I keep getting this error message on the subscription execution, even though the account is a domain administrator. Both publisher and subscriber are on the same domain. Can someone tell me what is the problem?
Message
Replication-Replication Distribution Subsystem: agent [Agent Name] failed. Executed as user: [Domain]administrator. A required privilege is not held by the client. The step failed.
Regards,
I am getting this error message "Replication-agentclassname: agent F1TESTSQLSERVER20-ELC-ELC_Pub-F1TESTSQLExpress-39 failed. Executed as user: . A required privilege is not held by the client. The step failed." All the users replication agents have failed and I am looking on how to resolve this serious error. Where do I start? I am using merge replication.
Thanks!
SAM
I running SSIS package job without sql agent , it is working fine.when i am running through sql agent not running.
created Proxy accountÂ
job failed and give above error.
Server is cluster and taking data from desktop.
server is in one domain and desktop in another domain.
I'm using our development ID to set up peer-to-peer replication. I am following the steps outlined in the BOL using SQL Studio 2005. When I created the initial publication, I read the section on permissions and assigned the development login ID db_owner. Indeed, to eliminate any possible issues (I thought), I gave it db_datareader, db_datawriter, and all the db admin rights and made very sure the db_denydatareader and db_denydatawriter roles were not checked. I did this through the Logins section of the Security folder and applied the same rights to both the distribution and the publication database. Nevertheless, when I run the LogReader agent job, it fails with the message for step 2 that:
Executed as user: ourdomsqldev. A required privilege is not held by the client. The step failed.
The dev ID essentially has sa rights to the server and all the databases. It is also a domain authenticated ID. Any ideas what's causing this problem? I really need to get the replication going reliably before the weekend is out.
Thanks.
Randy
Quick question- how much disk space is required on the subscriber to initialize a subscription (transactional replication) – does it have to copy the snapshot files (e.g. the bcp files etc) from the distributor, and then initialize the subscriber from this, or does it do this over the network?
Does it differ depending on whether it is push or pull?
Say I have a 10 GB snapshot on the distributor with a push subscription to the subscriber. Do I need 20 GB free on the subscriber? E.g. 10 GB to receive the snapshot files + 10 GB for the subscriber DB? Or just 10 GB for the subscriber DB which is initialized from the snapshot files over the network?
Thanks in advance for any help with this.
Hy
I want to ask, that I have a MS SQL 2000 Enterprise edition server. How much memory required per client. I know, the SQL system memory required (more 1 G) but my question is, if my SQL server use plus one client, how much memory must take in my blade?
pls help
I am recieving error 4606 Granted or revoked privilege SELECT is not compatiable with object.
Canot read the next data row for the dataset BEEP.
However when I use the same userid/pwsd in Crystal to access the same stored proceedure I have no problems accessing the data.
We have already tried re-granting the permissions to the userid to no avail.
Are there any other suggestions?
Phread
We have 15 clients running our applicaton
14 of then conected to SQL server using TCP/IP and it runs fine
1 of 15 when connected using TCP/IP produce "..Time out error "
but runs fine when swiched from TCP/IP to Named pipes
1.What area should we look to correct problem with Time out using TCP/IP ?
2. Where to get information about using TCP/IP via Named pipes ?
Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
View 78 Replies View RelatedHi,
I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.
I receive this error :
SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools
The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?
In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !
Thank you
I have a table with embedded files in it and also ftp server/user/pwd fields so that each record has all the data and information required and need to configure an SSIS package to to FTP them to the destination as specified in the record within the databaseAt the moment I have a data flow task which uses a Derived Column and an Export Column transformation which creates the files to a temp folder then it runs a ForEach loop container back on the control flow to FTP each file and to then move each file to an archive folder.
All I think I need to know how to do is to somehow control the FTP connection settings with the fields from the database within this foreach loop, but it is a for each file collection. I also need to update each record saying it has been FTP'd as well
Do I need to have an initial query outside of this foreach loop to populate an array which can be used for the 4 FTP connection fields (server/user/pwd/directory), if so how?
Any ideas as to how to correctly finish this package.
Thanks
Hi,
I have setup merge replication between SQL Server 2005 and SQL Server Express. The setup uses web synchronization. (And the setup uses dynamic filter HOST_NAME)
On some of the client machines, replication fails with the following error (when initializing the subscription):
from subscriber merge agent verbose log:
A dynamic snapshot will be applied from 'D:DOCUME~1JBAUMG~1.CORLOCALS~1TempDB101-EQA-SCL_BQDB_BQ_PUB_BQDB'
Validating dynamic snapshot
2007-04-1819:39:45.434 OLE DB Subscriber 'FRG-BAUMGARTENJSQLEXPRESS': sys.sp_MSregisterdynsnapseqno @snapshot_session_token=N'\XXX.XX.XX.XXSnapshotuncDB101-EQA-SCL_BQDB_BQ_PUB20070417180079dynsnap', @dynsnapseqno='5599F67E-A1A9-4573-A14F-9851F6FE4B51'
(Note: XXX.XX.XX.XX is a proper IP of DB, I have just masked it in the post)
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file.When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
I enabled verbose logging for the snapshot agent for the subscriber, but there was no error there. It is obvious from the log info above that the error occurs only after downloading the snapshot to the client and during applying it to the subscriber by the merge agent.
After I got this error, I tried running the subscriber program again and it successfully replicated on the third attempt. But this behavior is not consistent and it fails for most of the time on some of the machines
Any info on this error?
I am getting "Row not found on subscriber" error on the subscriber. I am trying to find the root cause.
1. Records get lost during publication initialization from backup, could not reproduce it though. I was inserting records in a loop into a replicated table while initializing the publication from backup. After the backup/restore finished, I have stopped the insert, allowed the replication to catch up and compared the row count, it was identical.
2. Someone or some process is deleting the records on the subscriber. Setup Audit, but could not confirm this theory so far.
3. Records get deleted twice, as we publish the execution of some bulk delete archive jobs, to fix latency issues. Found this article, which says, this is not the case:
[URL]
4. Records are deleted on the subscriber by triggers. The impacted database has no triggers.
I am running SQL Server 2008 R2.
What else could be the cause of this problem?
Hi
Using merge replication - the stored procs are published articles.
When trying to change the article at the subscriber (sql express) I get the following errors:
Msg 21531, Level 16, State 1, Procedure sp_MSmerge_alterschemaonly, Line 45
The DDL statement cannot be performed at the Subscriber or Republisher.
Msg 21530, Level 16, State 1, Procedure sp_MSmerge_ddldispatcher, Line 181
The DDL operation failed inside merge DDL replication manipulation.
Msg 3609, Level 16, State 2, Procedure usp_Anniversary_upd, Line 21
The transaction ended in the trigger. The batch has been aborted.
Does this mean it can only be changed at the publisher ?
Bruce
Any help at this stage is welcome!
Due to collation-discrepancies the publisher and subscriber databases have been recreated.
When however I attempt to restart the publishing...SQL gives the message
"The process could not make a generation at the 'Subscriber"
There is enough space on the harddisk of either subscriber or publisher 3Gbyte+
UserRights are ok and I reinitialized the publication.
Everything seems ok and yet I get the error mentionned above.
Can anyone give me some help with this?
Thank you!! :)
VincentJS
Hi ,
I urgently need a solution for this. I have configured merge replication between a webhoster and a local machine
and it is working perfectly but when I am adding an article (table) which has a CLR assembly associated with it,
the merge replication is failing saying it cannot apply the schema of the CLR assembly at the client. I think Microsoft
supposedly says in it's documentation that merge replication supports CLR assemblies. I have recreated the snapshot
after selecting the table (article) and I have reinitialised the subscription also but it is just not working. It is the simplest
of replication with just one publisher and one subscriber.
Thanks,
Andy
These errors occur at the subscriber. First, "The merge process could
not query the last sent and received generations" is generated, then
immediately afterwards, "invalid cursor state" is generated. We are
trying to pull a new subscription snapshot from the republisher. The
subscriber has been added and removed from the replusher's pull
subscriptions a number of times for testing. Now, we cannot get the
subscriber to re-sync with the republisher.
Any ideas?
Hi all.
I get the following error when trying to run a pull subscription from the subscriber:
The schema script '' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
The process could not connect to FTP site 'ftp://ESOFTSERVER.NO-IP.INFO' using port 21.
(Source: ESOFT (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
The connection with the server was reset
(Source: (OS); Error number: 12031)
---------------------------------------------------------------------------------------------------------------
I've tried everything I could to solve this problem, but I can't get it working.
Thanks for any advise.
Fabio Reynoso
Hi everybody,
I' m working with visual basic 6 and I would like to connect to my sql server database but I get the following error :
"Run-time error 424":object required.
here is my code:
sqlserverlocation = "192.168.0.102"
sqldbname = "NUTS_MEETDB2"
application.lock
sConnection = "DRIVER={SQL SERVER};Server=" & sqlserverlocation & ";Database=" & sqldbname & ";UID=AiSE_RW;PWD=3333"
Set myConn = Server.CreateObject("ADODB.Connection")
myConn.Open sConnection
SQLST = "Select [close] from Quotes order by date asc"
Set myKeyRst = Server.CreateObject("ADODB.RecordSet")
Set myConRst = myConn.Execute(SQLST, , 1)
myKeyRst.Open SQLST, myConn, 1
the erroe is located at the line :
Set myConn = Server.CreateObject("ADODB.Connection")3
thank you
Hello friends, I have been trying to install SQL Server2005 but I can't. I have .Net framwork 2.0 on my computer. At the end of installation at Reporting Services the following error occurs.
Error: The required version of .Net framwork is not installed.
So first I installed .Net framwork SDK, the problem was same. After that I install .Net framwork 3.0 direct from microsoft but all in vain.
Now I need help about which of the .Net framwork must be installed on computer before installing SQL Server2005.
Thaks a lot..
Hi all,
here is the context of our problem:
- Publisher :
version SQL Server 2005 SP2
table in SQL Server 2000 (80) compatibility level
publication in SQL Server 2000 compatibility level
- Distributor : SQL Server 2005 SP2
- Subscriber : SQL Server 2000 SP4 + hotfixes (version 8.00.2187)
There is only one article in our publication (a simple table with a GUID and a nvarchar(50) columns), and we have left the default resolver.
1 - The first synchronization of the subscription is successfully completed, and it is the same for the different updates/inserts/deletes or conflicts.
2 - Then we change the Resolver of our article by our own COM-Based Custom Resolver (developped in C# 2.0). This resolver only change the default behaviour: the subscriber always win (this is for a test, in the future we will have a complex business logic). All the synchronizations works fine and do what we want in the conflicts.
3 - We rollback the resolver to the default one... and here is the problem!
The synchonizations stop to work correctly. For all of them we've got the same error:
Code SnippetReplprov.dll , 2007/09/25 14:26:07.591, 4000, 16890, S1, ERROR: ErrNo = 0x80045017, ErrSrc = <null>, ErrType = 8, ErrStr = The schema script '
declare @cmd nvarchar(1000)
set @cmd='exec sys.sp_MSchangearticleresolver @article_resolver=@ar, @resolver_clsid=@rc, @artid=@ai, @resolver_info=@ri'
exec dbo.sp_executesql @cmd, N'@ar> nvarchar(255),@rc nvarchar(40),@ai uniqueidentifie..." mailto:N?@ar">N'@armailto:N'@ar">N'@ar</A< A>> nvarchar(255),@rc nvarchar(40),@ai uniqueidentifie...
It is no more possible to synchronize this subscription... Any remark will be helpfull cause we did not find anything on the net concerning this error.
Thanks a lot!
Dear Friends,
I am very new to replication, For learning purpose I am trying to setup merge replication. The given setup I am using.
1. Windows 2000 Server + SP4 (Publisher for SQL 2000)
2. Windows 2003 Server + SP1 (Subscriber For SQL 2000)
I am getting a replication error, I have taken this errors details from merge agent on publisher server.
Find enclosed replication error details in the microsoft document file format (.doc). The document is consist of three SQL Server snapshot rather three diffrent errors.
In the pictures you can find the red & white color cross (wrong sign) on replication monitor tab, I don't know why it is appearing. :confused:
Kindly, give me guidance to rectify this error & setup the marge replication between two SQL 2000 Servers.
Hi,
I have set the option as required oon the sequence container and the tasks in it as supposrted ..it fails saying cannot acquire connection ..In all forums they are saying need to check system properties..but i sont have the right to do so
Is there any other alternative to provide a rol;lback on failure or handle this connection error without changing systme setting..
Please Help!!!!
I have created a linked server that connects to "mpp" file, and it connects and opens successfuly returning a list of tables that exists in the linked server to the mpp file.
But the problem i am facing now that whne i write a select statment to get data from the tables in this linked server
select * from linktompp.testmpp.dbo.tasks
such that linktompp is the linked server name
testmpp is the catalog name
tasks is the table name i need to select data from
it shows an error that says
"Could not obtain a required interface from OLE DB provider 'Microsoft.Project.OleDB.11.0'."
"[OLE/DB Provider 'Microsoft.Project.OleDB.11.0' IUnknown::QueryInterface returned 0x80004002: IGetDataSource]"
could anyone tell me the reason of this error
thanks
Below code gives the error "No value given for one or more required parameters"
strSQL = "insert into FILE_UPLOAD(RefNo, FileName, FileType, FileData, FileDescription, Created, CreatedBy) values "
strSQL = strSQL & "(?, ?, ?, ?, ?, ?, ?)"
Dim cmd As New OleDbCommand
cmd.Connection = objCommon.oConn
cmd.CommandText = strSQL
cmd.Parameters.Add("@RefNo", OleDbType.VarChar).Value = ""
cmd.Parameters.Add("@FileName", OleDbType.VarChar).Value = strFileName
[code]....
Hi Friends ,
When i try to copy one table , say for e.g table x from SQL 6.5 to SQL 7.0 it gives me an error that -
'Insert Error , column 46 ( 'Coloumn_name ',DBTYPE_DBTIMESTAMP), Status 6 :
Data overflow .
Invalid character value for cast specification .'
This column on the source server ( SQL 6.5 ) has datatype 'datetime ' with value 8 and is NULL .
Although there are other columns in this table with datatype as 'datetime' as 8 and NULL , they have been copied successfully to the destination table .Only this specific column is giving an error while copying data .
I am using import export wizard to copy data between servers .
Since i have no experience with this , would like to have a solution from you to this problem. It will be great help for me .
Thank you very much ,
Alisha .
The following (VB.Net) code causes exceptions at seemingly random times.
Any suggestions?
Not sure if the problem is in .Net's ODBC support or in Sql Native Client.
If MARS is off, usually after less than 100 loops:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [HY000] [Microsoft][SQL Native Client]Connection is busy with results for another command"
Source="SQLNCLI.DLL"
Turning MARS is on bypasses that error, so it will sometimes survive a thousand or so runs before hitting:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [23000] [Microsoft][SQL Native Client][SQL Server]Cannot insert the value NULL into column 'Number', table 'tempdb.dbo.#TempTable___..(shortened to fit).. _________000000002F3F'; column does not allow nulls. INSERT fails.
Source="SQLNCLI.DLL"
Code here:
(Console Application, empty database,
Visual Studio 2005, .Net 2.0, Windows XP,SQL Server 2005 or SQL Express 2005, Local or Remote)
Code Snippet
Module Module1
Sub Main()
'Dim connection As New SqlClient.SqlConnection("database=TestDB;server=.sqlexpress;Integrated Security=SSPI;") 'Doesn't crash
'Dim connection As New OleDb.OleDbConnection("Provider=SQLNCLI;database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Doesn't crash
'Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Crashes
Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;MARS_Connection=yes") 'Crashes
VBMath.Randomize()
Dim run_count As Integer = 1
connection.Open()
Console.WriteLine("Connected!!")
While True
'connection.Open()
Dim testcmd As New Odbc.OdbcCommand("CREATE TABLE [#TempTable] (Number int PRIMARY KEY)", connection)
testcmd.ExecuteNonQuery()
testcmd.Dispose()
testcmd = Nothing
Dim dtTemp As New DataTable
Dim daTemp As New Odbc.OdbcDataAdapter("SELECT * FROM [#TempTable]", connection)
daTemp.MissingSchemaAction = MissingSchemaAction.AddWithKey
daTemp.Fill(dtTemp)
Dim cbTemp As New Odbc.OdbcCommandBuilder(daTemp)
Dim viewTemp As New DataView(dtTemp, Nothing, "Number", DataViewRowState.CurrentRows)
Dim i As Integer
For i = 1 To 1000
Dim test_number As Integer = CInt(Rnd() * 2000)
If viewTemp.Find(test_number) = -1 Then 'Keep it unique
Dim new_temp_row As DataRowView = viewTemp.AddNew()
new_temp_row("Number") = test_number
new_temp_row.EndEdit()
End If
Next
daTemp.Update(dtTemp)
'daTemp.Dispose()
'daTemp = Nothing
'cbTemp.Dispose()
'cbTemp = Nothing
'dtTemp.Dispose()
'dtTemp = Nothing
'viewTemp.Dispose()
'viewTemp = Nothing
Dim testcmd2 As New Odbc.OdbcCommand("DROP TABLE [#TempTable]", connection)
testcmd2.ExecuteNonQuery()
testcmd2.Dispose()
testcmd2 = Nothing
'connection.Close()
'GC.Collect()
'Console.Write(".")
run_count += 1
End While
End Sub
End Module
Usually the ".Update" triggers the exception, but sometimes the other sql commands do it.
Have tried various experiments with disposing of objects immediately when finished, but no effect.
Opening and closing the connection each loop seems to delay the errors, but it still happens eventually.
Hi,
I am using Microsoft SQL Server 2000 Desktop Engine (MSDE 2000). When I restart the SQL Service, it fails to do so. I have tried running the service in command prompt & got the following error:
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
Kindly help as it is quite urgent & I can not afford to loose any data. Thanks.
Hi,
I have designed a report in sql server reporting services using SQL Server Bussiness Intelligence Studio tool. I have applied sorting feature for a column. Sorting facility is working fine when there is one or more records.
Its giving "object required" Java Script error When there is no record. Kindly help me how to fix this issue.
Regards
Sagayaraj R
I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
Hi,
I have created a few packages and i want to execute this in a sequence so I created a wrapper/parent package and added all the other packages as child Package using the Execute Package Task. These packages are file system based packages. I am executing the wrapper/parent package from a web page which will execute all the child packages. All is well and works fine when I choose the TransactionOption as "Supported" in my wrapper/parent package but when I choose the TransactionOption as "Required" in my wrapper/parent package I get the following error
Error Occurred: The package is failed due to following: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.".
What I am doing is connecting to 3 DB in the same server and doing some data manipulation. The MSDTC is running in the Target SQL Server and also the DTC Server in my Local is started and running. What else could be the problem.
Thanks in advance for any and all help
As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA
it is possible to grant all privilege (CRUD) to specified table to user. But, now, i want to grant all privilege (CRUD) of all tables, views, sp, ... of database to the user. is it possible?regards,
View 5 Replies View Related