i have a flat file with string column 20060616 . i am converting the string to date (Oracle) i am using the derived column with the following experssion .
while executing the package its failing and throwing the following error
[Derived Column [73]] Error: The "component "Derived Column" (73)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "JOINDDATE" (124)" specifies failure on error. An error occurred on the specified object of the specified component.
I have been trying to read a flat file which has a birthdate field. The field is string and the format is "011594". I have been trying to convert it to a date field in the following format "01/15/1994". Using the forum I was able to write the following expression but I am still keep getting error messages.
I also noticed few records are missing birthdate and few do not have the complete birthdate which means some birthdates are missing year and some are missing month. For example, some are completely missing and some are partially missing, like " " or "0312 ". Could this be the reason I was getting error message since the following expression does not include null and incomplete date of birth?
[Derived Column [1014]] Error: An error occurred while attempting to perform a type cast.
[Derived Column [1014]] Error: The "component "Derived Column" (1014)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "DOB" (2292)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Derived Column" (1014) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
I have a web page which executes a stored procedure with several parameters. On execution I get an error for the following piece of code. I will be passing null value to the stroed procedure for this parameter "ActiveDate". Dim parameterActivedate As SqlParameter = objCommand.Parameters.Add("@Activedate", SqlDbType.DateTime) parameterActivedate.Value = "" The error is: System.InvalidCastException: Conversion from string "" to type 'Date' is not valid. at Microsoft.VisualBasic.CompilerServices.Conversions.ToDate(String Value) at webpage.Do_Update(Object Sender, EventArgs e)
I use the derived column to convert a string date from a flat file like this: "Jan 02 2005" into a datetime. I have seen in the forum to use: (DT_DATE)(SUBSTRING(mydate,5,2) + "-" + SUBSTRING(mydate,1,3) + "-" + SUBSTRING(mydate,8,4)) However, even if it produces a string like '02-Jan-2005', the following cast to dt_date fails. I have also tried inverting month and day, year/month/day but all with the same result:
Derived Column [73]] Error: The component "Derived Column" failed because error code 0xC0049064 occurred, and the error row disposition on "output column"...
I think the cast fails bacause of the month format. Therefore the only solution would be to code in in a lookup table Jan, 01 | Feb, 02 |... ????
Hi,I'm trying to concatenate a Description (nchar(100)) and Date(datetime) as Description and my initial effort was just"...description+' '+open_date as description..." which throws a date/string conversion error; finally came up with a working string belowbut don't think it's the optimal way to do this - any suggestions?select (rtrim(description)+''+rtrim(convert(char(2),datepart(mm,open_date)))+'/'+convert(char(2),datepart(dd,open_date))+'/'+convert(char(4),datepart(yyyy,open_date))) as description fromoncd_opportunity where opportunity_id=?open_date is not a required field at the db level, but it is requiredon the form so it should not be null as a rule.
I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?
This is my code and I don't know why this error keeps coming out : PS : I did cursor to execute query.Th error showed is bold:
DECLARE RegCreatedDate CURSOR FOR SELECT DISTINCT (CONVERT(NVARCHAR,CreatedDate,103)) FROM CA_Registration WHERE Month(CreatedDate)= @paMonthIn AND YEAR(CreatedDate)=@paYearIn OPEN RegCreatedDate FETCH NEXT FROM RegCreatedDate INTO @RegCreatedDate WHILE @@FETCH_STATUS = 0
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
I'm trying to select only July from show_held but I keep on getting the error message saying:
Conversion failed when converting date and/or time from character string.
I get error message after I write this code:
ANDshow.show_held = '&July&'
As you can see from the below code, How do I select July from times_held_in_July?
SELECTevent_name, DATENAME (MONTH, show_held) AS times_held_in_July FROMevent, show WHEREevent.show_id = show.show_id
Result:
event_name times_held_in_July DressageJuly Jumping July Led in July Led in September Led in May DressageApril DressageJuly Flag and PoleJuly SELECTevent_name, DATENAME (MONTH, show_held) AS times_held_in_July FROMevent, show WHEREevent.show_id = show.show_id ANDshow.show_held = '&July&'
Result:
Msg 241, Level 16, State 1, Line 24
Conversion failed when converting date and/or time from character string.
I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...
DECLARE @table nvarchar(500) DECLARE @sql nvarchar(520) DECLARE CursorSelect CURSOR FOR select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name
I've imported a CSV file into a table in SQL Server 2012. It's a large file, 140,000+ rows, so I couldn't covert it to Excel first to preserve the date format due to Excel's row limit. In the CSV file, there were 3 column with date data in "31-Aug-09" format, and the import automatically transformed these in "31AUG09" format (varchar(50)) in SQL Server. Now I need to convert these 3 columns from varchar to datetime so I could work with them in date format.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
Hi, Basically the above is a very common requirement, please comment on my solution which I've arrived at by searching through the web; -
In summary I have used 3 SSIS components these are "Flat File Source", "Derived Column" and "SQL Server Destination".
1) File Connections Manager Editor 1.1) Within File Connections Manager Editor; - Name the data type e.g. "INTERCHANGE_NET_APP_DATE_SRC" and assign a type to the data type e.g. string[DT_STR]
1.2) Click on the Preview button to ensure the expected text is assigned to the expected data type.
2.4) Select "database timestamp [DT_DBTIMESTAMP] " as Data Type.
2.5) Within the Mappings tab of the SQL Destination Editor have; - Input Column as INTERCHANGE_NET_APP_DATE and Destination Column as INTERCHANGE_NET_APP_DATE.
Please comment on the above, I will then pass on my suggestion to Microsoft.
hi all, I have writen a function in which I'm selecting max of varchar datatype column after converting it into integer datatype ,though the where condition of the select statement retrives only numbers which are in string format but I'm getting conversion error for a string value which doesn't satisfy the condition. can any one explain this behaviour? Thanks in advance.
have a SQL server table with a vairbale unitCost of type money and via a stored procedure I am trying to update it. Through asp I capture the value as a string and then ATTEMPT to convert it into a variable of type money before executing the stored procedure as follows.
SqlParameter parameterUnitCost= new SqlParameter("@unitCost", SqlDbType.Money,8); parameterUnitCost.Value = unitCost; myCommand.Parameters.Add(parameterUnitCost);
This gives me an input string error. On the other hand if I change that line to the following, the page works flawlessley:
SqlParameter parameterUnitCost= new SqlParameter("@unitCost", SqlDbType.Money,8); parameterUnitCost.Value = 25.45; myCommand.Parameters.Add(parameterUnitCost);
Hi, Ive imported a data set into SQL. Now on redefining a text field to datetime, most dates that are filled come through okay.
The issue is that there are some empty fields which I'd like for it to stay empty after conversion. Now what happens is that the empty field becomes '01/01/1900' - which is throwing off our queries as we need it to be compared to other date fields.
Is there a way to keep it empty even after the datatype is changed to datetime? Thanks a bunch!
I have a feeling I'm missing something obvious here, but being new toSQL Server is my only excuse!I have a table that holds a variety of data. I am writing a userreport where the user wants to be able to return all data that fallsbetween a start and end date that they enter.The query should therefore be along the lines ofSELECT [some columns]FROM [my_table]WHERE [column holding date] BETWEEN [start date] AND [end date];However, the column holding the date information has been defined, forreasons best known to the designer, as a VARCHAR(10) and the data isin the format dd/mm/yy.I have tried CAST, which simply gave an error. I then tried CONVERTin the form CONVERT(datetime, [column holding date], 3) and the queryruns without error but returns no data, even though I can see there isdata that would meet the criteria in the table.Can anyone help me with a solution to this?ThanksH
I am trying to convert some strings to number datatype. Some numbers are like this. 1,45.45- 21.21- 4,611.20- Is it possible to convert these type of strings to number datatype. Thank you.
Lets say I have a table named Projects with the data below.Y07001Y07002Y07003Y07010Y07011I want to pick up the last 3 numbers and add a one to it so. Declare @Count as varchar(3) SELECT Top 1 @Count = Right(Project, 3)+1 FROM Projects Order by ID desc SELECT @Count This is what I am using. It picks up the last entry, add a one to it and gives me 12 in return. What i want is 012, not 12
I am trying to insert data from a web form to a SQL Database. I am receiving the following error: {"String was not recognized as a valid Boolean."} I am also receiving a similar error for text boxes that have dates. Below is the code that I am using: <asp:SqlDataSource id="SqlDataSource1" runat="server" connectionstring="<%$ ConnectionStrings:ConnMktProjReq %>" selectcommand="SELECT LoanRepName,Branch,CurrentDate,ReqDueDate,ProofByEmail,ProofByEmail,FaxNumber,ProjectExplanation,PrintQuantity,PDFDisc,PDFEmail,LoanRepEmail FROM MktProjReq" insertcommand="INSERT INTO MktProjReq(LoanRepName, Branch, CurrentDate, ReqDueDate, ProofByEmail, ProofByEmail, FaxNumber, ProjectExplanation, PrintQuantity, PDFDisc, PDFEmail, LoanRepEmail) VALUES (@RepName, @BranchName, @Date, @DueDate, @ByEmail, @ByFax, @Fax, @ProjExp, @PrintQty, @Disc, @Email, @RepEmail)"> <InsertParameters> <asp:FormParameter Name="RepName" FormField="LoanRepNameBox"/> <asp:FormParameter Name="BranchName" FormField="BranchList"/> <asp:FormParameter Name="Date" FormField="CurrentDateBox" Type="DateTime"/> <asp:FormParameter Name="DueDate" FormField="ReqDueDateBox" Type="DateTime"/> <asp:FormParameter Name="ByEmail" FormField="ProofByEmailCheckbox" Type="boolean"/> <asp:FormParameter Name="ByFax" FormField="ProofByFaxCheckbox" Type="boolean"/> <asp:FormParameter Name="Fax" FormField="FaxNumberBox"/> <asp:FormParameter Name="ProjExp" FormField="ProjectExplanationBox"/> <asp:FormParameter Name="PrintQty" FormField="PrintQuantityBox"/> <asp:FormParameter Name="Disc" FormField="PDFByDiscCheckbox" Type="boolean"/><asp:FormParameter Name="Email" FormField="PDFByFaxCheckbox" Type="boolean"/> <asp:FormParameter Name="RepEmail" FormField="LoanRepEmailBox"/> </InsertParameters> </asp:SqlDataSource>protected void Button1_Click(object sender, EventArgs e) { SqlDataSource1.Insert(); } I have been searching forums for parsing data, but I haven't found anything that works. Can anyone provide guidance. Thank you, Paul
I've have about 100 tables, for some reasons, column values that are originally NULL was inserted as emtpy string. So, I am wondering if I can write JUST ONE SQL (hopefully don't have to specify the field names in the SQL as well) for each table so that all the empty strings will be converted back to NULL.
Hi, I'm making a webapplication in C# with MSSQL as database. I've created a form to do an advanced search on books. The user can type in name, author, .... and he can also mark 2 dates from to Calendar objects (I made sure date one can not be bigger than date 2). I'm using smalldatetime as DBtype. The 2 selected values are DateTime in asp. The results are shown in a gridview. Since I added the feature I keep getting the same error and I can't find where it is. Here's some code: 1 public List GetBooks2(string invB,string titelB, string auteursB, string taalB, string uitgeverijB, string jaarB, string keywordsB, string categorieB, string standplaatsB, string ISBN,DateTime datum1, DateTime datum2, string sortExpression) 2 { //this is my method for the advanced search 3 using (SqlConnection oConn = new SqlConnection(_connectionString)) 4 { 5 string strSql = "select * FROM Boek where 1 = 1"; 6 if (!String.IsNullOrEmpty(invB)) strSql += " and (inventaris_nr like @invB)"; 7 if (!String.IsNullOrEmpty(titelB)) strSql += " and (titel like @titelB)"; 8 if (!String.IsNullOrEmpty(auteursB)) strSql += " and (auteurs like @auteursB)"; 9 if (!String.IsNullOrEmpty(uitgeverijB)) strSql += " and (uitgeverij like @uitgeverijB)"; 10 if (!String.IsNullOrEmpty(ISBN)) strSql += " and (ISBN10 like @ISBN or ISBN13 like @ISBN)"; 11 if (!String.IsNullOrEmpty(standplaatsB)) strSql += " and (standplaats like @standplaatsB)"; 12 if (!String.IsNullOrEmpty(jaarB)) strSql += " and (jaartal like @jaarB)"; 13 if (!String.IsNullOrEmpty(keywordsB)) strSql += " and (keywords like @keywordsB)"; 14 if (!String.IsNullOrEmpty(taalB)) 15 if (taalB == "Andere") 16 strSql += " and (taal NOT IN ('nederlands', 'frans', 'engels', 'spaans', 'italiaans', 'duits'))"; 17 if (taalB == "--Geen voorkeur--") 18 strSql += ""; 19 else 20 strSql += " and (taal like @taalB)"; 21 22 if (!String.IsNullOrEmpty(categorieB)) 23 if (categorieB == "--Selecteer een categorie--") 24 strSql += ""; 25 else 26 strSql += " and (categorie like @categorieB)"; 27 28 if (datum1 == null) 29 strSql += ""; 30 else 31 if (datum2 != null) 32 { 33 34 strSql+=" and datumB between @datum1 and @datum2"; 35 } 36 else strSql+=""; 37 if (!String.IsNullOrEmpty(sortBLOCKED EXPRESSION 38 strSql += " order by " + sortExpression; 39 else 40 strSql += " order by id"; 41 42 SqlCommand oCmd = new SqlCommand(strSql, oConn); 43 oCmd.Parameters.Add(new SqlParameter("@invB", "%" + invB + "%")); 44 oCmd.Parameters.Add(new SqlParameter("@titelB", "%" + titelB + "%")); 45 oCmd.Parameters.Add(new SqlParameter("@auteursB", "%" + auteursB + "%")); 46 oCmd.Parameters.Add(new SqlParameter("@taalB", "%" + taalB + "%")); 47 oCmd.Parameters.Add(new SqlParameter("@uitgeverijB", "%" + uitgeverijB + "%")); 48 oCmd.Parameters.Add(new SqlParameter("@jaarB", "%" + jaarB + "%")); 49 oCmd.Parameters.Add(new SqlParameter("@keywordsB", "%" + keywordsB + "%")); 50 oCmd.Parameters.Add(new SqlParameter("@categorieB", categorieB )); 51 oCmd.Parameters.Add(new SqlParameter("@standplaatsB", "%" + standplaatsB + "%")); 52 oCmd.Parameters.Add(new SqlParameter("@ISBN", "%" + ISBN + "%")); 53 oCmd.Parameters.Add(new SqlParameter("@datum1", "%" + datum1 + "%")); 54 oCmd.Parameters.Add(new SqlParameter("@datum2", "%" + datum2 + "%")); 55 56 57 oConn.Open(); 58 SqlDataReader oReader = oCmd.ExecuteReader(); 59 List boeken = GetBoekCollectionFromReader(oReader); 60 oReader.Close(); 61 return boeken; 62 } 63 }
I think that that method is correct, not sure though... The code for GetBoekCollectionFromReader(oReader) is this=1 protected List GetBoekCollectionFromReader(IDataReader oReader) 2 { 3 List boeken= new List(); 4 while (oReader.Read()) //THIS IS WHERE THE ERROR APPEARS 5 { 6 boeken.Add(GetBoekFromReader(oReader)); 7 8 } 9 return boeken; 10 }
That's the method where the error appears... Where should I place a breakpoint to get the exact location? To make sure all methods in this code are explained, here's the code for GetBoekFromReader(oReader))= 1 protected Boek GetBoekFromReader(IDataRecord oReader) 2 { 3 Boek boek = new Boek(); 4 boek.idB= (int)oReader["id"];//id auto generated dus verplicht 5 if(oReader["inventaris_nr"] != DBNull.Value) 6 boek.Inventaris_nrB = (string)oReader["inventaris_nr"]; 7 if (oReader["auteurs"] != DBNull.Value) 8 boek.AuteursB = (string)oReader["auteurs"]; 9 boek.TitelB = (string)oReader["titel"];//titel verplicht 10 if (oReader["taal"] != DBNull.Value) 11 boek.TaalB = (string)oReader["taal"]; 12 if (oReader["uitgeverij"] != DBNull.Value) 13 boek.UitgeverijB = (string)oReader["uitgeverij"]; 14 if (oReader["aantal_p"] != DBNull.Value) 15 boek.Aantal_pB = (string)oReader["aantal_p"]; 16 if (oReader["jaartal"] != DBNull.Value) 17 boek.JaartalB = (int)oReader["jaartal"]; 18 if (oReader["keywords"] != DBNull.Value) 19 boek.KeywordsB = (string)oReader["keywords"]; 20 if (oReader["categorie"] != DBNull.Value) 21 boek.CategorieB = (string)oReader["categorie"]; 22 if (oReader["standplaats"] != DBNull.Value) 23 boek.StandplaatsB = (string)oReader["standplaats"]; 24 if (oReader["ISBN13"] != DBNull.Value) 25 boek.ISBN13 = (string)oReader["ISBN13"]; 26 if (oReader["ISBN10"] != DBNull.Value) 27 boek.ISBN10 = (string)oReader["ISBN10"]; 28 if (oReader["URL"] != DBNull.Value) 29 boek.UrlB = (string)oReader["URL"]; 30 if (oReader["username"] != DBNull.Value) 31 boek.UsernameB = (string)oReader["username"]; 32 if (oReader["passwoord"] != DBNull.Value) 33 boek.PasswoordB = (string)oReader["passwoord"]; 34 if (oReader["datumB"] != DBNull.Value) 35 boek.DatumBoek = (DateTime)oReader["datumB"]; 36 if (oReader["status"] != DBNull.Value) 37 boek.StatusB = (string)oReader["status"]; 38 39 40 return boek; 41 }
Conversion failed when converting datetime from character string. That's the error I get by the way. It also appears when I do a search and I don't use the date function... for example when I only fill in the title textbox and I don't select any dates from the calendars... Sorry for the long post, but I think it's the only way to get a clear view on it...
I am having an issue with a Report in SSRS against a Sybase db.
The dataset for the report is a Sybase stored proc which is passed a parameter (varchar). When I run the proc in Sybase it runs fine, when I run it in SSRS in the data tab it runs fine, but when I try to preview the report, or run from IE after deploying it I get the following error:
An error has occurred during report processing. (rsProcessingAborted) Get Online Help Query execution failed for data set 'Table_1'. (rsErrorExecutingCommand) Get Online Help The given type name was unrecognized
Looks like it is an error converting the string in SSRS to a varchar in Sybase, but I don't know how to fix it.
If I create a table with an identity (int) column and the varchar column, join this to the proc and pass the int as the parameter the report works fine!! (This is not an option in production though.)
I am using SybaseASE OLE DB Provider Version 02.70.0032
