Stuck With A SQL2005 Installation

Aug 7, 2007

Hi there guys I am hitting my head against a brick wall trying to install SQL 2000 and SQL 2005 side by side and wonder if someone has a suggestion that may help please.


My operating system is win xp 32 bit, I have recently purchased this machine and it came with office 2007 already pre installed which comes with a named instance version of sql 2005 business contact manager, I then installed a default instance of sql 2000 (with SP 4)client tools and the server with no problem , I then purchased a cd of Microsoft SQL Server 2005 Standard Edition (32-Bit)for me to install to run alongside the 2000 version that is currently running on the same machine when all hell broke loose.

I selected the option saying install server components, tools , books online etc etc.

I agree to the licence agreement

Setup then installs Microsoft SQL Server 2005 Setup support Files succesfully, I press next...

Welcome to the Microsoft SQL Server installation wizard then comes up, I press next

System Configuration check brings back 14 successsful status messages and one warning message namely Edition Change Check warning
saying :

quote:Edition Change Check (Warning)
Messages
Edition Change Check

To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.

I ignore above and press Next..

It then comes up with registration information which i succesfully complete, pressing Next

I then select all the components to install and press next

I then set it up to be a named instance 'MSSQL2005DATA', fine >> pressed next

Then I set it up to run under the local system account , fine. >> pressed next.


Then using windows authentication mode pressed next >>

Left collation settings as per default pressed next >>

Install the default configuration in the report server installation options message box, I pressed next >> which then comes up with the following message :

(SQL Server Setup failed to obtain system account information for the ASPNET account.To proceed, reinstall the .net framework and then run SQL server Setup again)

i don't have a copy of the .net framework so I select the install but do not configure the server option.

Setup then comes up with Ready to install message box which i then press the install button, which shows the following:

Setup Progress Files Status:
SQL SETUP Support Setup Finished


OWC11 Setup failed, Refer to log

coming up with a error:

ERROR 1706 Setup cannot find the required files,Check your connection to the network, or cd rom, For other potential solutions to this problem, see c:Program FilesMicrosoft OfficeOffice111033Setup.chm


I then press ok

and the setup progress fails to install :

OWC11
SQL SErver Database Services
Analysis Services
Reporting Services
Notification Services
Integration Services
Workstation Components

but I can't view any of these log files the only one that is available to view is sqlsetup0014_PCName_OWC11_1.log which comes up with the same message

MSI (s) (78:48) [12:44:04:581]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (78:48) [12:44:04:581]: Note: 1: 1706 2: -2147483647 3: OWC11.MSI
MSI (s) (78:48) [12:44:04:581]: SOURCEMGMT: Processing URL source list.
MSI (s) (78:48) [12:44:04:581]: Note: 1: 1402 2: UNKNOWNURL 3: 2
MSI (s) (78:48) [12:44:04:581]: Note: 1: 1706 2: -2147483647 3: OWC11.MSI
MSI (s) (78:48) [12:44:04:581]: Note: 1: 1706 2: 3: OWC11.MSI
MSI (s) (78:48) [12:44:04:581]: SOURCEMGMT: Failed to resolve source
MSI (s) (78:48) [12:49:43:192]: Product: Microsoft Office 2003 Web Components -- Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOFFICE111033SETUP.CHM.

Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOFFICE111033SETUP.CHM.

I have tried installing office 2003 to get the 0wc11.dll but to no avail it still gives me the same error..

Sorry this is a long winded post but can anyone shed a ray of light here.

Thank you.

View 8 Replies


ADVERTISEMENT

Stuck Up With Reporting Service Installation

Apr 18, 2008



Hi All,
I have downloaded evaluation sample of SSRS for 120 days.
But myproblem is that while creating setup the server components and Report server is not installed.
Dut to that i cant run my report.It gives me error ,No report server was found .
I dont know what i missed? Anybody help me?
Its urgent.

Waiting for the reply.

View 5 Replies View Related

SQL2005 Std Edition Installation With CAL License

Jan 9, 2008

Hi how to install SQL 2005 Standard Edition with CAL License???

-Thanks N Regards,
Kanthi.

View 3 Replies View Related

SQL2005 SP2 Installation -starting Trouble

Jul 13, 2007

Hi,

I am running SQL2005 SP1 Standard Edition in Win2k3 , when i try to install SP2, at the initial stage itself it fails with login failure message. But with the same SA password i am able to login to the Management studio. I tried with Windows authentication , that also fails. Service is running with local system account and i am logged in the server using the administrator user.

Looks like i am missing something in the process.

Can anyone tell me what could be the issue?



Thanks in advance.

siva

View 3 Replies View Related

MS SQL2005 Express Ed + SSIS Installation Problem

Jun 22, 2007

Hi,

I have tried to install SSIS going steps msdn2 using "mssql setup" but my "ssis" option is not available for installation.

Pls, help!

View 4 Replies View Related

SQL2005 Installation Errr After Installing VS2008

Mar 12, 2008

Dear,

I Had VS20005 and SQL 2005 Working perfectly. For some errors, I did formatted my PC and installed VS2008. After doing that, I am trying to install MSSQL2005, when installation be in "Integration development environment with 2005" Phase, An error appears, and the installation stopped. What I have to Do to solve this?
Note: I ahve XPSP2 32 bit installed.

View 5 Replies View Related

Installation Of SQL2005 Enterprise(English Version) Under Different Lanuage Verion Of Windows 2003

May 6, 2008

I found sql2005 Enterprise cannot be installed under Simplied Chinese win 2003, the only thing i suspect is that win2003 is an envaluation copy with netframework 2.0 be installed.

View 1 Replies View Related

MAJOR PROBLEM: New SQL2005 Installation Performance Problem.

Sep 26, 2006

We are experiencing a major issue since upgrading from SQL2000 to SQL2005 over the weekend. Starting today, it appears that the performance of SQLServer reaches a limit every 15 minutes.

Our configuration is as follows:

Window Server 2K3 x64 Enterprise

SQLServer 2005 x64 Enterprise

HP DL585 with 4 dual core Opterons

32 GB of RAM

2 TB EMC SAN

At first, I thought there was a memory pressure problem, since I had the default max memory set. After changing the max memory to only 25 GB (out of 32 available), the issue went away temporarily. However, after 15-20 minutes, the number of batches/sec dropped in half, and remained after half until I changed the max memory setting again. Over the course of the day, I was able to fix the issue each time by just changing the max memory by 1MB. (From 30,000 to 29,999 and back from 29,999 to 30,000). Each time, the batches/sec counter immediately doubles and remains there for about 15-20 minutes. None of the SQL statements have changed since upgrading.

I have found this post, which talks about a similar issue at the end of the thread:

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=746299&SiteID=1

Any ideas?...this is frustrating to no end.

Thanks!

Ryan

View 8 Replies View Related

Sql2005 Database Restore From Another Sql2005 Backup File Error.

Dec 15, 2005

hi

i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :

 

 

TITLE: Microsoft SQL Server Management Studio Express
------------------------------

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)

------------------------------
ADDITIONAL INFORMATION:

Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------


 

 

 

pls some one can help me ???

 

thanks

chaus

View 62 Replies View Related

Can You Open A Database Created In SQL2005 In SQL2005 Express?

Oct 12, 2007



Can you open/use a database created in SQL2005 in SQL2005 Express?

Thanks for the help!

Max

View 4 Replies View Related

Upgraded SQL2000 To SQL2005, SQL2005 VERY Slow

Dec 27, 2005

I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?

View 3 Replies View Related

Sql2005 Standard To Sql2005 Enterprise Edition

Jan 4, 2007

Hi

We have Sql2005 x64 bit standard edition server installed in windows 2003 64 bit editio server,

currently due to buisness requirements we need to have sql2005 x64 bit enterprise edition, please let me know how do i do the upgrade or change.

is it possible to retain all our custom settings in the standard edition after changing to enterprise edition.

This has to be done for our production and very critical, please help



Thanks

Samuel I

View 4 Replies View Related

Install Sql2005 32 Bit After Removing Sql2005 64 Bit

Sep 19, 2007



I am unable to install 32-bit SQL Server Integration Services on the server due to something that was left behind by the 64-bit version.


I've uninstalled SQL Server 2005 64-bit and when I try to install the 32-bit version of Integration Services, I get this error: "Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error descrition: FATAL: Could not find component 'Microsoft.SqlServer.Dts.Task.MessageQueueTask.ServCompMQTask' we just installed."




I can't seem to figure out how to resolve this problem with the COM+ and I can't remember if Integration Services is required.

Can anybody please advise?

View 1 Replies View Related

Migrating Sql2005 Vb Dts Package To Sql2005

Jul 8, 2007

Hello,



I have a vb program that include a dts package that has been saved to vb with sql2000 dts wizard and works very good.



Now that I upgrade my website to sql2005, this vb dts package doesn't work.

The error I get is:



Microsoft Data Transformation Services (DTS) Package

Invalid STDGMEDIUM structure

(Microsoft Data Transformation Services (DTS) Package (80040066): Invalid STDGMEDIUM structure

) (Microsoft SQL-DMO (ODBC SQLState: 42000) (80004005): [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ')'.)



I searched in the internet how to make dts package in sql2005 and save it to vb and found no information about it.

What Can I do to get the vb code of the dts package I create in sql2005 or how do i migrage the sql2000 vb dts package code to sql2005?



Thanks,

Kubyustus









View 4 Replies View Related

SQL Tools :: SSDT For VS2012 Installation Fails With (Same Architecture Installation) Error

Mar 9, 2013

The 6:th of march Sql server data tools for Visual Studio 2012 was released.

[URL]

I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).

why I'm getting this installation error.

View 14 Replies View Related

Error Installing SQL Server2000: A Previous Program Installation Created Pending File Operations On The Installation Machine

Oct 2, 2005

I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq

View 3 Replies View Related

MSDE Installation Fails Due To Detection Of Previous Installation

Jul 23, 2005

Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?

View 1 Replies View Related

Express Installation Fails With Invalid Installation Package

May 3, 2006

I get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.



I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.



Any help would be greatly appreciated.



Below is the Summary.txt output file.



Microsoft SQL Server 2005 9.00.2047.00

==============================

OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)

Time : Wed May 03 09:54:23 2006



CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.

Machine : CPCWIN2KVM1

Product : Microsoft SQL Server Setup Support Files (English)

Product Version : 9.00.2047.00

Install : Successful

Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log

--------------------------------------------------------------------------------

Machine : CPCWIN2KVM1

Product : SQL Native Client

Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.

--------------------------------------------------------------------------------

Machine : CPCWIN2KVM1

Product : Microsoft SQL Server Native Client

Product Version : 9.00.2047.00

Install : Failed

Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log

Last Action : InstallFinalize

Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.

Error Number : 1706

--------------------------------------------------------------------------------

Machine : CPCWIN2KVM1

Product : Microsoft SQL Server VSS Writer

Product Version : 9.00.2047.00

Install : Successful

Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log

--------------------------------------------------------------------------------

Machine : CPCWIN2KVM1

Product : MSXML 6.0 Parser

Product Version : 6.00.3883.8

Install : Successful

Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log

--------------------------------------------------------------------------------

View 4 Replies View Related

Linking SQL2005 On 64-bit To SQL2005 On 32-bit OS.

Nov 13, 2006

I have some production boxes on Win 2000 32-bits OS and some production servers have been upgraded to Win2003 64-bit OS runing SQL Server 2005. There are also a number of Win2003 32-bit OS running SQL 2005.

The issue is that when linking the 64-bit production servers to the 32-bit boxes running SQL 2005 / Win 2003 OS, the linking seems to succeed, but I am unable to see a number of entries in sys.objects. Typically, these objects are User Stored Procedures.

Moreover, the linking seemed to have worked, but data extraction does not take place between the servers. However, there are no errors. The objects (user stored procs) exist on the 64-bit side, but linking does not actually happen.

Microsoft KB has addressed this in SQL 2000 case in this KB article, but has not suggested a solution for SQL 2005.

Any ideas? Has anyone else encountered this?

Thanks.

View 1 Replies View Related

Almost Done But Stuck

Oct 16, 2007

Ok I have created a 2005 sql advanced database with text indexing. I have create the database like so
 created a new database with text indexing enabled and the following table
create table support (problemId VARCHAR(50) NOT NULL PRIMARY KEY, problemTitle varchar(50) NOT NULL, problemBody text NOT NULL, linkOne varchar(50), linkTwo varchar(50), linkThree varchar(50), linkFour varchar(50), ftid int NOT NULL)
next
create fulltext catalog remoteSupportCatalog
create unique index ui_remotesupport ON support (ftid)
then
create fulltext index on support(problemBody)key index PK__support__7C8480AE on remoteSupportCatalog
--------
I then populated some rows and issues a  quesry
Select * from support where freetext(problemBody, 'test database')
it works pulls back all the data I expected it to pull back
 
In my asp page I created a database connection with the folling select command
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:rsdb2ConnectionString2 %>"
SelectCommand="SELECT * FROM support WHERE FREETEXT(problemBody, @srchBox)">
 
created the search parameter<SelectParameters>
 <asp:ControlParameter ControlID="srchBox" PropertyName="Text" Type="String" Name="srchBox" />  //this is a text box that is searchable with a button
</SelectParameters>
and it doesnt give me back an error or data it does nothing. What am I missing?????

View 7 Replies View Related

Stuck

Aug 4, 2006

I hate making complecated queries....but this doesn't seem too hard and I cannot figure out where my error is. The message is "Incorrect syntax near the keyword 'FROM'."

The query is:
SELECT tblUsers.lUserID GROUP BY tblUsers.lUserID HAVING Count(tblDLHistory.lDownloadID) = 0 FROM tblUsers LEFT JOIN tblDLHistory ON tblUsers.lUserID = tblDLHistory.lUserID WHERE tblDLHistory.lVersionID = 5

The tables are

tblUsers
_______
lUserID

tblDLHistory
__________
lDownloadID
lUserID
lVersionID

What on earth am I doing wrong?

View 3 Replies View Related

Stuck

Mar 6, 2008

I need to search the database and pull up all customers who have a 'device' and their email address. I have watered down my select statement, but the following is the basics of it. I just cannot figure out how to also append the email. I have tried many different attempts and have come up dry.

Select a.company
From dbo.contact1 as a,
(
Select DISTINCT accountno
From dbo.contsupp
Where contact LIKE 'Product Inventory' AND contsupref LIKE '%device%'
) as b
Where a.accountno = b.accountno

Below are some sample databases to get an idea of some possibilities. There will not always be an entry in dbo.contsupp for an email address. There will not always be an entry in dbo.contsupp for a device.

------------------------
|dbo.contact1 |
|------------------------|
|accountno | company |
|------------------------|
|5123 | Alpha |
|4158 | Beta |
|2121 | Gamma |
|5555 | Omega |
------------------------

--------------------------------------------
|dbo.contsupp |
|--------------------------------------------|
|accountno | contact | contsupref |
|--------------------------------------------|
|5123 |Product Inventory|device 01 |
|2121 |product note |the note |
|2121 |Product Inventory|device 02 |
|5123 |Email Address |a@b.com |
|4158 |ladkafndkaldkfna |device stopped|
--------------------------------------------

**note: i am using MSSQL 2000

View 2 Replies View Related

Last Row Got Stuck

Feb 27, 2004

Hello,

I have a small table to manage orders in my company. When a new order is entered, the script makes use of the last row of the table to find out the last order, increments it and creates the new order number. The problem is, a few days ago the last row got stuck. New insertions to the table all got the same order number and are placed above the last row. Anybody has any idea what's going on?

View 3 Replies View Related

I'm Stuck

Jun 15, 2008

Hi

I am completely stuck trying to make a query

Heres is a shorten downed example of what I am trying to achieve. I have four tables. The first being OrderHeader, the second OrderLines, the third StockCategory. The OrderHeader table contains basic order details, which in turn is linked to the OrderLines table which show if the order in the OrderHeader has a single or multiple order lines. The StockCategory table shows what stock group the item in each order line is associated to.

Here is an example of the tables in a shorten downed version (in both data and fields):

OrderHeader:
Sales Order Ref, Order Date,
1, 01/05/2008
2, 01/05/2008
3, 02/05/2008
4, 02/05/2008

OrderLines:
Sales Order Ref, Part Number
1, 222
1, 234
1, 333
2, 222
2, 555
2, 444
3, 333
3, 111
4, 222

StockCategory

Stock Category, Part Number,
A, 222
B, 234
C, 333
D, 444
E, 111

Stock Group:
Stock Group, Stock Category, Priority
Berr, A, 1
Berr, B, 1
OGD, C, 2
OGD, D, 2
DFID , E, 3




The thing I am trying to do is assign each of the orders to a Stock Group which I can do. The thing that has baffled me is if an two of the order lines in one order are assigned to different stock groups. If this occurs I want to assign the order to the order to the stock group with the highest priority (1 being highest, 3 being lowest) for example if one order line in the order was assigned to Berr (priority 1) and the other to DFID (priority 3) the order would be assigned to Berr.

I am using the following query:


DECLARE @Period DATETIME
DECLARE @BeginDate DATETIME
DECLARE @EndDate DATETIME

SET @Period =’2008-05-01’

SELECT @BeginDate = [BeginDate] FROM DatePeriods AS dp WHERE dp.ID = @Period
SELECT @EndDate = [EndDate] FROM DatePeriods AS dp WHERE dp.ID = @Period


SELECT
COUNT(oh.[Sales Order Reference])
FROM dbo.OrderHeaders AS oh
LEFT JOIN dbo.OrderLines AS ol ON oh.[Sales Order Reference] = ol.[Sales Order Reference]
LEFT JOIN dbo.StockCategories AS sc ON ol.[Part Number] = sc.[Part Number]
WHERE oh.[Order Date] BETWEEN @BeginDate AND @EndDate
AND sc.[Stock Group] IN (SELECT sg.[Stock Group] FROM dbo.StockGroup AS sg WHERE sg.[ID] = 'Berr')
AND ol.[Sales Order Reference] NOT IN (SELECT col.[Sales Order Reference]
FROM dbo.CancelledOrderLines AS col
WHERE col.[Part Number] = ol.[Part Number])

GROUP BY oh.[Sales Order Reference]

Is this possible to do?

Thanking you in advance!!!

View 6 Replies View Related

Stuck On XML

Jun 23, 2008

Hi,

Been spinning on this for whole weekend I can't seem to get what you I want. I have the following xml result from my query. As you notice one of the child elements has the tag identifier VJobs, how can I make it so it says 'task' instead?

<task id="2" name="Saw 1" color="#99ccff" expand="true" />
<task id="3" name="Saw 2" color="#99ccff" expand="true" />
<VJobs id="3" name="Layout#" color="#99ccff">
<customproperty taskproperty-id="tpc0" value="Unknown" />
<customproperty taskproperty-id="tpc1" value="17.938 " />
<customproperty taskproperty-id="tpc2" value="Unknown" />
<customproperty taskproperty-id="tpc3" value="0" />
<customproperty taskproperty-id="tpc4" value="Operator Unknown" />
</VJobs>
</task>

Here is the query, which details jobs to be done on different equipments
SELECT EquipmentID + 1 as id,
EquipmentDescr as [name],
'#99ccff' AS color,
'true' AS [expand],
(SELECT JobID + 2AS id,
'Layout#' AS [name],
'#99ccff' AS color,
(SELECT [taskproperty-id] AS [taskproperty-id],
[value] AS [value]
FROM dbo.JobDetails customproperty
WHERE customproperty.JobID = VJobs.JobID
FOR XML AUTO, TYPE)
FROM VJobs
WHERE VJobs.EquipmentID = task.EquipmentID
FOR XML AUTO, TYPE)
FROM VEquipments task
ORDER BY EquipmentDescr
FOR XML AUTO, TYPE

View 6 Replies View Related

Stuck With ConnectionString Please ---&>H.E.L.P.&<---

Jun 25, 2007

Hello, Well actually I am beginner to ASP.Net, I am working on Microsoft Virtual PC with VS 2005 and SQL Server 2005 installed. Now when Create web application in Studio  all works fine with databases but when i try to write some code for accessing SQL Databases I keep getting this error PLZ heLP.Following is my code<% @ Import Namespace="System.Data" %><% @ Import Namespace="System.Data.SqlClient" %><html><script language="C#" runat="server" Debug="false" >SqlConnection sqlcon;protected void Page_Load(Object Src, EventArgs e){    sqlcon=new SqlConnection("Data Source=VS02005;Initial Catalog=Gaurav;Integrated Security=True");        SqlDataAdapter sqlcom = new SqlDataAdapter("select * from Employee", sqlcon);     DataSet ds = new DataSet();    sqlcom.Fill(ds,"Employee");    DataGrid1.DataSource = ds.Tables["Employee"].DefaultView;    DataGrid1.DataBind();}</script><form runtat="server">    <asp:datagrid id="DataGrid1" runat="server" /></form></html>This is the error i am gettingServer Error in '/' Application.--------------------------------------------------------------------------------SELECT permission denied on object 'Employee', database 'Gaurav', schema 'dbo'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SELECT permission denied on object 'Employee', database 'Gaurav', schema 'dbo'. I am stuck dont know what to do, I hve checked all permissions for user gaurav, I also gave administrator rights to gaurav but nothing is working PLEASE help me. 

View 4 Replies View Related

I'm Stuck With COUNTING

Jan 31, 2008

Sorry for all the code below. I am realizing that my DB design is bad but I already have 7 pages built around it that work fine...until now, so I would really like to not change the DB if possible. My table has 22 columns: iID which is the identity colum. Then there is iAsmtID which is the assessment ID. Lastly there are 20 colums- q1 through q20, each of which will have a 1, 2, or 3, depending on the radio buttons the user clicked. Nows my problem. I have to find a percent for the assessment. It works like this. 3s are NA so we are not worried about them now. I need to find the number of ones and the number of twos for each assessment ID. Then add those together and divide by the number of ones. How can I find the number of the ones and twos. I have below but its not working. Says there is incorrect syntax at the ',' which is a different color below. Any and all help appreciated.'Open connectionset conn=Server.CreateObject("ADODB.Connection")conn.open My_Connset rs = Server.CreateObject("ADODB.Recordset")str = "SELECT SUM((CASE WHEN q1=1 THEN 1 ELSE 0 END)+(CASE WHEN q2=1 THEN 1 ELSE 0 END)+(CASE WHEN q3=1 THEN 1 ELSE 0 END)+(CASE WHEN q4=1 THEN 1 ELSE 0 END)+(CASE WHEN q5=1 THEN 1 ELSE 0 END)+(CASE WHEN q6=1 THEN 1 ELSE 0 END)+(CASE WHEN q7=1 THEN 1 ELSE 0 END)+(CASE WHEN q8=1 THEN 1 ELSE 0 END)+(CASE WHEN q9=1 THEN 1 ELSE 0 END)+(CASE WHEN q10=1 THEN 1 ELSE 0 END)+(CASE WHEN q11=1 THEN 1 ELSE 0 END)+(CASE WHEN q12=1 THEN 1 ELSE 0 END)+(CASE WHEN q13=1 THEN 1 ELSE 0 END)+(CASE WHEN q14=1 THEN 1 ELSE 0 END)+(CASE WHEN q15=1 THEN 1 ELSE 0 END)+(CASE WHEN q16=1 THEN 1 ELSE 0 END)+(CASE WHEN q17=1 THEN 1 ELSE 0 END)+(CASE WHEN q18=1 THEN 1 ELSE 0 END)+(CASE WHEN q19=1 THEN 1 ELSE 0 END)+(CASE WHEN q20=1 THEN 1 ELSE 0 END) AS [color:#FF0000]CountOfOnes,SUM[/color]((CASE WHEN q1=2 THEN 1 ELSE 0 END)+(CASE WHEN q2=2 THEN 1 ELSE 0 END)+(CASE WHEN q3=2 THEN 1 ELSE 0 END)+(CASE WHEN q4=2 THEN 1 ELSE 0 END)+(CASE WHEN q5=2 THEN 1 ELSE 0 END)+(CASE WHEN q6=2 THEN 1 ELSE 0 END)+(CASE WHEN q7=2 THEN 1 ELSE 0 END)+(CASE WHEN q8=2 THEN 1 ELSE 0 END)+(CASE WHEN q9=2 THEN 1 ELSE 0 END)+(CASE WHEN q10=2 THEN 1 ELSE 0 END)+(CASE WHEN q11=2 THEN 1 ELSE 0 END)+(CASE WHEN q12=2 THEN 1 ELSE 0 END)+(CASE WHEN q13=2 THEN 1 ELSE 0 END)+(CASE WHEN q14=2 THEN 1 ELSE 0 END)+(CASE WHEN q15=2 THEN 1 ELSE 0 END)+(CASE WHEN q16=2 THEN 1 ELSE 0 END)+(CASE WHEN q17=2 THEN 1 ELSE 0 END)+(CASE WHEN q18=2 THEN 1 ELSE 0 END)+(CASE WHEN q19=2 THEN 1 ELSE 0 END)+(CASE WHEN q20=2 THEN 1 ELSE 0 END) AS CountOfTwos FROM ITCC_Test WHERE iAsmtID="&iAsmtIDresponse.Write(str)rs.open str, connif rs.eof = true then ' response.Write("<h2>No count done</h3>") response.End()else'Declare variables CountOfOnes = rs("CountOfOnes") CountOfTwos = rs("CountOfTwos")end ifrs.closeset rs = nothingconn.close'set conn = nothing

View 2 Replies View Related

Job Stuck While Executing

Nov 29, 2001

Hi All

I have a job that extracts data from 10 different tables to 10 diffrenet tables of MS-Access (.mdb file).
The job ran okay since last one month but yesterday it ran and did not stop at all .Status is shown as "Executing" ..
I tried to stop it but it is not stopping . I tried to kill associated process (spid) but it allows me to kill spid but it shows there running.

Any idea why it is happening ?

If any body ahs any solution you can call me at 1 860 520 7454.

Sujit

View 1 Replies View Related

Query Help - I'm Stuck

Oct 25, 2006

I have a table with 4 relevant fields (blank lines added for clarity).
State, City, Name, Primary_Contact
IL, Springfield, Bill, n
IL, Springfield, Frank, n
IL, Springfield, Larry, n

IL, Bloomington, Steve, n
IL, Bloomington, Chris, y

IL, Chicago, Betty, n
IL, Chicago, Linda, n
IL, Chicago, Sue, n

I need a query to return the state and cities that don't have a
Primary_Contact='y'
So the results would be:
IL, Springfield
IL, Chicago

That's it. Any help is greatly appreciated.

View 6 Replies View Related

Stuck On This Query

Nov 11, 2004

I need the results from the following query to be with the results of the second query. Any ideas?


Code:


SELECT
PR.WBS1, PR.WBS2, PR.WBS3, PR.Fee, PR.ConsultFee, PR.ReimbAllow, PR.LongName, PR.Name, CL.Name AS CLIENTNAME,
CLAddress.Address2 AS CLIENTADDRESS2, CLAddress.Address3 AS CLIENTADDRESS3, CLAddress.Address4 AS CLIENTADDRESS4,
CFGMain.FirmName, CFGMain.Address1, CFGMain.Address2, CFGMain.Address3, CFGMain.Address4,
Contacts.FirstName + ' ' + Contacts.LastName AS CONTACT, LB.AmtBud, LB.BillBud

FROM PR LEFT OUTER JOIN
Contacts ON PR.ContactID = Contacts.ContactID LEFT OUTER JOIN
CL ON CL.ClientID = PR.ClientID LEFT OUTER JOIN
CLAddress ON CL.ClientID = CLAddress.ClientID LEFT OUTER JOIN
LB ON LB.WBS1 = PR.WBS1 AND PR.WBS2 = LB.WBS2 AND LB.WBS3 = PR.WBS3
CROSS JOIN
CFGMain
Where pr.wbs1 = '001-298' and pr.wbs3 != 'zzz'



and


Code:


SELECT *
FROM LD
WHERE (BilledPeriod = '200408') AND (WBS1 = '001-298')



Thanks.

View 4 Replies View Related

Stuck With OR Condition

Aug 25, 2006

Hi,

I have a sql problem I'm trying to solve. I'm selecting from a table based on a foreign key, and the select returns 2 rows. The table has a column called type, and each row for the foreign key has a different type value. Hopefully the example below can help to explain:

Case 1:

PK | FK | Type | Text
--------------------------
1 | 226 | 0 | some text goes here
2 | 226 | 1 | NULL

Case 2:

PK | FK | Type | Text
--------------------------
3 | 334 | 0 | some text goes here
4 | 334 | 1 | actual text I want to select is in this cell

I'm trying to create a select statement to grab the text for the foreign key I'm looking up. In case 2, I want the text where type=1 but in case 1 I want the text where type=0.

I had started writing it as

select text from table where fk=334 and ( (type=4 and text is not null) or type=0 )

but this returns both rows. What I what is something that I think is more akin to

case a || case b

expression in programming - if case a evaluates as true, use that, otherwise evaluate case b and use if true, otherwise return false.

I hope you can understand what I'm trying to get and any suggestions would be much appreciated.

Thanks in advance,
Peter

View 2 Replies View Related

Newbie Stuck

Apr 2, 2008

I'ma newbie so please bare with me.

I have two tables, they are tomcat and eagle. With column's named Id, speed, ceiling, range, and data in all the fields.

This is my query:

SELECT id
FROM tomcat INNER JOIN eagle
ON tomcat.id = eagle.id;

my error message:
Msg 209, Level 16, Stae 1, Line 1
Ambiguous column name 'id'

I'm using the book "Head First SQL" as a ref, without any luck. I'm using SQL 2005 express.

Any thoughts, I'm sure its a simple issue.
Thanks

US Navy - We are fueled, armed, and go for launch.

View 2 Replies View Related

Stuck On A Trigger

May 5, 2008

Everything works except for the select portion, I cant put my finger
on what is wrong with this.. I included the trigger and error..
If one can show what I did wrong that would be great..Thanx..


SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[arcit] ON [dbo].[active] AFTER UPDATE
as
begin
begin tran


SET IDENTITY_INSERT Archive ON
INSERT INTO Archive()
SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'archive' order by ordinal_position
fromInserted i
inner join deleted d
on d.grid = i.grid
inner join [Active] a
on a.grid = i.grid
WHERE i.arc = 1
and isNull(d.arc,0) != 1


DELETE FROM a
fromInserted i
inner join deleted d
on d.grid = i.grid
inner join [Active] a
on a.grid = i.grid
WHERE i.arc = 1
and isNull(d.arc,0) != 1

commit tran
end



Error Message

Msg 156, Level 15, State 1, Procedure arcit, Line 10
Incorrect syntax near the keyword 'from'.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved