Sub Select Statement Error.. Plizz Help.. :)
Nov 2, 2006
Hi,
I try to insert record using select statement.
But, I am having a problem with this code:
Insert into PaymentVoucherTable (ID, Duration1, min1, Total1, Duration2, min2, Total2)
select (ID, Duration1, min1, (Duration1 * min1), (select Duration2,min2,(Duration2 * min2) from Table2)
from Table1
The MSSQL keep displaying error message : "the number of column in INSERT statement is not the same as the select statement...".
Is my subselect statement structure correct ???
Thanks...
View 2 Replies
ADVERTISEMENT
Jul 3, 2007
hi i have copied this from my other page where it works fine and i cant understand what is going wrong! maybe one of your guys can point out what i cant see! herei s my code
string strOrderID = Request.QueryString["orderID"].ToString();int intOrderID = Convert.ToInt32(strOrderID);
int intCustID = Convert.ToInt32(Request.QueryString["qsnOrderCustID"].ToString());lblCustomerID.Text = Request.QueryString["qsnOrderCustID"].ToString();lblOrderID.Text = Request.QueryString["orderID"].ToString();
SqlConnection myConn = new SqlConnection("Data Source=xxxx;Initial Catalog=xxxx;User ID=xxxx;Password=xxxx");
//This is the sql statement.string sql = "SELECT [del_address], [del_post_code], [del_time] From tbl_del WHERE order_ID = " + intOrderID;
//This creates a sql command which executes the sql statement.SqlCommand sqlCmd = new SqlCommand(sql, myConn);
myConn.Open();SqlDataReader dr = sqlCmd.ExecuteReader();
//This reads the first result from the sqlReader
dr.Read();
try
{
lblDelTime.Text = Convert.ToString(dr["del_time"].ToString);
lblDelAddy.Text = dr["del_address"].ToString();lblDelPCode.Text = dr["del_post_code"].ToString();if (lblDelAddy.Text != "")
{
lblDelDate.Visible = true;lblDelTime.Visible = true;
Label1.Visible = true;Label2.Visible = true;
}
}catch (Exception except)
{lblerror.Text = Convert.ToString(except);
}
Regards
Jez
View 3 Replies
View Related
Jul 13, 2007
Receive Error: when I Run Select Statement Asking to Declare @Country
Not sure how to Declare the variable '@Country'. Any help would be appreciated... Thank You.
Here is the Code:
____________________________________________________________________________________________________________
Private Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
If Not IsPostBack Then
Dim conCommerce As SqlConnection Dim cmdSelect As SqlCommand Dim CategoriesCounter As SqlDataReader Dim StylesSource As SqlDataReader
conCommerce = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
conCommerce.Open()
cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)
StylesSource = cmdSelect.ExecuteReader()
txtCounter1.DataSource = StylesSource txtCounter1.DataTextField = "Country"
txtCounter1.DataBind()
StylesSource.Close() conCommerce.Close()
End If
______________________________________________________________________________
Error Message:
Must declare the variable '@Country'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@Country'.
Source Error:
Line 220: cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)Line 221:Line 222: StylesSource = cmdSelect.ExecuteReader()Line 223:Line 224:
View 2 Replies
View Related
Apr 24, 2008
In SQL Sever 2005, I am trying to retrieve data using this simple query from a table called 'User':
select *
from dbo.User
where UserID='sam'
And, I keep getting the following error:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'User'.
Thank you for your help
View 1 Replies
View Related
Jul 20, 2005
Please help me debug this statement:Select vVehRegNAddr.RegContChar1 From (((vVeh LEFT OUTER JOINvVehBrand ON vVeh.Plate = vVehBrand.Plate) LEFT OUTER JOINvVehRegNAddr ON vVeh.Plate = vVehRegNAddr.Plate) LEFT OUTER JOINvVehLegal ON vVeh.Plate = vVehLegal.Plate) Where ((vVeh.Active = 1)AND (vVeh.VUse NOT IN ('C/G','H/D','SNO','SNX')) AND (vVeh.LExpDt ='20050715'))ERROR MESSAGE:"Error in selection of Aggregates:If ANY aggregate functions(Count, Sum,...) are chosen,All fields mustbe aggregate that are not in Grouping"
View 2 Replies
View Related
Apr 2, 2004
grr.
I have two different select statements that are giving me the same error.. and its getting irritating cause i cant figure out why...
the error IS --tada--
------------------------------------------
ADODB.Recordset error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.
/vendorlist.asp, line 68
-----------------------------------------
Here's the statement.. and ill point out line 68 below with a few other details...
-----------------------------------------
Dim vendorRS, SQL
set vendorRS = Server.CreateObject("ADODB.Recordset")
SQL = "SELECT ttVendors.company, ttVendors.website, ttVendors.phone, ttVendors.phone800,ttVendors.vendorID," &_
SQL = SQL & "ttInventory.newprice, ttInventory.refurbprice, ttInventory.oosprice, ttInventory.venddescrip" &_
SQL = SQL & "FROM ttVendors INNER JOIN ttInventory on ttVendors.vendorID = ttInventory.vendorID" &_
SQL = SQL & "WHERE ttInventory.prodID = '" &prodID& "'"
vendorRS.Open SQL ,objCn, 1, 3
DIM company
company = vendorRs("company")
vendorRs.close
set vendorRs = nothing
---------------------------------------------
Ok so... line 68 IS
vendorRS.Open SQL ,objCn, 1, 3
ive tried it like
vendorRS.Open = SQL ,objCn, 1, 3
vendorRS.Open, SQL ,objCn, 1, 3
vendorRS.Open SQL ,objCn, 3, 3
no luck..
Also, prodID is passed from a querystring from previous page.. just used the typical request object to gather.. in the DB, all prodID fields are of INT type.. and im wondering if that makes a difference..
any ideas.. or blanks i can fill it?
View 1 Replies
View Related
Feb 10, 2015
I am receiving error msg on the below query line as "incorrect syntax near MSF" , "Incoorect syntanx near ExtCost", "incorrect syntax near From on line 28"
SELECT
xxxcolumns,
(rj.RECEIVEDLINEAL * ((r.WIDTH / 12.0)) / 1000.0 MSF,
Case
when rv.PricePerCode = 'MSF' Then
((rj.RECEIVEDLINEAL * (r.WIDTH / 12.0)) / 1000.0) * rv.price
[Code] ....
View 1 Replies
View Related
Mar 9, 2008
The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:
"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"
Compact 3.5 doesnt like the SELECT statement claiming that:
There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]
Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?
I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.
View 9 Replies
View Related
Jul 28, 2015
Have run to a select permission error when attempting insert data to a table. received the following error
Msg 229, Level 14, State 5, Line 11
The SELECT permission was denied on the object 'tableName', database 'DBname', schema 'Schema'.
Few things to note
- There are no triggers depending on the table
- Permissions are granted at a roll level which is rolled down to the login
- The test environments have the same level of permission which works fine.
View 6 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Oct 7, 2015
Naming convention and what am I doing wrong here:
,(Select Count(C2.AppID) From Channels c left join Applications a on c.ChannelID = a.SourceID left join Contracts2 c2 on a.AppID = c2.AppID Where Channels.ChannelID = c.ChannelID and c2.DateContractFunded > (Select dateadd(yy,-1,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) and c2.DateContractFunded < (Select dateadd(ms,-3,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) ) As FundedLastYear
FROM Channels AS C
INNER JOIN ChannelContacts AS CC ON C.ChannelID = CC.ChannelID
INNER JOIN ChannelProductPlan AS CPP ON C.ChannelID = CPP.ChannelID
INNER JOIN tblLuMktReps AS MR ON C.MarketRepID = MR.MarketRepID
INNER JOIN tblLuHoldingCo AS HC ON C.HoldingCoID = HC.HoldingCoIDError message:
Msg 107, Level 16, State 3, Line 1
The column prefix 'Channels' does not match with a table name or alias name used in the query.
View 9 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Aug 10, 2006
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View 1 Replies
View Related
Sep 17, 2007
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies
View Related
Aug 6, 2007
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
View 2 Replies
View Related
Jul 11, 2007
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
View 2 Replies
View Related
May 15, 2008
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
View 2 Replies
View Related
Apr 21, 1999
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
View 1 Replies
View Related
Aug 23, 2013
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....
View 1 Replies
View Related
Jul 31, 2014
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Sep 7, 2006
Hi All,
Can some one point me in the right direction in how to construct my SQL query within my cursor?
I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So:
SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id
so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log
and do other statements if there is no match
how do i add this condition to my statement either using an if...else statement proceeding to the next row?
here is the statment i attempted to write:
SELECT column_List
FROM table1
WHERE
Table1_id = Table2.id
now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id
IF table1.id <> table2.id
BEGIN
SET @DebugMessage = 'data not live.'
RAISERROR (@DebugMessage, 16, 1) WITH LOG
END
essentially what i am trying to sayin my statement is:
go to the first row
check if it has a match in table 2,
if there is no match execute a number of statements such as error loging e.t.c
go to the next row
repeat the previous statements
...i also looked through some Case...When statements am just not sure how to put in the condition
thanks in advance
View 1 Replies
View Related
Jul 5, 2006
I am a newbie to SQL. I have a table (AenComponent) with three columns (State1, State2, State3). Each column has a set of numeric values. I would like to get a number count from all of the rows that contain the value of 1, no matter which column they are in.
I have tried
SELECT COUNT(*) AS Expr1FROM AenComponentWHERE (State1 = 1) OR (State2 = 1) OR (State3 = 1)
but it does not give me an accurate count. Any help would be appreciated.
thanks
rusty
View 4 Replies
View Related
Dec 29, 2006
I'm trying to get a list of clients and their sum of total pmts, their pmt level, and pmt level description by date range.
Here is what I’ve tried and it will not work. I need to do this without using temp tables.
SELECT C.ClientID, SUM(P.AmountPaid) AS SumOfpmts, tblpmtLevels.pmtLevel, tblpmtLevels.DescriptionFROM tblPmts AS PL INNER JOIN tblPmtReceipts AS P ON PL.PmtID = P.PmtID INNER JOIN tblClients AS C ON PL.ClientID = C.ClientID INNER JOIN tblPmtLevels ON SUM(P.AmountPaid) >= tblPmtLevels.PmtLevelLow AND SUM(P.AmountPaid) <= tblPmtLevels.PmtLevelHighWHERE (P.PaymentDate BETWEEN @Start AND @End)GROUP BY C.ClientID
Please provide any help you can,
View 4 Replies
View Related
Mar 13, 2007
Hello, Is there a SQL SELECT Statement that can remove the time part in my DataTable. see example below
This is what I have in the first column 0 - MM/dd/yyyy 12:00:00 AM
This is what I want - MM/dd/yyyy
I would rather do it in the SELECT statement instead of doing it in my DataTable using the FORMAT function.
Thanks
Steve
View 5 Replies
View Related
Apr 18, 2007
I have a stored procedure that works like this
getCountryByIPAddress @ipaddr='1.2.3.4'
returns a single 2 char column.
I want to use it in a select statement similar to:
select customername, @country=(exec getCountry @ipaddr=customer.customeripaddress) from customer
I'm intend to receive a list of customer names and the 2 char result of GetCountry based on the customeripaddress field of the customer table. What I get is a syntax error near Exec and then another one near '.'
Is there another way to accomplish this that I am not seeing?
Ryan
View 6 Replies
View Related
May 29, 2007
Hi,
I am trying to select only the most recent record added to a table per user. Say the table has a userid, date, and a color and may look like this:
2 5/06/07 red
8 5/3/07 grey
2 5/13/07 green
4 4/30/07 orange
8 4/26/07 yellow
And I want, in any order:
2 5/13/07 green
8 5/3/07 grey
4 4/30/07 orange
Thanks for any help.
Greg
View 3 Replies
View Related
