I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance
How can I pass a parameter used for the DataSet query? I'm using this DataSet file as data source of my .rdlc report for Windows Forms.
I've already done a .rdlc report to Web Forms where I passed the query parameter by ObjectDataSource.SelectParameters, but in Windows Forms this object was not created. I just hava the following created objects:
I am using this custom data extension from BI Studio.
Que1: I want to create report parameters from BI studio and capture them in my Data Extension.
Que2: Every report parameter has so many properties, like hidden, internal, default value etc, how do capture that information in my data extension, the parameters only give me name and value.
Que3: I know I can capture command Text. So My command can be Select * From tablename where fieldname= @myFieldname. Once I get this commandText in my data extension, How do extract parameters of the command?
Que4: If I have any custom attributes in my RDL file, Can I capture them in my Data Extension ?
I am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally. So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Hi, I've read some threads in regards to passing report parameters through the 'URL' but I am struggling to fully understand. To keep things simple I have 1 report parameter, named par_pub which brings back either ww06 or ww07. What I require is to click on a hyperlink and it directs me to my report and then populates the par_pub paramerter with ww07.
The part in bold is the location + name of the report and the later is where I am trying to pass the parameter. Can anyone please help as this is not working.
Hi Recently we upgraded to SQL 2005 SP2 from SQL 2005. However a problem I am noticing is on Windows 2000 machines, the report name doesn't automatically pass the save as dialog box. Anybody else get this problem or know how to fix it?
The default value in the save as dialog box is Reserved.ReportViewerWebControl. Also when I click export and I'm given the option to open/save the file, the file name is Reserved.ReportViewerWebControl.axd
I have a problem getting the URL string right to pass parameters from one report to another
This is the URL string I have set in the Navigation property of my text box: "http://SQL/Reportserver$SQL2005/Pages/Report.aspx?%2fEarlyWarning2%2fratio+reports+-+test%2freport_upper_lower_benchmark_ratio1&rs:Command=Render&rcarameters=false &company="&Parameters!company.Value.ToString()&Parameters!year.Value.ToString()&Fields!ratioName.Value.ToString()
The first thing is that when I just want to view the report say, with parameters hidden, I get this URL http://reportserver/?%2fEarlyWarning2%2fratio+reports+-+test%2freport_upper_lower_benchmark_ratio1&rs%3aCommand=Render&rc%3aParameters=false
with the message "Internet Explorer cannot display the webpage"
Why does the first part of the URL change?
If I run it with just one parameter, company, I get the same error message with this URL : http://reportserver/?%2fcompany.Value.ToString()&rs%3aCommand=Render&rc%3aParameters=false&company=%22
It looks like no value for the company parameter being passed
Hi, I have created a report in VS 2003 using command type as Text for a stored procedure. The stored procedure itself takes in 2 parameters. I have passed one of them in the exec statement but the other parameter is the one which I want to pass to the stored procedure through report. So, in short, I have got this statement in dataset
EXEC SP1 1
Which means only 1 of the arguments is being passed to the stored procedure and not the second one. I would appreciate if some one can guide me on how to pass a report parameter to the stored procedure which using command type text
Hi. I've got a report I'm designing for the web using a ReportViewer control and an RDLC report file. Here's what needs to happen in the report,
The main report calls one stored procedure with some user provided parameters, which returns a dataset. A sub-report will use 2 of the columns returned from the dataset above to call another stored procedure, which then provides the dataset used for the ReportViewer control. I'm lost in trying to implement this. How do I call the first stored procedure to get the data? Then how do I pass the returned columns to the sub-report?
The main report will have a number of these sub-reports, each on its own page. I'm just trying to implement the first sub-report. Is there an easier way to implement this without using sub-reports? Thanks.
When I click the link I am taken to the report but it is waiting for me to enter a parameter. I can see the parameter in the url address and it looks correct. I also tried Parameter!Cust.value (which has the same value as Fields!Cust.Value) but get the same result.
The target report has the correct name parameter: Cust. In any case, when I use "Jump to report" instead, it works correctly - although I don't see the parameter value in the url.
I'm currently trying to create a report that will take three parameters in the URL to generate a report: year, month, and day. The report is using an analysis services data source in RS 2005. Now, my problem is that the parameters being passed in the URL are not being selected in the drop down boxes for the parameters. The report does not throw any exceptions, and after the user selects values for the year, month, and day everything generates successfully.
Here is the URL format I am trying: http://localhost/ReportServer?/FolderName/ReportName&rs:Command=render&Year=2006&Month=6&Day=9
Currently, my parameters are all set to null for default values. They are also not multivalued, not internal, not hidden, don't allow blank, and don't allow null. I have also looked through the valid values in the drop down box for each parameter and verified that the values I supplied in the URL do exist. Also, the data types for each parameter is Integer just like the data type found in the database.
In my opinion, this problem seems directly related to using an analysis services data source. After I was getting this problem, I created a sample report using SQL Server data source, used the same three parameters, and passed them in the URL. Everything on that report worked perfectly.
Please help, I've looked thorugh almost every piece of documentation regarding parameters for Reporting Services and still no luck. Thanks!!
Where horseid id my parameter which is needed by report to generate the required data.
This query paramter value is picked from the text box on my jsp page.
But my problem is when i go to this url it says the message
"The 'HorseID' parameter is missing a value ".
In my report i have disabled the prompt user option , enable the Hide paramter option and has given no default value for this parameter.
I have done a lot of search on this topic. Everybody says that we can pass the values from the url like i am using. But still its not working. This forum is my last hope. Any body has any idea please give me some idea.
HI everyone; i have a problem , is there a possible to pass a dataset to a ssrs report programmatically ? or at runtime without specifying it at design time ...
I have an ASP.Net page that needs to sometimes pass a null parameter value to the querystring. It bombes out with an error that a date cannot be "" and that i need to supply the date.
Has any1 been able to get this right? How does one pass a null date through the querystring?
I am familure with having a report run based on users inputting variables via DDL or multiselect using SRS. But now want to access my reports a little differently. I have an ASPX page and I want a user to click a button and to have the report use the Session Variable that is stored in ASP. As a result the report will be prefiltered on data the specific user can see.
" The path of the item '/UpdatedByClickTest/S,Parameters!p1.Value, "' is not valid. The full path must be less than 260 characters long, must start with slash; other restrictions apply. Check the documentation for complete set of restrictions. (rsInvalidItemPath)"
I am developing a report against OLAP. I have a main report and a sub report. The parameters to both are exactly the same. I am passing parameters to sub report from main. Whenever I use Field!Fieldname.Value as a parameter value to the sub report, I get an error saying one or more parameters required to run the report have not been specified. I used the UniqueName, but that doesnt do my grouping right ( I dont think this works for multi-value report)
I am lost...I need to figure this out ASAP. Does somebody know an article or do you know as how to deal with OLAP reports as sub reports and passing parameters as multi-value? I tried to attach the code, but I ran out of maximum characters...
In the above code, the XML parser does not understand the Parameters element. I've also tried ReportParameters as the name of the element. I don't seem to understand why, because in the SQL data tab, Parameters is a subelement of DataSet. Why am I getting this error and how do I programmatically specify that I want a report created on the fly to have parameters?
Deserialization failed: The element 'DataSet' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition' has invalid child element 'Parameters' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition'. List of possible elements expected: 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:Fields http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:Query http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:CaseSensitivity http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:Collation http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:AccentSensitivity http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:KanatypeSensitivity http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:WidthSensitivity http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:Filters ##other:*'. Line 21, position 8.
Hi all. Is it possible to pass parameter FROM Report to my windows application(C#) ? Report is made in Business Intelligence Project. I just want to retrieve the total row number to my windows appication. Is it possible? If yes, Can you provide codes for this? Thanks. Your help would be highly appreciated.
Is it possible to pass multiple values for a report parameter through a url? For example I am using multi-select list in my asp.net page, when I click a button I want to pass the values selected in that list and generate the report on report server with the multi-select list populated with exactly the same values as in asp.net page. So there are essentially two questions: First, how to pass multiple values, second how to populate multi-select in report with these values.
I am trying to create a drill-down report by passing the Customer ID number to the drill report. The 'parent' report is a tabular report, as is the 'child.' As long as I used the numeric Customer ID, the child report returned no rows from the passed parameter. However, when I use the Customer Name instead, the child report functions correctly.
Here is the parameter as passed using the Customer ID: [Customer Hierarchy].[Customer ID].&[70011231]
Can anyone shed some light on why this wouldn't work?
I have a string report parameter called @name. In my script, i have and a.name like '%@name%' but it returns no rows. I tried removing the '% but still doesn't work. What is the correct way to script this?
I have many MS Access reports that process recordsets obtained from a MySQL database, based on a user-selected date range. This uses VBA and input boxes. I'm now creating .aspx pages to get the user input via the web, and am successful in creating a DataSet. My .aspx.vb code includes using Automation to open the Access report in Snapshot Viewer (DoCmd.OutputTo). How do I pass the DataSet to MS Access to replace using recordsets?
My VBA code in Access used to be this:
Code Snippet
Dim ws As Workspace Dim strConnection As String Dim dbs As Database
Set dbs = ws.OpenDatabase("", True, True, strConnection)
Set rst_chg = dbs.OpenRecordset("SELECT ...")
'process the recordset ...
I'm thinking I should be able to eliminate most of this code and Set rst_chg = DataSet. I've been successful with using WriteXml in the .aspx.vb page and Application.ImportXML in my VBA to pass the data using XML, but this writes to the hard drive, and also creates a database in Access (overhead I would rather not have to deal with). Again, is there a way to open the DataSet directly in my VBA code?
Hi, I have found this question asked many times online, but the answers always consisted of getting a parameter from the user and to the report. That is NOT what everyone was asking. I would like to know how to pass a parameter I already have into my stored procedure. Using Visual Studio 2005, in the "Data" tab of a report calling something likeUnique_Login_IPsreturns correctly when that stored proc takes no params, but when I have one that takes the year, for example, I do not know how to pass this info in. Note: the following does not work in this context : EXEC Unique_Login_IPs ParameterValue nor does EXEC Some_proc_without_paramsVisual studio seems to want only the procedure name because it returns errors that say a procedure with the name "the entire line above like EXEC Unique_Login_IPs ParameterValue" does not exist.... Thanks in advance,Dustin L
I have defined a monthly substription for a series of reports. I would like to be able to pass a paremter used in generating the report to the file name define in the subscription.
I can do it if I used system names such as @datetime, but I want to be able to use a parameter unique to the report.
For example if the parameter for the report was CARS and I was quesrying Toyotas how can I get toyoats to show up in the file name?
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details) X1 Y1 X2 Y2 X3 - X4 - X5 - - Yn - - - Xn What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing. Awaiting your opinions Thanks and Regards GM
I am new to reporting services and wanted to see if anyone had any experience trying to do this...that "this" is passing a parameter to a report, but having the user fill in some others. I can pass all of my parameters to the report or let the user fill all of them in, but it doesn't seem to let me fill in one and have the users fill in the others.