. i cant use the columns for output to add to my sets..
can you help me plz?? i extremely need you a lot!!!
A colleague of mine has discovered some behaviour in the XML Source component that I am having trouble understanding or explaining. Here is the (obfuscated) XML document that we are looking to parse:
I'd like to draw your attention to the bit I've highlighted in red. SSIS has incorrectly defined this attribute as an unsignedLong. if you look at the data above you'll see that it has leading zeros therefore we need it to be interpreted as a string. Unfortunately (and here's the problem) there doesn't seem to be a way for us to change the generated xsd and thus refresh the external column metadata. The only way to change it is to go into the Advanced Editor and manually change the external column and output column metadata.
Is this by design? It seems very limiting if you ask me to not let us have control of what the metadata should be.
I have a package which loads the fact data from Stage into Warehouse database. This packages normally handles early arriving facts. In that package I use lookup to check the dims which exists, and where they don't I populate the dimension and use the surrogate key to load the facts. This works fine.
I had a request to load 7 years worth of historical data. Instead of re-writing the package I took the package which handles early arriving facts and deleted the section which handles early arriving facts. I knew all the dimensions already exists and I dont want to hinder the performance when I load millions of rows. During testing I found something very interesting.
If you have configured error path in the lookup component and removed the error path later, the package will NOT fail (won't produce error) even if the lookup can't find matching values.
Correct Behaviour Example 1: [1] Stage fact table has 2 records, with product code 1 and 2. [2] Warehouse Product table has only product code 1. [3] Source - Lookup - Destination in the data flow task. Error port on lookup is not configured. [4] From source we read 2 records, and the package will fail at lookup as it can't find Product Code 2.
Correct Behaviour Example 2: [1] Stage fact table has 2 records, with product code 1 and 2. [2] Warehouse Product table has only product code 1. [3] Source - Lookup - Destination in the data flow task. Error port on lookup is configured to go to RowCount. [4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and send the invalid record into RowCount.
Incorrect Behaviour Example 3: [1] Stage fact table has 2 records, with product code 1 and 2. [2] Warehouse Product table has only product code 1. [3] Source - Lookup - Destination in the data flow task. Delete the configured error port from lookup. [4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and discard the other.
My understanding if the error port is NOT configured as shown in example 2, it should fail as shown in example 1.
Am I missing a point or is this suppose to be a correct behaviour or is it a bug?
i am doing a lookup to insert new records when the lookup has failed.
this works perfectly normally. however when my recordset has a name-column of type string with width 5 and my lookup-table has a name-column of char(20) the lookup will always fail and henc always inserting new records although the name "foo" should match.
is there a workaround for this, or do the compare-columns always have to be of the same type/length ?
Let's say I've a dimension with over 20 million rows. During my ETL, I need to replace the business keys with all the surrogate keys from this large dimension. The logic choice is to use the Lookup component. But does the Lookup component load all the 20 million rows into the memory? For a large dimension surrogate key lookup, what is the typical approach? TIA.
i am using a lookup component to do a typical SCD. Compare the Natural keys and if they are the same -- REdirect the rows and do whatever, If not present -- means the Error Rows -- redirect and do whatever.
WHen I use the component to do a Historical Load (which means -- there are no rows are in the Destination table) and put the Memory to Partial Cache -- the Data Flow STalls after about 46,000 rows, it just doesnt complete after that. But the moment I switch it to Full Cache -- it flows -- But Partial is what I am supposed to be using -- keeping in mind -- the Incremental Loads. Why does the component stall ?
I had used Partial Cache in an earlier project -- with a 18 Million Row Table --(albeit for incremental load) and it worked fine (though is was slow -- but tleast it worked) -- but now I am trying to load just 300,000 rows but it stalls.
I am using a 2GB RAM machine -- and set the Memory to 750 MB/500 MB nothing worked
I tried two different machines -- same thing happened.
Is it possible to reuse a Lookup component which is configured with Full chaching?
My requirement is as follows....
A input file have 2 columns called CurrentLocation and PreviousLocation. In the dataflow, values of these two columns needs to be replaced with values from a look up table called "Location".
In my package i have added two LookUp components which replaces values of CurrentLocation and PreviousLocation with the values available in the table "Location". Is there any way to reuse the cache of first lookup component for second column also?
I am facing a problem with Lookup component in SSIS. I need to lookup from a transaction table for getting some info, But when im trying to implement the same, the Pre-Execute step itself got failed saying like, [DTS.Pipeline] Information: The buffer manager failed a memory allocation call for 524264 bytes, but was unable to swap out any buffers to relieve memory pressure. 9467 buffers were considered and 5956 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked. [Tracer [19717]] Error: A buffer could not be locked. The system is out of memory or the buffer manager has reached its quota. [DTS.Pipeline] Error: component "Tracer" (19717) failed the pre-execute phase and returned error code 0xC020204B.? Component Tracer is the Look up. Tracer is having around 6.5 mil records. Is there any way to allocate more buffers thru buffer manager? Or is there any alternative to solve this problem? FYI, the hard disk free space is more than 250 GB. Thanks in advance.
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute Taking a snapshot of the reference table Taking a snapshot of the reference table Building Fuzzy Match Index component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
I have a requirement to access a lookup table from within an SSIS Transform Script Component
The aim is to eliminate error characters from within the firstname, lastname, address etc. fields by doing a lookup of an ASCII code reference table and making an InStr() type comparison.
I cannot find a way of opening the reference data set from withing the transform.
I am using a lookup component in a SSIS data flow. The lookup is a select to a foxpro table. THe lookup works fine with full cache selected. I cannot get the lookup to work with a partial or no cache. I have the latest Foxpro OLE DB driver installed which I understand to support paramaterized queries. Has anyone had success with using cached lookup to Foxpro? Does anyone know how to set the lookup properties of sqlcommand and sqlcommandparam? I am unable to find any examples in BOL or on the web.
Here are some details. IF I go with "use a table or a view" option with the default cache query I get initialization errors
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E14 Description: "Command contains unrecognized phrase/keyword.".
In the advanced editor I see
SQLCommand set to
"select * from `kcf`"
and SQLCommandParam set to
"select * from (select * from `kcf`) as refTable where [refTable].[patkey] = ? and [refTable].[dayof_stay] = ? and [refTable].[modifier] = ? and [refTable].[kcf_code] = ? and [refTable].[source] = ? and [refTable].[kcf_time] = ?"
I believe the above error is because Foxpro V7 does not support the inner subselect . In addition the query contains CRLF without a continuation character (";").
If I remove the CRLF in the sqlcommandparam query, using the advanced editor, I get this design time error "OLE D error occurred while loading column metadata. Check the sqlcommand and sqlcommandparam properties". The designer requires both properties to be set, its unclear to me how the interact.
I cannot find any examples in BOL or on the web on how to set these 2 properties. Can someone give me a few guidelines?
I can get past the design errors by changing sqlcommandparam to a plain select that is VFP 7 compatible ( I removed the subselect and the square brackets):
select * from kcf as refTable where refTable.patkey = ? and refTable.dayof_stay = ? and refTable.modifier = ? and refTable.kcf_code = ? and refTable.source = ? and refTable.kcf_time = ?
But then I get a runtime error
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E46. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E46 Description: "One or more accessor flags were invalid.".
[lkp_lab_worst_value [6170]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I am using c# and ASP.NET 2 and I am getting a very strange error. I have a field called CompanyID in SQL Server 2005, and it allows null values in it. When this CompanyID is not NULL, ie for example it is 202, then when i press the update button it allows me to update perfectly in the database. However if the CompanyID is NULL, and I try to update the companyID, to lets say 202, the application just crashes with the following message:- System.InvalidCastException: Object cannot be cast from DBNull to other types. I tried to set some breakpoints in the application to debug, however it does not even pass through these breakpoints! Any ideas on what the problem can be or how I can debug? Thanks for your help and time Johann
So we currently are running a SQL 7 Server, which hopefully we will be updating this year but untill then we're stuck. I've got a web app using ASP.NET 2.0 and on occasion I get this error: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - Only one usage of each socket address (protocol/network address/port) is normally permitted.) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open()
I Some sql that it keeps throwing the following error
SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Here is the sql
UPDATE dbo.temptable SET code = 'MM' FROM dbo.temptable T JOIN dbo.Item I WITH (NOLOCK) ON T.ProductID = P.ProductID JOIN dbo.cars C WITH (NOLOCK) ON I.ModelID = C.ModelID JOIN dbo.carmakes CM WITH (NOLOCK) ON CM.MakeID = C.MakeID JOIN dbo.CarDealerMakes CDM WITH (NOLOCK) ON CM.MakeID = CDM.MakeID WHERE T.ProductID NOT IN (
SELECT distinct A.ProductID FROM dbo.Action A WITH (NOLOCK) JOIN dbo.ActionPurchases AP WITH (NOLOCK) ON A.ActionID = AP.ActionID WHERE A.CustomerID = 2
UNION
SELECT distinct A.ProductID FROM dbo.Action A WITH (NOLOCK) JOIN dbo.ActionServices S WITH (NOLOCK) ON A.ActionID = S.ActionID WHERE 2 = A.ProductID)
That sql will run on windows 2000 but it will not run on windows 2003. I have the latest service pack.
Has anyone ever come across this before or have and suggestions ?
Hello I have one PC with SQL server 2000 and I am working on one database called TaxReg but today I found it gray and (suspect) beside it could you please tell what is the problem and how to fix it ?
SELECT TOP 9 id,vehicleref,capid,manufacturer,model,derivative,ch,'3' as term,'10000' as mileage,'orderby' as orderby,cvehicle_shortmodtext,source,studioimages FROM vwAllMatrixWithLombardAndShortModel WHERE locatcode =1 GROUP BY id,vehicleref,capid,manufacturer,model,derivative,ch,term,mileage,orderby,cvehicle_shortmodtext,source,studioimages
Msg 207, Level 16, State 1, Line 2 Invalid column name 'mileage'. Msg 207, Level 16, State 1, Line 2 Invalid column name 'orderby'.
In my package I am executing 8 'Execute package' tasks which calls 8 different packages. All these tasks are indepent so they are not connected to each other. In each package I have defined a variable at the start of each package there is a script task to assign the 'StartTime' system variable value to the user defined variable.
If I run the tasks individually, it is running without any problem. When I am running all the tasks in the parent package, very often the package fails and each time different different tasks are failing. But the error happens at the script task which is used to define the start time. The error message is 'Error: The script threw an exception: Object reference not set to an instance of an object.'. But inside the script task, I have only one statement which assigns the system start time value to the user variable. Also, in my log file, I am getting 2 entries for all the tasks in that failing child package, but I have not specified any looping in my parent package. One more peculiar thing is even though as per the log entry it ran twice, no single record is inserted/updated(????).
I am getting the following error when I try to debug a package that needs to Copy Columns from an AS400 database into SQL 2005:
[SQL Server Destination [1684]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
Has anybody seen this error and what do I need to do and check for?
I am getting this error on an almost daily basis. Using SQL 2005 fully patched.
I searched the web and couldn't fin anthing about it. has anyone here seen this problem before...
Disk space is fine btw... 35GB free
Message An error occurred while writing an audit trace. SQL Server is shutting down. Check and correct error conditions such as insufficient disk space, and then restart SQL Server. If the problem persists, disable auditing by starting the server at the command prompt with the "-f" switch, and using SP_CONFIGURE.
