Sub Query Error(its Very Urgent)
May 6, 2008
hi frenz:
This is my query:it shows the following
error:Incorrect syntax near the keyword 'as'.plz let me know my error, and how to correct it.
My Query:
SELECT EH.EmpID, EL.UserName,EL.Password, E.FirstName, E.LastName, E.DesignationID,
E.DepartmentID, E.Sex, E.DOB, E.Age, E.Address, E.Email,
'ContactNo'= Case When E.phone is not null Then E.phone When E.phone is null
Then E.Mobile End ,E.DateOfjoining, D.Designation, DE.Department,E.HobbyID
where E.HobbyID in
(select EH.HobbyID from EMP_Tbl_EmployeeHobbies EH inner join EMP_Tbl_Hobby H on EH.HobbyID=H.HobbyID) as item1,
From dbo.EMP_Tbl_Employee E
Inner Join dbo.EMP_Tbl_Designation D On E.DesignationID=D.DesignationID
Inner Join dbo.EMP_Tbl_Department DE On E.DepartmentID=DE.DepartmentID
Inner Join dbo.EMP_Tbl_EmployeeHobbies EH On E.EmpID=EH.EmpID
Inner Join dbo.EMP_Tbl_EmployeeLogin EL On E.Sno=EL.Sno
View 1 Replies
ADVERTISEMENT
Mar 28, 2007
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
View 4 Replies
View Related
Jul 20, 2005
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
View 1 Replies
View Related
Oct 13, 2000
I have three problems related to Sql Server
a.I am developing a database application using VB5/VB6, SQL server 7 and Crystal reports.When I try to generate reports I get the message 'Automation error'. Please help-urgent.
b. I am using temperorary tables to generate reports.ie Table is created by user.Tables are generated runtime ie created as well as deleted. Sometimes
Sometimes i get the message 'SQLServer error' What should I do.What are the rights to be assigned to LOGINS?.
c.Is there precaution while installing SQLserver in WIN98.
View 1 Replies
View Related
Jan 22, 2001
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
View 1 Replies
View Related
Nov 15, 2001
Hi ALL,
I am looking for a query to solve this.
I had two table's.
1) Employee Table
Employee_ID Designation
---------- -------------
Savin Database Administrator
Ray Software Engineer
Adam Software Engineer
Scott Software Engineer
2). EmployeeCred Table
Employee_ID SkillSet
----------- ---------
Savin Oracle8i
Savin SQL Server 7.0.
Savin SQL2000
Ray VB 6.0
Ray Java2.0
Ray C++
Adam Share point
Adam VB 6.0
Adam Java2.0
Scott ASP
Scott VB 6.0
Output I requried.
-----------------
Employee_ID Designation SkillSet
------------ ------------ --------
Savin Database Administrator Oracle8i, Sql Server 7.0, SQL2000
Ray Software Engineer VB 6.0, Java2.0, C++
Adam Software Engineer Share point, VB 6.0, Java2.0
Scott Software Engineer ASP, VB 6.0
I need a query to solve this problem. Kindly please help me. Its urgent!!!
Thanks in advance.
venkat.
View 4 Replies
View Related
Aug 14, 2002
Here is the scenario:
There are 2 tables:
1. ItemMaster Table: This table contains all the available Items (around 500,000). Fields are:
(a) ItemId Integer (PK)
(b) ItemDetails Varchar(100)
2. ItemImage Table: This item contains the location of picture of few items out of above table (around 10,000). Fields are:
(a) ItemId Integer (PK)
(b) ImageURL Varchar(50)
Requirement: I want to create a query or stored procedure, which would return me: ItemId, ItemDetails and a flag to indicate if image is available for that item or not.
Can anybody help me out in getting this flag which has to be build dynamically in the query as its not there in the tables. And what would be the query for acheiving the desired result.
Thanks in advance
Dinesh
View 4 Replies
View Related
Apr 5, 2001
Hi,
I am a new SQL programmer. I need your help for writing a query. I am able to get the desired result set by looping through but it takes lots of time and resourses to run and crashes my machine. Is there any way to write a sql statement which performs batchwise? I really appreciate your help.
Following is a data from a view called ind_results.
last_name first_name course_code course_title score
-------------------------------------------------------------------------
Walker Jay 1 Mid-Term Exam 71
Walker Jay 2 Final Part I Online Exam 64
Walker Jay 3 Final Exam Part II Online Exam NULL
Reed Steve 1 Mid-Term Exam 70
Reed Steve 2 Final Part I Online Exam 78
Reed Steve 3 Final Exam Part II Online Exam 80
I need help in writing a query, where
1) If Score is null for either course_code 2 or 3, display score = 'incomplete' for course_code 2 and 3 (for Jay Walker)
2) If Score is not null for either course_code 2 or 3, display score = average value of score for course_code 2 and 3 (For steve Reed)
i.e. the resultset should look like this.
last_name first_name course_code course_title score
-------------------------------------------------------------------------
Walker Jay 1 Mid-Term Exam '71'
Walker Jay 2 Final Part I Online Exam 'incomplete'
Walker Jay 3 Final Part II Online Exam 'incomplete'
Reed Steve 1 Mid-Term Exam '70'
Reed Steve 2 Final Part I Online Exam '79'
Reed Steve 3 Final Exam Part II Online Exam '79'
I have at least 67000 rows in a view.
How can I display the desired result?
Thanks for reading it through
View 3 Replies
View Related
Jun 13, 2001
Hi ,
I am a new programmer. I need help on writing a query to accomplish the following.
Data is like this:
part_no status replaced_by_part_no
A111 superceded B111
B111 superceded C111
C111 superceded D111
D111 current null
I am trying to write a query where I get the following result. Basically
I have to display latest part_number in the chain with status as 'current'
for any part number that is superceded by another part_number.
part_number new_part_number
A111 D111
B111 D111
C111 D111
Please help.
I have written a code using cursor. But I just learnt that cursor should not be used. So I am looking for different syntax so that I can learn programming without cursor.
Thanks,
View 1 Replies
View Related
Oct 22, 2001
Hello I have the following query that is producing the following errors;
Code:
declare @temp_request as varchar(8)
Select request as temp_request,BUSINESS_REQ_ID,TEST_CASE_SOURCE as SOURCE from TEAM3B_PULL_TOTAL_TST
if (not exist (select * from TEST_REPORT.dbo.BUS_REQ_DESCRIPTION_TST where REQUEST = temp_request))
begin
Insert into TEST_REPORT.dbo.BUS_REQ_DESCRIPTION_TST(request,bu siness_req_id,source)
select request,business_req_id,test_case_source from TEAM3B_PULL_TOTAL_TST where request=temp_request
end
Else
begin
Insert into TEST_REPORT.dbo.RDD_UPDATE_TST(request,business_re q_id,test_case_id,test_case_descr)
select request,business_req_id,test_case_id,test_case_des cr from TEAM3B_PULL_TOTAL_TST where request=temp_request
end
Errors:
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'select'.
Server: Msg 170, Level 15, State 1, Line 4
Line 4: Incorrect syntax near ')'.
Server: Msg 156, Level 15, State 1, Line 11
Incorrect syntax near the keyword 'Else'.
Thank you in advance,
Terry
View 1 Replies
View Related
Nov 15, 2001
Hi ALL,
I am looking for a query to solve this.
I had two table's.
1) Employee Table
Employee_ID Designation
---------- -------------
Savin Database Administrator
Ray Software Engineer
Adam Software Engineer
Scott Software Engineer
2). EmployeeCred Table
Employee_ID SkillSet
----------- ---------
Savin Oracle8i
Savin SQL Server 7.0.
Savin SQL2000
Ray VB 6.0
Ray Java2.0
Ray C++
Adam Share point
Adam VB 6.0
Adam Java2.0
Scott ASP
Scott VB 6.0
Output I requried.
-----------------
Employee_ID Designation SkillSet
------------ ------------ --------
Savin Database Administrator Oracle8i, Sql Server 7.0, SQL2000
Ray Software Engineer VB 6.0, Java2.0, C++
Adam Software Engineer Share point, VB 6.0, Java2.0
Scott Software Engineer ASP, VB 6.0
I need a query to solve this problem. Kindly please help me. Its urgent!!!
Thanks in advance.
venkat.
View 2 Replies
View Related
Nov 15, 2001
Hi ALL,
I am looking for a query to solve this.
I had two table's.
1) Employee Table
Employee_ID Designation
---------- -------------
Savin Database Administrator
Ray Software Engineer
Adam Software Engineer
Scott Software Engineer
2). EmployeeCred Table
Employee_ID SkillSet
----------- ---------
Savin Oracle8i
Savin SQL Server 7.0.
Savin SQL2000
Ray VB 6.0
Ray Java2.0
Ray C++
Adam Share point
Adam VB 6.0
Adam Java2.0
Scott ASP
Scott VB 6.0
Output I requried.
-----------------
Employee_ID Designation SkillSet
------------ ------------ --------
Savin Database Administrator Oracle8i, Sql Server 7.0, SQL2000
Ray Software Engineer VB 6.0, Java2.0, C++
Adam Software Engineer Share point, VB 6.0, Java2.0
Scott Software Engineer ASP, VB 6.0
I need a query to solve this problem. Kindly please help me. Its urgent!!!
Thanks in advance.
venkat.
View 1 Replies
View Related
Apr 20, 2006
DATEDIFF([day], dbo.Nonconformances.OpenDate, GETDATE()) AS [Days Still Active],
what is its function ?
View 1 Replies
View Related
May 23, 2007
Hi
I have a report which has a table and that table has 4 columns
I want to represent the Data like this.
Company Match or Profit Sharing or Safe Harbor Company Match or ProfitSharing or Safeharbor
Years of Service Vesting Years of service Vesting
1 40 1 50
I have 3 text boxes saying Company Match, Safe harbor and Profit Sharing, and the User normally can click 2 checkboxes
Suppose if the user clicks only company Match, i want the company Match to display on the left hand side if the users clicks on 2 things say company match and safe harbor.
I want the Company match to come on the left and safe harbor to be on the right. and my Expression is as follows:
for the Left hand side its :
IIf(Fields!CompanyMatch.Value = true,"Company Match",IIf(Fields!SafeHarbor.Value = true,"Safe Harbor","Profit Sharing"))
and the right hand side its:
IIf(Fields!ProfitSharing.Value = true," Profit Sharing","")
so how can i display the details in the above fashion.
any help is appreciated.
Regards,
Karen
View 4 Replies
View Related
Nov 27, 2007
WITH
SET [FilteredAccountSet] AS 'order( [Acc€”BU_ Account_BCDsc].[Account],[Measures].[_MeasureBillingCode],ASC)'
SET [FilteredBUList] AS 'order( [Acc€”BU_ Account_BCDsc].[Business Unit],[Measures].[_MeasureBillingCode],ASC)'
SET [FilteredBillingCodeSet] AS 'order( [Acc€”BU_ Account_BCDsc].[Billing Code Description],[Measures].[_MeasureBillingCode],ASC)'
SET [FilteredEngagementGroupSet] AS '[Acc€”BCEngTypeGroup_BCDsc].[Billing Code Engagement Type Group]'
MEMBER [Measures].[AverageTeamSize] AS '[Measures].[Consultant Utilization]/(COUNT(GENERATE({[Date€”Year_Month_Day].
[Date€”Year_Quarter_Month].[All Date€”Year_Quarter_Month].[2007].[Quarter 1].[May]:
[Date€”Year_Month_Day].[Date€”Year_Quarter_Month].[All Date€”Year_Quarter_Month].[2007].[Quarter 1].[July]},
DESCENDANTS([Date€”Year_Month_Day].CURRENTMEMBER,[Date€”Year_Month_Day].[Day]))))'
MEMBER [Measures].[MdaCodeTotal] AS
'VBA!ABS([Measures].[AverageTeamSize])+
VBA!ABS (([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service].[On - site],[Measures].[Amount Usd]))+
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service].[Off shore],[Measures].[Amount Usd] )) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service Travel & Other],[Measures].[Amount Usd] ))+
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode], [Measures].[Effort Based Cost])) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Pulse Non Compliance Cost])) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Expense].[On-site living],[Measures].[Amount Usd] )) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Expense].[Other Expenses],[Measures].[Amount Usd] )) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Effort Based Onshore Billing Project Days])) +
VBA!ABS(([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Effort Based Offshore Billing Project Days]))'
SELECT {
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Billing Code ATC List]),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[AverageTeamSize]),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Billing Code Engagement Type Group]),
([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service].[On - site],[Measures].[Amount Usd]),
([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service].[Off shore], [Measures].[Amount Usd]),
([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Revenue].[Service Travel & Other],[Measures].[Amount Usd]),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Effort Based Cost] ),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Pulse Non Compliance Cost]),
([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Expense].[On-site living],[Measures].[Amount Usd] ),
([Ledger€”L1_L2_L3_L4_AccountCode].[All Ledger€”L1_L2_L3_L4_AccountCode].[Expense].[Other Expenses],[Measures].[Amount Usd] ),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Effort Based Onshore Billing Project Days]),
([Ledger€”L1_L2_L3_L4_AccountCode],[Measures].[Effort Based Offshore Billing Project Days])
} ON COLUMNS,
NON EMPTY
{
filter(
[FilteredAccountSet],[Measures].[_MeasureDataPresentBillingCodeDsc] = 1)
}
ON ROWS
FROM [Profitability]
WHERE ([Date€”Year_Quarter_Month].[All Date€”Year_Quarter_Month].[2007].[Quarter 1].[May]:
[Date€”Year_Quarter_Month].[All Date€”Year_Quarter_Month].[2007].[Quarter 1].[July])
m newbie for reporting services the above query is working on sql management studio but not working on Visual Studio BIwhy is that?pls reply me urgent
View 2 Replies
View Related
Apr 20, 2008
OPEN orabaan
declare
@batch int,
@ttype char(3),
@doc int,
@ttdr float,
@ttcr float,
@diff float,
@s1r int,
@s2r int
WHILE
@@FETCH_STATUS = 0
BEGIN
FETCH NEXT FROM orabaan
INTO @batch,
@ttype,
@doc,
@ttdr,
@ttcr,
@diff
if @diff < 0
update
ttfgld102777
set
t_amth_2 = (t_amth_2 + @diff)
where exists
( select top 1 t_amth_2 from orabaan
where
t_dbcr = 1
==> and t_btno = @batch
and t_ttyp = @ttype
and t_docn = @doc )
==============================
I want to add a clause to auto update t_btno when value occur as "t_btno" is variable int
simple data
t_btno t_ttyp t_docn t_dbcr t_amth_2
17 NI1 20050205 1 -3914482498.0
17 NI1 20050205 1 -3914484153.3000002
17 NI1 20050205 2 -3914482497.3000002
17 NI1 20050205 1 -3914482497.3000002
17 NI1 20050205 2 -3914482498.0
17 NI1 20050205 2 -3914484153.3000002
I want to update first row only for each t_btno
thanks regards
View 3 Replies
View Related
May 15, 2007
Hello. I have a question. I have a table that keeps track of
claims being made by clients (like insurance claims). There is a table which
has 2 fields. Field1 and Field2. Field1 has the original claim number. If an
adjustment is made to the claim, a new claim number will be generated. For example
if a person pays $100 and files a claim, he is issued a claim number which goes
into Field1. If that person spends some more money towards the same issue and
then files another claim then he is given a new claim number which is stored in
Field2.
Field1--------------Field2
--------------------------------
100--------------------150
150--------------------200
200--------------------250
250--------------------Null (No more adjustments made)
and so on.
So in the query I will supply a claim number (say 100). I
need to get the history of all the claims attached to it. In this example 100,
150, 200, 250.
Also if the claim number provided is 200 I need to get the
original claim number (which is 100) meaning I need to back track and forward
track too. I need this in SQL Server 2000.
I hope I am clear enough. Thanks.
View 3 Replies
View Related
Sep 26, 2007
i am working on asp.net
i am passing two values through querystring to the next page, that values are comming to next page but i want to display results on these two crieria hats.
i have written following query which working fine in sql server 2000
SQL 2000==> select caterername, ccity from caterer where ccity='matunga' and cateringfor like '%event%'
but when i am trying to do this in asp.net its not working. following code accepting only one value . i want to compair two value. Please guide me how to write above query in asp.net using 'and' and 'like' operatorasp.net ==>select * from addahall where HCity='" + city + "' ==> city is variable
please let me know as early as possible i have very less time.
View 5 Replies
View Related
Dec 18, 2001
The question is regarding licences for clients who want to put their databases on the internet using our web servers. We have this in our price list as a service. We have been offering this service for a ong time.
Now we are using old licences v 7.0 for NT servers, and we need version w2000 for w2000 servers.
Our doubt is how to work the concurrent users through the internet. Can a server with mnimum number of licences serve hundereds of users through the internet,since users don't access the sql databases directly?
If anyone could help I would really appreciate it, or even offer a reference article
View 2 Replies
View Related
Apr 27, 2001
Im trying to transfer data from SQL tbl to .xls file through a DTS package.
My problem is that DTS transfers all the data from the source tbl to .xls
file.
But i would like to have the selective data transfer based on some query like ;
select * from tbl where field ='val'
for the val i want to pass different values .
instead of complete data transfer.
Thanks in advance.
Regards
Anand
View 3 Replies
View Related
May 19, 2001
Hi Every1 there,
I have 3 tables
Items
-----
Item_code
item_desc
gp_code
cat_code
and
inv_header
---------
invhkey
trnno
trndate
tot_amount
tot_discount
inv_Details
----------
invdetkey
invhkey
item_code
qty
rate
discount
i want a way in which i should b able to view the information in this format.
Gp_code Item_code item_Description
eg: 01aa abc abcdedf
Sales
May2001 Apr2001 Mar2001 Feb2001 Jan2001 Dec2000 till May2000(i.e 1 year)
if possible i want a flexibility wherein i should b able to give the gp_code and all the items in tht gp_code should b displayed in above format where in the starting monthh will b the current month .
Any help will b highly appreciated.
Thanx.
View 1 Replies
View Related
May 9, 2000
Hi all,
I am running a query which was created by front end application on (9 tables and one view) VIEW was created on 3 tables...Each table is having millions of records.. In this query there nearly 30 where conditions..are there..
When i run query plan , it is using HASH JOIN..
when i run a query, it is giving ERROR 1101..It is occupying all tempdb size, i gave autogrowth of tempdb, then also tempdb memory is not enough for this query...
I am having all possible indexes on all tables including tables which are used in VIEW.
and also i tried to run PERFORM INDEX ANALYSIS on this query , it is running ,after 10 minutes i stopped the PERFORM INDEX ANALYSIS.. because it is taking so much of time..
I believe this query is retrieving millions of records,but i dont know what to do with this one.. Pls anyone suggest me, how my query is taking so much time , is this because of HASH JOIN.
I think if we have service pack2, can avoid this problem, am i right(if we have so many records in table)
Pls suggest the way....
raj
View 3 Replies
View Related
Nov 21, 2001
Hello,
I have a table with 3 cols--- id1,id2 and id3
Total no.of rows-- 18
id1id2id3
11
25
35
45
51
6100
7100
845
944
1045
11100
126
136
141
152
163
17111
18123
id1 is an identity column.
I have to populate third column which is id3 based on the data in id2.
I have to group similar values in id2 together
and insert 1,2,3 accordingly in id3.
For eg: we have three 100's in id2, so we should have values 1,2,3 for id3.
we have two 45's in id2, we should have values 1,2 for id3.
so final output should be:
id1id2id3
111
251
352
453
512
61001
71002
8451
9441
10452
111003
1261
1362
1413
1521
1631
171111
181231
Is it possible?
Please help!!!!!!!
Thanks,
cheryl
View 3 Replies
View Related
Apr 12, 2005
Hi Guys,
I have a table created like
(cname,perfweek,orderstaken,callsmade).
the application give a report of perticular salespersons(cname) performance by ordertaken and callsmade.
somedays back, they have entered different cname for the same person. What I wanted to do is, when they give me correct cname and the wrong cname, I will have to findout in a perticular week, is there are duplication of cname and if then I have to add orderstaken and callsmade to the correct Cname for that particular week and after that delete the wrong Cname detail for that particular week(because it is added to the correct cname rows for that week).
And then I have to change the wrong Cname to the correct Cname for all the rows, if there is no data found for right cname matching for that week.
cname perfweek orderstaken callsmade
----- ------- --------- --------
abc 1 3 4
bbb 1 5 6
abc 3 3 1
bbb 3 2 3
bbb 2 4 5
in this eg: abc is the right cname and bbb is the wrong cname. Here what I have to do is I have to combine rows for the correct and wrong cname for that particular week ie: now the table looks like :
cname perfweek orderstaken callsmade
---- ------- ---------- ----------
abc 1 8 10
bbb 1 5 6
abc 3 5 4
bbb 3 2 3
bbb 2 4 5
(note: after combine, I have to delete the bbb for the perfweek of 1 and 3)
and then I have to update the rest of the wrong cname to the correct cname.
Then the firnal table looks like
cname perfweek orderstaken callsmade
----- ------- --------- --------
abc 1 8 10
abc 3 5 4
abc 2 4 5
It is an urgent requirment and I will really appreciate your valuable inputs.
Thanks very very much.
View 1 Replies
View Related
Oct 27, 2004
:confused: :confused: Hi All,
I am new to SQL Server. I want to know about SQL Query execution and compilation sequence.
Consider the following case:
SELECT A.COL1, B. COL2
FROM TAB1 A
INNER JOIN TAB2 B
ON A.COL5 = B.COL5
WHERE A.COL3 = 'A' AND B.COL3 = 'B'
Now as per my records into TAB1 and TAB2, condition B.COL3 = 'B' can reduse more number of rows then condition A.COL3 = 'A'.
So, please let me know above way to write the query is proper or not in given senario.
It would be great if one can provide the details how Sql Server 2000 compile and execute the query and some relavent data to optimize the performance while writting SQL query.
Thanks in Advance,
Jai
View 4 Replies
View Related
Nov 2, 2004
i want to create a join query (for view) that will show one data per day for each agent.
just a select query joing these two tables..Seems like the date field is given me problem
i want result like below
TOTALCALL , TOTALESCA , AGENTID , DATE
50 , 5 , IDME1 , 10/28/2004 12:28:00 PM
TOTALESCA shows NuMbers of escalated calls out of totalcalls
table 1
TOTALCALL
AGENTID
DATE
TABLE 2
TOTALESCA
AGENTID
DATE
SAMPLE DATA ON TABLE 1
TOTALCALL, AGENTID, DATE
50 , IDME1 , 10/28/2004 12:28:00 PM
SAMPLE DATA ON TABLE 2
TOTALESCA, AGENTID , DATE
5 , IDME1 , 10/28/2004 12:28:00 PM
View 14 Replies
View Related
Feb 17, 2004
Folks
I have two queries
Select Account_Id , Branch_Cd from Accounts
SELECT SUM (dbo.HOLDING.Shares_Par_Value_Qty * dbo.ASSET.Current_Prc) AS MarketValue
FROM dbo.HOLDING INNER JOIN
dbo.ASSET ON dbo.HOLDING.Property_Num = dbo.ASSET.Property_Num
Group by dbo.HOLDING.Account_ID
Account_ID is the same in both the queries ie in both the tables
Holding and Account.
I need the output like this
Select Account_Id, Branch_Cd, MarketValue from -------
But MarketValue should be calculated exactly in the above method.
How do I combine these two queries. I need it asap.
Help me out.
Thanks
View 2 Replies
View Related
Apr 10, 2008
I am facing a query problem.i have 2 tables called emp-table and report-table.report table for listing report of employees.
following are criterias..
1 I want list all reports from report-table
2 But no report should have empstatus 5
3 reports need not necessary to have emp-table reference.ie emp-id reference in emp_table.
briefly saying i want all reports from report table,in which no one have empstatus 5
emp-table
empid
empname
empstatus
report-table
repid
empid
details
thanks in advance.
View 4 Replies
View Related
Jan 10, 2007
Please help me with the query to get the following result. I am so much worried with this and if some one can give me a query to form this, I will be so thank full
I have 3 tables
1. Quote
2. QuoteProdList
3. QuoteVersion
In Quote Table, I am storing the QuoteNumber,QuoteReferenceNumber and CustomerName
In QuoteprodList I am storing QuoteNumber and FasValue
In QuoteVersion, I am storing different versions of these QuoteRefNo
My problem is I have to get the sum of Fas value group by Customer name, but this should be for the latest version of quote.ie, In QuoteVersion Table, if some value is there in version2 field, it should take the fas value from QuoteProdList, given with the quotenumber specified in Version2 field of QuoteVersion Table.
Quote
-----
QuoteNumber.......CustomerName......QuoteRefNo
----------------------------------------------
1.................a.................xyz
2.................b.................abc
3.................a.................xyz
4.................c.................efg
5.................d.................hij
6.................a.................klm
7.................d.................hij
QuoteVersion
------------
QuoteRefNo..............Version1........Version2
------------------------------------------------
xyz.....................1..................3
abc.....................2..................Null
efg.....................4..................Null
hij.....................5..................7
klm.....................6..................Null
QuoteProdList
-------------
QuoteNumber...........Fasvalue
------------------------------
1.......................20
2.......................32
3.......................40
4.......................12
5.......................6
6.......................10
7.......................30
For me, the out put should be
CustomerName......FasValue
--------------------------
a..................50
b..................32
c..................12
d..................30
Customer ' a is having 2 quoterefno in Quote Table,xyz & klm. From QuoteVersion Table ,take QuoteNumber 3 for xyz specified by Version2 field, take it's fas value from QuoteprodList(40)+QuoteNUmber 6 specified by Version2 field, take is fas value(10)=50)
Customer d is having two quotenumbers in version1 and 2, so take the quote number in version 2 and take fas of 2 from quoteprodlist,ie, 30
Please help me to solve this.
Regards
Ceema
View 10 Replies
View Related
May 29, 2007
Dear Friends
I have 3 form with these names :
Clients <----- Projects <------- Files
I am using this query in my [ web ] page :
select clients.id ,
(select count(*) from projects where projects.clients_id = clients.id) as TotalProjects
from clients
I want to compute SUM for all relevant files for each client's projects.
how i can add it to select select statement ??
thank you.
m.o
View 5 Replies
View Related
Oct 2, 2007
Hi,
I am using this stored procedure to populate a report... if the particular report value is NULL i am getting this error
Cannot read the next data row for the data sest PlanEligiReqattri. Invalid lenght parameter passed to the right function...
This is my stored procedure
Code Block
ALTER Procedure [dbo].[rpt_PlanEligiReqAttriApplied]
@PlanId int
AS
BEGIN
Declare @List varchar(255)
Set @List =' '
Select @List = @List + ', ' + PERA.Name
From PlanEligibilityReqAttriApplied PERAA
Inner Join PlanEligibilityReqAttributes PERA on PERAA.PlanEligibilityReqId = PERA.PlanEligibilityReqId
Where PlanId = @PlanId
select Right(@List, Len(@List) - 2)
--set @List = Right(@List, Len(@List) - 1)
End
any help will be appreciated.
Regards
Karen
View 3 Replies
View Related
May 24, 2007
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
View 5 Replies
View Related
Mar 28, 2002
Hi All,
I am getting the following error in DTS.
I request you to help me in this regard.
Error: -2147467259 (80004005); Provider Error: 3023 (BCF)
Error string: Backup, CHECKALLOC, bulk copy, SELECT INTO, and file manipulation (such as CREATE FILE) operations on a database must be serialized. Reissue the statement after the current backup, CHECKALLOC, or file manipulation operation is completed.
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Thanks in advance.
Regards
Kalyan Kumar
View 1 Replies
View Related