Subreport With 3 Columns Renders In Main Report As A Single Vertical Column.
Aug 28, 2007
I have embedded a subreport in the detail section of my report. When I view the subreport in page preview mode it renders with three columns, but when it is rendered w/in the main report in page preview mode the 3 column layout is rendered as a single verticle column.
I've defined the columns in the Body/Columns. I have also set the report inteactivesize and pagesize heights in an attempt to remedy the issue. Margins are set to 0.
I was wondering if anyone knew how to take a value from a subreport and compare it to a value iwthin the main report. We are trying to see if the value in the subreport is greater than the value returned in the main report. We want to make the value test red if it is greater than. I know how to compare these values if they were in the same report, but when it comes to subreports I am lost. Any ideas? Thanks in advance.
I have 2 reports where 1 is a subreport and the other one is a main report. Can i change or refer to a control(item) in the main report depending on the value of an item in the subreport, when the subreport is being run?
Is there anyway that i can access subreport field in main report? I just want it to be displayed. Thats it. I can not put subreport field in main report bcz it is based on the parameter passed by main report.
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345 Address line 1 DEF-12345 Address line 2 GH1-12345 City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License ------------- ------------------- ------------- --------- ---------- --------- Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line. IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345 DEF-12345 GH1-12345 Address line 1 Address line 2 City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
This is the part that I need help. I need to use an original value from the main report and a "return" value from the subreport. Main Report (Footer) Sum(FinalPayment) + SubReport.Sum(PaymentAdances)
Is it possible to pass a return value back to the main report from a subreport?
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance
I have a main report and a subreport. If the subreport doesn't have any data then I hide it, but the main report still shows the white space of where the subreport would show up if it had data. So how can I get rid of the extra white space in the main report?
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I have created a Report using Visual studio-the report displays a subreport within it.
On the Subjective Report I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value), and I have named this text box €™SubRepM1€™ The name of the subreport is €˜subreport1'.
On my Main Report, again I have 12 values for each month of the year. For the first month the value is =sum(Fields! Month_1.Value)*-1, and I have named this text box 'MainRepM1' The name of the main report is 'GMSHA Budget Adjustment Differentials'
The report displays both of the subreport and main report values but I now need to total these values together for each month in order to produce a grand total.
I have tried using the following to add the totals for Month 1 together, =subreport1.Report.SubRepM1 + MainRepM1 but this does not work and I get the following error message €˜The value expression for the text box 'textbox18'contains an error [BC30451] Name subreport1 is not declared'.
I feel that it should be a simple matter of adding the two sets of values together but I€™m having major problems trying to get these totals to work.
Can we build a report like the one shown above . Basically the columns will be on vertical columns and values of the columns will be next to it ? I know there is matirx control but it is  for multiple columns .
In business objects we have separate control for this but in ssrs we have 1 table control and another matrix control. I think i need to modify matrix control to achieve it...
We are working on a some required report templates and we are in a some deadlock now... We need to desing report templates something like on the image below. There are some data at the left and top (grey rectangles) and dynamic information from a datasource in the middle (actually a list - green rectangles). Our idea was to use a subreport to design required list, but the problem is that subreport does not support multi-columns layout (really very 'interesting' limitation from Microsoft's guys)... Does somebody have a some ideas how to design this report using MS SQL Reporting Services 2005?
I have constructed my main report using the table item from the toolbox. In maintable I have two groupings.
In the maintable I have grouping2 set for a page break after each grouping.
I have set the subreport parameter to the field value of the maintable grouping2.
I want to display the contents of the subreport after grouping1 of the maintable on the same page.
I have achieved a result by placing the subreport in maintable_group2 footer. However when I save it as an excel sheet it says "Subreports within table/matrix cells are ignored".
I really don't like how the report displays like this in the report server however I will need to export this report to excel.
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. Â I can run the subreport without any problems. Â I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report. Â
For testing, I created the subreport without a parameter and added it to the main report. Â When I ran it that way, the report worked and sub report displayed the data. Â So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter. Â
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
I have a rather complicated report with lots and lots of textbox and line controls. When I preview the report on the Report Server the layout is all kinds of skewed and all kinds of stuff is out of place. But when I export the report to PDF or TIFF, the output reverts to it's proper form. Why is it doing this? Is there anything that I can do to not make it so ugly when previewing?
I’m trying to figure out a way to sum columns for similar IDs, based on the contents of a single field. For example, if I’m calculating attendance percentages for students, and codes P and T count as Present, and codes A and E count as Absent, I would want to total Present and Absent codes separately, in their own columns. I would then like to use those totals to calculate percentage, but I can do that. It’s the SUM based on column value (by ID) that is giving issue.
I’ve been playing around with nested queries, but nothing’s working. This is a glimpse of the mess that I’ve created trying to sort this out. Many errors.
I just noticed that I used a simpler example than the SQL I included, so I modified it a bit. There are additional fields that I'll need to include, but I want to get the logic working correctly. From there, I can handle the rest. So here's a more appropriate code example showing the direction I'm trying to go with this.
SELECT ID, [Last Name], [First Name], CD, Present, Absent, CAST(LEFT(Present / (Absent + Present) * 100, 5) AS varchar) + '%' AS Percentage FROM (SELECT ID, CD, TotalAHD, CAST ((SELECT SUM(TotalAHD) AS Expr1 FROM SumAHDforAttndPercentages AS p
Hi This is probably a very basic question for most people in this group. How do i split the data in a column in to 2 columns? This can be done in access with an update query but in MS SQL server I am not sure. Here is an example of what i want to acheive
hi, i am having 2 columns in a table in a dataset. i want to add those two columns and bind the resultant total as a single column to the datagrid. is it possible. if yes, how o acheive this? please help me. thanks in advance. muppidi.
Suppose that I have a table with following values Table1 Col1 Col2 Col3 ----------------------------------------------------------- P3456 C935876 T675 P5555 C678909 T8888
And the outcome that I want is: CombinedValues(ColumnName) ---------------------------------------------- P3456 - C935876 - T675 P5555 - C678909 - T8888
where CombinedValues column contains values of coulmn 1,2 & 3 seperated by '-' So is there any way to achieve this?