Stupid DBNull Question
Jan 3, 2006
I haven't tested it, because at the moment I can't access my SQL database
I know this is probably a stupid question, but...
How can I test for DBNull when I'm using SqlDataReader.Item(string)?
I use to check it using: if(!reader.IsDBNull(2)) ...
But I have found that can not count on a particular ordinal reference because some of the stored procedures select the columns in different orders.
can I do something like: if(reader["Column1"] != DBNull.Value)
or with the reader["Column1"] throw an error because it is not found??
I too hate when people ask questions that they could test themselves...but I can't really test it at the moment. Any input would be greatly appreciated.
View 2 Replies
ADVERTISEMENT
May 3, 2007
As a part of migration to .net we are redesigning sql server 7 database and moving it to sql server 2005. There are a lot of fields with dbnull value in the existing db. It would be nice to populate them with some default value while transfering data to the new datbase on sql server 2005.
What is the best way to deal with the issue, are there any possible drawbacks and problems.
Your input will be greatly appreciated.
View 1 Replies
View Related
Jan 10, 2008
Hello!
Is there an easy way to deal with this situation below when reading in data from a SQL Database:
int? myNullableColumn;myNullableColumn = Convert.ToInt32(datarow["datacolumn"]);
Where, ideally, 'myNullableColumn' would be 'null' if the value was 'DBNull.Value'. This does not work because Convert.ToInt32 will not convert 'DBNull.Value to null', but instead throws an error.
Is there a built in funtion that does do this?
Thanks!
View 8 Replies
View Related
Jan 26, 2004
Hello,
If I have a database table with column that can accept null values and I want to insert a null value into that column, what is the correct syntax?
db_cmd = New SqlCommand( "sp_stored_procedure", db_connection )
db_cmd.CommandType = CommandType.StoredProcedure
db_cmd.Parameters.Add( "@col_to_set_to_null", ??? )
ie: what expression can be used for "???"
Ideally, I want to check if a string value is empty and if so insert a null, but I have yet to see any examples, ie:
if ( str.empty ) then
insert DBNull.value into column
else
insert str into column
end if
Sincerely,
Brent D.
View 1 Replies
View Related
Apr 2, 2007
Am getting errors on this syntax:
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Row.myColumn = DBNull.Value
Value of type 'System.DBNull' cannot be converted to type 'String'
Any ideas? Just want to set the myColumn to NULL.
Thanks
View 1 Replies
View Related
Mar 11, 2004
Hi
I have only been coding in .Net for about six months, and am not sure if this is a C# problem or an SQL one. I use the Data Access Application Block in my program.
I have two optional fields on my form (RangeFrom and RangeTo). If the user chooses not to enter data into these textboxes(textbox = ""), an entry on the db is created with null values. It works.
But sometimes the user wants to enter 0 as either an upper or lower end of a range. This is where my problem comes in. My program saves 0 as null too.
In my program I do a test on the textboxes and populate two float values in a business object (objQuestion) accordingly, like this:
if (txtrangefrom.Text != "") {
objQuestion.RangeFrom=float.Parse(txtrangefrom.Text);
objQuestion.RangeTo=float.Parse(txtrangeto.Text);
}
else {
objQuestion.RangeFrom=Convert.ToSingle(null);
objQuestion.RangeTo=Convert.ToSingle(null);
}
And this is what my Business object look like. It sets up the parameters and calls the Data Access Application Block to create an entry in my table:
// fieldslist
float cvintRangeFrom;
float cvintRangeTo;
//properties
public float RangeFrom {
get {
return cvintRangeFrom;
}
set {
cvintRangeFrom = value;
}
}
public float RangeTo {
get {
return cvintRangeTo;
}
set {
cvintRangeTo = value;
}
}
// some code deleted for readability....
public int AddOption() {
string cvstrSpName = "addOption";
SqlParameter [] cvstrStoredParams = SqlHelperParameterCache.GetSpParameterSet(gcstrConnectionString, cvstrSpName, true);
//lines deleted for readability...
//check if the optional fields have a value associated with them. if not, assign dbnull.value.
cvstrStoredParams[4].Value=(cvintRangeFrom != Convert.ToSingle(null) ? cvintRangeFrom : (object)DBNull.Value);
cvstrStoredParams[5].Value=(cvintRangeTo != Convert.ToSingle(null) ? cvintRangeTo : (object)DBNull.Value);
//lines deleted for readability...
SqlHelper.ExecuteNonQuery(gcstrConnectionString, CommandType.StoredProcedure, cvstrSpName, cvstrStoredParams);
return(cvintOptionID = Convert.ToInt32(cvstrStoredParams[0].Value));
}
I use Convert.ToSingle when working with nulls (or possible nulls) because I get an error when I use float.parse for this.
The thing is, after this method AddOption has been executed, I test the value if the business object's rangefrom (that is where I entered 0) and display it on my form. I still shows a 0, but on my database table it is null!
objQuestion.AddOption();
//txtrangefrom.Text=""; on the next line I test the value in the business object...
txtrangefrom.Text=objQuestion.RangeFrom.ToString(); // and this displays 0!!!
//txtrangeto.Text="";
txtrangeto.Text=objQuestion.RangeTo.ToString();
So to me it seems the problem seems to be either the DAAB or on the SQL side, but hopefully somebody can prove me wrong! I was thinking that it could also be float.parse/Convert.ToSingle methods and have done various tests, but I am none the wiser...
Any help or ideas will be greatly appreciated...
View 2 Replies
View Related
Feb 5, 2006
Hi!
I was trying to use the ?? operator with an DBDatareader. eg:
long lValue = Convert.ToInt32(objReader["ParentID"] ?? -1);
which throws the following exception: "... Object cannot be cast from DBNull to other types."I think the reason is, that DBNull.Value isn´t actually null. Therefore I changed my code to:
long lValue = objReader["ParentID"] != DBNull.Value ? Convert.ToInt32(objReader["ParentID"]) : -1;
Is there a better way of doing this ? Can one use the ?? operator with a Datareader anyway?
Thanks for your help!
PS: sorry for my poor english.
View 2 Replies
View Related
Apr 24, 2006
Hi,
I have built a few pages and a stored procedure and a class on the back of a SQL2000 dbase. and I get the following error:
Cast from type 'DBNull' to type 'String' is not valid.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Cast from type 'DBNull' to type 'String' is not valid.Source Error:
Line 111: Dim myWorkJobs As WorkJobsDATA = New WorkJobsDATA
Line 112:
Line 113: myWorkJobs.CustomerID = CStr(parameterCustomerID.Value)
Line 114: myWorkJobs.WorkID = CStr(parameterWorkID.Value)
Line 115: myWorkJobs.DateOfQuote = CStr(parameterDateOfQuote.Value).Trim()
Source File: C:InetpubwwwrootCommerceComponentsWorkJobs.vb Line: 113
My Database has 1 line of data (for testing) and all fields are populated. I am Querying a column called IndividualID which has a value of 3425243 at the moment. This is hardcoded in the aspx.vb at the moment.
ASPX VB:
Public Class WorkRequest Inherits System.Web.UI.Page
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here End Sub
Private Sub btnEnter_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnEnter.Click
'for now, send this value (stored in dbase under individualID) to the querystring
Dim IndividualID As String = "3425243"
Response.Redirect("WorkRequestMain.aspx?IndividualID=" & IndividualID) End SubEnd Class
COMPONENTSWorkJobs.vb (This is the class file)
Imports SystemImports System.ConfigurationImports System.DataImports System.Data.SqlClient
Namespace ASPNET.StarterKit.Commerce
Public Class WorkJobsDATA
Public CustomerID As String Public WorkID As String Public DateOfQuote As String Public QuoteAmount As String Public Title As Decimal Public FirstName As String Public Surname As String Public FirstLine As String Public District As String Public Town As String Public Postcode As String Public Telephone As String Public Requirements As String Public WorkRequired As String Public EmailAddress As String
End Class
Public Class WorkJobs
Public Function GetWorkDetails(ByVal IndividualID As String) As WorkJobsDATA
Dim myConnection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString")) Dim myCommand As SqlCommand = New SqlCommand("SP_PendingQuotes", myConnection)
' Mark the Command as a SPROC myCommand.CommandType = CommandType.StoredProcedure
' Add Parameters to SPROC Dim parameterIndividualID As SqlParameter = New SqlParameter("@IndividualID", SqlDbType.NVarChar, 50) parameterIndividualID.Value = IndividualID myCommand.Parameters.Add(parameterIndividualID)
Dim parameterCustomerID As SqlParameter = New SqlParameter("@CustomerID", SqlDbType.BigInt, 8) parameterCustomerID.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterCustomerID)
Dim parameterWorkID As SqlParameter = New SqlParameter("@WorkID", SqlDbType.NVarChar, 50) parameterWorkID.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterWorkID)
Dim parameterDateOfQuote As SqlParameter = New SqlParameter("@DateOfQuote", SqlDbType.DateTime, 8) parameterDateOfQuote.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterDateOfQuote)
Dim parameterQuoteAmount As SqlParameter = New SqlParameter("@QuoteAmount", SqlDbType.Money, 8) parameterQuoteAmount.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterQuoteAmount)
Dim parameterTitle As SqlParameter = New SqlParameter("@Title", SqlDbType.NVarChar, 50) parameterTitle.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterTitle)
Dim parameterFirstName As SqlParameter = New SqlParameter("@FirstName", SqlDbType.NVarChar, 50) parameterFirstName.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterFirstName)
Dim parameterSurname As SqlParameter = New SqlParameter("@Surname", SqlDbType.NVarChar, 50) parameterSurname.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterSurname)
Dim parameterFirstLine As SqlParameter = New SqlParameter("@FirstLine ", SqlDbType.NVarChar, 50) parameterFirstLine.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterFirstLine)
Dim parameterDistrict As SqlParameter = New SqlParameter("@District", SqlDbType.NVarChar, 50) parameterDistrict.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterDistrict)
Dim parameterTown As SqlParameter = New SqlParameter("@Town", SqlDbType.NVarChar, 50) parameterTown.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterTown)
Dim parameterPostcode As SqlParameter = New SqlParameter("@Postcode", SqlDbType.NVarChar, 50) parameterPostcode.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterPostcode)
Dim parameterTelephone As SqlParameter = New SqlParameter("@Telephone", SqlDbType.NVarChar, 50) parameterTelephone.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterTelephone)
Dim parameterRequirements As SqlParameter = New SqlParameter("@Requirements", SqlDbType.NVarChar, 3500) parameterRequirements.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterRequirements)
Dim parameterWorkRequired As SqlParameter = New SqlParameter("@WorkRequired", SqlDbType.NVarChar, 3500) parameterWorkRequired.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterWorkRequired)
Dim parameterEmailAddress As SqlParameter = New SqlParameter("@EmailAddress", SqlDbType.NVarChar, 100) parameterEmailAddress.Direction = ParameterDirection.Output myCommand.Parameters.Add(parameterEmailAddress)
myConnection.Open() myCommand.ExecuteNonQuery() myConnection.Close()
parameterEmailAddress.Value.GetType()
Dim myWorkJobs As WorkJobsDATA = New WorkJobsDATA
myWorkJobs.CustomerID = CStr(parameterCustomerID.Value) myWorkJobs.WorkID = CStr(parameterWorkID.Value) myWorkJobs.DateOfQuote = CStr(parameterDateOfQuote.Value).Trim() myWorkJobs.Title = CStr(parameterTitle.Value).Trim() myWorkJobs.FirstName = CStr(parameterFirstName.Value).Trim() myWorkJobs.Surname = CStr(parameterSurname.Value).Trim() myWorkJobs.FirstLine = CStr(parameterFirstLine.Value).Trim() myWorkJobs.District = CStr(parameterDistrict.Value).Trim() myWorkJobs.Town = CStr(parameterTown.Value).Trim() myWorkJobs.Postcode = CStr(parameterPostcode.Value).Trim() myWorkJobs.Telephone = CStr(parameterTelephone.Value).Trim() myWorkJobs.Requirements = CStr(parameterRequirements.Value).Trim() myWorkJobs.WorkRequired = CStr(parameterWorkRequired.Value).Trim() myWorkJobs.EmailAddress = CStr(parameterEmailAddress.Value).Trim()
Return myWorkJobs
End Function
End ClassEnd Namespace
And finally my stored procedure:
CREATE Procedure SP_PendingQuotes( @IndividualID nvarchar, @CustomerID bigint OUTPUT, @WorkID nvarchar(50) OUTPUT, @DateOfQuote datetime OUTPUT, @QuoteAmount money OUTPUT, @Title nvarchar(50) OUTPUT, @FirstName nvarchar(50) OUTPUT, @Surname nvarchar(50) OUTPUT, @FirstLine nvarchar(50) OUTPUT, @District nvarchar(50) OUTPUT, @Town nvarchar(50) OUTPUT, @Postcode nvarchar(50) OUTPUT, @Telephone nvarchar(50) OUTPUT, @Requirements nvarchar(3500) OUTPUT, @WorkRequired nvarchar(3500) OUTPUT, @EmailAddress nvarchar(100) OUTPUT)AS
SELECT @IndividualID = IndividualID, @CustomerID = CustomerID, @WorkID = WorkID, @DateOfQuote = DateOfQuote, @QuoteAmount = QuoteAmount, @Title = Title, @FirstName = FirstName, @Surname = Surname, @FirstLine = FirstLine, @District = District, @Town = Town, @Postcode = Postcode, @Telephone = Telephone, @Requirements = Requirements, @WorkRequired = WorkRequired, @EmailAddress = EmailAddress
FROM PendingQuotes
WHERE IndividualID = @IndividualIDGO
Any ideas anyone?
I appreciate this is a big amount of data, but if anyone wants to chat to me i'm available on MSN Messenger under wolvokid@msn.com
View 2 Replies
View Related
Jul 20, 2005
Dear GroupI'm having a very weird problem. Any hints are greatly appreciated.I'm returning two values from a MS SQL Server 2000 stored procedure to myASP.NET Webapplication and store them in sessions.Like This:prm4 = cmd1.CreateParameterWith prm4..ParameterName = "@Sec_ProgUser_Gen"..SqlDbType = SqlDbType.VarChar..Size = 10..Direction = ParameterDirection.OutputEnd Withprm5 = cmd1.CreateParameterWith prm5..ParameterName = "@Sec_ProgUser_Key"..SqlDbType = SqlDbType.VarChar..Size = 10..Direction = ParameterDirection.OutputEnd With....cmd1.ExecuteNonQuery()....Session("Sec_ProgUser_Gen") = prm4.ValueSession("Sec_ProgUser_Key") = prm5.ValueBoth output parameters are declared as varchar(10) within the storedprocedure. If I run the stored procedure in SQL Analyzer, I'm getting astring value for each of them. E.g. @Sec_ProgUser_Gen is "1110011",@Sec_ProgUser_Key = "1100".Now the strange thing happens if I try to run the following code:Sub MyTest()Dim MyString1 As StringDim MyString2 As StringMyString1 = CStr(Session("Sec_ProgUser_Key"))....MyString2 = CStr(Session("Sec_ProgUser_Gen"))End SubIt fails in line 'MyString2 = CStr(Session("Sec_ProgUser_Gen"))' with Castfrom type 'DBNull' to type 'String' is not valid.I don't understand this. They are both the same, the only difference is thelength of the string. Help!Additional Information:The values for @Sec_ProgUser_XXX are created in the stored procedure with astatement like this:SET @Sec_ProgUser_Key = (SELECT Convert(varchar(1),Key_CanCreateKey) +Convert(varchar(1),Key_CanCreateTransaction) +Convert(varchar(1),Key_CanView) + Convert(varchar(1),Key_CanDelete) FROMi2b_proguser_securityprofile WHERE SecurityProfileID = @SecurityProfileID)The datatype of the source columns used to be bit then changed them toInteger as I thought this might cause the problem. (Although it shouldn't asthe values get converted to varchar without a problem in the storedprocedure. No fields contain NULL values, only 1 or 0.
View 1 Replies
View Related
Jun 2, 2007
Hello,
VS 2005
I am developing the database application. This is a live database and is being used by the customer. I am to release a new version and I had to add new columns to fit the requirements DateStarted (DateTime), and TotalHours(Int) into a database table.There are already over a 1000 rows in this table.
When the customer wants to look at a record in this table and insert the value into the text boxes (Front-end), when it gets to the DateStarted or TotalHours it comes up with a error message:"
The value for column 'DateStarted' in table 'IncidentTask' is DBNull."The method for inserting is:
Code Snippet
Me.dtDateStarted.Value = Me.DsIncidentsControl.IncidentTask(0).DateStarted
What are the possible solutions to this problem? Would it mean checking for a DBNULL before displaying in the textboxes? Or updating the new column rows with an date:
Code Snippet
UPDATE IncidentTask SET DateStarted = '1/1/2005' WHERE (DateStarted IS NULL)
Many thanks for any suggestions,
Steve
View 1 Replies
View Related
May 23, 2006
How to set NULL values inside VB Script .Net?? Both causes error:
.FECHAAP = NULL
.FECHAAP = System.DBNull
View 3 Replies
View Related
Aug 21, 2007
Hi,I have a ShoppingCart class with a lot of properties (due to structure of a legacy Orders table). I have a ShoppingCart table also which contains a lot of the same fields as my orders table.There are a lot of fields (mostly ints) which have been initalised to 0
in my ShoppingCart class and then inserted into the ShoppingCart table
when users add items to the cart. These fields are then inserted into the orders table upon check out. When i attempt to place a new record in the orders table from the ShoppingCart table, I am receiving a bunch of Foregin Key constraint errors due to all the int fields containing 0's.What i would like to do is initalise all the properites of my ShoppingCart object to DBNull.Value but of course I can't convert type 'System.DBNull' to 'int' and i can't set to 'null' either as int's are value types.I also tried:private Int32 _fieldname = Convert.ToInt32(DBNull.Value);This compiled but gave InvalidCastException runtime error.So the only option that i can think of is, as i build the parameter array to be sent to my stored procedure, test the value of each parameter, if it is 0 (or an empty string) then don't pass the actual field value but pass DBNull.Value instead.I REALLY don't want to do this as there are around 60 parameters being passed to this procedure and this will be time consuming and messy.Any suggestions would be most appreciated!ps If i could avoid having 60 parameters being passed I would...trust me!
View 2 Replies
View Related
Jan 22, 2008
Hi,I have a stored procedure which returns an integer indicating whether the operation has succeeded or failed. It does this by calling set @returnvalue = (0 or 1) then select @returnvalue as returnvalue in the stored procedure code. When I run the stored procedure, inputting a set of parameters as it expects, it does what it's supposed to do and outputs a table with a single row and a single column, called returnvalue, which has a value of either 1 or 0. When I run the stored procedure through a function in asp, using the exact same set of parameters, output the results as a data set and try and convert the return as an integer I get the following error: "Object Cannot be cast from DBNull from other types"The conversion code is ..return Convert.ToInt32(ds.Tables[0].Rows[0]["returnvalue"]);And if I change "returnvalue" to anything else (like "wibble" for example) then I get a different error telling me it can't find the column named "wibble". So the dataset definitely contains a table with a column in it called returnvalue, as you expect. But it's value is, apparently, DBNull instead of an integer.How come this works when called directly through SQL and fails when called through ASP? Can anyone help? This is really doing my head in!Cheers,Matt
View 2 Replies
View Related
Mar 31, 2008
Ok well i have a stored procedure that returns an integer between 1 and 5. My problem now is i want to check to see if the table will return NULL and if so i don't want to assign the value to my variable otherwise it'll trow an error. My code is listed below but i keep getting the error "Conversion from type 'DBNull' to type 'Integer' is not valid." i've also tried If getoptionpicked.Parameters("@optionpicked").Value = Nothing ThenIf getoptionpicked.Parameters("@optionpicked").Value Is system.dbnull Then below is the rest of the code If getoptionpicked.Parameters("@optionpicked").Value Is Nothing Then Else optionpicked = getoptionpicked.Parameters("@optionpicked").Value If optionpicked = 1 Then option1.Checked = True ElseIf optionpicked = 2 Then option2.Checked = True ElseIf optionpicked = 3 Then option3.Checked = True ElseIf optionpicked = 4 Then option4.Checked = True ElseIf optionpicked = 5 Then option5.Checked = True Else End If End If
View 1 Replies
View Related
Oct 20, 2015
I want restore database in my disk , but i cant . I've click and add from device. this is the screen. And when i click content , it show me this text : Object cannot be cast from DBNull to other types. (mscorlib) .
View 2 Replies
View Related
Feb 21, 2008
I have quite a few tables which allow NULL values. I have to struggle a lot with DBnull Exceptions :|example: col1,col2,... are all columns of type Integer and possibly NULL. var query = from person in table select new { person.col1, test = (int?) person.col2, person.col3, person.col4, ...}; As soon as my result encounters a DBNull value.. the whole query fails. This is really bad.How would I return the valid values.. and set the keys where there is no value to a null type? (e.g. int -> 0)I tried using "(int?)" but I'm not *really* sure what it does :-) Anyway.. it has no effect :-)
View 1 Replies
View Related
Apr 24, 2007
I'm creating an ISP for extractig data from a text file and put it in a database.
One of the fields in my textfile contains the value '0' or a date. If it's '0' it should be converted to the Null Value. The column in which it has to be saved is of type smalldatetime.
This is the code of my script where I want to check the value of the field in my textfile and convert it to a date or to Null.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
If Row.cdDateIn = "" Or Row.cdDateIn= "0" Then
Row.cdDateInCorr = CDate(DBNull.Value)
ElseIf Row.cdDateIn_IsNull Then
Row.cdDateInCorr = CDate(DBNull.Value)
Else
Row.cdDateInCorr = CDate(Row.cdDateIn)
End If
End Sub
The error that I get is:
Validation error. Extract FinCD: Conversion of cdDateIn [753]: Eroor 30311: Value of type 'System.DBNull' cannot ben converted to 'Date'.
How do I resolve this problem ?
View 8 Replies
View Related
Oct 12, 2001
OK, I did something stupid and now cannot get access to my server...
I was experimenting with the security/login settings and denied access to BUILTINAdministrators. Now I cannot get on my server.
Anyone else ever done this? What can I do to get back on without loosing some of my data?
Any help would be appreciated.
Thanks!
View 1 Replies
View Related
Aug 15, 2006
Still in the world of SAMS Teach Yourself SQL in 24 Hours with SQL 2000. The book says:
CREATE TABLE EMPLOYEE_TBL
(
EMP_IDVARCHAR(9)NOT NULL,
LAST_NAMEVARCHAR(15)NOT NULL,
FIRST_NAMEVARCHAR(15)NOT NULL,
MIDDLE_NAMEVARCHAR(15)NOT NULL,
ADDRESSVARCHAR(30)NOT NULL,
CITYVARCHAR(15)NOT NULL,
STATECHAR(2)NOT NULL,
ZIPINTEGER(5)NOT NULL,
PHONECHAR(10),
PAGERCHAR(10),
CONSTRAINT EMP_PK PRIMARY KEY (EMP_ID)
);
Query Analyser says:
Server: Msg 2716, Level 16, State 1, Line 3
Column or parameter #8: Cannot specify a column width on data type int.
If I take the (5) off the end of the INTEGER data type it runs through but how come you can't specify the width of an integer column?
Ta muchly.
View 6 Replies
View Related
May 7, 2001
I have a table that has three fields:
CATEGORIES
----------
catID
description
parentCatID
Some categories have sub-categories. Therefore, some entries will have null
for parentID while others will point to another category.
I need to select all of the categories, but have them returned in the
correct parent/child order (parents BEFORE children). I can't seem to get this to work correctly. Is this not possible or am I just being stupid?? :)
Thanks for any assistance.
Mike V.
View 5 Replies
View Related
Sep 10, 2004
Just a simple one I think?!!!!!
Is there any way of copying a DTS from one server to another?
I just need to play with this DTS on our test server but can't copy the thing!!!
Thanx!!!!
View 2 Replies
View Related
Oct 25, 2004
is there a way to format data on the tables. Such as Social security numbers 00/00/0000 or formating of dates 99/99/0000;0;_
is there a way of doing that on a sql table maybe??
View 3 Replies
View Related
May 12, 2004
What is the "Microsoft SQL Server 2000 Resource Kit"
I was persuming it was a programme or patch for SQL server, however it's lookign more and more like a book.
Could some please clarify and if it is a programme/patch how can I get hold of it?
View 5 Replies
View Related
Apr 13, 2008
I have two tables:
1) Table that holds all available ports.
2) Table that holds users for each port.
There may be times where one user is getting more than one port at a time.
I've built up an ASP .NET page that will display each user its port/s in one table.
On another table I want to display all the other available ports which the user doesn't posses and can buy to own.
My problem is where I try to build up the query. I just can't get all the other ports in normal display.
For example, this is what I need:
Ports table:
1/1
1/2
1/3
1/4
Users table:
User A , 1/1
User A , 1/2
ASP page display:
------------
User A Holds:
1/1
1/2
------------
Available:
1/3
1/4
------------
Of course the Available option is derived from the User Holds query, and just getting the opposit not equal ports, but I just can't get it !
I've tried all kinds of Joins and nesting SELECT queries with no luck.
I hate SQL. I want to die.
View 4 Replies
View Related
Nov 24, 2005
Afternoon everybody...
Here is my noob question of the day, is there a query I can run to display the STRUCTURE of a table? fieldnames, datatypes, sizes etc?
Select * from users where clue > 0
View 4 Replies
View Related
Apr 5, 2006
here is my problem.
i have a table that looks like this
barcode |movetype | qty
as3 | T | 4
as3 | R | 2
as3 | T | 1
here is my problem and i am probably just stupid. i need the total amount Transfered minus the Received per barcode. so here i would need to see a total of 3.
i don't know how to do this.
View 4 Replies
View Related
Aug 23, 2007
I've getting the error message at the time ntbackup starts the backup of the server:
Event Type: Error
Event Source: SQLWRITER
Event Category: None
Event ID: 24579
Date: 22-Aug-07
Time: 20:00:26
User: N/A
Computer: DBS
Description:
Sqllib error: Database DYNAMICS of SQL server instance XXX is stored on multiple volumes, only some of which are being shadowed.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 51 4c 53 4e 41 50 43 SQLSNAPC
0008: 33 36 31 00 00 00 00 00 361.....
0010: 53 51 4c 53 4e 41 50 43 SQLSNAPC
0018: 32 34 36 00 00 00 00 00 246.....
Where is the problem?
How to fix this?
Does this mean that I would not be able to restore server in the case of failure?
SQL - version SQL Server 9.0.3054 (2005 SP2)
OS - 5.2.3790 (W2k3 R2 SP2)
MS Dynamics GP 9 is installed on this platform.
Any ideas?
Thanks in advance.
View 7 Replies
View Related
Mar 7, 2007
I am trying to insert form data...three form sections into three different tables....i can insert into one table just fine....is this not possible ...or what? If so can someone please send me a small sample... thank you ...by the way i am using visual studio...vb asp.net 2.0 with ajax. Thanks in advance!
View 6 Replies
View Related
Jun 8, 2000
I'm trying to backup a database onto a different server
within the same SQL Server Group, but the Enterprise
Manager only offers the drives on the local server as
destination options. Do I have something configured
incorrectly or is there a way to do this manually?
Thanks in advance.
Doug
View 2 Replies
View Related
Mar 10, 2001
Ok, I'm trying to understand how the db user corelates to the SqL login. Can one db user have multiple logins attached to it (like dbo with sa and nt admins).
This is in reference to the issue of broken chains of ownership problems that pop up from multiple users creating tables in a single database. I would like to be able to make all the developers be the dbo user of a given database without making them a sysadmin of the entire server. Is this possible?
If not, is there a sp that fixes a db so that all ownership reverts to dbo?
Thanks in advance
fUngUs
View 2 Replies
View Related
Oct 27, 2003
What does "WHERE 1=1" do?
View 2 Replies
View Related
Mar 29, 2006
I have a little query in access ..now i must write it in T-Sql
the original...
(MSG.IDLINGUA = IIF( EXISTS
(SELECT * FROM ESMESSAGGI AS MSG WHERE MSG.IDLINGUA = [@idLingua] AND MSG.IDMESSAGGIO = BITS.IDDESCR),
[@idLingua], LDEF.IDLINGUA))
I can't be able to assign a select value at my field... IDLINGUA to perform another select..
Of course I have used the "select case when exists"
Anyone could be help me ?
View 2 Replies
View Related
