Subreport, Start Page And Table Header

Feb 27, 2007

My problem is about the rendering behaivor of large subreports (more than 1 page) In that cases the subreport begins in a second page (a new page), it skips the end of the first page and starts on the top of the next page, leaving the first page with blank space. Another efect of this behaivor is that the parent table's header row will not print to the next pages even it the RepeatOnNewPage is set to true.

I saw many posts related to this (I list them at the end) and only one answer from the Microsoft team (in the post of the user Luca B. - sub-reports don't start in the first page http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=18227&SiteID=1). In resume, the answer is that there are an implicit keep toghether property and that this behaivor will be reviwed in the fucture

I am using SQL Server 2005 with SP2 and the "behaivor" continues.

Someone of the Microsoft team can tell us if this behaivor will be changed and when?

I find the folowing posts reletade to the problem:

Post title - Author- URL

sub-reports don't start in the first page - Luca B. - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=18227&SiteID=1

Can't get a Subreport to start on the correct page or table header to repeat on multiple pages - unit107 - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=423599&SiteID=1

Subreport not printing or exporting properly - EJJ -http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=803828&SiteID=1

Sub Reports Issue - Leo12 - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1033532&SiteID=1

Sub report ocassionally forcing page break when printing - Tom Majarov - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=244333&SiteID=1

Headers on new pages using Lists and Subreports - Charleh - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=93675&SiteID=1

Subreports and page breaks - dsavill - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=355655&SiteID=1

View 4 Replies


ADVERTISEMENT

Can't Get A Subreport To Start On The Correct Page Or Table Header To Repeat On Multiple Pages

May 24, 2006

I am staring to lose my mind on all this "work-around" BS in trying to create a dynamic header.

I have a report with contains a table, whose first two lines are a header line in which I want to repeat on each page. Then I have about 20 detail rows of information related to the header. The 21st detail row is a merged cell that contains a subreport relating to the header item.

When printing to PDF, the detail rows consume about half the page and the subreport is anywere from half a page to several pages long. When the subreport is more than half a page, it skips the end of the first page and starts on the top of the next page, leaving the bottom half of the first page blank. No matter what I set the page breaking to, it continues this behavior. In addition, when the subreport data spans more than one page, my parent table's header row will not print to the next page even it the RepeatOnNewPage is set to true.

I am coding this way because I have found no good way of creating a dynamic header that will correctly and consistantly display data that has detail that spans more than one page.

Any thoughts on what I might be doing incorrect?

View 6 Replies View Related

No Table Header When Subreport Overflows To New Page

Feb 25, 2008

Hi guys,

I hope hope you can help me because I am sort of helpless here. I searched the web for this issue ("reporting services subreport overflow to new page no table header in main report"), however could not seem to be lucky enogh to find a result. The search string pretty much sums it up: A table cell of my report contains a sub-report that displays multiple lines of data itself. If the data output of the sub-report is long enough to overflow to the next page, the table header of the main report table is not displayed on the new page.

Some background info:
The data table of this report has three data rows per record, the first of which contains a cell containing an employee's name and some more merged cells containing the sub-report in question. The header row of the main report data table has the attribute "RepeatOnNewPage" set to true and the data table itself has the attribute "RepeatHeaderOnNewPage" also set to true. If it matters, the SQL Server version is the one needed to run MS CRM 3.0 - 2000 it was, IIRC. My software design environment ist Visual Studio 2003 with the Reporting Services addon.

So, if anyone of you knows, what do I have to do to display the table header even on the pages a sub-report overflows to?

I very much look forward to your answers or helpful links.

Best regards
Tobias

View 3 Replies View Related

Page Header And Page Footer Not Loading Report Items In The Main Report When Subreport Called?

Apr 2, 2007

Hi All,



I am having a main report having two subreports, say M1,S1 and S2 respectively.

The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,

Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()

Any Solution?





Thanks and Regards

Pragash

View 1 Replies View Related

Page Header And Table Header Display But Groups And Rows Do Not

Nov 6, 2007

I have a report that I created and the report was working until I added some fields to a group footer row in a table.

My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.

What happened to the rest of the data?

All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.

Thanks,

Fred

View 1 Replies View Related

Reporting Services :: Subreport Header Is Not Showing Inside A Report With A Header On Its Own?

May 13, 2015

I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?

View 3 Replies View Related

Printing Table Header On Every Page Of Report

Jan 10, 2008

I have report with a table, that generates rows to more than 1 page. When the user prints the report, each page should show the table header.
Presently or by default , the table header is shown(printed) only on the first page.

Please let me know, how can I achieve this.

View 4 Replies View Related

SSRS 2005: Report Header Does Not Export To Excel As Page Header

Mar 13, 2008

I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?

View 1 Replies View Related

Report Header Pagination: On Next Page(2) The Header Is Disappearing In IE

Nov 6, 2007

Hi Friends,

There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.

But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.

I donot why it is happening?

Your help is highly appreciated.

Thanks
Novin

View 1 Replies View Related

Local - Including Page Header Forces Viewer To Expand To Page Size

Jul 17, 2007

Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.

I have a 7" wide report, with .75" borders set on each side.

Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.


When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew

View 1 Replies View Related

Removing The White Space In Between The Image And Page Border Of The Page Header

May 26, 2008

Hi Team,


When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?

View 1 Replies View Related

Page Header Taking Up Blank Space On 1st Page Even If Not Printing

Apr 15, 2008

In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.

View 8 Replies View Related

Subreport Header Which Contains No Records, Is Added To The CSV Output

Apr 9, 2008



Hi All,

I've got a main report with five subreports. Based on a value of a parameter in the main report one the subreports is filled with data, all the other subreports will have no records. When the report is displayed in on the reportserver it is working fine, bit when I export the data to a CVS format, also the element names of the subreports are added to the CSV Output.

When i change the value of Data Output of the subreport item in the main report to Auto it doesn't export the records of the filled subreport.

How can I disable the export of the dataelement names in the CSV export?

Hope you can help

Thanks,

Eric

View 2 Replies View Related

Nested Subreport Causing The Parents Last Header To Expand. Why? How To Fix?

May 10, 2007

I have created a "parent" table with various columns and added an extra detail row to drop a nested subreport into the table passing parameters into the sub in order to obtain the child subreport. The problem is that the the while I can line up the columns in the sub report with the parent report,

I observe something like this:

parent columns:

a b c d e f

child columns

a b c d e f

The problem is in the last column of the parent "f" it appears stretched out for some reason-about an inch even though can grow is set to false.

Its like the child is forcing the parent's last column to expand yet when i observe the border around the table in the child the "f" is clearly more narrow than the parent's f despite my matching the column widths in the layout exactly the same . In preview mode, the parent's last column is extended width-about an inch more was added. Note I tested it with No data in the child's last column and it still expands the parent column by that inch.

Also note when I dropped the subreport into the parent report I'm merging the cells on the detail row that the subreport fits across columns a, b, c, d, e, f.

So even though the subreports data lines up properly under a, b, c, d, and e; the parent's "f" still expands outward.

Any clues or suggests on what I should consider changing. I'm stumped.

View 1 Replies View Related

Using Pagenumber Outside Of Page Header And Page Footer

Sep 14, 2007

can i use 'page number' and 'total pages' outside the page header and page footer?

View 1 Replies View Related

Page Header Being Truncated When Page Size Changes

Nov 26, 2007

I think I know the answer but I have a report that is supposed to print in Ledger. It has a header that has report information on the left and on the right has page count and date run. When the user resizes the page to letter, only the first part of the header shows (left piece with report information). Instead of resizing the header it seems it truncates it. Is there a way to resize it. If I move the right side over it looks centered on the Ledger size.

View 1 Replies View Related

Report Viewer In ASP.NET - Subreport Page 2 Goes Back To Main Report Page 2 On Paging

Nov 22, 2007

What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.

Conditions:

ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:


Download the source code here.

Follow the directions (near the bottom of the post) to get the project set up.

Run it and click on a link in the first report to go to the second report.

Click the arrow for page 2 of the second report.

Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).

Click on a link in the first report to go back to the second report.

Click the arrow for page 2.

Notice how it takes you to page 2 of the second report.


Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx

So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.

View 6 Replies View Related

How To Render A Subreport Per Page?

Apr 29, 2008

I have a requirement that I'm having a difficult time figuring out.

I have a number of subreports, 27 of them, and I need to put them all on a single report, and have each one render on a separate page. Each of them I can be sure is a single page - how do I force a page break after each subreport?

I've been trying a number of strategies, tables, lists, rectangles, etc, with no luck...

Any thoughts or suggestions would be greatly appreciated!

Thanks,

B

View 3 Replies View Related

Subreport Page Overflow

Nov 28, 2007

Hello,


I have a subreport that consists of a header, text boxes, and a table beneath that I'm exporting it to create a pdf. The report shows fine in the report designer, however when I export it to create a pdf and there's alot of rows in my table, the text boxes will not repeat on the next page. The header shows along with the remaining rows from the table. Is there a way for me to have my text boxes show on page overflow. Thanks for any help you give.

Best regards

View 16 Replies View Related

Page Break Before Subreport

Feb 19, 2007

hi all

i m using two subreport in my report. i want to show each subreport in different page. pls suggest me how i can implement this.

thanks in advance

View 2 Replies View Related

How To Open A Dynamic Subreport In A New Asp.net Page

Jul 10, 2007

Hello,



We have an asp.net page that pops-up from the main site and has the report service control on it. This first pop-up page generates the report and has embedded links for multiple sub reports. When we click on the link for the sub report it generates the report but it stays in the first pop-up. Is there a way to have another pop-up(preferably a different pop-up for each link the user clicks) page? Thanks in advance.



John

View 1 Replies View Related

Has Subreport Page Break Issue Been Fixed?

Feb 27, 2008

Subreports use an implicit keeptogether which creates a page break before the subreport if it cannot entirely fit on the previous page. I saw in another forum that MS was working on updating this functionality. Has there been any update to this?

View 5 Replies View Related

Reporting Services :: How To Get Table Header Dynamically From Table Header

Oct 7, 2015

I have a sql query

create table temp
(
    date1 datetime,
    category varchar(3),
    amount money

[code]....

In above format:15-10 means Oct 15, 15-09 means Sept 15I am getting issues while formatting this in SSRS.I need SSRS table headers to be dynamic. I need that it should be according to the sql table header...The table header should change according to the sql query

View 2 Replies View Related

Reporting Services :: Adding Subreport In Page Footer

Oct 20, 2015

I was asked to add a subreport in my report footer so that it appears on every page of the report. I spent some time trying to figure it out or find an answer on the web, but it appears it can not be done.

View 4 Replies View Related

Toggle Page Footer Visibility Based On Subreport Being Rendered

Nov 19, 2007

I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.

The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.

Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?

Thanks in advance for all replies.

John

View 4 Replies View Related

Fields In Page Header

Aug 27, 2007

Hi guys,

I'm doing a local report which requires me to have a data field on page header(company name & address particularly). Since it is not possible to place a data field on page header, what I did was placed the field instead on the body, and then I placed a text box on the page header and then reference the data fields in the body to the textbox.

Everything looks ok, but I found out that when I try to move to another page, all the values on the header will be empty. It seems that it requires that the same data fields should exist in the body of report.

Are there any other workaround here? I just need the values on the page header persist all through out the report. BTW I'm doing a report that contains combination of fields and table, to be specific, I'm creating a resume / bio data.

Any inputs would be greatly appreciated. Thanks!

View 1 Replies View Related

ReportItems In Page Header

Oct 23, 2006

I've added a hidden field to my report so I can show the value in the page header using ReportItems. However it only works for the first page - the value is blank on subsequent pages. Does the hidden field need to appear on all pages of the report? Would I need to make it a hidden field in a repeated list or table?

View 8 Replies View Related

Parameters In Page Header

Sep 21, 2007



I am trying to put my parameters in my page header.It do works fine.I am using a textbox to hold the value of my parameters.I use


= Join(Parameters!resourceParams.Label, ", ")

in my textbox expression.But my problem is,when there are too many values specified(because i am using a dropdown with multi select) the page header,overlaps the body of my report. The page header's text overlap the contents of my report body.What could be the reason or work around for this?? Thanks guys

View 1 Replies View Related

Problem With PAGE HEADER

Feb 27, 2007

Dear All

I am Sundaraguru from India.

I have problem with Reporting services header showing time..

I designed the one report. That report Size is 8inch x 41 inches..

What are problems i having in this reports:

1. Report header is not coming in second pages. ( For report header i am not using the report header area, Because the header informations will varying based on the data's. That's Why I placed in the detail sections)

2. While Seeing the preview time it is showing only 11 page ( for 2 record) after exporting to PDF format it showing 32 pages.

How i can solve the above problem.. I have to get is all the page's i have to show report header in all the pages.

I am using SQL Server 2005 , & VS.Net 2005 With November 2006 CTP

And Send your valuable suggestions to following mail id's sundaraguru_s@apollohealthstreet.com and sundharmail@yahoo.co.in.

Advance Thanks

Kind Regards
Sundaraguru S

View 1 Replies View Related

Include Field Value In Page Header

Mar 11, 2008

I want to include a value from my result set in the header of my report but get the "You cannot reference a field value in the page header or footer" message. Here's why I want to do it:

The report uses three parameters: Date1, Date2 and Type. If Type is set to DATES the stored proc uses dates 1 and 2 as criteria to limit the returned records. Because Dates 1 and 2 are set in the report I can use the parameters collection to get those values and include them in the title of the report. If the Type paramter is set to MONTH, dates 1 and 2 are ignored and the stored proc determines what the dates are going to be using a UDF called from within the proc. The only way I could think of to get these calculated dates back from the proc was to insert them into the temp table it creates. Cheesy, I know... but I got the dates to the result set. Problem is I can't use them for what I need. So... to make a short question very long... how can I get the values in the result set into something I can use in the header or footer?

Mike Devenney

View 3 Replies View Related

Report Links In Page Header

Oct 4, 2006

I have a report that I put links to other reports in the page header.

When I click on those links, I get the error:

"source of the report definition has not been specified"

If I move the links to the body of the report, they work fine.

Is this a bug or a limitation, and will we eventually be able to put links in the header?

Thanks!

BobP

View 3 Replies View Related

Lists: Can't Get A Header To Appear For Each Page Of My List

Apr 16, 2008



I want to display a phone directory by department.

I created a list and told it to group on department and then I put a table in the list that had PhoneNo, EmployeeName as the columns.

Now the list works in that it seperates that table out by department (so 5 departments means 5 instances of the table with a text box above the table but inside the list with DepartmentName.Value).

The problem though is that text box only appears once for each table, the first time the table is generated. I can't get the department name to display at the start of each page.

Do I need another sublist or something, how can I get the department name textbox to appear at the start of each page for my list?

So what I have is:
DEPARTMENT NAME: Sales
---(table starts here)
.............5555...Smith
.............lots more names.......
- - - - - - - - - - - - - - - PAGE BREAK - - - - - - - - - -
---(table continues on from last page...)
.............4444...Johnson
.............3246...Benson
---(table ends here)
------------------------------------new iteration of this, so the next department is IT and this all repeats again

What I want to get is:

DEPARTMENT NAME: Sales
---(table starts here)
.............5555...Smith
.............lots more names.......
- - - - - - - - - - - - - - - PAGE BREAK - - - - - - - - - -
DEPARTMENT NAME: Sales (this is repeated as it is the start of a new page, in a perfect world I'd be able to even say "Continued..." after the department name on all pages that were not the first page it appeared)
---(table continues on from last page...)
.............4444...Johnson
.............3246...Benson
---(table ends here)
------------------------------------new iteration of this, so the next department is IT and this all repeats again with department name at the start of each and every page

View 1 Replies View Related

Page Header And Excel Export

May 9, 2007

Hi all,



Does anyone know of a way to keep from exporting a page header when rendering in Excel. We have a default header (title and logo) that I would like to suppress so that users don't need to delete the rows prior to sorting (to eliminate merged cells).



Thanks,

Simone

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved