I recently installed an evaluation copy of SQL Server 2000 on a machine with Windows Server 2000. Nearly all actions in the enterprise manager cause 15-second to 60-second loud, monotonous reads of the hard drive. Anything from expanding a tree item to creating a table.
This makes the product more or less unusable. What could be causing it?
All other software on the machine works normally, and nothing else seems wrong.
Hello,
I am running an SAP installation on clustered DELL poweredge 1850's with a shared scsi disk system. I am running Windows 2000 sp4 with sql 2000 sp4. I am trying to restore a database from a .bak file on a clustered disk. When I attempt to access the disk through enterprise manager it is not there. I only get access to the E: drive (which is clustered as well)
When I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
Anyone ever run into a similair problem?
Thanks
I would like to reinstall the enterprise manager of sql server 2000,and i have currently sql server 2000 SP4 installed on it.I googled on it, and read that installation of enterprise manager ispossible from the setup disk, however, this is not possible: it rejectsbecause of the service pack.How can I reinstall enterprise manager, without haveing to uninstallsql completely?ThanksPrem
View 4 Replies View RelatedHow can I measure the disk reads and writes to see if I need to add aditional disks to the server?
View 2 Replies View RelatedOn one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedI own a DELL dimesnsion 4600 desktop. I purchased it with windows xp HOME although I have upgraded to windows xp professional. I am trying to install Office Enterprise 2007 with the disk i purchased. My computer will not pick it up though. I know the cd works because I tried it on another computer but didnt intsall it. That computer read the disk. My computer will not. any help? desperate need
View 1 Replies View RelatedHi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedWe had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedHi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedDoes anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks
Hi,
I have SQL server 2000 client machine on my XP desktop which worked fine
until yesterday.
Yesterday, I tried to set up client access (a tool from IBM to access AS400) unsuccesfully. Since ever, Each time I try to open a table in enterprise manager, I get the following error message
"The query cannot be executed because some files are either missing or not
registered. Run setup again to make sure the required files are registered".
While when I issue a query in analyzer it works fine.
I did that several times without success. Even, I removed the whole SQL 2000
setup, rebooted my machine, ran set up again for client tools which gave the
same result. Also, I re-setup MDAC2.6 SP2 but no way.
Which files are corrupted ?and I don't understand after doing all that,
setup goes smoothly without indicating any errors, but still when you open a
table in enterprise manager, it gives the same error.
Thanks in advance
Hi,
Using MS SQL Server 7. When I go into a table in design view and order by date created, it only orders on the day and not the date (Enterprise Manager) e.g.
29/08/1981, 11/12/2004, 31/12/2003
should be
11/12/2004
31/12/2003
29/08/1981
but it's this instead
31/12/2003
29/08/1981
11/12/2004
Please help.... is this a bug
Hi,
My Question is regarding the Query Analyzer.
When we click on the Query Analyzer Shortcut, it will prompt for a user id and password.but when we expand the databases node from EM and clicks on Tools->Query Analyzer Menu, after selecting a database node, the QA does not prompt for the user id and password. Can any one explain this behaviour of QA..
I am using Mixed mode authentication for my db server.
Hi All,
When I view the database properties using Enterprise Manager, some of the databases on the server are reporting that there is zero space available while others have space available. Does anybody know why?
Does anyone know where I can get a copy of Enterprise Manager? I have the trial copy of 2000, but I need to administer data on a SQL 7 server, and I cannot create stored procedures, add users, or create DTS packages in 2000 that will work on SQL 7.
Thanks!
Is it possible to add custom columns to the design table interface.
For example could I add custom column for some data on want to store under a table column. I am used to vb.net and I am able to add custom properties to a control. Is this type of customization possible for SQL Server. Is it possible to add a custom tab to the tab control where columns are located at the bottom of the designer?
I installed SQL Server Developer Edition on Windows 2003 server for our sales force.
I don't want them to have acces to enterprise Manager and Query Analyser.
How to disable these?
Thx
Venu
Hi all, I am not over familiar with SQL, I am a VB Programmer, however I need to achieve the following.
In Enterprise Manager I have 2 tables A and B.
I need to get a column from A and then scan the entire contents of B to see whether the content, the value from the column in A actually exists in B. The get the next value from A and repeat the process.
Any Help Would be appreciated.
Many Thanks
MMC cannot open the file C:Program FilesMicrosoft SQL Server80ToolsBINNSQL Server Enterprise Manager.MSC
This may be because the file does not exist, is not an MMC Console, or was created by a later version of MMC. This may also be because you do not have sufficient rights to the file
Note: I had admini rights on PC, and Network, I am able to run Query Analyzer....
I can remote into other boxes and run Ent. Manager also.
NEED HELP PLEASE