Strange Problem With SSIS Script
Jun 19, 2007
I have added a few fields to a table and now when I try to populate it it bombs. It always stops on the same record even with different files and gives me the following error messages. Data looks fine.
[OLE DB Destination [6525]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
[OLE DB Destination [6525]] Error: There was an error with input column "Column 87" (6742) on input "OLE DB Destination Input" (6538). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
[OLE DB Destination [6525]] Error: The "input "OLE DB Destination Input" (6538)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (6538)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Destination" (6525) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Any help would be appreciated.
View 2 Replies
ADVERTISEMENT
Oct 10, 2007
I created a very simple SSIS package (it just updates a single row in a table). When I execute the package from the command line (using dtexec), it takes about a second to finish, as expected. But when I execute it using dtexec via xp_cmdshell, it takes about 91 seconds. When I use a SQL job to execute the package as an operating system type, it takes 91 seconds. Using a SQL job to execute it as a SSIS package takes again 91 seconds. It appears that something is causing a delay of about 90 seconds before the package actually gets executed. I tried changing the SSIS service account, but that didn't change anything. Why is executing the package through SS2005 different than executing it directly from the command prompt?
View 4 Replies
View Related
Sep 24, 2007
Hello,
I'm getting the following error running a package...
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message
ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
09/24/2007 15:00:00,Hourly Extract From OReSA,Error,0,INHSCTSTTOMVM82,Hourly Extract From OReSA,(Job outcome),,The
job failed. The Job was invoked by Schedule 7 (Hourly). The last step to run was step 1 (OReSA
Extract).,00:00:59,0,0,,,,0
09/24/2007 15:00:01,Hourly Extract From OReSA,Error,1,INHSCTSTTOMVM82,Hourly Extract From OReSA,OReSA
Extract,,Executed as user: INENVts_hia. hod call failed. End Error Error: 2007-09-24 15:00:58.93 Code:
0xC0047017 Source: dtProduceExtractFiles DTS.Pipeline Description: component "ole_srcExtractDB" (22) failed
validation and returned error code 0xC020801C. End Error Error: 2007-09-24 15:00:58.93 Code: 0xC004700C
Source: dtProduceExtractFiles DTS.Pipeline Description: One or more component failed validation. End Error
Error: 2007-09-24 15:00:58.93 Code: 0xC0024107 Source: dtProduceExtractFiles Description: There were
errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started:
3:00:01 PM Finished: 3:00:58 PM Elapsed: 57.75 seconds. The package execution failed. The step
failed.,00:00:58,0,0,,,,0
But it works on other machines and other SSIS packages are running ok on the offending box.
Any ideas?
Thanks in advance,
Tony.
View 4 Replies
View Related
Jan 28, 2008
Hi,
I have a strange problem scheduling SSIS package in SQL Server Agent.
An SSIS package which uses FTP to download a file from an FTP Server is scheduled through the SQL Server Agent to run every hour to look for the file and download it if exists.
- Iam using an Agent proxy which has all the necessary permissions to run the package.
- The package is protected as "EncryptsensitivewithUserKey".
It runs fine in schedule sometimes, ie it downloads the file and processes it alright.
But sometimes, very strangely , for an extended period while in schedule, it gives up an error saying -
- Unable to connect to FTP server using "Click_FTP_Location".
Click_FTP_Location - is the FTP connection manager used in the package.
Has anyone experienced this in any of their work??
We are also trying to see if there is something wrong with the FTP server itself.
Any comments/suggestions appreciated.
Thanks
View 5 Replies
View Related
May 18, 2006
This package which is a child package has been running successfully for quite some time now. All of a sudden we are getting these intermittant error messages. Does anyone have any ideas what to do or check for?
thanks
===========================
Error portion
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
====================================================
Complete child package log
Executing ExecutePackageTask: D:ssissrwpackagesSRW_ORACLE_SALES_FTBL.dtsx
Information: 0x40016041 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from the XML file "D:SSISconfigurationCONFIG-STAGE1.dtsConfig".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SSIS_Configurations]";"System Configuration Settings";".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SRW_SSIS_Configurations]";"SRW Main Configurations";".
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, REV GL SEGS [307]: component "REV GL SEGS" (307) has cached 780 rows.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get oper unit [813]: component "get oper unit" (813) has cached 12 rows.
Warning: 0x802090E4 at CF-DFT Oracle Sales Fact, get oper unit [813]: The Lookup transformation encountered duplicate reference key values when caching reference data. The Lookup transformation found duplicate key values when caching metadata in PreExecute. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get header txn type for IC flag [13685]: component "get header txn type for IC flag" (13685) has cached 768 rows.
Information: 0x4004300C at CF-DFT Oracle Sales Fact, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100484768 bytes, but was unable to swap out any buffers to relieve memory pressure. 83 buffers were considered and 83 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100484768 bytes.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 31 percent memory load. There are 8587960320 bytes of physical memory with 5869387776 bytes free. There are 2147352576 bytes of virtual memory with 1223802880 bytes free. The paging file has 12673945600 bytes with 9901600768 bytes free.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100483760 bytes, but was unable to swap out any buffers to relieve memory pressure. 162 buffers were considered and 162 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has started.
Information: 0x402090E0 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has ended.
Information: 0x40043009 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at CF-DFT Oracle Sales Fact, DTS.Pipeline: "component "TEMP OUTPUT" (998)" wrote 0 rows.
Task failed: CF-DFT Oracle Sales Fact
Warning: 0x80019002 at SRW_ORACLE_SALES_FTBL: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CF-EPGT SRW_ORACLE_SALES_FTBL
Warning: 0x80019002 at CF-SQC Facts: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SRW_MAIN: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SRW_Main.dtsx" finished: Failure.
View 9 Replies
View Related
Sep 7, 2007
I have three machine:
S: Running SQL Server Express
V: Running SSIS package in VS.Net
F: Shared folder host excel files
And an openrowset SQL statement: select * from openrowset(..... \Fexcel.xls....). This statement can be run in SS management studio connecting to S using my Windows logon(integration security) without any problem.
However, the same SQL running inside SSIS package (integration security using my Windows account) get the following error:
Error: 0x0 at Check headers: OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "The Microsoft Jet database engine cannot open the file '\Fexcel.xls'. It is already opened exclusively by another user, or you need permission to view its data.".
Error: 0xC002F210 at Check headers, Execute SQL Task: Executing the query "....openrowset....." failed with the following error: "Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
(My Windows account is administrator of Windows and sysadmin or SQL Sever Express on S)
View 1 Replies
View Related
Jun 7, 2007
I have a SSIS package that is run from one job, nowhere else. The package has TransactionOption NotSupported.
In the SSIS package I first have a sequence container that has TransactionOption Required (Serializable). The sequence container contains several Execute SQL tasks that access the same SQL Server 2005 database. The Execute SQL tasks have TransactionOption supported / Serializable. The first SQL statement is:
select p.column_name
from table_name p with (XLOCK, ROWLOCK)
where p.second_column_name = 'COLUMN_VALUE'
After this there are a couple of SQL tasks, and finally a task containing the following SQL:
select p.third_column_name
from table_name p
where p.second_colomn_name = 'COLUNM_NAME'
The idea is that the first query exclusively locks the row in the table_name-table for mutual exclusion purposes, i.e. so that if for some reason the SSIS package would be executed simultaneously two or more times, only one package execution could lock the row and proceed and the other executions will have to wait. There's an index on column second_column_name in the table to avoid the select locking other rows in addition to the required row.
Some questions:
1) Is it so in my setup that when SSIS runtime executes the sequence container it creates a transaction in the beginning of the sequence container and commits the transaction in the end of the sequence container? And in my setup the Execute SQL tasks in the sequence containar are executed under the same transaction?
2) I have a problem that the second query sometimes gives this error:"ErrorCode: -1073548784. ErrorDescription: Executing the query "XXXXX" failed with the following error: "Transaction (Process ID 73) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly."
The 1st query has locked the row for the transaction. How can the second query be deadlocked, shouldn't the transaction have a lock on the row? I'd understand if the 1st query failed sometimes, but don't understand how the 2nd quey can fail.
r,
JM
View 3 Replies
View Related
Jul 19, 2006
Hi everyone,
I€™m suffering a queer behaviour when I use BIDS. Concretely, when I open a dtsx from my project (it has 10 packages) many times Sequence Container and Data Flow tasks are invisible. I mean, its lines are not visible at all whereas its titles are. I mean, what you see is just a white box€¦
Then, I€™m gonna Data Flow layer and I have to do double-clik over the tasks and are visible but on Control Flow I don€™t see how to solve.
Curiously in our development and production server such behaviour doesn€™t happen (we are accessing by mean Terminal Server from our workstations)
How odd!. Everything is fine except this.
I want to remark you that such project has been copied from the server, this is, these packages are been built on the server
Thanks for your thougts or ideas,
View 5 Replies
View Related
Mar 6, 2007
I have a datasource where i assign the control Parameter value depending on whether theres a value in the querystring or a gridview selectedvalue is indeed selected.When i do this using a querystring it works fine, however, when i do it using gridView_selectedIndexChanged it doesn't work.Here's the code <asp:SqlDataSource ID="jobDetailsDS" runat="server" ConnectionString="<%$ ConnectionStrings:promanConn %>" SelectCommand="SELECT tblJobs.intJobId, tblJobs.intJobStaffId, tblJobs.intJobUserId, tblJobs.intJobCategoryId, tblJobs.strJobTitle, tblJobs.strJobDesc, tblJobs.strJobNotes, tblJobs.dateJobLogged, tblJobs.dateJobDeadline, tblJobs.dateJobCompleted, tblJobs.intJobPriorityId, tblJobs.strJobSolution, tblJobs.boolJobCompleted, tblPriority.priorityName, tblPriority.id, tblPriority.priorityOrder, tblStaff.staffName, tblStaff.id AS staffID, tblProblemCategoriesLookup.strProblemCatName, tblProblemCategoriesLookup.intProblemCatId, tblStaff_1.id AS Expr1, tblStaff_1.staffName AS UserName FROM tblJobs INNER JOIN tblPriority ON tblJobs.intJobPriorityId = tblPriority.id INNER JOIN tblStaff ON tblJobs.intJobStaffId = tblStaff.id INNER JOIN tblProblemCategoriesLookup ON tblJobs.intJobCategoryId = tblProblemCategoriesLookup.intProblemCatId INNER JOIN tblStaff AS tblStaff_1 ON tblJobs.intJobUserId = tblStaff_1.id WHERE (tblJobs.intJobId = @intJobId)" InsertCommand="INSERT INTO tblJobs(intJobStaffId, intJobUserId, intJobCategoryId, strJobTitle, strJobDesc, strJobNotes, dateJobLogged, dateJobDeadline, intJobPriorityId, boolJobCompleted) VALUES (@intJobStaffId, 56 , 39, @strJobTitle, @strJobDesc, @strJobNotes,{ fn NOW() }, { fn NOW() }, @intJobPriorityId, 0); "> <SelectParameters> <asp:Parameter Name="intJobId" Type="int32" /> </SelectParameters> <InsertParameters> <asp:Parameter Name="intJobStaffId" Type="Int32" /> <asp:Parameter Name="strJobTitle" Type="String" /> <asp:Parameter Name="strJobDesc" Type="String" /> <asp:Parameter Name="strJobNotes" Type="String" /> <asp:Parameter Name="intJobPriorityId" Type="Int32" /> <asp:Parameter Name="intJobUserId" Type="Int32" /> </InsertParameters> </asp:SqlDataSource>Code Behind ElseIf dest > 0 Then jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.InsertParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") gvActiveJobs.Visible = "False" End If End Sub Protected Sub gvActiveJobs_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles gvActiveJobs.SelectedIndexChanged gvActiveJobs.Visible = "False" jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.InsertParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue End Sub I also debugged and checked the value of gvActiveJobs.SelectedValue and it is what i was expecting but its still no good.Can anyone help?ThanksMatt
View 2 Replies
View Related
Nov 19, 2001
I moved a table from one file group to another file group. After moving the table the row count show 0 but when I open the table it’s returning all the rows. Is something wrong with the table? Do I have created a cluster index and drop on the table?
View 1 Replies
View Related
Aug 2, 2006
Hi,
I have table in my db thats used as a temporary table. At the end of the day it contains thousands of records which get summarized then all are deleted. I recently moved the application over to a new server with pretty much the same hardware config and noticed a big performance hit when running queries on this temp table (455 milliseconds as opposed to 1) In short, the fix was dropping the table and re-creating it.
Anybody know how this could be? I know that even if you delete records from a table, the table still seems to retain its physical size on the hard drive, could this have something to do with it?
Thanks
View 3 Replies
View Related
May 4, 2004
CREATE TABLE #users(users varchar(50),pasw varchar(50),title varchar(50))
insert into #users select 'test','abcdef','ceo'
SELECT * FROM #users
alter table #users alter column pasw nvarchar(50)
update #users set pasw=pwdencrypt(pasw)
SELECT * FROM #users
What happens to the TITLE column?
I had a table like the above with users and passwords in the Production DB. The password column had VARCHAR type. I changed it to NVARCHAR and encrypted the passwords. When i executed the SELECT *, the title column appeared like this. :eek:
If i query the table by column names instead of * i see the correct values. I couldn't understand what behaviour is it.
Howdy!
View 7 Replies
View Related
May 22, 2008
Hi Experts,
Am able to restart my local sql server using a login which dont have a sysadmin privileage.This login only have access to a particular database .Its only having datareader and datawriter as DB roles but still am able to restart the server.Please help
TIA
RKNAIR
View 5 Replies
View Related
Aug 3, 2006
I am using c# and ASP.NET 2 and I am getting a very strange error. I
have a field called CompanyID in SQL Server 2005, and it allows null
values in it. When this CompanyID is not NULL, ie for example it is
202, then when i press the update button it allows me to update
perfectly in the database. However if the CompanyID is NULL,
and I try to update the companyID, to lets say 202, the application
just crashes with the following message:- System.InvalidCastException: Object cannot be cast from DBNull to other types. I tried to set some breakpoints in the application to debug, however it does not even pass through these breakpoints! Any ideas on what the problem can be or how I can debug? Thanks for your help and time Johann
View 6 Replies
View Related
Oct 3, 2006
This is the actual statement displayed from Response.Write in classic ASP. INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '06-012497',TaskNum,TaskDesc,TaskMemo,Account,'2006-Oct-3',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum = '000002' There are 4 records returned from the SELECT part of the statement. In some situations, 4 records are inserted to WOTasks table, in others, only 1 record is inserted. I can't find out why 1 record, instead of 4, record is inserted. A form page submits the form to the save page using post method. The above statement is contained in the save page. When one of the form textbox is filled, 1 record is inserted. When the textbox is not filled, 4 records are inserted. You may think the textbox has something to do with the behaviour. I also think so but the content of the textbox does not affect the sql statement. In both cases, the insert statement is the same. In the actual codes, only strings in quotes are variables and the rest are hardcoded. When I run the statement in SQL Server, 4 records are affected. No such problem when connected with Access.The actual code belowSub AddTask(ByVal proc, ByVal wonum) Dim sSQL sSQL = "INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '" & wonum & _ "',TaskNum,TaskDesc,TaskMemo,Account,'" & curDate & "',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum='" & proc & "'" 'Response.Write sSQL:Response.End conn.Execute sSQL, , 128 End Sub
View 2 Replies
View Related
Jan 20, 2008
Hi there I have this statement I have written as follows:strCommand = "SELECT * FROM tblstock WHERE Type='"&Statement &"' AND Description like'"&criteria &"%' OR Tag like'"&criteria &"%'OR Location like'"&criteria &"%' OR LAN like'"&criteria &"%' OR RAM like'"&criteria &"%' OR CD like'"&criteria &"%' OR OS like '" &criteria &"%' OR SN like'" &criteria &"%' OR DeviceStatus like'" &criteria &"%' ORDER BY " &sSortStr The variable "Statement" is passed into the sub as "PC" which means only records of type "PC" should be displayed along with any other criteria. The issue I'm having is that when I specify criteria I'm also recieving other types eg "Cameras" if they contain any of my criteria.. I can't understand how because in the statement I tell it only to display records of type "PC".. Anybody know what I'm doing wrong? Thanks
View 3 Replies
View Related
Feb 1, 2008
I've done a new tabel that insert the UserId that in a uniqueidentifier get from Membership.GetUser().ProviderUserKeySo if I want to make a select statement threw storedprocedure in codebehind it runs as it shouldCode behindDim GetCustomersCars As CustomerCarByUserId = New CustomerCarByUserId MyCars.DataSource = GetCustomersCars.CarByUserId(Membership.GetUser().ProviderUserKey)MyCars.DataBind() But in when I use ObjectDataSource it fails<asp:ObjectDataSource id="ObjectDataSource1" runat="server" selectmethod="CarByUserId" typename="CustomerCarByUserId"> <SelectParameters> <asp:Parameter defaultvalue="Membership.GetUser().ProviderUserKey" name="UserId" type="Object" /> </SelectParameters> </asp:ObjectDataSource>I've tried with Membership.GetUser().ProviderUserKey.ToString(), but that doesnt work. Error message:InvalidCastExceptionI connect to the same source in both cases.Any one with an Idee ?
View 1 Replies
View Related
May 13, 2008
So we currently are running a SQL 7 Server, which hopefully we will be updating this year but untill then we're stuck. I've got a web app using ASP.NET 2.0 and on occasion I get this error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - Only one usage of each socket address (protocol/network address/port) is normally permitted.) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open()
View 2 Replies
View Related
Mar 25, 2004
I Some sql that it keeps throwing the following error
SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Here is the sql
UPDATE dbo.temptable
SET code = 'MM'
FROM dbo.temptable T
JOIN dbo.Item I WITH (NOLOCK)
ON T.ProductID = P.ProductID
JOIN dbo.cars C WITH (NOLOCK) ON I.ModelID = C.ModelID
JOIN dbo.carmakes CM WITH (NOLOCK) ON CM.MakeID = C.MakeID
JOIN dbo.CarDealerMakes CDM WITH (NOLOCK)
ON CM.MakeID = CDM.MakeID
WHERE T.ProductID NOT IN (
SELECT distinct A.ProductID
FROM dbo.Action A WITH (NOLOCK)
JOIN dbo.ActionPurchases AP WITH (NOLOCK)
ON A.ActionID = AP.ActionID
WHERE A.CustomerID = 2
UNION
SELECT distinct A.ProductID
FROM dbo.Action A WITH (NOLOCK)
JOIN dbo.ActionServices S WITH (NOLOCK)
ON A.ActionID = S.ActionID
WHERE 2 = A.ProductID)
That sql will run on windows 2000 but it will not run on windows 2003.
I have the latest service pack.
Has anyone ever come across this before or have and suggestions ?
View 2 Replies
View Related
Jul 9, 2005
I have a query as follow:
SELECT @resRate = (SELECT resRate FROM ProjectAssign WHERE proNo = (SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee) ) )
the definition of table Timer_cust contains refNum(int), projNo(varchar) and projName(varchar).Timer_cust table doesn't contain column username. So this query shoud generate a runtime error. however it works fine without error.But if I run SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee)A runtime error message appears.Why?
View 3 Replies
View Related
Aug 13, 2001
Can any one tell me why sp_helpindex shows several indexes though there is only one index on the table. When i use Enterprise manager it shows only one index..Any idea..is it a bug ..do I need to apply latest service pack ?
Here is the output shows
IX_tbl_ncf_bo
_WA_Sys_Deal_No_2902ECC1
_WA_Sys_fwddate_2902ECC1
_WA_Sys_deal_type_2902ECC1
_WA_Sys_RegionID_2902ECC1
_WA_Sys_CompID_2902ECC1
_WA_Sys_To_Include_2902ECC1
_WA_Sys_SvcChoice_2902ECC1
_WA_Sys_UtilityID_2902ECC1
First one is actual index that I created, remaining
View 1 Replies
View Related
Jul 31, 2000
i have four separate jobs which run at scheduled time daily..out of which one job has run properly and the other three have not run at all(there is no details of it in "View job history")for only one day in between..again from the next day all the four jobs are running properly.what could be the reason for the three jobs not running on a particular day?(The jobs were scheduled between 3 and 4am in the morning..so nobody would be using the system at that time and the system was definitely up at that time as that one job has run)
i could afford to have such strange behaviour in future as the jobs are important and should run daily.any ideas by which i could make sure all four jobs run daily?
View 6 Replies
View Related
Feb 6, 2001
We've been finding some strange indexes in our SQL 7 database. They are not indexes we put in, but seem to be system generated. They always have the format "hind_" and then a series of numbers and underscores. Most of the time they replicate indexes we already had in place. The strangest part is that in some cases they seem to be generating multiple clustered indexes on the same table. A previous question recieved an answer saying that they were statistical indexes. Could someone shed a little more light on what these are, where they came from, and how I can prevent them from coming back? Our queries usually take much longer on tables with these "rogue" indexes on them. Thanks.
View 1 Replies
View Related
Mar 13, 2003
Why is it so?
select len("Test")
--returns 4
select len("Test ")
--returns 4
select len(" Test ")
--returns 7
why not all 4 ?
why not 4,11,14?
View 6 Replies
View Related
Nov 29, 2005
I have a SP that usually works fine (0-16 CPU time, 40 ms Duration), but from time to time the server hangs with apparently no reason. The SP has a lock timeout set to 500, so it should abort if a lock timeout error (1222) occurs but it doesn't. The Profiler reports very long execution time (over 30 sec), and because of that all other SP calls are blocked, 'cause the transaction opened by the first sp execution is not finished yet.
Any other attempts to identify other blocking queries did not show me anything suspect (sp_lock, dbcc opentran) other then the usual blocked chain. I'm starting to think about an IO bottleneck, or IO failure, that could block the disk access and cause the delay. The status of RAID 5 is healthy.
The server is used as storage system for a website (approx. 2000 concurrent users), and occasionally I noticed an ASP queue, but this strange behavior occurs even during the peak-off hours.
Any thoughts ?
-----
HP Server - 2 CPU @ 3,4 ; 4 GB RAM; SCSI - RAID 5
Windows 2000 Advanced Server - SQL Server 2000 SP4
View 1 Replies
View Related
Apr 24, 2006
I have a table. It shows "Rows: 2" when I open it in the table properties dialog. But there is no record in the table when I open it from Open Table -> Return All Rows.
I don't understand how this can happen. Any help is appreciated.
Thanks.
View 6 Replies
View Related
Nov 19, 2006
Hello
I have one PC with SQL server 2000 and I am working on one database called TaxReg but today I found it gray and (suspect) beside it
could you please tell what is the problem and how to fix it ?
View 1 Replies
View Related
Jul 16, 2007
...the Access forum...so many bad practices
Like this one
http://www.dbforums.com/showthread.php?p=6284279&posted=1#post6284279
View 12 Replies
View Related
Mar 2, 2004
I received some strange results after typing the wrong column in a subselect using IN. I've been puzzling over it a while now and can't quite figure out why it is doing what it is.
Here's an example of what is happening.
use northwind
go
select * from Customers where CustomerID in
( select CustomerID from Employees where 1 = 0 )
Now, there is no customerid on the Employees table, so running the subquery alone will produce an error. However when the full query above is run, all rows in the customer table are returned.
It was my understanding that the inner querry is evaluated first, and the results used by the outer query. I'm having a hard time seeing how this query is going anywhere.
Any ideas?
View 13 Replies
View Related
Mar 24, 2004
I have a simple query which ran fine for the last 12 months. All of sudden, it's dragging and couldn't finish in 6 hours. I tried to trace down where the problem resided but it's such a simple query there is nothing to break down. By chance, I commented out all the column names and replace with ' SELECT * ', the query finished in 14 seconds. Once I replace the * with column names, it ran over 20 minutes and I had to cancel it because it doesn't seem to be returning any results. Any help would be appreciated. Thanks.
View 11 Replies
View Related
Apr 20, 2004
Hi,
When I use only 2 dimensions linked with my fact and process the cube, I get the correct results for my measure (I have checked this will all
possible combinations of the 2 dimensions)....
However when I add more dimensions, link them with the fact, process the cube, and check the same results I get totally different totals for my
measure :confused:
I realize that ideally I should post the DDLs for all dimensions etc.
but to start with can anyone think of what could be causing this.
I'll appreciate your help.
Thanks.
P.S
Exhausted :(
View 1 Replies
View Related
May 4, 2004
NO MIRACLES !!!!!!!!!!!!!!
(see point number 8 in Brett's list)
View 14 Replies
View Related
Apr 9, 2008
SQL profiler displays duration 70610. But textdata doesn't display anything. Anyone know why?
View 3 Replies
View Related
