I have a query as follow: SELECT @resRate = (SELECT resRate FROM ProjectAssign WHERE proNo = (SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee) ) ) the definition of table Timer_cust contains refNum(int), projNo(varchar) and projName(varchar).Timer_cust table doesn't contain column username. So this query shoud generate a runtime error. however it works fine without error.But if I run SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee)A runtime error message appears.Why?
hi there , i'm using sql server 2005 express and i have some problems with the two of my tables :), iwant to query both of my tables but the table entries are not in an equal count of rows for example:
incoming(table) outgoing(table)
money date corp money date corp 15 1,1,2006 ar 17 1,1,2006 ar 25 1,2,2007 ar 21 2,2,2007 es 35 2,2,2007 es 6 3,3,2007 ar
in this example the first table has more rows but the opposite is possible in my tables because this is an (account extract) query and here's my problem: first i used the "select incoming.money as m1,incoming date as d1,incoming.corp as c1,outgoing.money as m2,outgoing.date as d2,outgoing.corp as c2 from incoming left outer join outgoing on incoming.corp=outgoing.corp where incoming.corp='ar'(or don't use the where eliminating)" any way i couldn't get the correct results, then i used the (union all) select , the result was ok but the results form is not what i want here's the form i want and is it possible to query to tables to get this? in this query i just wanted the elements with the corporation named 'ar' for example:
m1 m2 d1 d2 c1 c2
15 17 1,1,2006 1,1,2006 ar ar 25 null(or (0)) 1,2,2007 6 null(or (0)) 3,3,2007
is it possible to achieve this form(and may be any of the tables may have more rows than the other, it's not exact) , i am in a very difficult position :) and now i need your help , thanks anybody to think of helping me
select * from jobmaster where status in ('Active') and materialtypecode in (1,2) and unit='IMPERIAL' and superusercode='S051000014' order by controllercode,jobname
through ADO I got the error message:
Invalid column name controllercode
When I execute the same above query in MS SQL Query Analyzer it is working.
I am having in writing a simple select command........here's My ProblemI am using the ASP SQLDataSources in VS2005.... and my need is that i need to show Products details in a Gridview...... Actually through QueryString a StoreID is being fetched..... and the Products under those StoreID are shown..... if there is nothing in query string then it should show all the results... ........ It means that my querystring should be something like thisselect * from tblProducts where StoreID = <xyz>and <xyz> should be some thing that could show all the rows in that table ........ i mean that it should show all the possible results that can be shown through...select * from tblProducts
I have two pages that Im using the same query out of... one page returns results, the other page returns an error... SOMEBODY HELP!!! I just need a hint if nothing more!!!
The Error: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'WHERE'. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteReader() at Global.Default_Search(Object Sender, EventArgs e) in C:InetpubwwwrootChampionRealtyINFOprojecttrackingglobal.vb:line 206
The SQL Query:
SELECT PT_JobCat.JobCat, PT_Job.JobID, PT_Job.Created, PT_Status.Status, Offices.Name, Employees.First + ' ' + Employees.Last AS EmpName FROM PT_Job INNER JOIN PT_JobCat ON PT_Job.CatID = PT_JobCat.CatID INNER JOIN PT_Status ON PT_Job.StatusID = PT_Status.StatusID INNER JOIN PT_Assign ON PT_Job.JobID = PT_Assign.JobID INNER JOIN Employees ON PT_Assign.AgentID = Employees.ID INNER JOIN PT_Office ON PT_Job.JobID = PT_Office.JobID INNER JOIN Offices ON PT_Office.Office_ID = Offices.ID WHERE PT_Job.JobID=1
The SQL Query Output By ASP.NET: (When an error is produced on the trouble page)
SELECT PT_JobCat.JobCat, PT_Job.JobID, PT_Job.Created, PT_Status.Status, Offices.Name AS OfficeName, Employees.First + ' ' + Employees.Last AS EmpName FROM PT_Job INNER JOIN PT_JobCat ON PT_Job.CatID = PT_JobCat.CatID INNER JOIN PT_Status ON PT_Job.StatusID = PT_Status.StatusID INNER JOIN PT_Assign ON PT_Job.JobID = PT_Assign.JobID INNER JOIN Employees ON PT_Assign.AgentID = Employees.ID INNER JOIN PT_Office ON PT_Job.JobID = PT_Office.JobID INNER JOIN Offices ON PT_Office.Office_ID = Offices.ID WHERE JobID=1
The Trouble Page:
Public Sub Default_Search(ByVal Sender As Object, ByVal e As EventArgs) dim NeedAnd as boolean = False dim strSQL as string = "SELECT PT_JobCat.JobCat, PT_Job.JobID, PT_Job.Created, PT_Status.Status, " & _ "Offices.Name AS OfficeName, Employees.First + ' ' + Employees.Last AS EmpName " & _ "FROM PT_Job " & _ "INNER JOIN PT_JobCat ON PT_Job.CatID = PT_JobCat.CatID " & _ "INNER JOIN PT_Status ON PT_Job.StatusID = PT_Status.StatusID " & _ "INNER JOIN PT_Assign ON PT_Job.JobID = PT_Assign.JobID " & _ "INNER JOIN Employees ON PT_Assign.AgentID = Employees.ID " & _ "INNER JOIN PT_Office ON PT_Job.JobID = PT_Office.JobID " & _ "INNER JOIN Offices ON PT_Office.Office_ID = Offices.ID " & _ "WHERE " dim C as New SQLCommand(strSQL, Conn) dim DR as SQLDataReader If txtJobNum.Text <> Nothing Then strSQL += "JobID=" & CInt(txtJobNum.Text) & " " NeedAnd = True End If If ddlJobType.SelectedItem.Value <> Nothing Then If NeedAnd Then strSQL += "AND " strSQL += "CatID=" & ddlJobType.SelectedItem.Value & " " NeedAnd = True End If If txtCreated.Text <> Nothing Then If NeedAnd Then strSQL += "AND " strSQL += "PT_Job.Created LIKE '" & txtCreated.Text & "' " NeedAnd = True End If If ddlStatus.SelectedItem.Value <> Nothing Then If NeedAnd Then strSQL += "AND " strSQL += "PT_Job.Status=" & ddlStatus.SelectedItem.Value & " " NeedAnd = True End If If ddlAssign.SelectedItem.Value <> Nothing Then If NeedAnd Then strSQL += "AND " strSQL += "Employees.ID=" & ddlAssign.SelectedItem.Value & " " NeedAnd = True End If If ddlOffice.SelectedItem.Value <> Nothing Then If NeedAnd Then strSQL += "AND " strSQL += "Offices.ID=" & ddlOffice.SelectedItem.Value & " " NeedAnd = True End If
response.write(strSQL)
Conn.Open Try DR = C.ExecuteReader If DR.Read Then rptResults.Datasource = DR rptResults.Databind End If DR.Close Catch Exc as Exception 'ErrorAlert(Exc, strSQL) response.write("<p>" & Exc.ToString.Replace(Environment.NewLine(), "<br />") & "</p>") End Try Conn.Close
End Sub
The Page That Works:
Sub LoadResults(ByVal Sender As Object, ByVal e As EventArgs)
' Clean up some things... txtError.Visible = False txtError.Text = Nothing
' Create database interaction objects... dim Conn as Object dim C as Object dim DR
' Set database interaction objects... Select Case CInt(DBType.SelectedItem.Value) Case 0 Conn = New SQLConnection(txtConnString.Text) C = New SQLCommand(txtSQL.Text, Conn) Case 1 Conn = New OleDbConnection(txtConnString.Text) C = New OleDbCommand(txtSQL.Text, Conn) Case Else txtError.Visible = True txtError.Text = "Whoa... wierd error d00d... o.0" End Select
' Open the database for reading... Conn.Open
Try
' Load the datagrid with any information retrieved... Select Case CInt(CommType.SelectedItem.Value) Case 0 DR = C.ExecuteReader() dgResults.Datasource = DR dgResults.Databind DR.Close Case 1 C.ExecuteNonQuery() Case Else txtError.Visible = True txtError.Text = "That's some funky ****..." End Select
Catch Exc As Exception
' Make the error viewable so we know what went on... txtError.Visible = True txtError.Text = Exc.ToString
End Try
' Close the connection to the database... Conn.Close
First off, let me get my disclaimer out of the way - I'm a relative newbie at this SQL lark, so please ignore the kludgy-ness of this code etc. Thanks ;-)
DECLARE issue Cursor scroll FOR -- Create the cursor select articleIssue, articleDate from cr_newsletterArticles where newsletter = @newsletter -- Which Newsletter order by articleIssue desc ;
open issue -- Open the cursor SET @previssue = 0 -- Set our comparison variable to 0
FETCH next FROM issue -- Grab the first recordset from the cursor into @issuecounter, @date -- Stick it into our variable WHILE @@fetch_status = 0 -- While we're not at EOF begin -- begin if @issuecounter != @previssue BEGIN -- begin insert into @issues(issues,dates) values(@issuecounter, @date) SET @previssue = @issuecounter -- set comparison variable to issuecounter END fetch next from issue -- Grab the next recordset into @issuecounter, @date END -- End CLOSE issue -- close cursor deallocate issue select * from @issues GO
When I run this query in Query Analyser, it seems to work fine. IE. I get a table returned with the correct values. However, when I try and get this data into ASP via the old objRS.open "EXECUTE stored procedure <value>" command, no data is returned...
I'm not sure if this is an ASP problem, or a SQL problem... So, I altered the query slightly, and instead of a temporary table, I used a static one in the database, and it still didn't work - even though when I open the table in Enterprise manager the content is there...
Also, if I run the query via an ASP objCommand.execute "procedure <value> " and then use objRS.open "SELECT * from table" then it pulls the data in properly then...
If I was dealing with millions of recordsets in my original table, then I can understand that maybe the ASP isn't waiting long enough for SQL to return its final table. But I'm currently only dealing with about 50... I'd rather use the temporary table route rather than static incase of multiple hits at the procedure at the same time...
Any ideas? Please go easy - I refer you back to my disclaimer ;-)
I have a query like below .. if i add where Served = 1 , the query takes foreever... if i remove it, it takes only 6 sec...
I am not sure why this is hapening?
select distinct a.Episode_Key, case when ag.Category IN ('ASMI', 'COOC', 'SPCL') then 'SMI' when ag.Category = 'SEDC' then 'SED' when ag.Category = 'ACCA' then 'SA' when ag.Category like 'CGA%' then 'Gam' end as [Category], ag.Agreement_Type_Name as [Agreement], p.ServiceProvider, s2.Served from dbo.Assessment a INNER JOIN ( select distinct Episode_Key, p.ServiceProvider, max(CSDS_Object_Key) as [Sequence] from dbo.Assessment a INNER JOIN dbo.CD_Provider_Xref p ON a.Provider_CD = p.Provider_CD where Creation_DT >= '07/01/2007' and Reason_CD = 1 group by Episode_Key, p.ServiceProvider ) as s1 ON a.CSDS_Object_Key = s1.Sequence INNER JOIN dbo.CD_Provider_XREF p ON a.Provider_CD = p.Provider_CD INNER JOIN dbo.CD_Agreement_Type ag ON ag.Agreement_Type_CD = a.Agreement_Type_CD LEFT OUTER JOIN ( select distinct Episode_Key, p.ServiceProvider, 1 as [Served] from dbo.Encounters e INNER JOIN dbo.CD_Provider_Xref p ON e.Provider_CD = p.Provider_CD where Encounter_Begin_DT between '01/01/2008' and '01/31/2008' and Procedure_CD is not null and Encounter_Units > 0 ) as s2 ON a.Episode_Key = s2.Episode_Key and p.ServiceProvider = s2.ServiceProvider ????---where Served = 1 group by a.Episode_Key, ag.Agreement_Type_Name, p.ServiceProvider, Served, case when ag.Category IN ('ASMI', 'COOC', 'SPCL') then 'SMI' when ag.Category = 'SEDC' then 'SED' when ag.Category = 'ACCA' then 'SA' when ag.Category like 'CGA%' then 'Gam' End
Hi all,Using SQL Server 2000, SP4.I have a table of street names (Rua) whose ids (cod_rua) are foreignkeys into a consumer table (Consumidor). It turns out that the "Rua"table has many unused records which I'd like to wipe out. For instance,there are some 2800 unused records in the "Rua" table, and only some200 records actually being used by the "Consumidor" table (which,itself, has some 5000 records).Attempting to find the unused records, I issued the following query:a)SELECT COD_RUA FROM RUAWHERE COD_RUA NOT IN (SELECT COD_RUA FROM CONSUMIDOR)To my surprise, the query came out empty. But the following queryshowed the 200 or so records which *are* being used:b)SELECT COD_RUA FROM RUAWHERE COD_RUA IN (SELECT COD_RUA FROM CONSUMIDOR)I've found two solutions for the query to list the records *notexisting* in the Consumidor table:c)SELECT COD_RUA FROM RUAWHERE COD_RUA NOT IN (SELECT COD_RUA FROM CONSUMIDORWHERE COD_RUA IS NOT NULL)d)SELECT COD_RUA FROM RUAWHERE COD_RUA NOT IN (SELECT COD_RUA FROM RUAWHERE COD_RUA IN (SELECT COD_RUA FROM CONSUMIDOR))I know that there are many other possible solutions to the query(including left joins), but what I don't understand is why the query a)failed.Can some of you, oh mighty gurus, enlighten me?For the record, here's how both tables are (partially) declared:CREATE TABLE Rua (Cod_Rua int NOT NULL ,Rua varchar (35) NULL ,-- ...-- other unrelated fields-- ...CONSTRAINT Pk_CodRuaPRIMARY KEY (Cod_Rua))CREATE TABLE Consumidor (Cod_Consumidor int NOT NULL ,Cod_Rua int NULL ,-- ...-- other unrelated fields-- ...CONSTRAINT Pk_CodConsumidorPRIMARY KEY(Cod_Consumidor) ,CONSTRAINT Fk_CodRua_ConsumidorFOREIGN KEY (Cod_Rua)REFERENCES Rua (Cod_Rua))Regards,Branco Medeiros
Hi everibody,it's the first time i post on this newsgroup. I'm Stefano from Milano,italy.I'm a beginners with Sql2000. My problem is this.I run a View using enterprise manager and after less then 20 second it goesin error time out. I run this view using a VB application and the errorcomes again .When i run it with Query Analyzer after 50 seconds it give methe right result.i've tried to change the value of querytimeout using sp_configure with thesame bad result.i've tried to change the ado command timeout in visul basic but stilldoesn't work.any suggest ?Thanks in advance
Last week we've made some modifications to our 20 GB database(with 2 huge tables (around 30 million rows)): 1. we've created 8 filegroups on 8 physical disks with RAID 1+0. In each of them we have one big table and others small tables unrelated with the big table. We've also created a filegroup for the nonclustered indexes from those big tables. 2. The Server is running SQL Server 2000 with SP3a 3. We've reindexed the database, updated statistics on all tables Now, we have a SP that on the old configuration took about 20 min to complete. But now, on our new configuration with the modifications listed above it's taking about 3 HOURS. This is the SP's body: is calling a function: create proc X as begin Select dbo.myfunc(mytable.field) from mytable end
The function used in select statement is querying those 2 huge tables.
If the select statement is runned for only one record it's done instantly, but for 20000 recs it is taking almost 3 hours. I must specify that also the function is running instantly, but in that select statement something is happening and we don't know what!!!
If you have any ideeas on what to do or what to check Thanks a lot Dan
I am seeming strange results with a query. I have two tables, lets call them Table1 and Table2. Table1 has an ID field, Table2 does not have an ID field. To be sure I wasn't blind, the query
'SELECT ID FROM Table2'
returns: Invalid column name 'ID'. OK. Now when I run the query
'SELECT * FROM Table1 WHERE ID IN (SELECT ID FROM Table2)'
it returns all the records from Table1.
What gives? Is this a bug, or am I missing something?
Jezemine, No, the number of reads is approximately the same. I can also confirm the disk read speed is the same on the test vs. production server. Update stats is run regularly on the production server - as I test, I ran sp_updatestats and then immediately ran the query a few times but it didn't affect the duration. Apart from the durations in the profiler traces, I can't see any differences. Clearly, something is causing the increased duration on the prod server but I don't know where to look to find it. It's definitely within SQL Server 2000.
I have been trying to get this code work, but I could not. Every thing seems going well. However, The result of running the sql query is strange. It shows the field names twice. Eg:) if you have a table called "newtable" that has two fields[Custnumber, Custname], you will get somthing like this [Custnumber, Custname Custnumber, Custname]. I have tried many times, but I couldn't fix it.
Sub Page_Load(sender As Object, e As EventArgs) handles Mybase.Load
if not page.Ispostback then
try Sqlconnection = New Sqlconnection (connectionString)
querystring = "SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNs WHERE TABLE_NAME = 'Newtable'"
SqlCommand = New SqlCommand(queryString, Sqlconnection)
We have SQL server 7 installed. And we experiencing the performance problem. When I tried to solve this problem I have found the interesting thing: We have the table S_EVT_ACT with the non clustered index S_EVT_ACT_F4 created on [OWNER_PER_ID], [APPT_REPT_FLG] fields and another clustered one S_EVT_ACT_M4 created on [ROW_STATUS], [OWNER_PER_ID] fields I use the next select statement and before run this statement I declare the variable @P1 - @P5 and set the values to them:
declare @P1 as char(1) declare @P2 as char(1) declare @P3 as char(1) declare @P4 as varchar(10) declare @P5 as char(1)
set @P1 = 'Y' set @P2 = 'Y' set @P3 = 'N' set @P4 = '1-K56' set @P5 = 'Y'
SELECT .. ... ... FROM dbo.S_EVT_ACT T1 --(index = S_EVT_ACT_F4) LEFT OUTER JOIN dbo.S_CONTACT T2 ON T1.TARGET_PER_ID = T2.ROW_ID LEFT OUTER JOIN dbo.S_OPTY T3 ON T1.OPTY_ID = T3.ROW_ID LEFT OUTER JOIN dbo.S_ORG_EXT T4 ON T1.TARGET_OU_ID = T4.ROW_ID LEFT OUTER JOIN dbo.S_EVT_ACT_X T5 ON T1.ROW_ID = T5.PAR_ROW_ID WHERE ((T1.ALARM_FLAG = @P1 OR T1.APPT_REPT_REPL_CD IS NOT NULL) AND (T1.APPT_REPT_FLG = @P2 AND (T1.CAL_DISP_FLG = @P3 OR T1.CAL_DISP_FLG IS NULL)) AND (T1.OWNER_PER_ID = @P4) AND (T1.TEMPLATE_FLG != @P5 OR T1.TEMPLATE_FLG IS NULL)) ORDER BY T1.CREATED
In this case Query Analyzer uses S_EVT_ACT_M4 index and the performance is bad!
But when I try to run the same statement and use hard code 'Y' instead of the variable @P2 the Query Analyzer uses the S_EVT_ACT_F4 index and performance is PERFECT.
Question: What the difference between using variable @P2 and hard code 'Y' in the select statement and how to configure SQL server to use the right index in the situation when I can't change the Select statement and use the hard coding?
Any Idea will be very Appreciated.
Dmitri Denejkine stssystems MS SQL Server DBA, MIS (514) 426-0822 ext. 2676
i have marked in bold the query in question ..whch gives me the the runtime error mentioned at the below , i double checked everything all the table names and the field names are correct so whats the problem , please anyone??im really stumped! if (Radio_Btn_Book.Checked == true) { string book_query = "update Issue_Book_Reserve I set I.Issue_Book_Reserve_state = 1 where I.Book_Id = Books.Book_Id and Books.Book_Name = '" + Session["Book_name"].ToString()+"'"; SqlCommand Cmd_book = new SqlCommand(book_query, con); con.Open(); Cmd_book.ExecuteNonQuery(); con.Close(); } ERROR: The column prefix 'Books' does not match with a table name or alias name used in the query.The column prefix 'Books' does not match with a table name or alias name used in the query.
Hi, TABLES (Association CONTAINS COLUMNS AssociationID), (Group CONTAINS COLUMNS GroupID, GroupName, AssociationID), (GroupMembers CONTAINS COLUMNS GroupID, GroupMemberID, UserprofileID, DateCreated, DateRemoved), (UserProfiles CONTAINS COLUMNS UserProfileID, UserID), (AllUsers CONTAINS COLUMNS UserID, FirstName, LastName) I am trying to write a query to collect information about from the tables. I need to collect all the Users who are not members of Group A in Association I. Note that Users can belong to more than one group and have more than one profile. I would appreciate it if you could help me figure out how to deal with this logic. Thanks in Advance
Hi I have a function which returns the periodId from the period table and the function is as follows: ALTER FUNCTION [dbo].[udf_Quarter] (@Date datetime) RETURNS int AS
BEGIN
DECLARE @month int SET @month = Month(@Date) RETURN CASE WHEN @month BETWEEN 1 AND 3 THEN 5 WHEN @month BETWEEN 4 AND 6 THEN 6 WHEN @month BETWEEN 7 AND 9 THEN 7 WHEN @month BETWEEN 10 AND 12 THEN 8 END END Which works fine but i want to do the following with it. We produce quarterly statements.. So the user comes in jan or the begining of Feb to upload and process and order Statements from 10/31 to 12/31 the the 4 quarter data.. So Is there a way i can check if the user orders the statement in between jan and feb it has to reture PeriodId 5.
I have three parameters called @rsLengthofservice, @rsLengthofServicematch and @rsLenghtofservicePS. How do i check if all the three parameters have the same value.. Any help will be appreciated.. Regards, Karen
Hi, I have this query SELECT o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join Plan cp on o.PlanId = cp.PlanId and o.CreatedByUserId = cp.UserId Inner Join User c on o.CreatedByUserId = c.UserId WHERE --cp.ClientId = @ClientId --AND o.OrderDate BETWEEN @StartDate AND @EndDate ORDER BY o.OrderId DESC Which gives the list of order from the start date to the end date..but it doesnt List the orders which are some mins apart. For eg. 16524/24/2008 10:48:05 AM4252840 16534/25/2008 10:15:42 AM378550 16544/25/2008 10:51:24 AM3147110 16614/25/2008 1:35:54 PM425045 16624/25/2008 2:30:43 PM4174387130 16634/25/2008 2:47:14 PM154825 16644/25/2008 2:49:10 PM265085 it listed order no. 1652 and 1654 but not 1653 and in the next 4 it didnt list 1663.. why is this happening.. I am using a reports in the report server. any help will be appreciated. Regards,Karen
my app contains one form (aspx) and it has different controls to be filled by user (textbox,radiobutton ..etc)it has one button which i want to use to pass values entered in these controls to other page and do some queries to sql server there (2nd page)Now the thing is ...my controls can have NULL values ...like user could enter just one parameter and hit button or user can fill 2 parameter and hit enter so on the other hand (2nd page) how should i query the database accordingly ....
I have some data that looks like this: field1(pk) field2 field3 563136 199535840A D2119562408 199615461C D2119562806 199748610A D2119547463 199748610A D2368562278 200255598A D2368562286 200255598A D2468 Field2 can have the same value. What I need is to return all records where field3 is not 'D2468' ever for field2. So with the above data, I'd want the first 4 records returned, but not 5 and 6 because for those field2 is the same value and in 6, field3 is 'D2468'. So, I can't simply say: SELECT a.field2FROM table1 a inner join table2 b on a.field2 = b.field2 and a.field5 = b.field5where a.field3 not like 'D2468' because it will still return record 5. Can anyone help me with this? Thank you!
I need help here. I have two queries one on each server and one does not work the way it should be. Can some help me here in figuring out if both these queries are same or no. If there is any difference, what is causing that difference. Thanks
Query1: SELECT Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.CountyName,Shipment.Zip, Shipment.WarehouseCd, Phone FROM Orders INNER JOIN ((NewWarehouse INNER JOIN Shipment ON NewWarehouse.WarehouseCd = Shipment.WarehouseCd) INNER JOIN WarehouseCurrency ON NewWarehouse.WarehouseCd = WarehouseCurrency.WarehouseCd) INNER JOIN Warehouse ON (Shipment.CountryCd = Warehouse.CountryCd) AND (NewWarehouse.WarehouseCd = Warehouse.WarehouseCd)) ON Orders.OrderNum = Shipment.OrderNum WHERE BE = 5 AND AddressTy = 1 AND WarehouseCurrency.CurrencyCd ='USD' AND Active = -1 GROUP BY Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.CountyName, Shipment.Zip, Shipment.WarehouseCd, Phone ORDER BY Min(Shipment.OrderNum) DESC)
Query 2: (This is working) SELECT Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.Zip, Shipment.WarehouseCd, Shipment.Phone, Shipment.CountyName FROM ((Orders INNER JOIN (NewWarehouse
INNER JOIN Shipment ON NewWarehouse.WarehouseCd = Shipment.WarehouseCd) ON Orders.OrderNum = Shipment.OrderNum) INNER JOIN WarehouseCurrency ON NewWarehouse.WarehouseCd = WarehouseCurrency.WarehouseCd) INNER JOIN Warehouse ON (NewWarehouse.WarehouseCd = Warehouse.WarehouseCd) AND (Shipment.CountryCd = Warehouse.CountryCd) WHERE (((Orders.BE)=5) AND ((Shipment.AddressTy)=1) AND ((WarehouseCurrency.CurrencyCd)='USD') AND ((NewWarehouse.Active)=-1)) GROUP BY Shipment.CountryCd, Shipment.City, Shipment.State, Shipment.Zip, Shipment.WarehouseCd, Shipment.Phone, Shipment.CountyName ORDER BY Min(Shipment.OrderNum) DESC
I am sorry I am not that good in sql as some of you may be. Thanks.
I have 2 tables: Table1 has a field [Description](varchar) 100 Table2 has a field [IDDescription] int and field [Description] varchar(100)
In table 2 I have IDDescription store but some time also description wich is not store in table2 I need to pull all description (if it is from table2 or table1). How do I do this?
I have a query that need to do something like this.
About the data: --------------- I have a rules table which has got all the rules, and a log table that has the logs which says whether the rules are satisfied or not over a point of time.
select rules, sum(decode(status,'pass','1')) as passed, sum(decode(status,'fail',1)) as failed from rulestable,logstable where rulestable.logid=logstable.id
Lets say i have 2 tables. One called 'Leads' and the other called 'Sales_Reps'. When a new lead comes in would like to assign it to the sales rep who has the least number of active leads. If there is a tie, I'll just assign it alphabetically between the sales reps who are tied with the least.
Can someone point me in the right direction here? I would assume I'd need to do some sort of select count, but I'm not sure how to begin.
The newly generated column contains sequence numbers starting from 1 and the sequence should be resetted again to 1 whenever a new c3 value is encountered(for example when the c3 value changes from 101 to 102 the sequence should be resetted to 1).
consider i have these tables: tbl_requests id description owner
tbl_owners id name
tbl_RequestStatus id description
am looking for output look like this: OwnerName New Completed x 2 5 y 4 3
table requests holds number of requests where each request has an owner, table owners holds the owners names, table status holds values for a request status for example : new, in progress and completed, the query am looking for should show each owner with the number of request he/she is handling grouped by the status, so we can say that owner X has 2 new requests and 5 completed requests.
hi i have a table with below structure id no.of visit no of sales no of delivery.
I want all records to be selected with the following data also average( no.of visit),average( no of sales ), average( no of delivery) in a single query ?
