Subquery Returns More Than One Value
Oct 14, 2004
Hi folks,
I have a problem where my subquery is returning two values and I need it to return only one. I believe it is doing this because of the group by DocType clause as there are two DocTypes.
Is there anyway I can sum these values in the subquery, to return only one value. This way the query should run ok.
Thanks for any help you might be able to give,
robinsql
SELECT OCRD.Cardcode,
OCRD.cardname,
@YearStart AS YearStart,
@YearEnd AS YearEnd,
@PeriodStart AS PeriodStart,
@PeriodEnd AS PeriodEnd,
OCRD.County,
(SELECT CASE WHEN OINV.DocType = 'I' AND SUM(INV1.Quantity) <>0 THEN COALESCE(SUM(INV1.Price * INV1.Quantity), 0) ELSE COALESCE(SUM(INV1.Price), 0) END FROM INV1, OINV WHERE INV1.DocEntry = OINV.DocEntry AND OINV.CardCode = OCRD.CardCode AND OINV.DocDate >= @YearStart AND OINV.DocDate <= @YearEnd GROUP BY OINV.DocType) AS YTDInvoice,
FROM
OCRD, OINV
WHERE
CardType='C'
View 2 Replies
ADVERTISEMENT
Aug 3, 2007
how do i go about testing if my subquery returns a row, it should only return one row or none at all, here's what i've got so far
if exists (Select *
from roomBookings
where bookingID = 1 AND departureDate = @pPrevRowDate)
begin
end
thanks
View 1 Replies
View Related
Nov 13, 2014
SQL (using 2012) .I'm trying to create some stored procedures that calculate stats needed for item response theory and test scoring (things like reliability, correlation, etc.). I'm writing a procedure that's aimed at splitting a test in half (first half of the items and second half of the items) and calculating each individual (TestID) score for each half. I can insert the first half of the test, but end up getting an error stating that the subquery returned more than one value. I know it's being caused by the group by clause, but if I remove it I end up with a total count of the items answered correctly, but it's necessary for me to link it batch to the TestID (so each row should have a BatchID [same for all at the moment], a unique TestId, a corresponding FirstHalfScore and a corresponding SecondHalfScore for each testID).
Insert into SplitHalfTestScores (BatchId, TestID, FirstHalfScore)
(Select distinct 10001 as BatchId, irt.TestID, count(*) as FirstHalfScore
From irt_TestItems irt where batchID=10001 and ItemId <=40 and TestId = irt.TestId and AnsweredCorrectly = 1 group by TestId)
Update SplitHalfTestScores
Set SecondHalfScore = (Select count(*)
From irt_TestItems irt where BatchId = 10001 and TestId = irt.TestId and irt.ItemId > 40 and AnsweredCorrectly = 1
group by TestId)
View 1 Replies
View Related
Sep 21, 2006
Hello,
I'm trying to update column based upon the results of a subquery. I'm getting the error that my Subquery returns more than one result. I've tried adding the EXISTS or IN keywords and cannot get the syntax right. I can't find any examples of how to write this with an Update query.
Here's my query:
UPDATE temp_UpdateRemainingHours
SET UsedHours =
(SELECT dbo.vw_SumEnteredHours_byCHARGE_CD.SumEnteredHours, dbo.vw_SumEnteredHours_byCHARGE_CD.CHARGE_CD
FROM dbo.vw_SumEnteredHours_byCHARGE_CD INNER JOIN
dbo.temp_UpdateRemainingHours ON
dbo.vw_SumEnteredHours_byCHARGE_CD.CHARGE_CD = dbo.temp_UpdateRemainingHours.CHARGE_CD)
FROM dbo.vw_SumEnteredHours_byCHARGE_CD, temp_UpdateRemainingHours
WHERE
dbo.vw_SumEnteredHours_byCHARGE_CD.CHARGE_CD = dbo.temp_UpdateRemainingHours.CHARGE_CD
;
View 5 Replies
View Related
Oct 6, 2006
Hi People,
I am having a table which has some 10 cols, only one column had all Nulls. DB-SQL2K5
I am now writing a query like
Update Test1
set Id =
(Select t2.Id from
Test2 t2, Test1 t1
where
t2.Name = t1.Name)
as likely this query is faling as the sub query is retuning more than a row. What is the best method to achive my requirement?
Thanks
View 7 Replies
View Related
Mar 25, 2015
I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100
SELECT * FROM Customer WHERE
CountyId IN
(
SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId)
THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?
View 4 Replies
View Related
Apr 26, 2008
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
View 1 Replies
View Related
Jul 20, 2005
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
View 3 Replies
View Related
Mar 6, 2008
I am getting an error as
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
WHERE EmployeeDetails.Empid=1
PLEASE HELP.................
View 1 Replies
View Related
May 14, 2008
Hi,
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar,
RDR1.U_Variety,
(SELECT OITM.U_Variety
FROM OWOR INNER JOIN
WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN
OITM INNER JOIN
OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode
WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity,
OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet,
OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode
FROM OWOR AS t0 INNER JOIN
ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN
RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN
OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode
WHERE (t0.Status <> 'L')
Thanks
Jacquues
View 4 Replies
View Related
Jul 19, 2007
Hi guys,
A have a problem that I need understand.... I have 2 server with the same configuration...
SERVER01:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
********************************
SERVER02:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
Any idea WHY?
SELECT dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao ds_tipo_transacao_movimento ,
dbo.opf_header_operacao.ds_tipo_transacao ds_tipo_transacao_header,
'SD' ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente,
0 vl_entrada_compra_ctro ,0 vl_entrada_compra_premio,
0 vl_entrada_venda_ctro , 0 vl_entrada_venda_premio,
0 vl_saida_compra_ctro, 0 vl_saida_compra_premio,
0 vl_saida_venda_ctro, 0 vl_saida_venda_premio,
0 vl_lucro , 0 vl_prejuizo, 0 vl_naoexec_contrato,
0 vl_naoexec_premio,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_ganho) vl_aprop_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_perda) vl_aprop_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_ganho) vl_rever_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_perda) vl_rever_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_irrf) vl_irrf
FROM dbo.opf_saldo_ctb_opc_flx,
dbo.opf_header_operacao ,
dbo.opf_movimento_operacao
WHERE dbo.opf_saldo_ctb_opc_flx.dt_saldo = '6-29-2007 0:0:0.000'
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_saldo_ctb_opc_flx.no_contrato )
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_movimento_operacao.no_contrato )
and ( dbo.opf_movimento_operacao.dt_pregao = (select (o.dt_pregao) from dbo.opf_movimento_operacao o
where o.no_contrato = dbo.opf_movimento_operacao.no_contrato and o.dt_pregao <='6-28-2007 0:0:0.000' ) )
and (dbo.opf_saldo_ctb_opc_flx.ic_tipo_saldo = 'S')
group by dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao,
dbo.opf_header_operacao.ds_tipo_transacao ,
ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente
Thanks
Nilton Pinheiro
View 9 Replies
View Related
Jul 6, 2014
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
View 6 Replies
View Related
Jul 23, 2005
Grrr!I'm trying to run a script:print 'Declaring cursor'declare cInv cursor forward_only static forselectdistinctinv.company,inv.contact,inv.address1,inv.city,inv.state,inv.postalcode,inv.cmcompanyidfromdedupe.dbo.ln_invoice as invleft joindedupe.dbo.customerid as cidondbo.fnCleanString(inv.company) = cid.searchcowhere((inv.customerid is nulland cid.searchco is null)and (inv.date >= '01/01/2003' or (inv.date < '01/01/2003' andinv.outstanding > 0.01))and not inv.company is null)print 'Cursor declared'declare@contact varchar(75),@company varchar(50),@address1 varchar(75),@city varchar(30),@state varchar(20),@zip varchar(10),@cmcompanyid varchar(32),@iCount int,@FetchString varchar(512)open cInvprint 'cursor opened'fetch cInv into@company,@contact,@address1,@city,@state,@zip,@cmc ompanyidprint 'Cursor fetched @@Cursor_rows = ' + cast(@@cursor_rows asvarchar(5))All the prints are there to help me figure out what's going on!When I get to the Print 'Cursor fetched @@cursor_rows....the value is 0 and the script skips down to the close and deallocate.BUT, if I just highlight the Select...When section, I get over 2,000rows. What am I missing?Thanks.
View 6 Replies
View Related
Dec 16, 2004
CREATE PROCEDURE UpdateAccount
(
@AccountID int,
@EmailAddress varchar(255),
@Password varchar(16)
)
AS
DECLARE @actualPassword varchar(16)
SELECT @actualPassword = Password
FROM Account WHERE AccountID = @AccountID
If Exists( SELECT EmailAddress FROM Account
WHERE EmailAddress = @EmailAddress )
RETURN -1
ELSE IF @Password <> @actualPassword
RETURN - 2
ELSE
UPDATE Account
SET
EmailAddress = @EmailAddress,
Password = @Password
WHERE AccountID = @AccountID
GO
View 2 Replies
View Related
Aug 11, 2006
Whats wrong with the following code,its compiling but returning only first memberid. i want all memberids to be returned
DECLARE @memberList VARCHAR(4000),@hDoc INT
SET @memberList = '<MemberList><MemberID>7136</MemberID><MemberID>7137</MemberID><MemberID>7138</MemberID></MemberList>'exec sp_xml_preparedocument @hDoc OUTPUT, @memberListSELECT MemberID FROM OPENXML (@hdoc, 'MemberList', 2) WITH (MemberID BIGINT)
EXEC sp_xml_removedocument @hDoc
View 1 Replies
View Related
Feb 26, 2007
@Names is a query string passed in, I need to count the number of records as a result of the below query/
Dim test As String
Dim sqlConnection3 As New SqlConnection("data Source=EQ-520-WEBSQLEXPRESS;Initial Catalog=CRDB.MDF;Integrated Security=True")
Dim cmd As New SqlCommand
Dim returnValue As Object
cmd.CommandText = "SELECT COUNT(ReqID) AS Expr1, LineManager FROM TblReqMain GROUP BY LineManager HAVING (LineManager = @Names)"
cmd.CommandType = Data.CommandType.Text
cmd.Connection = sqlConnection3
cmd.Parameters.Add("@Names", Data.SqlDbType.NVarChar)
sqlConnection3.Open()
cmd.Parameters("@Names").Value = test
If test = "" Then
Response.Write("An error occured")
Exit Sub
Else
returnValue = cmd.ExecuteScalar()
sqlConnection3.Close()
Label6.Text = "Number " & returnValue
View 1 Replies
View Related
May 4, 2008
I have a stored procedure with an output bit variable. When I set this variable to 0, I get an output of 0. When I set this variable to 1, I get an output of -1. What is going on?
View 9 Replies
View Related
Oct 15, 2004
The following query returns 0 when executing in Query Analyzer:SELECT isnull(Count(*),0) as total FROM SplitDetail WHERE SiteCode = 14 AND ProjectID = 4367Yet ExecuteScalar() in vb.net return a -1.
Any ideas on what I might be doing wrong... ?
View 1 Replies
View Related
Dec 3, 2001
I have an sp (attached below) that returns records as desired when run in the query analyzer, but when run from within my adp I get only a "the sp ran successfully but did not return any records" message box. I would like to use it as a record source for a report, and when I try to do that I get a message box saying that the "Provider command for child rowset does not produce a rowset".
To repeat, the sp runs fine in QA, just not in access.
Any thoughts, anybody? Many thanks. David
Alter Procedure spDailyMicroLabel
@Date Datetime = null
AS
IF @Date IS NULL
BEGIN
SET @Date=getdate()
SELECT FERMID, fldfermtank AS "Tank", CONVERT(varchar(12), fldfilltime, 101) AS "Filled",
fldfermprod AS "Brand", CONVERT(varchar(15),fldfilltime, 108) AS "FillTime", CONVERT(varchar(12), @Date, 101) as "ReportDate",
fldfermidold AS "FermenterCode",
CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) AS "FillDay",
"Sample Test" = CASE
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int)=1
THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 3 THEN 'XTF'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 4 THEN 'HLP, TF'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 6 THEN 'TA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 7 THEN 'HLP/UBA, BU/Color'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 10 THEN 'HLP'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 13 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 16 THEN 'HLP'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 19 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 90 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 91 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 92 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 93 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 94 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 95 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 96 THEN 'HLP/UBA'
ELSE 'No Test Micro'
END
INTO #tblTempA
FROM vwUnfilteredFermenters
SELECT #tblTempA.FermenterCode AS "Fermenter ID", #tblTempA.Filled AS "Fill Date", #tblTempA.FillDay,
tblMicroTestDays.Test, tblMicroTestDays.HLPResults AS "HLP Results", tblMicroTestDays.UBAResults AS "UBA Results"
FROM tblMicroTestDays RIGHT JOIN #tblTempA ON tblMicroTestDays.TestDay = #tblTempA.FillDay
END
View 1 Replies
View Related
Oct 2, 2003
hello,
could any one tell how to go about keeping carriage returns and line breaks when inserting a chunk of text so that when that text is recieved it will still contain those carriage returns and line breaks?
also, what datatype would be most appropriate?
thakyou,
zaffi.
View 2 Replies
View Related
Feb 23, 1999
When I was using a simple query using select statement with where clauses, I can get the results. When
I use AND to specify more conditions. It returns no row even though I get the result when query seperately.
What should be the possible cause of this. I am using SQL Server 6.5. Thank you
View 2 Replies
View Related
Oct 15, 2014
I've got some text files that I need to read and make some calculations, before inserting data into a table.
When I use:
Code:
select BulkColumn as txt from openrowset(BULK 'c:Tempdata35.txt', SINGLE_NCLOB) as text
It only retrieves the first row. How can I select all the lines in the file?
View 1 Replies
View Related
May 5, 2008
I'm having trust issue with my HAVING clause.
I'm trying to find customers who have spent X (in this case 500 or more) dollars in a month
--photogs spending $500 or more on products in April, 2008
SELECT PhotogCode, SUM(ProductRevenue)
FROM TBL_Reporting_DailySalesRevenueAndProductUseBy_Photog
WHERE DATEPART(MM, [Date]) = 4
AND DATEPART(YY, [Date]) = 2008
GROUP BY PhotogCode
HAVING SUM(ProductRevenue) >= 500
However, I'm finding that if I use a variation of this (see below)
--all photogs spending money on products in April, 2008 ordered by total
SELECT PhotogCode, SUM(ProductRevenue)
FROM TBL_Reporting_DailySalesRevenueAndProductUseBy_Photog
WHERE DATEPART(MM, [Date]) = 4
AND DATEPART(YY, [Date]) = 2008
GROUP BY PhotogCode
ORDER BY SUM(ProductRevenue) DESC
and I look at the returned rows, I'm discovering that there are an additional 12 customers who have spent $500 or more...is there something I'm missing with the query using HAVING?
Thanks, Steph
View 1 Replies
View Related
Oct 9, 2014
I havethe following query which returns one row of data, however, the MedicalcodeID is NULL.
SELECT db1.dbo.Referral.ReferralGuidDigest, dbo.patient.PatientID, dbo.Consultation.ConsultationID, dbo.Staff.StaffID,
db1.dbo.Referral.EffectiveDateTime AS EventDate, db1.dbo.Referral.Status AS ReferralStatus, db1.dbo.Referral.Mode AS ReferralMode,
db1.dbo.Referral.ServiceType, db1.dbo.Referral.Urgency, db1.dbo.Referral.Direction, db1.dbo.Referral.Transport,
db1.dbo.Referral.EndedDate, db1.dbo.Referral.ReceivedDate, dbo.lkupMedical.MedicalCodeID, db1.dbo.Referral.Term,
[code]...
It is clear from teh above - that the expected MedicalCodeID = 33959 and NOT NULL. I dont understand why SQL added the COLLATE SQL_Latin1_General_CP1_CS_AS to the query - am working on a database developed by another person. Could it be the ACode and ReadCode in dbo.lkupMedical is not set up with SQL_Latin1_General_CP1_CS_AS. How to implement to LkupMedical table....
I changed HIGHLIGHTED JOIN to Inner/Right but it never yielded any results, no record found..
View 12 Replies
View Related
Feb 16, 2006
When I'm checking the syntax in Query Analyzer for the following code, I get the error:
"Must declare the variable '@TempVariableTable' "
spGetTableTesting returns a table
CREATE PROCEDURE spGetTable
(@VALUE1 nvarchar(50),
@VALUE2 nvarchar(50))
AS
SET NOCOUNT ON
DECLARE @TempVariableTable table
(Field1 int)
EXEC @TempVariableTable = spGetTableTesting @VALUE1,@VALUE2
GO
How do I set the @TempVariableTable to the results from spGetTableTesting?
Thanks
View 6 Replies
View Related
Dec 11, 2007
It is common for me to need to create ratios from data in my database such as
SELECT
( list_value / sale_price ) as ratio
FROM
values
The value returned is always an integer whether decimal is cast or not. IE if sale_price is > list_value then 1 or 0 is returned instead of the percentage (ratio) as expected. Only whole numbers are returned.
BTW. Same is true in postgres db I have as well. What is it that I am doing wrong?
doco
View 5 Replies
View Related
Feb 16, 2008
Hi all
According to BOL, Stored Procedure SP_DEPENDS will return two result sets , showing Dependency of an object for example a Table
USE Northwind
EXEC sp_depends 'Customers'
But when i execute the above command nothings happens !!! and sql server returns nothing ? why? where am i wrong?
Thanks in advance.
Regards.
View 3 Replies
View Related
Jul 20, 2005
Goodmorning,Could I have a SELECT statement that normally returns two rows,but that instead returns one row appending to the first row the secondone of the result ?For exampleQuery: "SELECT username from tab1 where year in (2001,2002)"Result:1° - "'John'"2° - "'Adam'"Instead I need:Result:"'John','Adam'"?I have Win2000 Pro , SqlServer2000.Thank You--Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
View 3 Replies
View Related
Dec 12, 2007
My first foray into the SQL CLR world is a simple function to return the size of a specified file.
I created the function in VS2005, where it works as expected.
Running the function in SSMS, however, returns a value of zero, regardless of the file it is pointed at.
Here's the class member code:
Public Shared Function GetFileSize(ByVal strTargetFolder As String, ByVal strTargetFile As String) As Long
' Returns the size of the specified file.
' Parameters: strTargetFolder = path to target file, strTargetFile = target file name.
Dim lngFileSize As Long
Dim objFileInfo As FileInfo
' Confirm file exists.
If Not File.Exists(strTargetFolder & "" & strTargetFile) Then
Return -1
End If
Try
objFileInfo = My.Computer.FileSystem.GetFileInfo(strTargetFolder & "" & strTargetFile)
lngFileSize = objFileInfo.Length
Catch
' TODO: add error handling; system folders cause error during processed.
End Try
Return lngFileSize
End Function
In SSMS (sp2), here's my assembly steps (this is my local dev machine; I have admin rights):
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
-- For file system access, set the database TRUSTWORTHY property.
ALTER DATABASE dba_use
SET TRUSTWORTHY ON
CREATE ASSEMBLY GetFolderInfo
FROM 'C:ProjectsGetFolderInfoGetFolderInfoinDebugGetFolderInfo.dll'
WITH PERMISSION_SET = UNSAFE
Here's the udf declaration:
CREATE FUNCTION dbo.udfGetFileSize( @strTargetFolder nvarchar(200), @strTargetFile nvarchar(50) )
RETURNS bigint
AS EXTERNAL NAME
GetFolderInfo.[GetFolderInfo.clsFolderInfo].GetFileSize
And the function call - note the target file is on a remote server. Actual file name differs slightly:
SELECT dbo.udfGetFileSize('\SomeServerName$MSSQL2000MSSQLData', 'SomeDBName_Data.MDF')
This always returns zero with no error displayed. Running Profiler was little help and there's not much in the Event Log.
The function returns correct values in VS2005.
The assembly is created with UNSAFE because using EXTERNAL_ACCESS resulted in a security error that prevented the assembly from being created, let alone running. Security is, I suspect, at the root of this issue as well, but I'm not sure what or where to look to verify this.
Any assistance is greatly appreciated.
View 3 Replies
View Related
Jul 6, 2005
Hi all,
My Problem is Hoe the Stored Procedure returns data to the Calling Env.If it is fieds values then we can use the OUT Parameters.In Case of My SP returns more number of rows .Then how we capture the data and returs to the Calling Env.i know that we can use the Cursors in Oracle but how is it in SQLSERVER???????pls
pls Help me throw some samll exps.Any help Really appriciate..ThaksRams
View 2 Replies
View Related
Aug 9, 2005
After doing an insert, I am using a System.Data.SqlClient.SqlDataReader to fetch the identity of the inserted row with the following code:
dbCommand.CommandText = "SELECT @@IDENTITY As LogID SET NOCOUNT OFF"Dim dataReader As System.Data.SqlClient.SqlDataReader = dbCommand.ExecuteReaderdataReader.ReaddataReader.GetInt32(0)dataReader.CloseThe problem is that I'm getting an invalid cast exception. If I use dataReader.GetDataTypeName(0), it tells me that value is a decimal? This is odd because the identity column in the SQL table is an int (size: 4). When I use very similar code for another database on the same server, it works .Anybody have any ideas?
View 4 Replies
View Related
Apr 22, 2006
Hello Dears;
I added an SqlDataSource to count rows number and display it in the footer of GridView. but idon't know how to refer to that ogject to display the rowcounts. I tried to declare it with Dim but didn't worked out.
Any Idea , pleas?
Thanks alot
View 4 Replies
View Related
Jan 10, 2002
Hi,
how can I remove newline characters and tabs from a char field in sql.
We are directing the results from a query to an excel and having the newlines in one of the columns is messing up the whole output.
thanks
Zoey
View 1 Replies
View Related
