Hello all, I have a stored procedure with a parameter that I need to
use in a subquery, but my query doesn't work.
The stored procedure is some as:
CREATE PROCEDURE dbo.Test
@valore varchar(100)
AS
SELECT * FROM TABELLA
WHERE i_campoID IN (@valore)
ORDER BY i_campoID DESC
GO
How can I do, without using EXECUTE command?
I am using an OLE DB Source with SQL command for the data access mode. I defined parameters, then added a complex query with subqueries. It seems like the parameters for a query are not being filled correctly (because I am getting too many rows returned). At one point I saw an error message the said something to the effect that the parameters would be ignored when there was a subquery in the SQL.
Can anyone shed some light on this?
Thanks,
Laurence
I don't know how to pass parameters required (dates) to a query1, if I'm using a subquery (query2) which is using the results of query1, but I'm not showing that field on that subquery (query2)
Example
table1
id - autonumeric
id_user - id from user
dates - date of register
table2
id - user id
name - user name
query1
SELECT Table1.id_user, Count(Table1.id_user) AS CuentaDeid_user
FROM Table1
WHERE (((Table1.datess) Between [begining] And [ending]))
GROUP BY Table1.id_user
ORDER BY Table1.id_user;
subquery (query2)
SELECT query1.id_user, query1.CuentaDeid_user, Table2.name
FROM query1 LEFT JOIN Table2 ON query1.id_user = Table2.id;
This is just an example, the think is that I want to know that if it's possible to pass the parameters requested in query1 from the SQL of the subquery (query2)?
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
View 1 Replies View RelatedI am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
View 3 Replies View RelatedI am getting an error as
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
WHERE EmployeeDetails.Empid=1
PLEASE HELP.................
Hi,
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar,
RDR1.U_Variety,
(SELECT OITM.U_Variety
FROM OWOR INNER JOIN
WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN
OITM INNER JOIN
OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode
WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity,
OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet,
OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode
FROM OWOR AS t0 INNER JOIN
ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN
RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN
OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode
WHERE (t0.Status <> 'L')
Thanks
Jacquues
Hi guys,
A have a problem that I need understand.... I have 2 server with the same configuration...
SERVER01:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
********************************
SERVER02:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
Any idea WHY?
SELECT dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao ds_tipo_transacao_movimento ,
dbo.opf_header_operacao.ds_tipo_transacao ds_tipo_transacao_header,
'SD' ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente,
0 vl_entrada_compra_ctro ,0 vl_entrada_compra_premio,
0 vl_entrada_venda_ctro , 0 vl_entrada_venda_premio,
0 vl_saida_compra_ctro, 0 vl_saida_compra_premio,
0 vl_saida_venda_ctro, 0 vl_saida_venda_premio,
0 vl_lucro , 0 vl_prejuizo, 0 vl_naoexec_contrato,
0 vl_naoexec_premio,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_ganho) vl_aprop_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_perda) vl_aprop_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_ganho) vl_rever_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_perda) vl_rever_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_irrf) vl_irrf
FROM dbo.opf_saldo_ctb_opc_flx,
dbo.opf_header_operacao ,
dbo.opf_movimento_operacao
WHERE dbo.opf_saldo_ctb_opc_flx.dt_saldo = '6-29-2007 0:0:0.000'
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_saldo_ctb_opc_flx.no_contrato )
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_movimento_operacao.no_contrato )
and ( dbo.opf_movimento_operacao.dt_pregao = (select (o.dt_pregao) from dbo.opf_movimento_operacao o
where o.no_contrato = dbo.opf_movimento_operacao.no_contrato and o.dt_pregao <='6-28-2007 0:0:0.000' ) )
and (dbo.opf_saldo_ctb_opc_flx.ic_tipo_saldo = 'S')
group by dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao,
dbo.opf_header_operacao.ds_tipo_transacao ,
ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente
Thanks
Nilton Pinheiro
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedHi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???
Hello:
I just recently bumped into this problem and I think I know what's causing it. This is the setup:
Report Parameters: FromDate, ToDate, DivisionalOffice, Manager, SalesRep
dsCalendarEvents Parameters: FromDate.Value, ToDate.Value, DivisionalOffice.Value,
dsDivisions Parameters: N/A
dsManager Parameters: DivisionalOffice.Value
dsSalesRep: DivisionalOffice.Label
When I query the ReportServices WS and scan the parameter dependencies for SalesRep it says there are four dependencies: FromDate, ToDate, DivisionalOffice and Manager!!!
If I change "dsSalesRep" to use "DivisionalOffice.Value" the ReportingServices WS parameter dependency scan returns only one dependency for "SalesRep" parameter!!!( This is the correct behavior )
Has anybody seen this behavior and more importantly, is there a work around?
Regards,
Hi and thanks in advance for the help.
Here's what I'm trying to do, I need to select all the rows from one table, and only 1 row from a related table.
Table setup
Table1:
Field 1 = PK Ident
Table2:
Field1 = FK ident
I need to select all the rows that exist in Table 1, and I need 1 row out of table2 where Field1 is equal to the Table1.Field1 value (multiple records in table2 will exist with that same value.) I need the top row using a SELECT TOP 1
I was trying to do this with a subquery, but SQL is throwing an error asking me for EXISTS statments.
I have the following as a subquery in a larger stored procedure:
SELECT P.ProductId, P.ProductName, P.Category , (SELECT MAX(O.Orderdate) FROM dbo.[Orders] AS O WHERE O.ProductId=P.ProductId) As MostRecentOrder, ROW_NUMBER() OVER (ORDER BY MostRecentOrder DESC) AS RowNumber FROM dbo.[Products] AS P WHERE P.Category=@category
@category is an input parameter
I am getting an error pointing to the Order By clause stating that "MostRecentOrder" is an invalid column name. If I sort by P.ProductId or P.ProductName, it works fine. Any ideas?
Thanks
Hi All, This Subquery is kicking my ***. Maybe you can help. I want to query a query.I have the user enter a phrase from a textbox, then I want to group the results by element_label. This is what i have so far, but its not working. SELECT Element_ID, Element_Label, Element_Name, Question_ID, Question_Label, Question_Level, Question_Text, RelatedSRR
FROM qryforaspx
WHERE ([Question_Text] LIKE '%' + ? + '%')
IN
SELECT Element_Label FROM Description
Group by
Element_label Thanks,
Has anyone seen where subqueries collapse into a sum??? I have code like the following, which has been running fine for over a year:UPDATE Reports..DataStats SET Vendors_Cnt = (SELECT COUNT(*) FROM vVendors__AllRecords), Vendors_Audit_Cnt = (SELECT COUNT(*) FROM vVendors_InvAudit), Vendors_Rpts_Cnt = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvUnused = (SELECT COUNT(*) FROM vVendors_InvUnused),Vendors_InvOne = (SELECT COUNT(*) FROM vVendors_InvOne), Vendors_InvMulti = (SELECT COUNT(*) FROM vVendors_InvMulti), Vendors_InvUnpaid = (SELECT COUNT(*) FROM vVendors_InvUnpaid), Vendors_InvNewer = (SELECT COUNT(*) FROM vVendors_InvNewer), Vendors_Inv12mo = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvPrior = (SELECT COUNT(*) FROM vVendors_InvPrior), Vendors_InvSkipYear = (SELECT COUNT(*) FROM vVendors_InvSkipYear), Vendors_Known = (SELECT COUNT(*) FROM vVendors_Known), Vendors_Orphaned = (SELECT COUNT(*) FROM vVendors_Orphaned), Vendors_Active = (SELECT COUNT(*) FROM vVendors_Active), Vendors_Inactive = (SELECT COUNT(*) FROM vVendors_Inactive), Vendors_Excluded = (SELECT COUNT(*) FROM vVendors_Excluded)WHERE (AuditName = @AuditName)But now it is generating overflows....and is not equivalent to (ignoring the obvious UPDATE vs. return differences for illustration):SELECT COUNT(*) FROM vVendors__AllRecordsSELECT COUNT(*) FROM vVendors_InvAuditSELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvUnusedSELECT COUNT(*) FROM vVendors_InvOneSELECT COUNT(*) FROM vVendors_InvMultiSELECT COUNT(*) FROM vVendors_InvUnpaid SELECT COUNT(*) FROM vVendors_InvNewer SELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvPrior SELECT COUNT(*) FROM vVendors_InvSkipYear SELECT COUNT(*) FROM vVendors_KnownSELECT COUNT(*) FROM vVendors_OrphanedSELECT COUNT(*) FROM vVendors_Active SELECT COUNT(*) FROM vVendors_Inactive SELECT COUNT(*) FROM vVendors_ExcludedThis appears to have started around the beginning of May. Anyone else suffer after patches?
View 5 Replies View Relatedi have a table which i`m having difficulty setting up a subquery on.
cmpcode code grpcode
------------ --------- ------------
CORP 96020 01ADMIN
HON 96020 01ADMIN
LON 96020 04FOREIGN
LON 96020 01DIRECT
LON 96020 03ELLIOTT
LON 96020 02ACTIVE
NEW 96020 02INACTIVE
NEW 96020 01ADMIN
NEW 96020 03HOLECEK
SIN 96020 01ADMIN
what i would like to do is pull in only `codes` with a grpcode in (02active, 01direct). in the example above, i would only want the `lon` cmpcode to appear, since it`s both 01direct and 02active. since the grpcodes are on different lines, i`m not sure how to accomplish this. also, my key is cmpcode, code - not just code. here`s how i`ve been attempting to do it:
select
cmpcode,
code,
grpcode
from oas_grplist
where
elmlevel = 5 and
grpcode = `02ACTIVE` and
code in(select code from coda..oas_grplist where grpcode = `01direct`).
the problem with this is the subquery join is only based on joining code, and cmpcode needs to be included in the join.
any ideas?
thanks in advance, André
I have a SELECT statement with a subquery. I use an alias as I add the results of the subquery to the dataset. I then try to use the alias in the WHERE clause of the SELECT statement. I get an “Invalid column name “ message with this code:
select i.id as itemid,
(select top 1 ca2.itemid from itemassign ca2
inner join account a2 on ca2.accountid=a2.id
where a2.customerid=c.id and ca2.itemid=i.id)
as iaid
from item i
inner join customer c on i.customerid=c.id
where i.customerid=1 and iaid is null
order by i.id DESC
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'iaid'.
If I run the statement without the and condition in the WHERE clause it returns a valid result.
Any input on this will be very appreciated!
Thank you,
IRead
Sorry about my last post, it seemed to generate nothing but confusion. Hopefully I will explain the problem better this time.
Here are my tables with sample data:
Code:
abmtransmitter table:
Transmitter ID | Site_name | last_test_date | last_failed_test_date
A0001 Site01 2007-06-12 2007-06-10
A0002 Site02 2007-05-23 2007-06-06
A0003 Site03 2007-06-05 2007-06-12
A0004 Site04 2007-01-18 2007-05-18
AbmSignal Table:
Transmitter | Signal_id | Signal_date
A0001 trouble 2007-06-09
A0001 fail test 2007-06-10
A0001 test 2007-06-11
A0001 test 2007-06-12
A0002 test 2007-05-23
A0002 fail test 2007-05-30
A0002 fail test 2007-06-06
A0003 test 2007-06-05
A0003 fail test 2007-06-12
A0004 test 2007-01-18
A0004 fail test 2007-02-18
A0004 fail test 2007-03-18
A0004 fail test 2007-04-18
A0004 fail test 2007-05-18
I am trying to get a list of transmitters that have failed to send their scheduled communication test.
I only want a list of the transmitters who have failed two communications tests since the last successful test.
In the above data, the list would result with A0002 and A0004. A0001 passed it's most recent test, and A0003 has only failed one time since it's last successful test.
The following query does not look correct to me, but it does give me the results that *look* correct.
If it works, why does it work because I don't understand how the query on abmtransmitter is passing the value last_test_date to the subquery.
Or is this just a fluke and my result set looks correct but may not be?
'
Code:
Select Transmitter_id, Site_name from abmtransmitter where transmitter_id in
(select transmitter from abmsignal where signal_id = 'fail test' and signal_date > last_test_date
group by transmitter having count(transmitter) > 1) and last_failed_test_date > last_test_date Order by site_name
I have a subquery where I get 2 rows back which cause issues (since I can't return more then one). I am using this subquery in my function and I can't use a temp table in order to select the correct value. what other options do I have . My subquery returns 2 dates and I need to return from my function the max date.
View 1 Replies View RelatedHi
Im using sql server 2000 and I have sql statement that needs to do a LIKE statement from values from another table. An example would be the below
select Name, PostCode from Customers
where Post LIKE (select PartialPostCode + '%' from areas where area_arid = '123')
However if the above sub query returns more than one row then it will error. So I thought I would create a function to return a string such as the below and put it into vvariable
@strPostCodesLike = 'PostCode LIKE 'WS1 %' OR PostCode LIKE 'WS2 %'
And tried to execute the following SQL statement
select Name, PostCode from Customers WHERE @strPostCodesLike
However the above does not work, as I would need to use dynamic sql to get it to work. I cant use dynamic sql unfortunately.
Any help would be much appreciated
Many thanks in advance
I am new to sql and i was reading about subquery and i think its the right tool for what i want to achieve
i have two tables
Products table, OrdersLine table
Products Table
ProdSku
ProdName
QOH
Cost
********
OrdersLine Table
OrderNum
ProdSku
Qty
I want to get the product Sku, Name, QOH, Cost and the Sum(Qty) from OrdersLine
this is what i have tried
SELECT dbo.Products.ProdSku AS Sku, dbo.OrdersLine.Qty AS Expr1
FROM dbo.Products INNER JOIN
dbo.OrdersLine ON dbo.Products.ProdSku = dbo.OrdersLine.ProdSku
WHERE (dbo.Products.ProdSku = '122345')
GROUP BY dbo.Products.ProdSku
please help!
I am cofuse with subquery.HOW does subquery work. the inner or outer query exicute first. what are different type of sub query. plz give example. i am more confuse with exits subquery
View 3 Replies View RelatedI have this subquery that I'm trying to get info from the two seperate tables to show up, but I only get one or the other.
-- This report is for the DC. This report is to look at what items
-- come in a kit and what the inventory levels looks like at the
-- time the report is run. 07/18/06 mjg
SELECT I.ItemID, D.ShortDesc, KI.ItemID, KD.ShortDesc
FROM timKitCompList KL
INNER JOIN timItem I ON KL.CompItemKey = I.ItemKey
INNER JOIN timitemdescription D ON I.ItemKey = D.ItemKey
WHERE EXISTS
(SELECT KI.ItemID AS KitItemNo, KD.ShortDesc AS KitItemDesc
FROM timKit K
INNER JOIN timItem KI ON K.KitItemKey = KI.ItemKey
INNER JOIN timitemdescription KD ON KI.ItemKey = KD.ItemKey)
Here are the error messages that I get:
Server: Msg 107, Level 16, State 2, Line 4
The column prefix 'KI' does not match with a table name or alias name used in the query.
Server: Msg 107, Level 16, State 1, Line 4
The column prefix 'KD' does not match with a table name or alias name used in the query.
Hi guys!
I need help. I have two tables (customers & orders). I want to build a query that lists all the customers who haven't placed an order in over a year. Below are the simplified tables (i've removed other fields that I don't think are relevant to this query). Do I need to do a subquery or something? Please help!
TABLES:
CUSTOMERS
custid (unique autonumber)
ORDERS
custid (int)
orderdate (date)
Hello,
I've the next query but he answer
"Subqueries are not allowed in this context. Only scalar expressions are allowed. "
INSERT INTO
tbl_Tickets (
vld_Onderwerp,
vld_Omschrijving,
vld_Aangemaakt,
vld_Type,
vld_Apparaat,
vld_Klant,
vld_Gebruiker
)
VALUES (
'Test ',
'hoi',
'7/9/2007 1:41:15 PM',
(
SELECT
fld_id
FROM
tbl_storing_types
WHERE
fld_Naam = 'Storing'
),
'54684 ',
'1',
'1'
)
I searched much fora but i can't find a clear solution.
Who can help me?
Have a table:
ID M1 M2 M3 M4 M5 M6
-------------------------------------
1 A1 B3 B4 D5
...
...
...
For any record, I am trying to pull out only the values in 6 specific columns (M1-M6) which correspond to a variable. If the value in any column equals the varaible, it should be included, otherwise it shouldn't
For example:
If x = "B" and ID = 1
I want to pull the record for ID #1 and return the two columns M2 and M3, because Left(ColumnX,1) = x (which has the value of "B") for both those columns. Columns M1, M4, M5, M6 would not be returned
I tried to code a subquery, but it didn't work
Thanks for any help
Dan B
Hi there,
1. Assuming I have below table:
Projectid,Dept,Budgeted,Approved,Status
A1,Audit,Yes, No, Started
B1,HR,No, Yes, Started
C1,IT,Yes, Yes, Not Started
D1,Audit,Yes, Yes, Dropped
2. Below are the 2 queries created
select dept, count(projectid) from table where budgeted = 'yes' group by dept
select dept, count(projectid) from table where budgeted = 'yes' and (approved = 'yes' or status = 'started') group by dept
3. How to join the above 2 queries for me to get the following result
Dept, Budgeted, Exp1
Audit, 2, 1
IT, 1, 1
HR, 0, 0
Greetings, I am working on a SQL View - I previously posted in this forum and thought I had fixed my problem. Turns out that my view no longer works because I have multiple records where I want only one record.
I am working with 4 tables - here are the tables and my sample data:
USE YOURDATABASE
GO
CREATE TABLE ZTECSOP60100
(
SOPNUMBE char(21) NOT NULL,
PONUMBER char(17) NOT NULL,
ORD int NOT NULL,
RCPTCOST numeric (19,5) NOT NULL,
QTYONPO numeric (19,5) NOT NULL,
QTYRECVD numeric (19,5) NOT NULL
)
INSERT INTO ZTECSOP60100
values ('ORD001', 'PO2074', '16384', '0.00000', '0.00000', '1.00000')
INSERT INTO ZTECSOP60100
values ('ORD1003', 'PO2079', '16384', '425.00000', '0.00000', '5.00000')
USE YOURDATABASE
CREATE TABLE ZTECPOP10110
(PONUMBER char(17) NOT NULL,
ITEMNMBR char (31) NOT NULL,
ITEMDESC char (101) NOT NULL,
ORD int NOT NULL)
GO
INSERT INTO ZTECPOP10110
values ('PO2074', 'SERVICE1', 'Service item', '16384')
INSERT INTO ZTECPOP10110
values ('PO2079', 'SERVICE1', 'Service item', '16384')
USE YOURDATABASE
CREATE TABLE ZTECSOP30200
(
SOPNUMBE char(21) NOT NULL,
ORIGNUMBE char (21) NOT NULL,
SOPTYPE smallint NOT NULL,
)
GO
INSERT INTO ZTECSOP30200
values ('ORD001', '', '2')
INSERT INTO ZTECSOP30200
values ('INV001', 'ORD001', '3')
INSERT INTO ZTECSOP30200
values ('ORD1003', '', '2')
INSERT INTO ZTECSOP30200
values ('INV010', 'ORD1003', '3')
USE YOURDATABASE
CREATE TABLE ZTEC30310
(
PONUMBER char (17) NOT NULL,
UNITCOST numeric (19,5) NOT NULL,
TRXSORCE char (13) NOT NULL,
UMQTYINB numeric (19,5) NOT NULL,
EXTDCOST numeric (19,5) NOT NULL
)
GO
USE YOURDATABASE
INSERT INTO ZTEC30310
values ('PO2074', '125', 'RECVG00000001', '1', '125')
USE RELIA
INSERT INTO ZTEC30310
values ('PO2074', '125', 'POIVC00000001', '1', '125')
INSERT INTO ZTEC30310
values ('PO2079', '100', 'POIVC00000005', '1', '300')
INSERT INTO ZTEC30310
values ('PO2079', '75', 'RECVG00000007', '1', '375')
INSERT INTO ZTEC30310
values ('PO2079', '85', 'POIVC00000004', '1', '170')
Here is my VIEW -
CREATE view [dbo].[_tec_SOP_POP_link] as
select ZTECSOP60100.SOPNUMBE as SOP_ORDER_NUMBER,
ZTECSOP60100.PONUMBER as PONUMBER,
ZTECSOP60100.QTYRECVD as QtyReceivedSoFar,
ZTECSOP30200.sopnumbe as SOP_INV_NUMBER,
ZTECPOP10110.ITEMNMBR as ITEM_NUMBER,
ZTECPOP10110.ITEMDESC as itemdescription,
CASE WHEN ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.TRXSORCE like 'RECVG%'
then ZTEC30310.UNITCOST else '0' end as ReceivedCost,
CASE WHEN ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.TRXSORCE like 'POIVC%'
then ZTEC30310.UNITCOST else '0' end as VENDORINVOICE_Cost,
Sum (case when ZTEC30310.ponumber = ZTECsop60100.ponumber AND
ZTEC30310.trxsorce like 'POIVC%' then ZTEC30310.EXTDCOST/ZTEC30310.UNITCOST else 0 end) as QTYINVOICEDMATCHED,
Sum (case when ZTEC30310.ponumber = ZTECsop60100.ponumber AND
ZTEC30310.trxsorce like 'POIVC%' then ZTEC30310.extdcost else 0 end) as TOTALDOLLARSINVOICEDMATCHED
from ZTECsop60100 left outer join ZTECsop30200 on ZTECsop60100.sopnumbe = ZTECsop30200.ORIGNUMBE AND ZTECsop30200.soptype = 3
left outer join ZTECPOP10110 on ZTECSOP60100.PONUMBER = ZTECPOP10110.PONUMBER
left outer join ZTEC30310 on ZTECsop60100.ponumber = ZTEC30310.ponumber
where ZTECSOP60100.ORD = ZTECPOP10110.ORD
GROUP BY ZTECSOP60100.SOPNUMBE, ZTECSOP60100.QTYRECVD, ZTECSOP30200.sopnumbe, ZTECSOP60100.PONUMBER, ZTECSOP60100.QTYONPO,
ZTEC30310.TRXSORCE, ZTECPOP10110.ITEMNMBR, ZTECPOP10110.ITEMDESC, ZTEC30310.UNITCOST, ZTEC30310.umqtyinb, ZTEC30310.ponumber
GO
This View returns 5 Records when I want only 2 records.
I need 1 record for each SOP_ORDER_NUMBER AND PONUMBER combination.
Record 1
SOP_ORDER_NUMBER = 'ORD001'
PONUMBER = 'PO2074'
QtyReceivedSofar = '1'
SOP_INV_NUMBER = 'INV001'
ITEM_NUMBER = 'SERVICE1'
itemdescription = 'Service item'
ReceivedCost = '125'
VENDORINVOICED_COST = '125'
QTYINVOICEDMATCHED = '1'
TOTALDOLLARSINVOICEDMATCHED = '125'
Record 2
SOP_ORDER_NUMBER = 'ORD1003'
PONUMBER = 'PO2079'
QtyReceivedSofar = '5'
SOP_INV_NUMBER = 'INV010'
ITEM_NUMBER = 'SERVICE1'
itemdescription = 'Service item'
ReceivedCost = '75'
VENDORINVOICED_COST = '94' (calculated by taking TOTALDOLLARSINVOICEDMATCHED/QTYINVOICEDMATCHED)
QTYINVOICEDMATCHED = '5'
TOTALDOLLARSINVOICEDMATCHED = '470'
The unanticpated dilemna was multiple records in ZTEC30310 for TRXSORCE of POIVC or RECVG - I basically need to sum the records and return one record.
I attempted to fix by adding sum within my case statements but I get the SQL error message
'Cannot perform an aggregate function on an expression containing an aggregate or a subquery'
Any assistance would be appreciated......many thanks in advance...
Hi, I've read through quite a few of the other new sql user questions and saw similar questions, but nothing that quite fits.
I use a transit database. The tables that I need to query for this question are Clients, Booking, Bookinglegs
I need to return results on trip information where the creation date
was the same day as the trip date (ldate) However, I also need to show trips taken by the clients whose trips made the above criteria, but also had other trips the same day.
This query produces the results I need for the trips created the same day as the trip day:
Select c.clientid, b.ldate, b.credate, PU.reqtime, DO.reqlate
From Clients C, Booking B, Bookinglegs PU, Bookinglegs DO
Where c.clientid=b.clientid
AND b.bookingid=PU.bookingid
AND PU.legnum=0
AND DO.legnum=1
AND b.credate=b.ldate
I tried writing a case expression so that the results of this query would return a value of 'SAME DAY' and then adding an identical union query to it, except with the AND b.credate<b.ldate with a case expression that returned a value of 'Prior Booking'...this worked, however, I get every single booking for that day from the second query. Is there any way to do a subquery or a different statement that would produce results that were only contained in the first statement? I tried outer joins as well, but I'm really at a loss...
Thanks!
Hi Team:
SELECT Distinct a.group_code, a.group_name + '-'+ a.group_note As full_name ,
b.station_nbr, b.beg_eff_date, b.end_eff_date,
Round( e.C02_pct,3)As C02_pct, e.sample_date, d.station_name
from group_detail a
Inner Join station_group b on a.group_code = b.group_code
Inner Join station_type c on b.station_nbr = c.station_nbr
Inner JOIN station d ON c.station_nbr = d.station_nbr
Inner JOIN gas_analysis e ON d.station_nbr = e.station_nbr
Where (a.group_type = 'NPN')and( b.end_eff_date >=@sampledateBegin)and ( (c.type_code = 'WHM')or ( c.type_code = 'CRP'))
and (e.sample_date Between @sampledateBegin and @sampledateEnd )
and e.seq_nbr =
(select max(x.seq_nbr)
From gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date )
and e.C02_pct =
(Select max(x.C02_pct)
From gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date
and x.seq_nbr= e.seq_nbr)
order by a.group_code
Group station_nbr Beg_date end_date C02 sample_date
0004 D01G000819 2007-09-01 3000-12-31 0.40 2007-10-02
0004 D01G000819 2007-09-01 3000-12-31 2.49 2007-10-09
I am trying to obtain the highest C02 in this case 2.49 but before getting the highest C02 it needs to meet the Select MAX seq_nbr within a given date. In other words I am trying to write a Subquery that first will obtain the MAX seq_nbr within a given date and based on the records pick the higest C02.
I appreciate the help. I hope my scope help understanding what I am trying to achieve.
I am trying to get the % of resolved for every calltype based on an input dates. Here is my table:
Table: Win4
SessionDate Calltype Status
---------------------------------------
1/2/2008 Email Resolved
1/3/2008 Email Unresolved
1/4/2008 Connectivity Resolved
1/5/2008 Connectivity Unresolved
1/6/2008 Connectivity Resolved
1/7/2008 General Resolved
1/8/2008 General Resolved
1/9/2008 General Unresolved
Here's my desired result given the parameter dates 1/2/08 to 1/9/2008:
Calltype #Count #Resolved
---------------------------------------
Email 2 1
Connectivity 3 2
General 3 1
Here's my code:
SELECT Calltype, count(Calltype) as #Count
FROM dbo.WIN4
Where Sessiondate >= '1/2/2008' and Sessiondate <= '1/9/2008'
Group by Calltype
Then problem is that I do not know how to count all the RESOLVED with alias #Resolved.
I appreciate any help or who could write the code for me.
Thanks!
Dennis S.