I've recently just got started using sub queries. The sub query that I'm running is supposed to select distinct values out of a table. It doesn't seem to be working though.
SELECT id
FROM data
WHERE (issueID IN
(SELECT DISTINCT issueID
FROM data))
When I execute this query, it returns a list of id's, but they don't each have a unique issueID. In the data table, issueID can appear more than once (hence, I need to use distinct). However, id is the primary key, and is unique.
and (jobs.ApplicationsClosed > getdate() OR jobs.ApplicationsClosed = getdate())
The above statement does not pick jobs.ApplicationsClosed= 3/30/2004(that is today'sdate) If I change 3/30/2004 to 3/31/2004 it picks it up. What is wrong with my syntax?
There is a field which I'm doing a sUM() on to get a total for a QtyRecieved from one of the tbls in the SP.. However, the QtyRecieved field is set to be a two decimal place numeric field.
The sp works fine without issues until on the of the qty received is not a round number.
If it's a number with a decimal in it (i.e 5.5) then this is show as a seperate result and not SUM'd with the others.
Any ideas why?
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID, dbo.Suppliers_POs_Details.PODetailsStatusReason, SUM(dbo.Suppliers_POs_Details_Received.Qty) AS QtyReceived FROM PDS_Login.Supplier_Products INNER JOIN dbo.Suppliers_POs_Details ON PDS_Login.Supplier_Products.ProductID = dbo.Suppliers_POs_Details.ProductID RIGHT OUTER JOIN dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID GROUP BY dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID, dbo.Suppliers_POs_Details.PODetailsStatusReason, dbo.Suppliers_POs_Details_Received.Qty HAVING (dbo.Suppliers_POs_Details.POID = @POID)
In a stored procedure the following code snippet 1 checks against duplicate data being inserted. I've tested it with snippet 2 and it works as expected. However, when the procedure is called from ASP.NET the check seems ineffective. I still get the error msg. The application uses a SqlDataSource with the following parameters.
Any suggestions?
Thanks,
Bakis.
PS I want to ask a question on the ASP.NET forum .The login/pwd for this forum "get me in" to the .net forum in the sense that when I log in I see a logout link. I don't get an "ask a question" button though. Is there a separate screening for each forum?
<UpdateParameters>
<asp:Parameter Name="CatItemUID" Type="Int32" />
<asp:Parameter Name="CatName" Type="String" />
<asp:Parameter Name="Item" Type="String" />
<asp:Parameter Name="Quad" Type="Int16" />
<asp:Parameter Name="UID" Type="Int64" />
</UpdateParameters>
snippet 1 :
if (@CatItemComboExists > 0 ) BEGIN --print @CatItemComboExists return 0 END
snippet 2:
begin tran declare @return_status int EXECUTE @return_status = spUpdateCatItemRec 343, 'blah','blih', 2,3 print @return_status rollback
error msg only if proc is called from app
Violation of UNIQUE KEY constraint 'IX_tblCatItemUID'. Cannot insert duplicate key in object 'tblCatItemUID'.
Ok.. I have a web site I am developing in Visual Studio 2005. Its VB based with SQL Server 2005 as the backend. IIS 6 is the web engine and all of this is running on a Windows 2003 Server.
Here is the problem.. I have a form that authenticates a user and then redirects them to another page. The redirection is not working. All I get is 'Your login attempt was not successful. Please try again.' So I decided to trouble shoot a little and I added a Forgot your password control and a Sign up for new account control to the page as well. When I do the Forgot my password it sends me the username and password in an email, but it just refuses to accept them.
If I use the sign up for a new account control it actually lets me into the redirect page but if I log out and try to get back in it fails. Its crazy and if driving me out of my mind.
If someone wants to help me out I would appreciate it. I have been racking my brain over this for too many days.
Thanks in advance...
Mark
Ps. - I have read every thread and tried just about everything regarding this issue. It has to be something stupid and simple that I am overlooking.
I'm trying to run the following SQL against my ntext column, Testtbl.Task I want to replace where the ampersand sign got HTML encoded to "&", and I want to strip it down to only the ampersand sign and deletethe "amp" and the ";".It executes, but I still have the HTML encoding for the ampersand sign if the issue is NOT the first character in the ntext column. If it's the first part of the ntext column, then it works.
I have a problem with a conditional format of the Color property in a matrix report. When the value of the textbox is greater than 0, the color should be Red otherwise it should be Blue. This is implemented via an IIF statement and works perfectly in Preview in Visual Studio 2005.
When the report is deployed, the formatting appears to be ignored and all values are the default value of Black.
Anyone else experienced this problem and, if so, is there a workaround?
VS 2008. I have the following set up. Group1, Group2, Group3 header, Group 3 detail rows..When I set the row visibility (hide based on Group2) on the Detail row, it still shows up when the report is originally rendered.
It should be: Group1 expanded, Group2 collapsed, Group3 header hidden and detail rows hidden It is showing: Group1 expanded, Group2 collapsed, Group3 header hidden, Group3 detail row visible.
I never had this trouble in 2005. Is there something different about row visibility in 2008?
fetch next from emailCursor into @Name,@info, @Recipients,@MyMessage
end close emailCursor deallocate emailCursor
Currently I have two users in my table that I want to send email to, but when the stored procedure runs I got two emails for the last user in the table instead one for each user.
Hello all. I have got some wonderful help getting me to this point, although now I have run into an issue which I really can't understand. I have the following query, which should give me the records for the employee in the query, but for some reason I am getting all records.
SELECT EmpName, EmpNumber, EmpLevel, JobTask, WorkYear, Sum(tblEmpTime.Hours) AS SumOfHours FROM tblEmpTime WHERE EXISTS (SELECT EmpName, EmpNumber, Hours, EmpLevel, JobTask, WorkYear FROM tblEmpTime WHERE EmpName = 'varEmpName' AND WorkYear = 'varWorkYear') GROUP BY EmpName, JobTask, EmpNumber, EmpLevel, WorkYear
If I run just the subquery, the results are ok, but I need to sum the hours, so that is why I used the outer query. For some reason it seems that it is ignoring the results of the subquery.
The following seems to work in SQL Server 2005, but I'm getting theerror 'Incorrect syntax near xml' when I run it in SQL Server 2000.select a.accountid , (select street, city, state, zip from account bwhere a.accountid =b.accountid for xml auto, elements) as xmldatafrom account aThe idea is to return 2 columns:accountidxmldata (address as xml)Assuming the fields are correct, any ideas on what the problem might be?
So.. I'm trying to add up the number of wins and losses from a schedule of games and list them with their corresponding team name from another table.
Then I want to be able to sort by each teams number of wins. This is what I've got now, and it runs through without error, but it does not ORDER the list by "Wins"
strSQL = "Select *, ((SELECT Count(Win) FROM Game_Schedule WHERE Game_Schedule.T1_ID = standings.ID AND Win = true) + " & _ "(SELECT Count(Win) FROM Game_Schedule WHERE Game_Schedule.T2_ID = standings.ID AND Loss = true)) AS [Wins], " & _ "(SELECT Count(Loss) FROM Game_Schedule WHERE Game_Schedule.T1_ID = standings.ID AND Loss = true) + " & _ "(SELECT Count(Loss) FROM Game_Schedule WHERE Game_Schedule.T2_ID = standings.ID AND Win = true) AS [Losses], " & _ "(SELECT Count(Tie) FROM Game_Schedule WHERE Game_Schedule.T1_ID = standings.ID AND Tie = true OR Game_Schedule.T2_ID = standings.ID AND Tie = true) AS [Ties] FROM standings ORDER BY T_Tier, T_Name, Wins DESC"
Hi, I'm trying to run a stored proc:ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust=(SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)When I remove the SELECT @varCust= I get the correct return. With itin, it just appears to run but nothing comes up in the output window.PLEASE tell me where I'm going wrong. I'm using MSDE, although I don'tthink that should matter?Thanks, Kathy
Insert Into Table2 Select * From Table1 Where Column1Val = '4'
As you can see, I don't need any parameters so I havent configured any. Also, there should not be any result set so I shouldnt need to configure a resultset parameter.
Why is the above query failing with
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
I had a view in which I did something like this isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005. When I change the query to fld as 'alias' then it works ok in sql 2005 . why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
I'm trying to use the bcp utility to transfer data from an SQL Server table (CUSTOMERS) to a text file (test.txt).
Here is what I have: DECLARE @FileName varchar(50) SET @FileName = 'C: est.txt'
EXEC bcp BAirwaysDB..CUSTOMERS out @FileName -S<servername> -T
only I keep getting the error: Msg 102, Level 15, State 1, Line 4 Incorrect syntax near '.'.
and when running: bcp BAirwaysDB..CUSTOMERS out C: est.txt -S<servername> -T
on the command line I get: SQLState = 28000, NativeError = 18456 Error = [Microsoft][SQL Native Client][SQL Server]Login failed for user 'RIVERAMelanie'. SQLState = 42000, NativeError = 4060 Error = [Microsoft][SQL Native Client][SQL Server]Cannot open database "BAirways" requested by the login. The login failed.
Can you see where I'm going wrong with this? Any feedback would be really appreciated.
This is a subset question of one of my other threads, the gist is while using forms authentication, I am trying to enter additional information into another table on the same db as the aspnet_membership tables. I think I need an <asp:SqlDataSource> to do this because it is about the only thing left I haven't tried to get this code to work so any help is appreciated. Environment: sql server 2000, windows server 2003, asp.net 2.0, vb, no GUI<ASP:SqlDataSource id="addedInfo" ConnectionString="<%$ ConnectionStrings:SqlServerConnection %>" InsertCommand="INSERT INTO addInfo(username,email,company,firstname,lastname,phone) VALUES (@username,@email,@company,@firstname,@lastname,@phone)" runat="server" />looking over some of my books and online it says in the connectionStrings that it is supposed to be the database name that goes next to the : but when I try that I get an error that it is looking for the name of the connection string, so I enter the name of the connection string (as above) and nothing happens, which is basically the ongoing event with this whole problem, the form fields (username, email, password) that go into the aspnet_membership tables just fine, I don't have any problems with those, it is getting the additional information into another table that has been stalling me the whole time.So does this sqldatasource look right? Any help is appreciated.
Call me an idiot as I'm quite new to asp.net. I'm working through a book called 'ASP.NET Unleashed' where the chapter on how to create a database connection to an sql database on MSDE called 'pubs' is shown. Iv'e installed MSDE. When I try to run the example it says that the login or authentication has failed. Iv'e tried different things but I'm out of ideas. Another thing is that when I try to install sql server 2000 on my Win XP it first says something about this being the wrong OS or something like that. I can get past that but when I'm presented with 3 installation options 1.client 2. client and connectivity 3.connectivity I installed client because that's supposed to create a stand alone installation. However when I'm done installing the only new entry in the start->programs is client connectivity. Where is the Enterprise services that I'm supposed to be able to access according to the book? Is sql server 2000 compatible with XP and not just win 2000?
can somebody tell me whats wrong with this sp..................when i pass lname only or fname only it does not return any data, but when i passs both lname and fname it returns the correct data.....when i rearrange the structure to where it checks the lname only it works also but fname doesn't .........any help is greatlly appreciated
CREATE PROCEDURE [dbo].[temp_search] ( @lname varchar(50) = null, @fname varchar(50) = null, @date1 datetime = null, @date2 datetime = null) /*set @lname = null -- 'aaa'set @fname = null --'ddd'set @date1 = '2/25/2003'set @date2 = '9/30/2004'*/ as set nocount on if not @lname is null or @lname = '' and not @fname is null or @fname = ''begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname and temp_user_info.fname like @fnameendelse if not @lname is null or @lname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname end else if not @fname is null or @fname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.fname like @fname end else if not @date1 = null and not @date2 = null begin select cir_temp_user_info.*, dateTime1 FROM cir_temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 between @date1 and @date2 end else if not @date1 = null begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = cir_temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 like @date1 endGO
I am very new to SQL server and I'm using stored procedures for my program. So far I wrote one tonight, that works just fine. I haven't really written one before, but its kind of similar syntax since I know C++/C# and VB. My question is, even though this works for what I need it do, is it written correctly? Can you see any problems with it, or would you have done it differently? I want to make sure its done correctly, and it runs as fast as possible. Thanks! [pre] CREATE PROCEDURE CreateNewUser @UserID int out, @LoginID nvarchar(30), @Password nvarchar(30), @RegisterDate smalldatetime, @LoginIDExists nvarchar(30)AS /* Check to see if the loginID is already in use before attempting to save it. We MUST have a unique loginID for each user */ SELECT @LoginIDExists = loginID FROM users WHERE loginID = @LoginID /* If we pulled a value from the database, then the loginID already exists, return with error code 1 */ IF (@LoginIDExists = @LoginID) BEGIN SELECT 1 RETURN END ELSE BEGIN /* The loginID does not already exist, attemp to add the new user to the database. */ INSERT INTO users ( loginID, loginpassword, registerDate ) VALUES ( @LoginID, @Password, @RegisterDate ) /* Grab the UserID for the new user. */ SELECT @UserID = @@identity /* return with error code 0 */ SELECT 0 RETURN ENDGO [/pre]
I have a field called contact_id in a table. Datatype is integer and has an identity seed of 1 and an identity increment of 1. When new records are created, the increment sometimes skips numbers. (ex. 12,13,18,21). What's going on here? Am I losing records somewhere?
I have a field called contact_id in a table. Datatype is integer and has an identity seed of 1 and an identity increment of 1. When new records are created, the increment sometimes skips numbers. (ex. 12,13,18,21). There is absolutely no deletion of any kind going on. (i.e. My application (cold fusion) has no code whatsoever that is deleting records.) What's going on here? Am I losing records somewhere?
I am new to SQL Server 2005. I have tried to be a good student and learn on my own about designing the database. However, I am facing a blockage of getting data into the database. I want to verify I have setup the relationships correctly. Here is the tables.
1. A Manufacture has an Address. 2. A Manufacturer has one or more Distribution Points. 3. A Distribution Point has an Address.
The Manufacturer --> Address is a one-to-one relationship. The Distribution Point --> Address is a one-to-one relationship. The Manufacturer --> Distribution Point is a one-to-many relationship.
The manufacturer table has a FK to the address id (PK). The distribution table has a FK to the address id (PK). The distribution table has a FK to the Manufacturer id (PK). Address has several other FK, but not used in this scenario.
The INSERT and UPDATE Specification for the Delete Rule and Update Rule is set to "No Action" for the Manufacturer and Address tables. In the Distribution Point table, the relationship for the update rule involving the relationship with the Address and Manufacturer tables is set to CASCADE. What this tells me is SQL Server 2005 will update the table should changes occur in Address and Manufacturer table.
Is there anything else I can check to be sure the issue I am facing is NOT the deisgn of the database?
Does anybody know how to work with two (or more) databases in SQL Server 2005; or where that information can be obtained? I searched online, in BOL and asked in this forum but with no success.
information in this posting does not work; results in invalid object name (source database) and/or database does not exist (destination database) errors:
Of course, both databases exist and their names are valid. Both can be accessed individually thru SSMS and a VB app I am coding. The problem is when trying to work with both of them.
Any information on the subject of working with multiple datatabases and/or links to said subject would be appreciated.
