I'm trying to load in the code to a tutorial that requires SQL Server. Step number one on the install instructions says:
Set Up The Database
You may choose to set up your own Northwind database or restore the included Northwind.bak. Regardless of which approach you take you will need to grant your local [MachineName]ASPNET account access to Northwind and then execute GenerateStoredProcedures.sql against it to create the stored procedures. If you receive a message "There is no such user or group 'aspnet'." you may need to search and replace "ASPNET" with "[your machine name]ASPNET"
I'm using SQL Server Express and the SQL Server Management Studio Express, and well...I'm already stuck. I'm trying to create a new user named ASPNET from the management Studio. I don't see any UI that mentions creating user accounts, and the closest thing is LOGIN accounts. So I created a ASPNET login account, and the disconnected from SQL Express and tried to login as ASPNET. When I do this, I get an error that reads:
Login failed for user 'aspnet'. The user is not associated with a trusted SQL server connection. ERROR: 18452
suprisingly, every SQL Express tutorial that I could find never seems to mention anything about creating a user account. Can someone clue me in to what I am doing wrong? Or point me to a SQL Express tutorial that explains user accounts or logins so I can move on to step #2.
Thanks, -=Me=-
I want to convert .rdl to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is: 1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however. 2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005) 3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
Hi, I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory. Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Is there a good step by step guide to setting up an indirect configuration? I've followed the steps in Kirk Haselden's 'Keep your packages in the dark' article 3 or 4 times this afternoon and nothing seems to work. I cannot even get the XML configuration file to work by accessing it directly. I'm using the wizard to create the file.
Just wondering if there was something else out there....
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) Additional information: An exception occured while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
Dear Experts, please guide me for replcation..... i'm using sql server 2005 server tools developer edition. my OS is professional 2000. and i've sqlserver 2000 client tools also
i've two databases in my machine. publisher is in different instance, and the transactions might be maximum 50 per day. my aim is when ever developer enters the data into the main database, automatically it should be updated on the my two databases also. i mean the server is sysA and the database is srtp. my machine is sys20 and the databases are srtp1, srtp2. how should i make sysA as publisher? i've right click on the server databases, but it is showing newsubscriptions option only.
Vinod Even you learn 1%, Learn it with 100% confidence.
Intel D975XBX €“ 930 €“ 2GB ram €“ HD 300GB - MatroxVD Windows XP Sp2 + updates Visual Studio 2005 Professional edition SQL Sever 2005 Standard Edition
20070203 Install Practice Files at D:Program FilesMicrosoft PressVisual C Sharp Step by Step.
Configuring SQL Sever Express Edition Hostname - xxxxxxxxx..
At sqlcmd €“s xxxxx...SQLExpress €“E got - Pipes error.
Open Microsoft SQL Sever 2005 - Configuration Tools €“ SQL Configuration Manager €“ select Protcols for SQLEXPRESS €“ select Named Pipes €“ enable €“ close.
At sqlcmd €“s xxxxx..SQLExpress €“E get Sqlcmd: €˜ €˜ : Unknown Option. Enter €˜ -? €˜ for help.
Chdir C:Documents and SettingsAll UsersStart MenuProgramsMicrosoft Server 2005 Sqlcmd €“s xxxxxx..SqlExpress €“E Hresult 0x2, Lvel 16, State 1 Named Pipes Provider: Couldnot open a connection to SQL Server [2]. Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.. Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
How do I fix this?
Need to be able to to use the Northwind Traders data base
Ok I have created a 2005 sql advanced database with text indexing. I have create the database like so created a new database with text indexing enabled and the following table create table support (problemId VARCHAR(50) NOT NULL PRIMARY KEY, problemTitle varchar(50) NOT NULL, problemBody text NOT NULL, linkOne varchar(50), linkTwo varchar(50), linkThree varchar(50), linkFour varchar(50), ftid int NOT NULL) next create fulltext catalog remoteSupportCatalog create unique index ui_remotesupport ON support (ftid) then create fulltext index on support(problemBody)key index PK__support__7C8480AE on remoteSupportCatalog -------- I then populated some rows and issues a quesry Select * from support where freetext(problemBody, 'test database') it works pulls back all the data I expected it to pull back
In my asp page I created a database connection with the folling select command <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:rsdb2ConnectionString2 %>" SelectCommand="SELECT * FROM support WHERE FREETEXT(problemBody, @srchBox)">
created the search parameter<SelectParameters> <asp:ControlParameter ControlID="srchBox" PropertyName="Text" Type="String" Name="srchBox" /> //this is a text box that is searchable with a button </SelectParameters> and it doesnt give me back an error or data it does nothing. What am I missing?????
I hate making complecated queries....but this doesn't seem too hard and I cannot figure out where my error is. The message is "Incorrect syntax near the keyword 'FROM'."
The query is: SELECT tblUsers.lUserID GROUP BY tblUsers.lUserID HAVING Count(tblDLHistory.lDownloadID) = 0 FROM tblUsers LEFT JOIN tblDLHistory ON tblUsers.lUserID = tblDLHistory.lUserID WHERE tblDLHistory.lVersionID = 5
I need to search the database and pull up all customers who have a 'device' and their email address. I have watered down my select statement, but the following is the basics of it. I just cannot figure out how to also append the email. I have tried many different attempts and have come up dry.
Select a.company From dbo.contact1 as a, ( Select DISTINCT accountno From dbo.contsupp Where contact LIKE 'Product Inventory' AND contsupref LIKE '%device%' ) as b Where a.accountno = b.accountno
Below are some sample databases to get an idea of some possibilities. There will not always be an entry in dbo.contsupp for an email address. There will not always be an entry in dbo.contsupp for a device.
I have a small table to manage orders in my company. When a new order is entered, the script makes use of the last row of the table to find out the last order, increments it and creates the new order number. The problem is, a few days ago the last row got stuck. New insertions to the table all got the same order number and are placed above the last row. Anybody has any idea what's going on?
Heres is a shorten downed example of what I am trying to achieve. I have four tables. The first being OrderHeader, the second OrderLines, the third StockCategory. The OrderHeader table contains basic order details, which in turn is linked to the OrderLines table which show if the order in the OrderHeader has a single or multiple order lines. The StockCategory table shows what stock group the item in each order line is associated to.
Here is an example of the tables in a shorten downed version (in both data and fields):
OrderHeader: Sales Order Ref, Order Date, 1, 01/05/2008 2, 01/05/2008 3, 02/05/2008 4, 02/05/2008
OrderLines: Sales Order Ref, Part Number 1, 222 1, 234 1, 333 2, 222 2, 555 2, 444 3, 333 3, 111 4, 222
StockCategory
Stock Category, Part Number, A, 222 B, 234 C, 333 D, 444 E, 111
The thing I am trying to do is assign each of the orders to a Stock Group which I can do. The thing that has baffled me is if an two of the order lines in one order are assigned to different stock groups. If this occurs I want to assign the order to the order to the stock group with the highest priority (1 being highest, 3 being lowest) for example if one order line in the order was assigned to Berr (priority 1) and the other to DFID (priority 3) the order would be assigned to Berr.
SELECT @BeginDate = [BeginDate] FROM DatePeriods AS dp WHERE dp.ID = @Period SELECT @EndDate = [EndDate] FROM DatePeriods AS dp WHERE dp.ID = @Period
SELECT COUNT(oh.[Sales Order Reference]) FROM dbo.OrderHeaders AS oh LEFT JOIN dbo.OrderLines AS ol ON oh.[Sales Order Reference] = ol.[Sales Order Reference] LEFT JOIN dbo.StockCategories AS sc ON ol.[Part Number] = sc.[Part Number] WHERE oh.[Order Date] BETWEEN @BeginDate AND @EndDate AND sc.[Stock Group] IN (SELECT sg.[Stock Group] FROM dbo.StockGroup AS sg WHERE sg.[ID] = 'Berr') AND ol.[Sales Order Reference] NOT IN (SELECT col.[Sales Order Reference] FROM dbo.CancelledOrderLines AS col WHERE col.[Part Number] = ol.[Part Number])
Been spinning on this for whole weekend I can't seem to get what you I want. I have the following xml result from my query. As you notice one of the child elements has the tag identifier VJobs, how can I make it so it says 'task' instead?
Here is the query, which details jobs to be done on different equipments SELECT EquipmentID + 1 as id, EquipmentDescr as [name], '#99ccff' AS color, 'true' AS [expand], (SELECT JobID + 2AS id, 'Layout#' AS [name], '#99ccff' AS color, (SELECT [taskproperty-id] AS [taskproperty-id], [value] AS [value] FROM dbo.JobDetails customproperty WHERE customproperty.JobID = VJobs.JobID FOR XML AUTO, TYPE) FROM VJobs WHERE VJobs.EquipmentID = task.EquipmentID FOR XML AUTO, TYPE) FROM VEquipments task ORDER BY EquipmentDescr FOR XML AUTO, TYPE
Hello, Well actually I am beginner to ASP.Net, I am working on Microsoft Virtual PC with VS 2005 and SQL Server 2005 installed. Now when Create web application in Studio all works fine with databases but when i try to write some code for accessing SQL Databases I keep getting this error PLZ heLP.Following is my code<% @ Import Namespace="System.Data" %><% @ Import Namespace="System.Data.SqlClient" %><html><script language="C#" runat="server" Debug="false" >SqlConnection sqlcon;protected void Page_Load(Object Src, EventArgs e){ sqlcon=new SqlConnection("Data Source=VS02005;Initial Catalog=Gaurav;Integrated Security=True"); SqlDataAdapter sqlcom = new SqlDataAdapter("select * from Employee", sqlcon); DataSet ds = new DataSet(); sqlcom.Fill(ds,"Employee"); DataGrid1.DataSource = ds.Tables["Employee"].DefaultView; DataGrid1.DataBind();}</script><form runtat="server"> <asp:datagrid id="DataGrid1" runat="server" /></form></html>This is the error i am gettingServer Error in '/' Application.--------------------------------------------------------------------------------SELECT permission denied on object 'Employee', database 'Gaurav', schema 'dbo'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SELECT permission denied on object 'Employee', database 'Gaurav', schema 'dbo'. I am stuck dont know what to do, I hve checked all permissions for user gaurav, I also gave administrator rights to gaurav but nothing is working PLEASE help me.
Sorry for all the code below. I am realizing that my DB design is bad but I already have 7 pages built around it that work fine...until now, so I would really like to not change the DB if possible. My table has 22 columns: iID which is the identity colum. Then there is iAsmtID which is the assessment ID. Lastly there are 20 colums- q1 through q20, each of which will have a 1, 2, or 3, depending on the radio buttons the user clicked. Nows my problem. I have to find a percent for the assessment. It works like this. 3s are NA so we are not worried about them now. I need to find the number of ones and the number of twos for each assessment ID. Then add those together and divide by the number of ones. How can I find the number of the ones and twos. I have below but its not working. Says there is incorrect syntax at the ',' which is a different color below. Any and all help appreciated.'Open connectionset conn=Server.CreateObject("ADODB.Connection")conn.open My_Connset rs = Server.CreateObject("ADODB.Recordset")str = "SELECT SUM((CASE WHEN q1=1 THEN 1 ELSE 0 END)+(CASE WHEN q2=1 THEN 1 ELSE 0 END)+(CASE WHEN q3=1 THEN 1 ELSE 0 END)+(CASE WHEN q4=1 THEN 1 ELSE 0 END)+(CASE WHEN q5=1 THEN 1 ELSE 0 END)+(CASE WHEN q6=1 THEN 1 ELSE 0 END)+(CASE WHEN q7=1 THEN 1 ELSE 0 END)+(CASE WHEN q8=1 THEN 1 ELSE 0 END)+(CASE WHEN q9=1 THEN 1 ELSE 0 END)+(CASE WHEN q10=1 THEN 1 ELSE 0 END)+(CASE WHEN q11=1 THEN 1 ELSE 0 END)+(CASE WHEN q12=1 THEN 1 ELSE 0 END)+(CASE WHEN q13=1 THEN 1 ELSE 0 END)+(CASE WHEN q14=1 THEN 1 ELSE 0 END)+(CASE WHEN q15=1 THEN 1 ELSE 0 END)+(CASE WHEN q16=1 THEN 1 ELSE 0 END)+(CASE WHEN q17=1 THEN 1 ELSE 0 END)+(CASE WHEN q18=1 THEN 1 ELSE 0 END)+(CASE WHEN q19=1 THEN 1 ELSE 0 END)+(CASE WHEN q20=1 THEN 1 ELSE 0 END) AS [color:#FF0000]CountOfOnes,SUM[/color]((CASE WHEN q1=2 THEN 1 ELSE 0 END)+(CASE WHEN q2=2 THEN 1 ELSE 0 END)+(CASE WHEN q3=2 THEN 1 ELSE 0 END)+(CASE WHEN q4=2 THEN 1 ELSE 0 END)+(CASE WHEN q5=2 THEN 1 ELSE 0 END)+(CASE WHEN q6=2 THEN 1 ELSE 0 END)+(CASE WHEN q7=2 THEN 1 ELSE 0 END)+(CASE WHEN q8=2 THEN 1 ELSE 0 END)+(CASE WHEN q9=2 THEN 1 ELSE 0 END)+(CASE WHEN q10=2 THEN 1 ELSE 0 END)+(CASE WHEN q11=2 THEN 1 ELSE 0 END)+(CASE WHEN q12=2 THEN 1 ELSE 0 END)+(CASE WHEN q13=2 THEN 1 ELSE 0 END)+(CASE WHEN q14=2 THEN 1 ELSE 0 END)+(CASE WHEN q15=2 THEN 1 ELSE 0 END)+(CASE WHEN q16=2 THEN 1 ELSE 0 END)+(CASE WHEN q17=2 THEN 1 ELSE 0 END)+(CASE WHEN q18=2 THEN 1 ELSE 0 END)+(CASE WHEN q19=2 THEN 1 ELSE 0 END)+(CASE WHEN q20=2 THEN 1 ELSE 0 END) AS CountOfTwos FROM ITCC_Test WHERE iAsmtID="&iAsmtIDresponse.Write(str)rs.open str, connif rs.eof = true then ' response.Write("<h2>No count done</h3>") response.End()else'Declare variables CountOfOnes = rs("CountOfOnes") CountOfTwos = rs("CountOfTwos")end ifrs.closeset rs = nothingconn.close'set conn = nothing
I have a job that extracts data from 10 different tables to 10 diffrenet tables of MS-Access (.mdb file). The job ran okay since last one month but yesterday it ran and did not stop at all .Status is shown as "Executing" .. I tried to stop it but it is not stopping . I tried to kill associated process (spid) but it allows me to kill spid but it shows there running.
Any idea why it is happening ?
If any body ahs any solution you can call me at 1 860 520 7454.
I have a table with 4 relevant fields (blank lines added for clarity). State, City, Name, Primary_Contact IL, Springfield, Bill, n IL, Springfield, Frank, n IL, Springfield, Larry, n
IL, Bloomington, Steve, n IL, Bloomington, Chris, y
IL, Chicago, Betty, n IL, Chicago, Linda, n IL, Chicago, Sue, n
I need a query to return the state and cities that don't have a Primary_Contact='y' So the results would be: IL, Springfield IL, Chicago
I need the results from the following query to be with the results of the second query. Any ideas?
Code:
SELECT PR.WBS1, PR.WBS2, PR.WBS3, PR.Fee, PR.ConsultFee, PR.ReimbAllow, PR.LongName, PR.Name, CL.Name AS CLIENTNAME, CLAddress.Address2 AS CLIENTADDRESS2, CLAddress.Address3 AS CLIENTADDRESS3, CLAddress.Address4 AS CLIENTADDRESS4, CFGMain.FirmName, CFGMain.Address1, CFGMain.Address2, CFGMain.Address3, CFGMain.Address4, Contacts.FirstName + ' ' + Contacts.LastName AS CONTACT, LB.AmtBud, LB.BillBud
FROM PR LEFT OUTER JOIN Contacts ON PR.ContactID = Contacts.ContactID LEFT OUTER JOIN CL ON CL.ClientID = PR.ClientID LEFT OUTER JOIN CLAddress ON CL.ClientID = CLAddress.ClientID LEFT OUTER JOIN LB ON LB.WBS1 = PR.WBS1 AND PR.WBS2 = LB.WBS2 AND LB.WBS3 = PR.WBS3 CROSS JOIN CFGMain Where pr.wbs1 = '001-298' and pr.wbs3 != 'zzz'
and
Code:
SELECT * FROM LD WHERE (BilledPeriod = '200408') AND (WBS1 = '001-298')
I have a sql problem I'm trying to solve. I'm selecting from a table based on a foreign key, and the select returns 2 rows. The table has a column called type, and each row for the foreign key has a different type value. Hopefully the example below can help to explain:
Case 1:
PK | FK | Type | Text -------------------------- 1 | 226 | 0 | some text goes here 2 | 226 | 1 | NULL
Case 2:
PK | FK | Type | Text -------------------------- 3 | 334 | 0 | some text goes here 4 | 334 | 1 | actual text I want to select is in this cell
I'm trying to create a select statement to grab the text for the foreign key I'm looking up. In case 2, I want the text where type=1 but in case 1 I want the text where type=0.
I had started writing it as
select text from table where fk=334 and ( (type=4 and text is not null) or type=0 )
but this returns both rows. What I what is something that I think is more akin to
case a || case b
expression in programming - if case a evaluates as true, use that, otherwise evaluate case b and use if true, otherwise return false.
I hope you can understand what I'm trying to get and any suggestions would be much appreciated.
Everything works except for the select portion, I cant put my finger on what is wrong with this.. I included the trigger and error.. If one can show what I did wrong that would be great..Thanx..
SET QUOTED_IDENTIFIER ON GO ALTER TRIGGER [dbo].[arcit] ON [dbo].[active] AFTER UPDATE as begin begin tran
SET IDENTITY_INSERT Archive ON INSERT INTO Archive() SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'archive' order by ordinal_position fromInserted i inner join deleted d on d.grid = i.grid inner join [Active] a on a.grid = i.grid WHERE i.arc = 1 and isNull(d.arc,0) != 1
DELETE FROM a fromInserted i inner join deleted d on d.grid = i.grid inner join [Active] a on a.grid = i.grid WHERE i.arc = 1 and isNull(d.arc,0) != 1
commit tran end
Error Message
Msg 156, Level 15, State 1, Procedure arcit, Line 10 Incorrect syntax near the keyword 'from'.
I am attempting to write a function to Check the price of every disk and return the number of titles ont he disk which has the highest price. I do not even think that I am in the ballpark:
CREATE FUNCTION highest_price ( )
BEGIN
SELECT count(*) AS FROM Disk WHERE price = (SELECT max(price) FROM Disk);
document_area: doc_area_id(int) and doc_area_name(string). document_area_access: doc_area_id(int) and username(string).
I am trying to do a select statement in an sqldatasource in .net that will select all the document_area.doc_area_name's where the current users username is in the document_area_access using the doc_area_id to link the tables.
most my fields that I am interested in getting percentage values for have to be counted first.... I am having problems converting the counted values to percentages. I don't think I am doing it right...
I would greatly appreciate an example of a very simple matrix table with a counted value that displays percentages. I have found examples online but are part of a much more complex table and I can't seem to get thier formating to work on mine.
i want to write a database trigger to increment the salary by 10% for technicians who have done three tests on a particular date.
there are two employee types.(1)technicians (2)traffic controllers. employee category is defined in "Type" attribute of Employee table. the increment should happen only to technicians.thank you in advance.
