Hello,
I have a report in sql that i would like users in sharepoint to be able to subscribe to, however when i try to subscribe to the report i get the following error -
The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting).
Any ideas?
Many thanks.
Hello,
I have a report in sql that i would like users in sharepoint to be able to subscribe to, however when i try to subscribe to the report i get the following error -
The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting).
Any ideas how i could solve this error?
Any help would be much appreciated, thank you.
Hi !
I am subscribing the report from the report manager in File Share mode.But the Report is not getting stored in the specified location after the Schedule time. This would be the problem the with Reporting Configuration,Because the trigger run status is blank in report manager.Could anyone help me out in this issue.
Hi there,
Is there anyway of subscribing to a report to run for every 1 hour between the times off 9am to 5pm only ?
I cant seem to find the ability to set time intervals anywhere
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
OK... I'm running out of things to try.
I have SQL Server 2005 SP2 installed and Reporting Services Addin configured. I am trying to publish a report from BIDS to SharePoint... but a box continues to pop up asking me for credencials.
What am I doing wrong? I have reviewed all the web.config files as per an earlier post referenced, but I only see one entry in the config file for the location tag. However, I did see this tag in two config files... not certain if that is something I should be concerned with?
I'd really like to just get a sample report up on the Sharepoint Server so I can move forward.
Can anyone help?
I'm not sure this is possible, but... I was asked to write a SQL Reporting Services Report that reports on a SQL table that is joined to a Sharepoint Table. In trying to look up how to do this, I'm not finding any how-to posts. Is this possible and if so, could you point me in the direction of a step-by-step how -to white paper?
Thanks,
Jennifer
I have two publications on a SQL Server 2000 database.
I am able to create two subscriptions from another SQL Server 2000 database
and synchronize both in succession.
However when I try to repeat this going from SQL Server 2000 to SQLCE 2.0
it fails. The first goes OK. The second fails.
I get error 80004005, 28521 (The SQL Server CE database is already enabled for publication.
Is it possible to do what I am trying to do on CE?
The reason I have 2 publications is because the first is non-filtered and goes very fast via bcp files when reinitialized.
The second is dynamically filtered and not as fast. Breaking them up makes reinits go much faster.
My code is included below.
Thanks
Ed Santosusso
esantosusso@omicron.com
--------------------------------------------------------
// Create and initialize the Replication object
hr = CoCreateInstance(CLSID_Replication, NULL, CLSCTX_INPROC_SERVER, IID_ISSCEMerge, (LPVOID *)&CEMerge);
CEMerge->put_InternetURL(L"http://myiisserver/sqlce20/sscesa20.dll");
CEMerge->put_InternetLogin(L"<userid>");
CEMerge->put_InternetPassword(L"<password>");
CEMerge->put_Publisher(L"mysqlserver");
CEMerge->put_PublisherDatabase(L"MyDataBase");
CEMerge->put_Publication(L"Publication1");
CEMerge->put_PublisherSecurityMode((REPL_SECURITY_TYPE)DB_AUTHENTICATION);
CEMerge->put_PublisherLogin(L"sa");
CEMerge->put_PublisherPassword(L"mypassword");
CEMerge->put_PublisherNetwork((REPL_NETWORK_TYPE)DEFAULT_NETWORK);
CEMerge->put_Subscriber(L"TestReplAndMerge");
CEMerge->put_SubscriberConnectionString
(L"Provider=microsoft.sqlserver.oledb.ce.2.0;Data Source=\mydatabase.sdf");
CEMerge->put_Distributor(L"mysqlserver");
CEMerge->put_DistributorNetwork((REPL_NETWORK_TYPE)DEFAULT_NETWORK);
CEMerge->put_DistributorSecurityMode((REPL_SECURITY_TYPE)DB_AUTHENTICATION);
CEMerge->put_DistributorLogin(L"sa");
CEMerge->put_DistributorPassword(L"mypassword");
CEMerge->put_HostName(L"some host name");
CEMerge->put_ExchangeType((REPL_EXCHANGE_TYPE)BIDIRECTIONAL);
CEMerge->put_Validate(NO_VALIDATION);
bool NewFile = false;
// see if we need a file
if (FileExists(L"\mydatabase.sdf") == false)
{
hr = CEMerge->AddSubscription(CREATE_DATABASE);
if (!SUCCEEDED(hr))
{
ShowMergeErrors(L"Add Subscription failed",CEMerge);
return 0;
}
NewFile = true;
}
hr = CEMerge->Initialize();
if (!SUCCEEDED(hr)) {
ShowMergeErrors(L"Static Merge Initialize failed",CEMerge);
return 0;
}
hr = CEMerge->Run();
if (!SUCCEEDED(hr)) {
ShowMergeErrors(L"Static Merge Run failed",CEMerge);
return 0;
}
// Destroy the Replication object
if (CEMerge)
CEMerge->Release();
// set up for Second Merge
// Create and initialize the Replication object
hr = CoCreateInstance(CLSID_Replication, NULL, CLSCTX_INPROC_SERVER, IID_ISSCEMerge, (LPVOID *)&CEMerge2);
CEMerge2->put_InternetURL(L"http://myiisserver/sqlce20/sscesa20.dll");
CEMerge2->put_InternetLogin(L"<userid>");
CEMerge2->put_InternetPassword(L"<password>");
CEMerge2->put_Publisher(L"mysqlserver");
CEMerge2->put_PublisherDatabase(L"MyDataBase");
CEMerge2->put_Publication(L"Publication2");
CEMerge2->put_PublisherSecurityMode((REPL_SECURITY_TYPE)DB_AUTHENTICATION);
CEMerge2->put_PublisherLogin(L"sa");
CEMerge2->put_PublisherPassword(L"mypassword");
CEMerge2->put_PublisherNetwork((REPL_NETWORK_TYPE)DEFAULT_NETWORK);
CEMerge2->put_Subscriber(L"TestReplAndMerge");
CEMerge2->put_SubscriberConnectionString
(L"Provider=microsoft.sqlserver.oledb.ce.2.0;Data Source=\mydatabase.sdf");
CEMerge2->put_Distributor(L"mysqlserver");
CEMerge2->put_DistributorNetwork((REPL_NETWORK_TYPE)DEFAULT_NETWORK);
CEMerge2->put_DistributorSecurityMode((REPL_SECURITY_TYPE)DB_AUTHENTICATION);
CEMerge2->put_DistributorLogin(L"sa");
CEMerge2->put_DistributorPassword(L"mypassword");
CEMerge2->put_HostName(L"some host name");
CEMerge2->put_ExchangeType((REPL_EXCHANGE_TYPE)BIDIRECTIONAL);
CEMerge2->put_Validate(NO_VALIDATION);
if (NewFile)
{
hr = CEMerge2->AddSubscription(EXISTING_DATABASE);
if (!SUCCEEDED(hr))
{
ShowMergeErrors(L"Add Subscription failed",CEMerge2);
return 0;
}
}
hr = CEMerge2->Initialize();
if (!SUCCEEDED(hr)) {
ShowMergeErrors(L"Tech Merge Initialize failed",CEMerge2);
return 0;
}
hr = CEMerge2->Run();
if (!SUCCEEDED(hr)) {
ShowMergeErrors(L"Tech Merge Run failed",CEMerge2);
return 0;
}
// Destroy the Replication object
if (CEMerge2)
CEMerge2->Release();
Hi,
I am trying to integrate SQL SERVER 2005 ( Version 9.00.3033.00) with sharepoint server using the Add-in. In Add Application Management -- > Reporting Services Trusted Accounts, When i provide the credentials it is giving a message
Some or all identity references could not be translated.
I have installed the latest SQL SERVER 2005 from http://www.microsoft.com/downloads/details.aspx?FamilyID=4E50BE6E-3F92-4552-A78C-B3BE1D94D5DA&displaylang=en
Am i missing something ?
Thanks & Regards
Kiran Kumar
Not 100% sure if this is the right forum, but its the one i'm mostly used to ...
We run one one machine Sharepoint Services 3.0, we've added the webpart cab file. When we add the Report explorer that points to the second server running SSRS this works fine. When we add the Report Viewer that point to that same server running SSRS it works fine.
But, when we link to output of the Explorer to the Viewer, or vice versa, the page comes corrupt and we have to hide or delete one of the components.
Any ideas, i've been looking for some articles, found a hotfix but they all were on v 2.0 .....
Kind Regards
Hi All,
I am deploying my reports on to the report viewer on a Sharepoint site. I wanted to know how to handle exception in the reports here. I was looking for exception handling in SSRS, but most of them are given with respect to displaying reports in ASP.NET pages. Is there any way I can configure Report Viewer to display friendly error messages instead of the vague error messages displayed from SSRS.
Thanks,
S Suresh
Hello,
I'm trying to set up SharePoint Integration for our report server. The setup we have is: 1. SQL server hosting the SharePoint databases and the Reporting Server, 2. SharePoint web front end hosting all SharePoint services. I've installed the reporting services SP2 on the SQL server and the reporting services add-in on the SharePoint server.
I configured the report server following the directions here: http://download.microsoft.com/download/f/d/c/fdcb3a53-0cb1-4e67-a1b6-45b89b3c59cf/readme_rsaddin.htm and here: http://www.sharepointblogs.com/helloitsliam/archive/2007/02/21/19801.aspx
Everything seems to be set up correctly, but when I open the Reporting Services Configuration Manager, the SharePoint Integration option shows the error, "The report server cannot access setting in the SharePoint configuration database. Most likely, the Windows SharePoint Services object model...."
I do have WSS 3.0 installed on the report server.
When I look in the logs on the report server it says the login failed for the account I have set as the Windows Service Identity however, when I look at the logs on the SharePoint server it shows that it is granting the account read and write access to each of the SPWebApplications I have set up.
Any suggestions?
Thanks,
Cynthia
Hello,
We have set up reporting in sql 2005 so that we can report from a MOSS 2007 list. At the moment the report is created with all the data from within the list. How could i create a filters so that the user can generate a report by name and date?
Thanks.
hi,
when i try to execute the rpdataextraction parser, i am getting the following message - Unable to access site collection: User cannot be found.
it will be of immense help for me if any one helps me on this or directs me to right resource.
thanks
Hi,
I get the following error when I am trying to deploy Report from Visual Studio Report Designer.
SRSS is configured in SharePoint integration mode. Configuration is mentioned below.
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://rbddspsdev2:44887/.
------------------------------
ADDITIONAL INFORMATION:
Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized. (System.Web.Services)
------------------------------
BUTTONS:
OK
Configuration is as follows.
Web front end server.
MOSS 2007 Standard edition 64 bit.
SQL Reporting Service Add in 64 bit.
SQL Server
MS SQL server 2005 32 bit with sp2.
Reporting Services configured.
WSS 3.0 32 bit required for configuration, of SRSS in integrated mode.
Windows service and web service are both running under a domain account. The account is a SharePoint Admininstrator. The account is also in Administrators, Reporting Server user and Web service group and also has a dbo rights on database.
Is it possible to connect to the Report Viewer web part in SharePoint? This is the SharePoint integrated guy. I am displaying a report. I'd like to have links in the report that cause a sub-report or even a custom web page to open in another web part on the same page.
Is this possible?
Thanks.
J
We are using xml to pull data from a custom sharepoint list into sql 2005. We have set a parameter that allows the user to filter the data by surname, however when the user tries to filter the list the drop down box brings up a list of every record, so there are duplicate entries for each surname.
Is there a way of filtering this so that there is only one instance of the users surname instead of it showing all the records?
Any help would be much appreciated.
Ive seen this asked all over but am yet to find a fix for my case.
I have 1 SharePoint 2007 server
1 SQL 2005 SP2 server with Reporting services running
Reporting services is configured and running all with ticks in SharePoint integration mode, the reporting services section shows up in Central Admin ok.
When I try to access reporting services I get the error :
http://reports.domain/reportserver
Report Server has encountered a SharePoint error. (rsSharePointError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors Looking thru the logs I get the error :
w3wp!library!d!04/04/2008-13:54:20:: Call to GetItemTypeAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListParentsAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListChildrenAction(/, False).
w3wp!library!d!04/04/2008-13:54:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.internalFindObjectsNonRecursive(String wssUrl, CatalogItemList& children)
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.FindObjectsNonRecursive(String wssUrl, CatalogItemList& childList, Security secMgr, IPathTranslator pathTranslator, Boolean appendMyReports)
--- End of inner exception stack trace ---
I setup a new website called RS Web Site in IIS on the SQL box, I then set this in the Configure Report Server. I have made sure Annonymous access is off.
Does anyone know how on earth I can resolve this ..
Many Thanks
Marcus
Has anyone been successful in configuring the Hyperlink Target property in the SSRS Sharepoint Web Part? I've tried every setting, including _blank, yet the behavior does not change.
Am I doing something incorrectly or is this not implemented correctly?
Hi guys
I seem to be having a bit of trouble deploying my reports from my Reporting Services Project in Visual Studio to my Sharpoint server.
Both the reporting server and sharepoint are installed on the same server.
The settings within my reporting server are as follows (where report is the site name):
TrargetDataSourceFolder - https://server/Report/Shared Documents/DataSources
TrargetReportFolder - https://server/Report/Shared Documents
TrargetServerURL - https://server/Report
I have not yet changed over all my reports to use fully qualified urls yet. As we have multiple domains in which the reports need to go through before they hit the production server and i haven't yet decided how i am going to handle the issues of the reports requiring fully qualified addresses (if someone has a way i would love to know).
I was getting the following error when i tried to deploy the projects but i delete all extensions from the blocked file types and that error went away. I can only guess that there was a file type it didn't like.
Error - "The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators."
When i deleted all the file extensions i now get the following error.
Error - "File Not Found."
Just wondering if anyone has had any success with visual studio and sharepoint deployment or run into this problem.
Thanks
Anthony
I have a Reporting Services report available in a Windows Sharepoint Services webpart. The report is too large to display in the webpart window requiring the user to use the scroll bars. Is there any way to reduce the size of the report so that fits completely within the webpart without using scroll bars?
Thank you.
David
I have the following setup:
Windows 2003, Sahrepoint 2007, Report Services Addin (v9.00.3033) on one machine
Windows 2003, SQL Server 2005 SP2 CTP (v9.00.3033) on another.
When I install the Report Service addin on the Sharepoint machine, the install goes fine; however, when I go to the Application Management screen in Sharepoint Central Admin I don't see a "Reporting Services" section or a "Manage integration settings" link.
Any thoguths?
Thanks,
Atul
Hi all,
I am new to replication and have a few questions.
1) Are there any "hooks" available to insert processing when a subscriber is about to copy data from a replicating site?
2) Is it possible for a subscriber to change only his local copy of the data - without replicating the changes back to the publisher?
I realise that once the data changes in one place it isn't really replicated anymore, and I realise that my limited knowledge of the subject might well mean I'm not even asking the right questions. Therefore, I shall try to describe as best I can my scenario.
I wish to use many servers for transactional input (to distribute the workload) and use replication to publish the inputted data to a subscribing central site. One of the tables I wish to replicate has an identity column as primary key, but the records should otherwise be unique - i.e. no two records should differ only in the value of the key. Another table, which should also be replicated, uses this id value as a foreign key.
I can use the identity increment and seed to guarantee no key violations will occur when copying data to the central server. However, there is another issue: Several servers can create the same record but with different id values.
I need to "merge" such records by deleting duplicate entries in the table with the identifier as primary key, and update the foreign keys correspondingly. To clarify (I hope!), here's an example of what data I might have on the central site after copying data from two input sites:
TRANSACTION table
amount = 200, metadata_id = 1001 // Replicated from server INPUT_1
amount = -117, metadata_id = 2001 // Replicated from server INPUT_2
METADATA table:
id=1001 Actitiy=Sales, Country=USA
id=2001 Activity=Sales, Country=USA
What I would like is basically for the central site to identify that metadata 2001 is really the same as metadata 1001, update the foreign key in the TRANSACTION record accordingly and not import (or delete, if this "merging" is done in a post-treatment) the duplicate metadata record.
If anyone can offer any advice on how to achieve this I would appreciate your input.
I need add an report of type "Power View" in Web Part of Site of Sharepoint.What is category chose in Web Parts to add an report of type Power View ?My objective is create an tree menu with links to specific sites (created for me) that have web parts with "Power View".
View 1 Replies View RelatedI have developed the SSRS report and deployed them on SharePoint 2013 BUt when I run report through broswer It take long time to execute.
View 3 Replies View RelatedI encounter this error when user try to subscribe using email delivery
to one of the report. I have configured the Reporting Services to use
Sharepoint integrated mode. This user is a regular user that has read
access to the report item.
Below is the message detail:
A subscription delivery error has occurred. (rsDeliveryError)
A subscription delivery error has occurred. (rsDeliveryError)
One of the extension parameters is not valid for the following reason:
The account you are using does not have administrator privileges. A
subscription cannot be created for [emailaddress].
(rsInvalidExtensionParameter)
Is it true that user needs to have administrator privilege in order to
subscribe for report? I don't think so, right?
Regards,
Gunady Ng
I replied to an thread in the pre-2010 forum before I realized the forum I was in...
I'm using Visual Studio 2008 to Design my SSRS reports. The report viewer is using SharePoint 2010 SP1 integrated mode.
I am using a conditional statement to determine which report to drill to based on the SSRS textbox's column.
=iif((Fields!Type.Value =
"Total")OR
(Fields!Type.Value ="Variance - (F)/U"),"DivisionSpendingReport","DivisionSpendingReportDetail")
Works fine in Visual Studio. Once deployed to SharePoint though, the drill through returns an error that says report can't be found. So I added the .rdl to the conditional statement in the report Design.
=iif((Fields!Type.Value =
"Total")OR
(Fields!Type.Value ="Variance - (F)/U"),"DivisionSpendingReport.rdl","DivisionSpendingReportDetail.rdl")
It now works in SharePoint but not in Visual Studio...
Do I need to keep adding and removing the ".rdl" in order to make any changes to this report???!!!
I've been running around in circles all afternoon trying to create one simple report using Reporting Services (with latest SP2 installed) and SharePoint 2007. To the best of my knowledge, I have everything configured correctly:
When I access http://<server>/ReportServer, I see the server name of my SharePoint site.
When I click on the name of my SharePoint site, it shows me the directory structure I have created within my SharePoint Site
When I drill down in the directory, I can ultimately see the forms I created in my forms library (created via InfoPath 2007).
The next step is to create one simple report from the data in one of these forms libraries and a report on all the items within a form library. I'm stuck at the first step of creating a report, namely what to enter as the Data Source and the connection string. With a SQL database this isn't an issue.
How does one create a data source that will allow reporting over SharePoint content with the setup described above? And, if you have information that is found in the SQL Books Online, please be kind and post links so others know where to find this information.
whenever I try to create a PowerView report on an existing powerpivot- excel sheet I get following error:"An error occurred while loading the model for the item or data source 'xxx'. Verify that the connection information is correct and that you have permissions to access the data source." Error details:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://intranet/PowerPivot/PowerPivot-Galerie/Mappe1.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message>
[code]...
When I try to open the PowerPivot sheet form Power Pivot Gallery and click on any filter I receive following message: An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh: PowerPivot Data.
Hello all,
I'm new with SP v3 and the Reporting Services of SQL Server 2005.
I did a prototyp report and show it with "SQL Reporting Services
Report"-WebPart, but I can't find the WebParts Report Viewer and
Explorer in the WebPart Gallery.
Please, could somebody give me a clue where the problem could be, or
how I could isolate the problem area.
Cheers
Marc
Hi,
I got the following exception from the code listed below:
System.Web.Services.Protocols.SoapException occurred
Message="The operation is not supported on a report server that is configured to run in SharePoint integrated mode. ---> The operation is not supported on a report server that is configured to run in SharePoint integrated mode."
Source="System.Web.Services"
Actor="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Lang=""
Node="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Role=""
StackTrace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.PerformancePoint.Planning.Client.Common.ReportServer.ReportingServices2005.ListChildren(String Item, Boolean Recursive) in c:Officedev14ppsplanningclientCommonReportingServices2005.cs:line 1001
at Microsoft.PerformancePoint.Planning.Client.Common.DataAgent.RetrieveDirectoryStructureFromReportingServices(Object caller, Object parameters) in c:Officedev14ppsplanningclientCommonAgentsDataAgent.cs:line 2027
InnerException:
The code is like:
ReportingServices2005 reportingServices = new ReportingServices2005();
reportingServices.Url = "http://haileizws32b:8080/ReportServer/ReportService2005.asmx";
reportingServices.Credentials = System.Net.CredentialCache.DefaultCredentials
CatalogItem[] items = reportingServices.ListChildren("/", true); <== This code throws the exception.
I can browser and view the items from both Sharepoint site and ReportServer site without problem.
Can you tell me what is wrong?
Thanks a lot!
I was working for 2 days on integrating reporting services with MOSS 2007.
The problem i faces was to create a data source for the
uploaded report (Not created using a wizard ) that will connect
me to the SQL server.
As i clicked on the arrow near the uploaded report to manage the data source, i found no
data source for this item.
I would be pleased to know the howto create this data source and where.
Best Regards,
Lana
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.