Stumped -- Need A Set Based Solution
Dec 30, 2003
Guys ,
Here's my problem
Table Structure
create table holding (
id1 int,
id2 int,
datefield datetime,
holding int,
quantity int
)
go
insert into holding
select 1,1,'20031210',10,null
union
select 1,1,'20031211',30,null
union
select 1,1,'20031212',70,null
union
select 1,1,'20031213',60,null
union
select 1,2,'20031210',100,null
union
select 1,3,'20031210',100,null
union
select 1,3,'20031210',10,null
go
Quantity is based on Holding for the day - Holding for the previous transaction involving same id1 ,id2.
i.e result should look like this
id1 id2 datefield holding quantity
----------- ----------------------------------------------------------------- ----------- -----------
1 1 2003-12-10 00:00:00.000 10 10
1 1 2003-12-11 00:00:00.000 30 20
1 1 2003-12-12 00:00:00.000 70 40
1 1 2003-12-13 00:00:00.000 60 -10
1 2 2003-12-10 00:00:00.000 100 100
1 3 2003-12-10 00:00:00.000 100 100
1 3 2003-12-11 00:00:00.000 10 -90
View 4 Replies
ADVERTISEMENT
Mar 15, 2006
Thought I'd got my head round using a set-based approach but my brain's gone dead on this one
CREATE TABLE #mytable (SWID INT , T INT , DateA DATETIME , DateB DATETIME)
INSERT #mytable (swid , t , DateA , DateB)
SELECT 63967 , 1 , CAST('31-Mar-2006' AS DATETIME),CAST( '01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 1 , CAST('31-Mar-2006' AS DATETIME),CAST( '01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 , CAST('31-Jan-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '31-Jan-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 1 ,CAST('31-Mar-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 1 ,CAST( '31-Mar-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 0 , CAST('15-Mar-2006' AS DATETIME), CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST( '01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) ,CAST( '01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Jan-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Jan-2006'AS DATETIME), CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 , CAST('31-Dec-2005'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Dec-2005' AS DATETIME), CAST('01-Feb-2007' AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST('30-Nov-2005'AS DATETIME) , CAST( '01-Aug-2006' AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '30-Nov-2005' AS DATETIME), CAST('01-Feb-2007' AS DATETIME)
select * from #mytable order by SWID desc, DateA desc
The Columns where T values are 1 and 0 are OK having already been derived. I need to UPDATE the remaining rows from the Default T Value of 9999
to Decrementing values (starting at -1) commencing at the highest remaining (ie non 9999 T Value) DateA value and working 'backwards'
'grouping' on SWID
The DateB value is irrelevant for this purpose
The desired output is below with derived T values
SWIDTDateADateB
6396712006-03-31 00:00:00.0002006-08-01 00:00:00.000
6396712006-03-31 00:00:00.0002007-02-01 00:00:00.000
6396702006-03-15 00:00:00.0002006-08-01 00:00:00.000
6396702006-03-15 00:00:00.0002007-02-01 00:00:00.000
63967-12006-02-28 00:00:00.0002006-08-01 00:00:00.000
63967-12006-02-28 00:00:00.0002007-02-01 00:00:00.000
63967-22006-01-31 00:00:00.0002006-08-01 00:00:00.000
63967-22006-01-31 00:00:00.0002007-02-01 00:00:00.000
1005112006-03-31 00:00:00.0002006-08-01 00:00:00.000
1005112006-03-31 00:00:00.0002007-02-01 00:00:00.000
1005102006-03-15 00:00:00.0002006-08-01 00:00:00.000
1005102006-03-15 00:00:00.0002007-02-01 00:00:00.000
10051-12006-02-28 00:00:00.0002006-08-01 00:00:00.000
10051-12006-02-28 00:00:00.0002007-02-01 00:00:00.000
10051-22006-01-31 00:00:00.0002006-08-01 00:00:00.000
10051-22006-01-31 00:00:00.0002007-02-01 00:00:00.000
10051-32005-12-31 00:00:00.0002006-08-01 00:00:00.000
10051-32005-12-31 00:00:00.0002007-02-01 00:00:00.000
10051-42005-11-30 00:00:00.0002006-08-01 00:00:00.000
10051-42005-11-30 00:00:00.0002007-02-01 00:00:00.000
Thanks in advance
View 3 Replies
View Related
Jan 8, 2004
CREATE TABLE [Cube_fact_table] (
[ISIN_ID] [bigint] NOT NULL ,
[CLIMSTID] [bigint] NOT NULL ,
[HOLDID] [bigint] NOT NULL ,
[Quantity] [bigint] NULL ,
[Holding] [numeric](15, 0) NOT NULL ,
[Cost] [numeric](18, 3) NOT NULL ,
[Close_Price] [numeric](18, 3) NOT NULL ,
[Tran_Value] [bigint] NULL ,
[Date] [datetime] NULL ,
[UCOA] [bigint] NULL ,
[COA] [bigint] NULL
) ON [PRIMARY]
GO
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('1', '1', '1', '2000', 2000, 170.100, 170.100, '340200', '11/28/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('1', '1', '3', '-1000', 1000, 185.500, 185.500, '-185500', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '5', '48600', 48600, 225.000, 225.000, '10935000', '11/27/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '8', '-48575', 25, 243.000, 243.000, '-11803725', '12/4/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '9', '12575', 12600, 254.000, 254.000, '3194050', '12/5/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '10', '-12120', 480, 232.000, 232.000, '-2811840', '12/5/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '11', '12120', 12600, 219.000, 219.000, '2654280', '12/6/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '12', '-12120', 480, 265.000, 265.000, '-3211800', '12/6/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '13', '4261', 4741, 224.000, 224.000, '954464', '12/8/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '14', '9059', 13800, 223.000, 223.000, '2020157', '12/11/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '15', '10200', 24000, 233.000, 233.000, '2376600', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '16', '-12188', 11812, 243.000, 243.000, '-2961684', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '17', '12188', 24000, 234.000, 234.000, '2851992', '12/13/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '18', '-12188', 11812, 234.000, 234.000, '-2851992', '12/13/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '19', '788', 12600, 254.000, 254.000, '200152', '12/16/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '20', '8000', 20600, 223.000, 223.000, '1784000', '12/17/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '21', '-13754', 6846, 231.000, 231.000, '-3177174', '12/17/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '22', '10554', 17400, 245.000, 245.000, '2585730', '12/19/2003 12:00:00 AM', NULL, NULL)
Now what i want to do is this ...
UCOA is to be updated with the average of all previous transactions where the climstid and isin_id are the same.
example
take case where holdid(transaction no) in the sample data is 14.
What i need is a query which will sum up the data in the tran_value column upto holdid 5.
Again I need a set based solution. Gurus .. please help
View 3 Replies
View Related
Jun 28, 2006
How can I get a all the Tickets Information related to one chain
If you see TicketID = 9 This has been replaced by TicketID 1571,
If you see TicketID = 12 This has been replaced three times.
If I pass 1574 to a SP , I need the whole chain ( i.e 1574 , 1573 , 1572 , 12 ) .
Is there a SET Based Solution for this
TicketID OldTicketID CancelReplaceStatus
----------- ----------- -------------------
2 NULL NULL
3 NULL NULL
4 NULL NULL
5 NULL NULL
6 NULL NULL
7 NULL NULL
9 NULL R
1571 9 NULL
10 NULL NULL
11 NULL NULL
12 NULL R
1572 12 R
1573 1572 R
1574 1573 NULL
Thx in Advance
Venu
View 2 Replies
View Related
Apr 23, 2008
Greetings all,
Looking for a set based solution to the following SQL problem. I've got a solution that uses a while loop but I have a feeling that there is a better way to do this!
I will use a simplified dataset as an example as I don't want to swamp you with too much detail about my real table structures etc...
I have the following tables (plus some sample data) :
insert into dbo.VehicleModel
select 1, 'RT 100', NULL union all
select 2, 'TGB ACKROS TEC', NULL union all
select 3, 'TB 50 PREDATOR 2', NULL union all
select 4, 'TGB 409 CRUISE 50', NULL union all
select 5, 'ESCOR SUPER SONIC 400SL', NULL union all
select 6, 'SUPER SONIC 150 XI', NULL union all
select 7, 'RT X 350 SERIES', NULL union all
select 8, 'TB SALON 4000', NULL
create table dbo.VehicleModelNorm (
VehicleModelNormIdint
,VehicleModelNormvarchar(100)
)
insert into dbo.VehicleModelNorm
select 1, 'ACE' union all
select 2, 'TGB ACKROS' union all
select 3, 'SUPER SONIC' union all
select 4, 'TB 50' union all
select 5, 'RT' union all
select 6, 'TGB' union all
select 7, 'RT' union all
select 8, 'TB SALON'
What I need to do is update the VehicleModelNorm column in VehicleModel with the relevant ID from the VehicleModelNorm table. Sounds easy enough BUT here is the catch. In my vehicles table the VehicleModel are the actual vehicle model names. In my vehicleNorm table I have a more generalized name. What I want to do is look at each VehicleModel, try to find a match in the VehicleModelNorm table, if there is no match then chop off the last word and look again.
For example, starting with 'RT 100 7 SERIES', I want to try to find an exact match for that in my vehicleModelNorm table. If there is no match, remove the last word and look for 'RT 100 7' then look for 'RT 100' etc...
How can I do this in a set based solution? I can do this with a WHILE loop but I have a feeling it might be possible to do this with a CTE but I just can't get my head round it.
Your advice would be much appreciated!
View 20 Replies
View Related
Feb 13, 2002
Hi there!
Here is my situation:
table 'ReceiptHeader'
IDCustomerIDDateCreated
1225102/06/2002
1332102/09/2002
1444002/15/2002
table 'ReceiptDiscount'
IDDiscountIDReceiptHeaderIDAmount
111210.00
241250.00
311325.00
**a receipt can have multiple discounts**
Table 'ReceiptDetail'
ReceiptHeaderID LineItemIDTotal
121155.33
131145.33
141241.66
**for this example there is only one line item per receipt**
Without using a cursor, i would like to return a result set
like this one below using a set based solution...
ReceiptIDCustomerIDDiscountTotal
1225160.00155.33
1332125.00145.33
144400.00241.66
Thanks,
SF
View 1 Replies
View Related
Jul 28, 2005
Im stumped on my SQL connection string when using the "SQLGridSelectedView" module. The tables im accessing reside in the same database as DNN on the local machine. My current string is "Provider=SQLOLEDB;Server=ADVANCED02;DATABASE=XP;Trusted_Connection=TRUE"My SQL statement as a test was a simple select all ...... "SELECT * FROM atm info"The error im getting is that ASPNET is not a trusted user"System.Data.OleDb.OleDbException: Login failed for user 'ASPNET'. Reason: Not associated with a trusted SQL Server connection. at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) at System.Data.OleDb.OleDbConnection.InitializeProvider() at System.Data.OleDb.OleDbConnection.Open() at DNNAdditional.SQLGridSelectedView.DisplayGrid(String psSortExpr, Boolean pbExport)"/TIA
View 1 Replies
View Related
Feb 1, 2005
I am migrating from MS Access and MySql to MS SQL 2000. I guess the first step is to load MSDE on my computer. My platform is Win XP Office
I am not sure what to expect, but this sure appears to be one of the most complicated procedures I have ever encountered. So I assume that I some how got off on a tangent.
Basically I just want a simple ability to create databases on Websites and transfer the data from existing databases on another Website.
What am I doing wrong?
What am I missing here?
Here is what I have done.
I downloaded the MSDE file MSDE2000A.exe
When I executed MSDE2000A.exe that installed a files in a directory MSDERelA
When I tried to run setup.exe in the directory MSDERelA, the process was aborted with the following comment
"A strong password is required for security reasons."
Then following the instructions on "How to Chane Your SA Password" I received the following.
'osql' is not recognized as an internal or external command,
operable program or batch file.
View 3 Replies
View Related
Jan 9, 2007
This one has the expert in SQL Express stumped and he suggested I try posting here. My problem is that I am trying to load SQL Express and can not do so.
Mike Wachal - MSFT wrote:
mnn2501 wrote:
I am having a similar problem, I first used the uninstall program which failed, then went to add remove programs finding nothing, then went to windows explorer and deleted what looked to be obvious choices. I still can't get sql express to install - any idea's?
Here are the logs:
Product "{2AFFFDD7-ED85-4A90-8C52-5DA9EBDC9B8F}" versioned 9.00.1116 is not compatible with current builds of SQL Server.Expected at least version: 9.00.1399.00
The Product Name is "Microsoft SQL Server 2005 Express Edition CTP"
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
This error indicates that you have a pre-RTM CTP version of Express on your computer that you did not remove correctly. You will need to remove all pre-release software before you can install the released software. Try to remove components from Add/Remove programs first. If that fails, or if nothing is listed, manually remove the product using the product id listed in the log like this:
msiexec.exe /x {2AFFFDD7-ED85-4A90-8C52-5DA9EBDC9B8F}
Mike
Thank you for your answer, I tried doing the msiexec.exe /x {2AFFFDD7-ED85-4A90-8C52-5DA9EBDC9B8F} but came up with this pop up error message when I did and I am lost.
The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is" Failed to read property "Installlds" {"MachineConfiguration","","BEAST"} from cache Unable to write property into cache. IsClustered
Unable to write property in cache:"IsClustered":
XmlRW Error: Failure loading xmlre.dll
CheckAllProcedures() returned:2
Any more ideas?
That one has me stumpt. I would suggest that you post this question into the Setup and Upgrade forum so the folks that specialize in the technology can offer suggestions.
Anyone here have any ideas for me?
Thanks
Mike D (mnn2501)
View 1 Replies
View Related
Sep 19, 2005
Here is the table:CREATE TABLE [child]([pk_child_id] [int] NOT NULL ,[fk_parent_id] [int] NOT NULL ,[code] [char] (2)NOT NULL ,[dt] [datetime] NOT NULL ,[newcode] [int] NULL)There is a situation where there will be more than one record with thesame [fk_parent_id] value, but different values for the [code]field.If one of those records has a [code]= 5, but the [dt] is AFTER asimilar record where [code]= 6 or [code]= 7 (but same [fk_parent_id]value), I need to set [newcode] = 10. How can I pull this off? Again,the group of records can have different [code] values, different [dt]values, but a common [fk_parent_id].Help!
View 4 Replies
View Related
Jul 20, 2005
SCENARIO:SQL Server 2000 Back End.The customer calls in with a problem and a QUERY is raised. The dateof creation of the record is in the fldDateQuery column.The user responds to the customer and a RESPONSE is raised. Itcontains the ID of the associated QUERY and the date of creation ofthe RESPONSE record is in the fldDateResponse column.The user wishes to know how many queries in the last month wereresponded to on the same day.CANDIDATE SQL:SELECT COUNT(*) AS NumResponsesFROM tblQueryINNER JOIN tblResponses ON tblQuery.fldQueryID =tblResponses.fldQueryIDWHERE (tblQuery.fldDateQuery < CONVERT(DATETIME,'2003-9-8 00:00:00',102))AND (tblQuery.fldDateQuery > CONVERT(DATETIME,'2003-8-8 00:00:00',102))AND (DATEDIFF(Day, tblQuery.fldDateQuery,tblResponses.fldDateResponse) <= 1)PROBLEM:If a query has more than one response raised on it within a day of thequery being logged, it counts all those responses. In other words,the SQL counts the number of matching RESPONSES, and not the number ofQUERIES.TIAEdward
View 3 Replies
View Related
Jul 20, 2005
Hi there...I am having a whole bunch of trouble trying to design a certain query. Ihave two tables (see a representation of them here:http://www.plankmeister.org.uk/tables.html ) one called menu_data and onecalled page_data.menu_data contains a list of defined menus (menu_group) which may be sortedaccording to the menu_group_display_order column.page_data contains a list of page definitions. Each page belongs to amenu_group. All the pages in a given group may be sorted according to thepage_display_order column. (for instance, a query to order all pages with amenu_group equal to 1 in ascending order would produce:CatsDogsFishSquirrels)What I am trying to do is to design a query that will tell me thepage_user_name of all the pages that sit at the 'top' of their menu group,but ordered by the menu_group_display_order column.So basically, it will order the data in menu_data by themenu_group_display_order colum, then comparing menu_data.menu_group topage_data.menu_group, will return the 'first' row after being ordered bypage_display_order, so that in the case of the data given, the return wouldbe:HorsesCatsBirdsRabbitsI've tried UNION, GROUP BY, TOP 1, INNER JOIN, OUTER JOIN, SLIGHTLY TO THELEFT JOIN, ONLY IF ITS A WEDNESDAY JOIN... etc etc... But I just can't getit to work! It either returns 40 rows, or one. I've spent a total of about10 hours trying to design this query, and am losing what precious littlehair I have left at an alarming rate.Hope someone can provide some insight!Plankmeister.
View 3 Replies
View Related
Feb 26, 2008
I'm trying to do the following:
INSERT INTO TABLENAME (VAL1, VAL2)
SELECT 'NEW YEAR'S DAY', ...
Because of the single quotation mark in YEAR'S the insert fails. I know this has got be one helluva dumb question. but I'm still learning. How is it done??
View 5 Replies
View Related
Jan 10, 2007
Hi, I'm getting the error Syntax error (missing operator) in query expression 'dbPWork.id = dbPWorkWord.work_id LEFT JOIN words ON dbPWorkWord.word_id = words.id'." on the query below. Everything looks in place to me. Do you see anything that shouldn't work?
Query:
Code:
Code:
SELECT DISTINCT dbPWork.id, description_e as description, w_id , dateStart, dateEnd FROM dbPWork
LEFT JOIN dbPWorkW ON dbWork.id = dbPWorkW.work_id
LEFT JOIN words ON dbPWorkW.word_id = words.id
Everything works fine until I add the second LEFT JOIN statement. Any ideas? I'm stumped.
View 4 Replies
View Related
Aug 19, 2007
Hello Everyone,
I was hoping somebody could help me out with a query I've been trying to solve.
My Table Structure:
[UserMessages]
MessageID int
ToUserID int
FromUserID int
Subject varchar(200)
Message varchar(max)
isNew bit
[UserMessageReplies]
ReplyMessageID int
MessageID int
ToUserID int
FromUserID int
Message varchar(max)
isNew bit
Sample Data:
[UserMessages]
MessageID | ToUserID | FromUserID | Subject | Message | isNew
-------------------------------------------------------------------------------------------------------------
1 1 2 test subject Message Body 0
2 2 1 test subject Message Body 0
3 1 4 test subject Message Body 1
4 1 5 test subject Message Body 1
[UserMessageReplies]
ReplyMessageID | MessageID | ToUserID | FromUserID | Message | isNew
---------------------------------------------------------------------------------------------------------------------------
1 1 2 1 re: Message Body 0
2 1 1 2 re: Message Body 0
3 1 2 1 re: Message Body 0
4 1 1 2 re: Message Body 0
5 1 2 1 re: Message Body 1
6 2 1 2 re: Message Body 1
Explanation:
ReplyMessageID = 1-4 signfies that there is a thread response to MessageID 1 but they have been opened (isNew =0).
ReplyMessageID = 5 signfies that there is a new thread response to MessageID 1.
ReplyMessageID = 6 signifies that there is a reply from a message UserID=1 sent out (MessageID 2)
There needs to be a filter to check UserMessages.TOUserID=1 OR UserMessageReplies.ToUserID=1 to ensure that we can capture a msg that UserID=1 had sent out but now there is a reply to the Message by the User (in this example data i've setup MessageID = 2 to handle that possibility)
My Goal:
To select all messages for a ToUserID and order them by UserMessages.isNew or UserMessageReplies.isNew. This must include a message the user has sent but now has received a reply. (This means the first filter; UserMessages.ToUserID, must be overwritten with UserMessageReplies.ToUserID)
Thanks very much!
Chris
View 4 Replies
View Related
Nov 30, 2006
VB.NET 2005 Express and SQL Server 2005 Express - NOT saving updates to DB - SOLUTION!
-----------------------------------
The following article is bogus and confusing:
How to: Manage Local Data Files - Setting 'Copy to Output Directory' to 'Do not copy'
http://msdn2.microsoft.com/en-us/library/ms246989.aspx
You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.
Do not copy
The file is never copied or overwritten by the project system. Because your application creates a dynamic connection string that points to the database file in the output directory, this setting only works for local database files when you manually copy the file yourself.
You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.
-----------------------------------
The above article is bogus and confusing.
This is rediculous!
This is the most vague and convoluted bunch of nonsince I've ever come accross!
Getting caught out on this issue for the 10th time!
And not being able to find an exact step-by-step solution.
--------------------------
I've tried it and it doesn't work for me.
Please don't try what the article eludes to as I'm still sorting out exactly what is supposed to be happening.
If you have a step-by-step procedure that can be reproduced this properly please PM me.
I would like to test its validity then update this exact post as a solution rather than just another dicussion thread.
Many thanks.
This is the exact procedure I have come up with:
NOTE 1: DO NOT allow VB.net to copy the database into its folders/directorys.
NOTE 2: DO NOT hand copy the database to a folder/directory in your project.
Yes, I know its hard not to do it because you want your project nice and tidy.
I just simply could NOT get it to work.
You should NOT have myData.mdf listed in the Solution Explorer. Ever.
Create a folder for your data following NOTE 2.
Copy your data to that folder. * mine was C:mydatamyData.mdf
Create a NEW project.
Remove any Data Connections. ( no matter what)
Save it.
Data | View Data Sources
Add New Data Source
select NEW CONNECTION ( No Matter what, do it!
Select the database. * again mine was C:mydatamyData.mdf
Answer NO to the question:
Would you like to copy the file to your project and modify the connection?
- NO ( no matter what - ANSWER NO ! - Absolutely NO )
Then select the tables you want in the DataSet.
and Finish.
To Test ----------
From the Solution Explorer | click the table name drop down arrow | select details
Now Drag the table name onto the form.
The form is then populated with a Navigation control
and matching Labels with corresponding Textboxes for each field in the table.
Save it.
1) Run the app.
Add one database record to the database by pressing the Add(+) icon
Just add some quick junk data that you don't mind getting lost if it doesn't save.
YOU MUST CLICK THE SAVE ICON to save the data you just entered.
Now exit the application.
2) Run the app again.
And verify there is one record already there.
Now add a second database record to the database by pressing the Add (+) icon.
NOW add some quick junk data that you WILL intentionally loose.
*** DO NOT *** press the save icon.
Just Exit the app.
3) Again, Run the app.
Verify that the first record is still there.
Verify that the Second record is NOT there.
Its NOT there because you didn't save the data before exiting the app.
Proving that YOU MUST CLICK THE SAVE ICON to save the data you just entered.
Also proving you must add your own code to catch the changes
and ask the user to save the data before exitiing or moving to another record.
As a side note, since vb.net uses detached datasets,
(a copy/snapshot of the dataset in memory and NOT directly linked to the database)
the dataset will reflect all changes made when moving around the detached datasets.
YOU MUT REMEMBER TO SUBMIT YOUR CHANGES TO THE DATABASE TO SAVE THEM.
Otherwise, they will simply be discarded without notice.
Whewh!
I hope this saves me some time the next time I want to start a new database project.
Oh, and uh, for anyone else reading this post.
Thanks,
Barry G. Sumpter
Currently working with:
Visual Basic 2005 Express
SQL Server 2005 Express
Developing Windows Forms with
101 Samples for Visual Basic 2005
using the DataGridView thru code
and every development wizard I can find within vb.net
unless otherwise individually stated within a thread.
View 17 Replies
View Related
Jan 16, 2006
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple.
No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0.
It should not be returning 0 if its not updating so I can't figure out why it does.
Why does this always return 0?
[pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int
IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre]
Thanks!
View 2 Replies
View Related
Aug 10, 2006
It goes like the following:Use AdventureWorks database and HumanResources.Department table.Create a stored procedure called spDepartmentAddUpdate. This procedureaccepts two parameters: Name, and GroupName. The data types areVarChar(50), and VarChar(50) respectively. Define logic in thisprocedure to check for an existing Department record with the same Name.If the department record exists, update the GroupName and ModifiedDate.Otherwise, insert a new department record.A.Execute your stored procedure to show that the insert logic works.B.Execute your stored procedure to show that the update logic works.Any hints from the wizards out there would be greatly appreciated!*** Sent via Developersdex http://www.developersdex.com ***
View 6 Replies
View Related
May 10, 2007
I have a table with 2 columns as follows:
COORD LEVEL===== =====1 11 22 23 21 32 33 34 35 3
I need to produce a result that has 1 column that is the concatenation of each COORD separated by a '.' by increasing LEVEL
EX: The result should look like this
1.1.1
1.2.1
1.2.2
1.2.3
1.2.4
1.2.5
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
Please note that the answer must be flexible enough to handle any number of levels and coordinates (although levels will most likely be less than 5 and coordinates less than 100)
Can this be done in a simple SQL statement?
ANY help is very much appreciated.
View 7 Replies
View Related
Feb 2, 2008
Hello everyone
Here is the situation I'm trying to set-up a package to ftp some files down if that part fails email me but if successful rename the 2 files to something else.
so what I set-up was a FTP tasks with the remote path set as a expresion since I needed to Download todays files.
no problem there have that part working.
so then I set a notifaction event with failure constraint to email me. pretty easy so far.
then I set 2 tasks to rename the 2 files downloaded I'm sure I could do this part with a loop but what seperate tasks so I knew if any failed or could set-up notifaction tasks if I wanted. in the 2 rename tasks I set the sourcepath to an expression so it would know to read todays files and they could change from day to day.
then the destination part is hard coded for now to a file name.
now here is were the issue comes in I go to save it and it says the files don't exist from the rename piece. well of course not they haven't been FTPed yet.
so I tried delayevaluation on both the file system tasks but a no go still errors.
What I need it to do is basically say wait till the ftp is run these files won't be there. any help in the right direction would be appreciated.
thank in advance
Troy
View 1 Replies
View Related
May 11, 2008
Hello,
I've seem some good posts similair to this, but I haven't been able to find my exact issue.
I have the following table:
ID
Name
Location
Start
End
1
Joe
NY
2000
2001
1
Joe
CA
2002
2004
1
Joe
MA
2005
2008
2
Sue
NJ
2003
2004
2
Sue
FL
2004
2008
3
Bob
CA
1999
2000
3
Bob
WA
2001
2004
3
Bob
OR
2005
2006
3
Bob
MI
2007
2008
As you can see, the Location, Start and End dates can vary for each person and I don't know how many rows a single person might have.
The result I want, is a "pivot like" table.
ID
Name
Location1
Start1
End1
Location2
Start2
End2
Location3
Start3
End3
Location4
Start4
End4
1
Joe
NY
2000
2001
CA
2002
2004
MA
2005
2008
2
Sue
NJ
2003
2004
FL
2004
2008
3
Bob
CA
1999
2000
WA
2001
2004
OR
2005
2006
MI
2007
2008
I assume I can first do a count of the maximum rows for an individual and that is greatest number of columns I would need. But doing that and trying to figure out the rest has really stumped me.
Any thoughts, ideas and suggestions would be greatly appreciated.
Thank you.
-Gumbatman
View 11 Replies
View Related
Nov 1, 2007
Hello everyone. I'm stuck with what must be a common sql challenge.
I've got this single table that looks like this:
Store, Original Store, Product, Sale type, Method, Amount
There will be two product types (prodA and prodB)
There will be two Sale Types (New and Recharge)
There will be two Method (Cash and Credit)
The tricky part is I also need to report sales activity when a store
was the Original Store for a customer Recharge at another Store.
The report needs to look like this:
Store , Product, Cash New Total, Cash Recharge Total, Credit New
Total, Credit Recharge Total, Outside Recharge Total
Grouping/Totally on Store/Product.
In the above "Outside Recharges" means the Store was the Original store
and another store performed a recharge on it's customer.
Thanks for any help or information
View 3 Replies
View Related
Oct 7, 2006
I would like to transfer selected data from an ODBC-based table to a OLEDB-based table. However, there isn't a data flow source on the Data Flow Design screen to accomodate such an action. Please help!
View 1 Replies
View Related
Dec 3, 2003
Let say I have a table that is composed of 11 columns - one the Primary Key and the other are keys to rows in another table. Of these 10 column 2-10 are nullable. Can I get all the info in one SELECT? I can't use JOINS because columns 1-10 are keys to the same table. I am not very good at explaining these things but hopefully it makes sense.
Thanks
View 5 Replies
View Related
Oct 3, 2001
Using SQL 7 (of course), is there a way to give a user access to create and modify Stored procedures without actually giving them DBO rights?
View 1 Replies
View Related
Jan 11, 2005
Hi folks, guidance required!
Clients have an MSDE installed and they need all of their data to be dowloaded for the first time from our website. 30 tables r involved.
Can i automate this? I suspect BCP allows only one table to be exported into a text file. Since it's the first time process i don't want to setup replication.
Howdy!
View 2 Replies
View Related
Sep 27, 2007
Hello All,
I have a transaction table that holds nearly a million records and my master with 60000 records,I want to fetch details based on two dates.
I use Union operator to query the info from a view,is this right or fetch the result into a temporary table and fetch the result from temporary table using the same Union operator.
Which is the better way to fetch details faster.
Nirene
My SP is pasted below just advice me to execute this more efficiently,cos this SP is called thru a Web application.
CREATE PROCEDURE GL @SDt Varchar(10),@EDt Varchar(10),@Loccode Char(5),@OP Char(4)
AS
Declare @OpBalQry NVarchar(1000),@TrnQry NVarchar(2000),@MainSQry NVarchar(500),@MainEQry NVarchar(500)
Declare @Cocode Char(5)
Declare @CashGL Char(6),@Gldesc Varchar(50)
IF EXISTS (Select 1 FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE='BASE TABLE' AND TABLE_NAME='#Gltmp')
Begin
Drop Table #Gltmp
End
Select @Cocode=Cocode from Location Where Loccode=@Loccode
Select @CashGL=Glcode,@Gldesc=Gldesc from Glmast Where Cocode=@Cocode and Subgroupcode='CASH'
Set @OpBalQry='Select A.Glcode,'''' as Trtype,''' + @SDt + ''' as Refdt,'' Opening Balance'' as Refno,
Max(B.Gldesc) as Narration,Case When (Sum(A.Deb)-Sum(A.Cre))<0 Then (-1*(Sum(A.Deb)-Sum(A.Cre))) Else 0 End as Dr,
Case When (Sum(A.Deb)-Sum(A.Cre))>=0 Then (Sum(A.Deb)-Sum(A.Cre)) Else 0 End as Cr from
(
Select Glcode,
(Case When Drcrflag=''D'' Then Opbal Else 0 End) as Deb,
(Case When Drcrflag=''C'' Then Opbal Else 0 End) as Cre from Obdata
Union
Select Glcode,
(Case When Drcrflag=''D'' Then Tramt Else 0 End) as Deb,
(Case When Drcrflag=''C'' Then Tramt Else 0 End) as Cre from Trans_Journal
Where Refdt <Convert(Datetime,''' + @SDt + ''',103)
) A,Glmast B Where B.Cocode=''' + @Cocode + ''' and A.Glcode=B.Glcode Group By A.Glcode
Union
'
Set @TrnQry='SELECT T.Glcode,T.Trtype,Convert(Varchar,Max(T.Refdt),103) as Refdt , '''' AS Refno,
(Rtrim(Ltrim(Max(G.Gldesc))) + '' -- From Sub-Ledger'') AS Narration,
SUM(CASE WHEN T.Drcrflag = ''D'' THEN T.tramt ELSE 0 END) AS Dr,
SUM(CASE WHEN T.Drcrflag = ''C'' THEN T.tramt ELSE 0 END) AS Cr
FROM Trans_Journal T,Glmast G
WHERE T.Glcode=G.Glcode and G.Cocode=''' + @Cocode + ''' and (T.Slcode IS NOT NULL AND Len(Rtrim(Ltrim(T.Slcode)))>0) and
(T.Refdt>=Convert(Datetime,''' + @SDt + ''',103) and T.Refdt <=Convert(Datetime,''' + @EDt + ''',103)
and T.Loccode= ''' + @Loccode + ''' and (G.Subgroupcode<>''BANK'' or G.Subgroupcode<>''CASH''))
GROUP BY T.Glcode,T.Trtype
UNION
SELECT A.Glcode,'''' as Trtype,Convert(Varchar,A.Refdt,103) as Refdt, A.Refno, B.Gldesc AS Narration,
CASE WHEN A.Drcrflag = ''D'' THEN A.Tramt ELSE 0 END AS Dr,
CASE WHEN A.Drcrflag = ''C'' THEN A.Tramt ELSE 0 END AS Cr
FROM Trans_Journal, Glmast B
WHERE (A.Glcode = B.Glcode and B.Cocode=''' + @Cocode + ''') and
(A.Slcode IS NULL OR Len(Rtrim(Ltrim(A.Slcode)))=0) and
(A.Refdt>=Convert(Datetime,''' + @SDt + ''',103) and A.Refdt<=Convert(Datetime,''' + @EDt + ''',103))
and A.Loccode=''' + @Loccode + ''' and (B.Subgroupcode<>''BANK'' or B.Subgroupcode<>''CASH'')
Union
Select Glcode,Trtype,Convert(Varchar,Max(Refdt),103) as Refdt,'' '' as Refno,Max(Narration) as Narration,Sum(Dr) as Dr,Sum(Cr) as Cr from
(Select A.Glcode,A.Trtype,A.Refdt,B.Gldesc as Narration,
CASE WHEN A.Drcrflag =''D'' THEN A.Tramt ELSE 0 END AS Dr, CASE WHEN A.Drcrflag =''C'' THEN A.Tramt ELSE 0 END AS Cr
from Trans_Journal,Glmast B
WHERE
(A.Glcode=B.Glcode and B.Cocode=''' + @Cocode + ''' and A.Refdt>=Convert(Datetime,''' + @SDt + ''',103)
and A.Refdt<=Convert(Datetime,''' + @EDt + ''' ,103)
and A.Loccode=''' + @Loccode + ''') and (B.Subgroupcode=''BANK'' or B.Subgroupcode=''CASH'')
Union
Select ''' + @CashGL + ''' as Glcode,Trtype,Refdt,''' + @Gldesc + ''' as Narration,
CASE WHEN Drcrflag =''C'' THEN Tramt ELSE 0 END AS Dr, CASE WHEN Drcrflag =''D'' THEN Tramt ELSE 0 END AS Cr
from Trans_Transnarr
WHERE (Trtype=''CPM'' or Trtype=''CRT'') and Loccode=''' + @Loccode + ''' and
Refdt>=Convert(Datetime,''' + @SDt + ''' ,103) and Refdt<=Convert(Datetime,''' + @EDt + ''',103)) TT
Group By Glcode,Trtype) X'
Set @MainSQry='Select Glcode,Trtype,Refdt,Refno,Narration,Dr,Cr Into #Gltmp from ('
Declare @Fullqry NVarchar(4000)
If @OP='WOB'
Begin
Set @TrnQry = @OpBalQry+@TrnQry
End
Set @FullQry = @MainSQry+@TrnQry
Exec sp_executesql @FullQry
Select Glcode,Trtype,Refdt,Refno,Narration,Ltrim(Rtrim(Str(Dr,14,2))) as Dr,Ltrim(Rtrim(Str(Cr,14,2))) as Cr from #Gltmp SQL2XML
Where Dr+Cr<>0 Order By Glcode,Trtype,Refdt,Refno for XML AUTO
Drop Table #Gltmp
GO
View 3 Replies
View Related
Mar 28, 2008
hi,
i want to get following output:
id_order | type | number
-------------------------
1234 | A | 1
1235 |A | 0
1235 |B | 0
1236 |B | 1
1237 |C | 0
1237 |D | 0
create table tbl_order
(
id_order int
,type nvarchar(40)
)
insert into tbl_order (id_order, type) values (1234, 'A' )
insert into tbl_order (id_order, type) values (1235, 'A' )
insert into tbl_order (id_order, type) values (1235, 'B' )
insert into tbl_order (id_order, type) values (1236, 'B' )
insert into tbl_order (id_order, type) values (1237, 'C' )
insert into tbl_order (id_order, type) values (1237, 'D' )
insert into tbl_order (id_order, type) values (1238, 'A' )
insert into tbl_order (id_order, type) values (1239, 'D' )
insert into tbl_order (id_order, type) values (1239, 'B' )
insert into tbl_order (id_order, type) values (1239, 'A' )
select
id_order
,type
--,isnull(orderX,'') as number
,case when orderX > 1 then 1 else 0 end as number2
from tbl_order
left join (select t2.id_order as orderX
from tbl_order as t2
where
(select count(t1.id_order)
from tbl_order as t1
where
t1.id_order = t2.id_order) = 1
)as x
on tbl_order.id_order = x.orderX
Is there any better/faster select sentance to do this? i'm using sql2000.
thank you
View 1 Replies
View Related
Mar 3, 2008
Hi, i am not sure if i can solve the problem with SSIS. I wanted do do it hardcoded with C# or so.
So, for my project I need to download zip-files on a daily-base. In these zip-files are xml-Files. And in these files is information stored for inserting or updating tables on a MS-SQL-Server.
So, my question, is it possible to solve that with SSIS? And if, is it easy to understand and to learn within a few days?
I haven't found good sources for information on how to get the data out of XML-Files.
View 18 Replies
View Related
Jun 15, 2006
I've got a .dts which load data to several Sql2k servers by Copy SQL Server Objects Task. I'd like to add another task for a Sql25k but I can't because of it's requesting SMO.
It seems that such task need DMO. I know that there are other ways for do such stuff in that DTS but I wonder if there is any trick or shortcut for to avoid this barrier.
View 1 Replies
View Related
Dec 26, 2007
Dear All expertise please help me
The following is the table structure of Holiday
EmployeeID(Integer)
HolidayFrom(date)
HolidayTo(date)
The following record exist in the table
EmployeeId HolidayFrfom Holidayto
-----------------------------------------------------------------------------------------------
5 25/12/2007 28/12/2007
1 02/01/2008 10/01/2008
2 03/01/2008 03/01/2008
3 25/01/2008 27/01/2008
I want a report to get the employee who did take the leave from the given date range. For example I am giving the date range as follows
Criteria for Report
----------------------------------
date from 03/01/2008
Date to 04/01/2008
When I given the date range as above two record have to be displayed . Because Employee 1 and 2 will be on leave on that date.
EmployeeId HolidayFrfom Holidayto
-----------------------------------------------------------------------------------------------
1 02/01/2008 10/01/2008
2 03/01/2008 03/01/2008
So please help me to find out an SQL to display the records from the given criteria of two date range
View 2 Replies
View Related
May 25, 2007
Hi all,
I think i have a quite specific problem that we have to resolve with replication. however, i don't know which type of replication to use and how to configure it for this:
To simplify the case a bit:
We have one central server which has a table Sales(id, shopid, article).
Also our 50 shops have the same table Sales(id, shopid, article).
spec 1:
When a shop sells an article, the row of the Sales table at the local shop has to be replicated to the central server. This way, the central server its Sales table has all sold articles from all shops.
spec2:
But now we have also an internet shop. All e-orders arrive immediately in the table Sales at the Central Serve with a specific shopid where the article will arrive. Now i have to find a way to replicate the new rows from the Central Server to the specific Shop.... Remark: the other shops should not have rows of other shops.
which type of replication would i use the best and how?
Thanks !
View 6 Replies
View Related
Feb 12, 2007
The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation) (Microsoft.ReportingServices.Diagnostics)
Please: a step by step solution.
View 6 Replies
View Related
