Hi,
Your help would be appreciated if you could give me some idea about why SQL 2000 takes single quote(') as a default for string searching instead of double quotes("). I have couple of stored procedures which were developed with string comparison with double quotes in SQL 6.5. If any one knows how I can change default as a double quotes(") instead of single quote(') in SQL 2000, would be great. Thanks
My code results in SQL statements like the following one - and it gives an error because of the extra single-quotes in 'it's great':
UPDATE Comments SET Comment='it's great' WHERE UserID='joe' AND GameID='503'
Here's the error I get when I try this code in SQL Server:
Msg 102, Level 15, State 1, Line 1Incorrect syntax near 's'.Msg 105, Level 15, State 1, Line 1Unclosed quotation mark after the character string ''.
I need to know how I can insert a string such as 'it's great' - how do I deal with the extra quotes issue? is there a way to ecape it like this 'it/'s great' ? This doesn't seem to work.
Here's the code that generates the SQL. I'm using a FCKeditor box instead of a TextBox, but I got the same error when I was using the TextBox:
string strUpdate = "UPDATE Comments SET Comment='";strUpdate = strUpdate + FCKeditor1.Value;//strUpdate = strUpdate + ThisUserCommentTextBox.Text;strUpdate = strUpdate + "' WHERE UserID='";strUpdate = strUpdate + (string)Session["UserID"];strUpdate = strUpdate + "'";strUpdate = strUpdate + " AND GameID='";strUpdate = strUpdate + Request.QueryString["GameID"];strUpdate = strUpdate + "'";
SqlConnection myConnection = new SqlConnection(...);SqlCommand myCommand = new SqlCommand(strUpdate, myConnection);
try{myCommand.Connection.Open();myCommand.ExecuteNonQuery();}catch (SqlException ex){ErrorLabel.Text = "Error: " + ex.Message;
}finally{myCommand.Connection.Close();}
I'm using SQL Server 2005 and ASP.NET 2.0
Much thanks
I am trying to build a dynamic where statement for my sql stored prcoedure
if len(@Office) > 0 select @strWhereClause = N'cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText( ' + @vchOffice + ',' + ''',''' + '))' + ' and ' + @strWhereClause
In this case users can enter comma delimited string in their search criteria. So if they enter we1, we2, we3 then my sql statement should look like
select @strWhereClause = cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText('we1', 'we2', 'we3'),',')
My csfParseDeLimitedText function looks like this
Create FUNCTION [dbo].[csfParseDeLimitedText] (@p_text varchar(4000), @p_Delimeter char(1))RETURNS @results TABLE (id varchar(100))ASBEGIN declare @i1 varchar(200)declare @i2 varchar(200)declare @tempResults Table (id varchar(100))while len(@p_text) > 0 and charindex(@p_Delimeter, @p_text) <> 0beginselect @i1 = left(@p_text, charindex(@p_Delimeter, @p_text) - 1)insert @tempResults select @i1select @p_text = right(@p_text, len(@p_text) - charindex(@p_Delimeter,@p_text))endinsert @tempResults select @p_text
insert @resultsselect *from @tempResultsreturnEND
My problem is it does not put quotes around the comma delimited stringso I want to put 'we1' , 'we2'. These single quotes are not coming in the dynamic sql statement. How can I modify my query so that single quotes around each entry should show up.
Any help will be greatky appreciated.
Thanks
Hi,
How to insert a string value with quotes in it in SQL Server?
This is not working:
insert table_name values(`abc`d`)
I tried to put escape in front of `, still failed.
Thanks in advance.
-Jenny Wang
I'm constructing a SQL string that needs single quotes in the WHERE clause. How do I encapsulate them in a string variable. I looked into ESCAPE and SET QUOTED_IDENTIFIER, but i don't really see any examples using string Concatenation. I'm trying to filter out the zls (0 length strings)
This doesn't work (all single quotes):
@sqlString = ' SELECT * FROM myTbl '
@sqlString = @sqlString + 'WHERE fld1 <>'' '
Thanks,
Carl
Hello,
how can I use the following statement with OPENQERY syntax:
SELECT 'hello world' FROM mytable
Maybe I have to transform quite a few and complex SQL-statements to the OPENQUERY syntax. Obviously I have problems with single quotes
SELECT * FROM OPENQUERY(LINKEDSERVER, 'select 'hello world' from mytable')
quotename('hello world', '''') does not help because this will create 'hello world' instead of hello world (w/o quotes).
How can I transform my SQL-statements with quotes to Openquery syntax?
regards
arno
I have data in a trace file, and I need to extract some info such as phone number.The problem is the phone number could be varying lengths, and various positions in the row.
For example:
@City='New York', @Phone='2035551212' (10 characters, no dashes)
or
@City='San Francisco', @Phone='918-555-1212' (12 characters, with dashes)
or
@City+'Berlin', @Phone='55-123456-7890' (14 characters, with dashes)
I can use CHARINDEX to search & find @Phone=' so I know where the phone number starts, but stuck on a programatic way to find the data between the quotes since it can vary.
I am reading data from another data source and storing it in the sqlce database. Some of the string values I'm trying to insert into the database have single quotes in the string (i.e. Johnny's Company). When I try to insert the values with the single quotes, it throws an exception. The code I use to insert the records is as follows:
cmd.CommandText = "INSERT sy_company " +
" (company_id, company, co_name, companyid) " +
"VALUES(" +
"'" + dtSYCompany.Rows[x]["company_id"] + "'," +
"N'" + dtSYCompany.Rows[x]["company"] + "'," +
"N'" + dtSYCompany.Rows[x]["co_name"] + "'," +
"'" + dtSYCompany.Rows[x]["companyid"] + "')";
cmd.ExecuteNonQuery();
When the company name (co_name) has a single quote in it, I get the error. How do I write the insert statement so it will work even though the value being inserted into co_name has a single quote in it?
Thanks so much!
Hi,
I need to concatenate a string with an int variable on a stored procedure; however, i looks like i am lost in single and double quotes. Does any one know the right comination of quotes for this please? My Code is below:
1 @Price int
2
3 DECLARE @SqlPrice varchar(50)
4
5 if (@Price is not null)
6
7 set @sqlPrice = 'AND price' + '' > '' + '' + @Price + ''
8
I have a Foreach loop that dynamically builds a query that gets submitted to a Progress 9.1d database. The "SELECT" portion of the query is static - the WHERE clause is built dynamically each pass through the for each loop. The vast majority of the columns have a dash ("-") in their names, so the query passed to progress has to have double quotes surrounding the column names. Not a big deal you would think. If I am retrieving 3 columns, my string would look like "SELECT ""manager-name"", ''"employee-name"", ""date-of-hire"" FROM PUB.EmployeeTable" - with the columns requiring quoted identifiers escaped with double quotes. My script task adds some additional info to the WHERE clause based on other conditions. Once my script task has built the query string, it assigns that string value to my Dts.Variables("SqlString") variable.
I can put a MsgBox() call in the Script task to display my query once it has been built (displaying Dts.Variables("SqlString").Value) - and it looks fine. Using the above example, it would simply be: SELECT "manager-name", "employee-name", "date-of-hire" FROM PUB.EmployeeTable.
So - My foreach loop is set up so that the query command is pulled from my Dts.Variables("SqlString") variable. It fails anytime my query has a column that requires quotes around it. I was confused, since I could take the exact query string displayed by my test MsgBox() and validate it's syntax against our Progress database (and even run it) and it worked fine.
So - I then inserted a breakpoint to break on PreExecute for the DataReader task (next task after Scrip task) to view the value of the Dts.Variables("SqlString") variable just before it gets assigned to the DataReader's Sql Command property. That's when I noticed that the value of the Dts.Variables("SqlString") in the Watch window actually showed that the "double" double quotes I had entered in the SELECT clause (to escape to one double quote) were being replaced with " (slash quote). SO - in the Watch window, my Dts.Variables("SqlString").Value reads as follows:
SELECT "manager-name", "employee-name","date-of-hire" FROM PUB.EmployeeTable.
Obviously, that query is not going to fly via SQL-92/ODBC connection to our Progress database. I've tried everything I can think of - even trying to replace "" with "" in the Foreach expression editor where the Sql Command of the data reader gets assigned. I'm at a total loss. Why would SSIS plug in what looks like C# character escaping syntax when all the expressions are supposed to be VB.NET? I've already successfully run several packages that query our Progress databases that do NOT use the double quotes in the SELECT clause and they work fine. Does anyone have any ideas??
I had a procdure in SQL 7.0 in which I am using both single quote and double quotes for string values. This proceudreused to work fine in SQL 7.0 but when I upgraded SQL 7.0 to SQL 2000, this proceudre stopped working. When I changed the double quotes to single quotes, it worked fine.
Any Idea why ??
Thanks
Manish
below is the code of my sp
it's giving my wrong result: 1 instead 0 and vice versa
could you please check what's wrong with it: i think there is something related to @var2 in the code colored in orange.
Thanks!
Code:
ALTER PROCEDURE sp_name
(
@param1 int = NULL,
@param2 int = NULL,
@Result int OUTPUT
)
AS
DECLARE @var1 AS varchar(255)
DECLARE @var2 AS varchar(255)
DECLARE @x AS varchar(1000)
IF @param1 IS NOT NULL
BEGIN
SET @var1 = (
SELECT t1col1
FROM tabl1
WHERE t1col2 = @param1)
SET @var2 = ''
DECLARE crsr CURSOR FOR
SELECT t2col1 FROM tabl2 WHERE t2col2 = @var1
OPEN crsr
FETCH NEXT FROM crsr INTO @x
WHILE @@FETCH_STATUS = 0
BEGIN
SET @var2 = @var2 + '''' + @x + '''' + ', '
FETCH NEXT FROM crsr INTO @x
END
CLOSE crsr
DEALLOCATE crsr
SET @var2 = SUBSTRING(@var2, 1, LEN(@var2) - 1)
END
ELSE
BEGIN
SET @var2 = (SELECT t2col1 FROM t2 WHERE tb2col3 = @param2)
SET @var2 = '''' + @var2 + ''''
END
PRINT @var2
IF EXISTS (SELECT * FROM tabl3 WHERE t3col1 IN (@var2))
OR
EXISTS (SELECT * FROM tabl4 WHERE t4col1 IN (@var2))
BEGIN
SET @Result = 1
END
ELSE
BEGIN
SET @Result = 0
END
Hi all,
How do you put quotes in quotes so it looks like this below?
exec('select IDENT_CURRENT('table')')
Not
exec('select IDENT_CURRENT('table')')
I just don't want the middle quotes to end the initial quote..
thanks in advance..
This is the sql statement I have:
Code:
select * from tblCalls where TNum = [NUMBER] and Street like '[TEXT]'
The problem is that the Street field contains street names with quotes (ex. DE L'ACADIE). When I run this query using this street name, it doesn't work because of the ' between the L and the A. How can I tell SQL to "ignore" the ' in the text?
Hi,
I am creating a flat file connection to a .csv file
In the columns section of the flatt file connection manager editor, I am not sure why the texts in the .csv file are shown with double quotes arouond them.
They do not have "" in the .csv file.
Thanks
Has previous work been done on this? Is their a library one can download? Here's the problem. In an aricle a person or author may make a statement about a subject or a person. I am making a database on this.
For example, here in Israel, PM Olmert may make a statement on the teacher's strike or on Abu Mazen. The article may say, speaking of Mazen, Olmert said such and such. PM Olmert said, "xxxxxxx......." with the previous material making it clear whathe was speaking of.
Right now I have ugly code. Is there a neat way of doing this?
If this is the wrong forum, can somebody direct me to the right forum?
Thanks.
Dennist
Help, please.
I'm going crazy trying to figure out how to form this SQL query. I am querying an Informix linked server and I need to pass a variable date. I am using an expression to create the query like so
"Select count(*) from " + @[User::varDBName] + ":informix.doc_tl WHERE " + @[User::varDBName] +":informix.doc_tl.d_received = {D " + @[User::varDate] +"} "
The informix query needs the date to be {D "2007-01-15"} but for the life of me, I can't get the date enclosed in quotes.
The error I get is
An OLE DB record is available. Source: "(null)". HResult: 0x80040E14
Description: "(null)"
Can anyone tell me what I'm doing wrong?
Thanks
Hi, below is the query that i use.update user set user_description=' "+ userDesc +" ' where user_id = 1;userDesc is the value taken from a textbox and is supposed to be used with the update query.userDesc = "kad'nsad'kasnd'nak";The quotes in userDesc is affecting the update. Is there anyway to replace quotes with ' using stringbuilder?
View 1 Replies View RelatedI was having some issues with converting this @BeginDate(which is passed in as a datetime) correctly and someone suggested the syntax below. It enloses it in triple single quotes. That seemed to work, but it also seems to work with single quotes too. Can someone explain the use of triple single quotes in stored procedures?
''' + CAST(@BeginDate as Varchar(30)) + '''
Help please! I have a problem with passing quotes in a parameter. I am using asp.net (vb) passing a parameter to a stored procedure.
Here is an example of the parameter I am passing from the asp page.
strIndexFilesFound = " 'file1.pdf', 'file2.pdf' "
.......Parameters("@IndexFilesFound").Value = strIndexFilesFound
And the Procedure parts
...
@IndexFilesFound char(100) = ''
....
WHERE IndexFile IN(@IndexFilesFound)
The result should be that the where query receives the data like this.
WHERE IndexFile IN ('file1.pdf', 'file2.pdf')
The number of files passed is unknown for any given query.
Much Thanks!
I have 2 SQL 6.5 databases on separate servers. Server A replicates a text field into a table on server B.
On server A the field contains text similar to THIS IS FRED'S HOUSE. After replication to Server B it looks like THIS IS FRED''S HOUSE. The distribution database also has it as THIS IS FRED''S HOUSE. Using ODBC trace I cannot see the value being passed in the text field as it is displayed as a question mark e.g. ?.
How do I fix the problem ?
Thanks
Hello all,
I am using SQL Server 6.5 SP5a.
I have to use bcp to import two text files everyday for database update. The problem is that some of the character fields that are being imported have double-quotes and/or commas in them. When these are imported into the SQL Server tables additional double quotes are being added into these strings.
Example:
INCOMING STRING = a"a
IMPORTED STRING = "a""a"
INCOMING STRING = b,b
IMPORTED STRING = "b,b"
I have searched through BOL and have not been able to find any information.
Does anyone know what is causing this and if so how to correct it?
Thanks,
Bryan Ziel
I`m new to sql and am having trouble with updates. I`m trying to make a web page where people can enter text and have it submitted to the database. The problem is that I need to let people submit text with quotes (single and double). When my cgi generates the sql, the quotes cause problems with the dbms (ie. in the statement:
UPDATE mytable SET thetext = `This is Joe`s text.` WHERE user = `joe`
the apostraphy in "joe`s" is interpreted as meaning the end of the string to enter into "thetext" ). I expect that there`s some escape character that I don`t know about? I know this is a very basic question, but any help would be greatly appreciated.
-Daren
if l have a field conating data that has quoutes around it like field idno "2809085009084 ". How would l remove the quotes ????
View 1 Replies View RelatedHi,
I need to have an varchar value with single quotes. For eg: the below code throws compilation error.
Declare @val VARCHAR(20)
SELECT @val = ''+name+''
print @val
Error: Invalid column 'name'
I want to print name enclosed with single quotes. Please guide me.
Regards,
Sam
I have a CSV with some columns containing quoted text with the text itself containing quotes.
I'm trying to use a Flat File Source in SSIS. I've set a double quote as the text qualifier (") and comma as the delimiter. The trouble I'm having is getting to text that contains a double quote like in the following example;
123,"xyz","Don't you hate when MS say's it's a "feature" and not a bug","more data"
SSIS is seeing the first quote as a text qualifier and the second quote as the end of the text. Because the next delimiter is not found (in this case a comma), it returns;
[staging_output [4195]] Error: The column delimiter for column "Column 3" was not found.
How I can get SSIS to treat the whole column as a single piece of text that just happens to contain quotes?
Hello Everyone!
I am having a problem with updating a password within a table. Below is the old and new password that needs to be updated.
Old2"3("-"3#@(%P="''_DD@D*
New :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@
Below is the query that I am trying to run. I believe my problem is becuase of the Single Quotes found within both the old and new password.
I have tried to escape the single quotes, @local_variable, CHAR(39) and other ways of playing with the string. I cannot seem to find a solution.
If you were to ignore the update statement, the SELECT statement would return no results even though the PRINT statement displays the required data.
This is what baffles me and why I cannot run the UPDATE statement, becuase of course, nothing would be updated since no results were returned.
Can anyone offer their assistance?
Thank you in advance.
__________________________________________________ _______________
DECLARE
@OLD_PASSWORD VARCHAR(50),
@NEW_PASSWORD VARCHAR(50)
-- 2"3("-"3#@(%P="''_DD@D* ///// The old password.
SET @OLD_PASSWORD = '2"3("-"3#@(%P="' + CHAR(39) + CHAR(39) + '_DD@D*'
-- :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@ ///// The new password.
SET @NEW_PASSWORD = ':"I+)#]*1#E,%R-' + CHAR(39) + CHAR(39) + '7^,TEA$X&^O_-68DIK,@'
PRINT @OLD_PASSWORD
PRINT @NEW_PASSWORD
SELECT *
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD
/* Attempt to update the password table. */
UPDATE Credentials
SET [Password] = @NEW_PASSWORD
WHERE [ID] IN
(SELECT [ID]
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD )
This is what the crystal reports makes, when you enter the tables and link. I also have some sql that i pasted there without the quotes. THey both run. Only isssue I have is that my sql which is a view does not update on demand from the server. IOW, they enter a new row. and it's not immediatlyin the crystal report. I asked the user if he can logout and back in and he says that he doesn't have to do that with other crystal reports.
SELECT "OEIND94"."IDDOCD" AS INV_DATE,
"OEIND94"."IDORD#" AS ORD_NUM,
"OEIND94"."IDORDT" AS ORD_TYPE,
"OEIND94"."IDPRLC" AS PROD_FAMILY,
"OEIND94"."IDPR$C" AS PRICE_CODE,
"OEIND94"."IDCOM#",
I have to insert "" in data and in column name in the output .csv file.I tried using Quotename function
for ex : QUOTENAME(policy.policyid, '"')AS PolicyID
Result
Policyid
"12135"
"34334"
"56765"
But i need policyId(i.e columnname) uswell in ""
Result
"PolicyId"
"12135"
"34334"
"56765"
How to amend the query.
Hi,It seems to be simple, however, it stumbles me.how to replace all the double quotes (") within the followingsentence (or a column) with single quotes ('),colA = this is a freaking "silly" thing to dointocolA this is a freaking 'silly' thing to doSelect Replace(colA,'"',''')[color=blue]>From tblXYZ[/color]won't work,Select Replace(colA,'"',"'")[color=blue]>From tblXYZ[/color]won't work neither.How come? Thanks.
View 4 Replies View RelatedI have been searching for an escape character or a way of escapingdouble quotes that are actually in a string that I am using in thecontains predicate.Here is an exampleselect *from tablewhere contains(field, '"he said "what is wrong", that is what hesaid"')I need the double quotes in the string because they are part of thetext. Of course, Fulltext search raises the errorServer: Msg 7631, Level 15, State 1, Line 1Syntax error occurred near 'what is wrong", that is what he said'.Expected ''''' in search condition '"he said "what is wrong", that iswhat he said"'.If I remove the double quotes, the search does not return the properresults.Thanks in advance for the helpBill
View 2 Replies View RelatedHi
i am importing data from table to flat file(csv). i have two problems
1. if a column has commas(,) it should not create a new column i.e the column in csv file can have commas
2.if a column has double quotes then csv file column should have double quotes. please help me.I am using derived column I dont know how to search double quotes in string.
if my table has 2 columns
col1 col2
a abc,"scfddf"ghisk
b bc,de
c de
my csv file should look like this
a abc,"scfddf" ghisk
b bc,de
c de
thanks
Hi,
I want to pass a query to SQL Server 2005 through the table adapter query.
Some of the variables with have single quotes e.g. He's
I know with PHP/MySQL Addslashes() is used.
What is the alternative for C#?
Thanks.