Subsystem 'SSIS' Could Not Be Loaded (reason: This Function Is Not Supported On This System)
Apr 30, 2008
Hi, I am trying to create a maintenance plan on an MSX server and push it out to a TSX server. When I try to run the job on the TSX server it goes into suspended status.
If I look in the SQLAGENT log I see the following error
2008-04-30 15:04:11 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:08:19 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:09:28 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:27:36 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
2008-04-30 15:35:13 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:50:27 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
my sql info is
Microsoft SQL Server 2005 - 9.00.3239.00 (X64)
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
any advice would be helpful
View 6 Replies
ADVERTISEMENT
Jul 20, 2005
DB is 150GB and I cannot take it offline long enough to apply logs to a back up.I am moving from one sub storage system to another.Any mirroring ideas?Thanks
View 1 Replies
View Related
Mar 7, 2006
Greetings all,
After moving all my packages to a new server, win2K3, SQL2k5, non of the SSIS packages run. They all ran fine on the other server.
The error is
"2006-03-07 13:09:38 - ! [LOG] Step 1 of job 'ExportXML' (0x4E0C7495EFE4034FA6EF94B7C7F77262) cannot be run because the SSIS subsystem failed to load. The job has been suspended"
These packages ran perfectly on the old system.
Running the package manually, using DTExec or from the Saved Packages tree in SQL is fine.
Package is saved in SQL.
Any ideas?
View 3 Replies
View Related
May 1, 2008
Environment: SQL Server 2005 Enterprise Edition x64, 3 server cluster. Two active servers with seperate instances and one passive server. SQL Server was installed on the two active servers.
Problem: When I fail over either of my instances to the passive server in the cluster my maintenance jobs fail to run and there are error messages in the application event viewer "SSIS Subsystem failed to load". I am guessing that all of the needed components are not installed on the passive server? Is this a close guess? If so, exactly what components are missing and do you have to have another license to install them?
Thanks in advance for any advice.
View 2 Replies
View Related
Aug 4, 2006
What SSIS components must be loaded onto the server?
To run an SSIS ETL program, exactly what executable, components, programs, etc. must reside on the server that will be running the program. Our developers write an test their ETL programs locally, on their desktops or laptops, but must upload the scripts to the production server for execution. Obviously, they are not going load Visual Studio and SQL 2005, etc. up to the server just to run the scripts (tho SQL 2005 may be on the same box as one of the DB engines used for ETL).
Any info would be appreciated.
View 7 Replies
View Related
May 4, 2004
Hi guys
I'm trying to upload to my SQL DB
in my web.config file I have:
<appSettings>
<add key="MM_CONNECTION_HANDLER_trustnetConn" value="default_oledb.htm" />
<add key="MM_CONNECTION_STRING_trustnetConn" value="Provider=SQLOLEDB.1;Password=****;Persist Security Info=True;User ID=****;Initial Catalog=Trustnet;Data Source="192.194.25.211/>
<add key="MM_CONNECTION_DATABASETYPE_trustnetConn" value="oledb" /><add key="MM_CONNECTION_SCHEMA_trustnetConn" value="" />
<add key="MM_CONNECTION_CATALOG_trustnetConn" value="" />
</appSettings>
i'm trying to make a new connection
Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("MM_CONNECTION_STRING_trustnetConn"))
so I can upload files to it
but I keep on getting the error
System.ArgumentException: Keyword not supported: 'provider'.
any ideas
cheers
View 5 Replies
View Related
Jun 1, 2015
while working on deployment to production server of an SSIS project, I have noticed that development priject has "disappeared" from my development machine which, obviously, was not my intention, at all. I now get the error prompt saying this:
what am I suppose to do in order to RESTORE it on devel machine like it used to be?
View 7 Replies
View Related
Sep 28, 2007
Hi All!
Could You comment the next situation:I'm configuring my TableAdapter just like Scott Mitchell does in his tutorialhttp://www.asp.net/learn/data-access/tutorial-70-vb.aspxThe only principal difference is that I need Insert/update and deletemethods to be generated (His aim is only SELECT).I'm also using analytic function (ROW_NUMBER) and I'm also gettinwarning “The OVER SQL construct or statement is not supported.� Yousay then that it could be ignored. But, in this case statements tomodify data (insert/update and delete) aren't being generated, thoughafter warning SQL command is executed without errors.
So, the question is obvious - why does this warning occur and how mustI perform configuration of TableAdapter based on SQL query withanalytic function?
View 1 Replies
View Related
May 23, 2008
I am writing a Reporting Services report pointed at an Analysis Services data cube, and in order to have more control over the MDX, I needed to switch my SSRS data source from the .NET Provider to the OLEDB provider (from ".NET Framework Service Provider for Analysis Services" to "OLEDB Provider for Analysis Services", that is). I'm also entering my MDX in as an expression in the data source.
I noticed that when I summarize this data in the table footer on the report, the summary values that use the Aggregate function (=aggregate(fields!fieldname.value) for example) are blank.
I'm assuming that since the OLEDB provider is an "older" data provider for SSAS data and the Aggregate function was new in 2005 with the .NET provider, the OLEDB provider doesn't support the Aggregate function. I was wondering if someone could confirm that this is the case?
Also, is there any other functionality that is not supported by OLEDB that would be supported by the newer .NET provider (aside from the ability to generate fields, parameters, and use the MDX query designer, of course)?
Thanks.
View 4 Replies
View Related
Aug 18, 2007
I have SQL Server 2005 Developer Edition. And my operating system is Windows Vista.
I have written a procedure in C# and deployed it on SQL Server. However when i try to run it i get the following error.
System.Data.SqlClient.SqlException: The locale identifier (LCID) 16393 is not supported by SQL Server
Also I tried using same procedure in Windows XP machine and it workd fine. Can anyone help me what could be the problem?
View 12 Replies
View Related
Aug 11, 2015
I have a job that runs an SSIS package. The job seems to be able to run through the package successfully, but at the end it errors out saying "The binary code for the script is not found. ...". The script referred to is at the beginning part (not the very first step) and should already be run.
The thing is, I can manually run this package on the server or visual studio without any problem. Also this job has been run on a regular basis without any issues on our old SQL 2008. I'm migrating this to Amazon Cloud SQL 2014.
Together with this package are other two very similar ones. They all work fine. I just can't figure out what can be wrong with this one.
View 4 Replies
View Related
Feb 8, 2008
I have searched extensively and not been able to find a solution to this problem.
The problem:
We have one SSIS package will sometimes 'finish' executing (or crash from a .NET exception) when it certainly has not made its way through all of the data flow components. There are no SSIS error messages, no warnings, and it never happens at the same location in the package's pipeline. The only thing that is instantly visible is a command window that flashes on the screen and disappears too quickly to see anything,.
Sometimes the package does actually complete without any problem, but most of the time, it does not.
What we see:
If the packages is being run through the "Execute Package Utility" (by double clicking the dtsx file), after a bit, a command window flashes on the screen and instantly disappears (no text is visible), then the €œExecute Package Utility€? disappears. The event viewer of the machine then shows:
Source: .NET Runtime 2.0 Error
Category: None
Event ID: 1000
Type: Error
Description: Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module dtspipeline.dll, version 2005.90.3042.0, stamp 45cd721f, debug? 0, fault address 0x00019a66.
If the package is running within visual studio, again the command window flashes on the screen, then the "Execution has completed" prompt appears, but any "running" component remains Yellow (no red), both within the data flow and control flow (we do not have any event handlers set up). Neither our SQL Log provider, nor the "Execution Results" tab in visual studio show any type of error message... all SSIS messages just stop right in the middle of the many OnPipelineRowsSent log events (so there is no PackageEnd log event when this happens). The event viewer on the machine contains no useful messages when running within visual studio.
And other packages:
Are fine. This is only the case for this one package... we have nearly a dozen other packages, all very similar in design, that complete without issue.
We have also tried re-creating this troublesome package from scratch with no avail.
<!--[if !supportLineBreakNewLine]-->
About the package:
The Data Flow is pulling rows from 3 different external SQL data sources (400k-500k rows total), sorting and merging the rows, performing some basic lookups, then SCD'ing the results. This Data Flow is executed multiple times within 2 nested for loops (these nested loops give us particular dates, i.e. years 2000 through 2008, then months 1 through 12 for each year). There is not a single script task in the package. The problem seems to happen most as the data is being pulled from the sources and merged together, but it is not limited to this area.
<!--[if !supportLineBreakNewLine]--><!--[endif]-->
The environment:
We€™ve tried to use multiple machines with the same result. The current machine specs are as follows:
SQL Server 9.0.3042 (SP2)
Windows Server 2003 R2, Enterprise x64 Edition, SP2
3.00GHz x 16 processors, all 64 bit
63.5 GB of RAM
Over 1 terabyte of hard disk space
.NET 2.0.50727.42
The package was designed using:
Visual Studio 2005 with SP1
Microsoft SQL Server Integration Services Designer - Version 9.00.3042.00
Anyone have an idea? Thanks in advance.
View 6 Replies
View Related
May 19, 2006
Using SQL Server Business Intelligence Development Studio, when I try to create a new OLEDB connection manager and I try to connect to the SQL 2005 DB, I get an error message saying that "Client is unable to establish connection Encryption not supported on the client"
This is ONLY in SQL Server Business Intelligence Development Studio!
If I connect to the same server using SQL Server Management Studio and using server type Integration Services, everything works just fine.
However this way I cannot create a working SSIS package from the client, if not working locally on the server, which is a bit nonsense.
Any suggestions?
View 1 Replies
View Related
Nov 18, 2014
As part of an ETL conversion I have dataflow task created that copies data from one table to another, we use it as a way to rename fields and change data types. What is strange is that the OLE DB SQL destination has not issue if I copy data from an int to smallint and in another case from an int to a numeric field and it runs fine. So I decided to test using a SQL Server Destination as I heard it may be faste that using OLE Db.
No I am getting the following error
Error: 0xC02020F5 at Insert into TRANSACTION, SQL Server Destination [32]: The column "ID" can't be inserted because the conversion between types DT_I4 and DT_NUMERIC is not supported.
Error: 0xC02020F5 at Insert into TRANSACTION, SQL Server Destination [32]: The column "ID1" can't be inserted because the conversion between types DT_I4 and DT_I2 is not supported.
I do understand the error but not why it runs fine using the OLE DB but when running it through SQL Server Destination I get this error.
View 2 Replies
View Related
Feb 14, 2008
I'm looking at building an SSIS workflow to integrate new XML product data from our supplier (they're switching to XML instead of the Current MS Access database they use). They're using a schema based on the OAGIS structure. When I try to load a Data Flow Task with the XML file, to attempt to parse it, and I specify the XSD schema they have provided, SSIS errors out by telling me:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [Data Import [1]]: The component "Data Import" (1) was unable to process the XML data. Substitution Groups not supported. See element "Dimensions" with "substitutionGroup=http://www.openapplications.org/oagis/9: Dimensions".
------------------------------
ADDITIONAL INFORMATION:
Pipeline component has returned HRESULT error code 0xC02092B0 from a method call. (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
Is there any way at all to get around this, or am I screwed? As I said, this data is provided to us by our supplier - we have no control over it, but I am looking to pull the data from XML and put it into a regular SQL table which I am in the process of defining - we have a large traffic e-commerce site and obviously cannot use XML as the "back-end".
View 3 Replies
View Related
Mar 24, 2006
I have a scheduled job that has been running fine for 2 years, but this week I keep getting the following error:
0x469A75B7998F8142A910FA7E9983CCDF
has caused an exception in the CmdExec subsystem and has been terminated.
the enterprise manager shows that the job failed, but the app still shows up in task manager.
any suggestions?
thanks
View 1 Replies
View Related
Apr 10, 2006
Hello,
I currently have a Transactional Log reader agent failing with the below error:
The process could not execute 'sp_replcmds'
Error: 14151, Severity: 18, State: 1
SQL Server Assertion: File: <logscan.cpp>, line=2223
Failed Assertion = 'm_noOfScAlloc == 0'.
Stack Signature for the dump is 0x24642FE5
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=1985
Failed Assertion = 'startLSN >= m_curLSN'.
Stack Signature for the dump is 0xD7150BD4
Now, I understand that SP4 is supposed to fix a similar issue. SP4 has been installed and the errors keep happening. I do notice that the hot fix mentions different line numbers than the above errors. Does anyone know if this is a new bug? If not can someone explain the fixes to me, thanks,
Tech Drone.
View 3 Replies
View Related
Feb 13, 2008
Greetings,
I need to create a function that is available across all databases. This function is for exchange rate conversions and will be used extensively. I'd prefer not having to call it by it's full four-part name and just make it available everywhere on the server.
Is there a way to create such a function? Where is it stored?
Rob
View 5 Replies
View Related
Jul 15, 2005
In SQL 2000 for Procedures
View 5 Replies
View Related
Feb 1, 2008
We're building a simple logging facility and would like to systematically determine the name of the current T-SQL object(i.e., the procedure name or function name) to provide this as a logging parameter. For example, in procedure FooBar, I'd like to be able to call a system function that will return 'FooBar', the name of the current object. Does such a feature exist?
Thanks - Dana
View 3 Replies
View Related
Dec 8, 2007
Hi,
I am using Sql Server 2005 as the database management and Access 2003 as the front-end. In the database, I intend to give different views of tables to different users. That's why I used suser_sname system function, which returns the windows login id and authenticates users to see different records in the same view. What I want to do in Access is, allowing some specific users to be able to do update, insert and delete operations through a form based on this view (which only depends on 1 table). However, Access tells me that "the recordset is not updateable". In order to be able to change records, I tried to create new index for the view in Sql Server, which failed giving "Sql Server, Error number:1949" and telling me that it fails since suser_sname yields non-deterministic results. The strange thing is that when I open VB Editor in Access and write a simple update code within this form, it updates both the view and the table in the database. My question is: How can I do update, delete and insert operations on the form directly? Is there a way to do the authentication without using a nondeterministic function in Sql Server or using the front-end Access 2003? Maybe a function similar to the current_user function in Access can do that, I don't know.
It's been a long question but I desperately need the answer. Any thanks will be appreciated.
View 6 Replies
View Related
Mar 16, 2007
Could anyone shed some light on the syntax of accessing system function on a linked server?I'm trying to get the recovery models of databases on a linked. However using databasepropertyex locally generates wrong results.e.g. select databasepropertyex(name, 'recovery') RecoveryModel from [server/databasename].master.dbo.SysDatabases I tried select [server/databasename].databasepropertyex(name, 'recovery') RecoveryModel from [server/databasename].master.dbo.SysDatabases which does not work. Thanks.
View 1 Replies
View Related
Mar 4, 2008
I created a clr proc that gets the most recent file within a directory based on the creation time property, see code below. I have attempted to replicate this within a clr scalar valued function in order to assign the resulting value to a variable within SQL server. I am getting the error message:
Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user-defined routine or aggregate "clr_fn_recentfile":
System.InvalidOperationException: Data access is not allowed in this context. Either the context is a function or method not marked with DataAccessKind.Read or SystemDataAccessKind.Read, is a callback to obtain data from FillRow method of a Table Valued Function, or is a UDT validation method.
System.InvalidOperationException:
at System.Data.SqlServer.Internal.ClrLevelContext.CheckSqlAccessReturnCode(SqlAccessApiReturnCode eRc)
at System.Data.SqlServer.Internal.ClrLevelContext.GetCurrentContext(SmiEventSink sink, Boolean throwIfNotASqlClrThread, Boolean fAllowImpersonation)
at Microsoft.SqlServer.Server.InProcLink.GetCurrentContext(SmiEventSink eventSink)
at Microsoft.SqlServer.Server.SmiContextFactory.GetCurrentContext()
at Microsoft.SqlServer.Server.SqlContext.get_CurrentContext()
at Microsoft.SqlServer.Server.SqlContext.get_Pipe()
at clr_fn_recentfile.clr_fn_recentfile.clr_fn_recentfile(SqlString Filepath)
After trying to troubleshoot this I am aware that this error is rather generic and have not been able to find any specific documenation regardint the use of file system objects with clr functions. I am at a loss. Any help would be appreciated!
STORED PROC CODE WORKS
Code Snippet
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports System.IO
Partial Public Class clr_recentfile
_
Public Shared Sub clr_recentfile(ByVal Filepath As SqlString)
Dim strFile As String
Dim sp As SqlPipe = SqlContext.Pipe()
Dim maxDate As Date
Dim fil As String
Dim qry As New SqlCommand()
Try
If Directory.Exists(Filepath.ToString) Then
For Each strFile In Directory.GetFiles(Filepath.ToString)
Path.GetFileName(strFile)
fil = Path.GetFileName(strFile).ToString
Dim fi As New FileInfo(strFile)
If maxDate = Nothing Then
maxDate = fi.CreationTime
fil = fi.FullName.ToString
Else
If maxDate < fi.CreationTime Then
maxDate = fi.CreationTime
End If
End If
Next
Else
sp.Send("Directory does not exist")
Return
End If
If fil <> Nothing Then
qry.CommandText = " SELECT '" & fil & "'"
'Execute the query and pass the result set back to SQL
sp.ExecuteAndSend(qry)
sp.Send(qry.CommandText.ToString)
End If
Catch ex As Exception
sp.Send(ex.Message.ToString)
End Try
End Sub
End Class
FUNCTION CODE DOES NOT WORK WITH ABOVE ERROR
Code Snippet
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports System.IO
Partial Public Class clr_fn_recentfile
<Microsoft.SqlServer.Server.SqlFunction()> _
Public Shared Function clr_fn_recentfile(ByVal Filepath As SqlString) As SqlString
Dim strFile As String
Dim sp As SqlPipe = SqlContext.Pipe()
Dim maxDate As Date
Dim fil As String
Dim qry As New SqlCommand()
Try
If Directory.Exists(Filepath.ToString) Then
For Each strFile In Directory.GetFiles(Filepath.ToString)
Path.GetFileName(strFile)
fil = Path.GetFileName(strFile).ToString
Dim fi As New FileInfo(strFile)
If maxDate = Nothing Then
maxDate = fi.CreationTime
fil = fi.FullName.ToString
Else
If maxDate < fi.CreationTime Then
maxDate = fi.CreationTime
End If
End If
Next
Else
sp.Send("Directory does not exist")
Exit Function
End If
If fil <> Nothing Then
Return fil
End If
Catch ex As Exception
sp.Send(ex.Message.ToString)
End Try
End Function
End Class
View 3 Replies
View Related
Apr 4, 2007
My users complain that they cant run a CLR function. I am told that it cant get access to the local file system. I do not how to code these so from SSIS is there any way to let the users gain access to this. If this is a permission issue what is the lease privilege that I can configure for this to work?
Thanks
AdminAnup
View 6 Replies
View Related
Dec 8, 2007
Hi,
I am using Sql Server 2005 as the database management and Access 2003 as the front-end. In the database, I intend to give different views of tables to different users. That's why I used suser_sname system function, which returns the windows login id and authenticates users to see different records in the same view. What I want to do in Access is, allowing some specific users to be able to do update, insert and delete operations through a form based on this view (which only depends on 1 table). However, Access tells me that "the recordset is not updateable". In order to be able to change records, I tried to create new index for the view in Sql Server, which failed giving "Sql Server, Error number:1949" and telling me that it fails since suser_sname yields non-deterministic results. The strange thing is that when I open VB Editor in Access and write a simple update code within this form, it updates both the view and the table in the database. My question is: How can I do update, delete and insert operations on the form directly? Is there a way to do the authentication without using a nondeterministic function in Sql Server or using the front-end Access 2003? Maybe a function similar to the current_user function in Access can do that, I don't know.
It's been a long question but I desperately need the answer. Any thanks will be appreciated.
View 1 Replies
View Related
Jan 16, 2007
Hi,
I am trying to write a table-valued function in SQL Server 2005 (SP1) to return all active directory groups a user belongs too, using managed code (VB.NET).
Testing the code with a simple winform I get the list of groups in about 0.4 seconds. However the table-valued function takes upwards of 17 seconds to run! Is this normal for managed code in SQL Server?
Imports SystemImports System.TextImports System.DataImports System.Data.SqlClientImports System.Data.SqlTypesImports System.CollectionsImports System.DirectoryServicesImports Microsoft.SqlServer.ServerPartial Public Class UserDefinedFunctions#Region "Constants" ''' <summary> ''' The connection string for Active Directory. ''' </summary> 'Private Const LDAP_CONNECTION_STRING As String = "LDAP://<My LDAP connection string> ''' <summary> ''' The LDAP search filter need to find a user in Active Directory. ''' </summary> 'Private Const LDAP_SEARCH_FILTER_USER As String = "(&(objectclass=user)(objectcategory=person)(sAMAccountName={0}))"#End Region ''' <summary> ''' Gets all active directory groups for the user. ''' </summary> ''' <returns>All dataset permissions for the user.</returns> <Microsoft.SqlServer.Server.SqlFunction(DataAccess:=DataAccessKind.None, FillRowMethodName:="udfUserActiveDirectoryGroupsFill", TableDefinition:="GroupID NVARCHAR(100)")> _ Public Shared Function udfUserActiveDirectoryGroups(ByVal userName As String) As IEnumerable ' Setup the active directory search. Dim searcher As New DirectorySearcher(LDAP_CONNECTION_STRING) searcher.Filter = String.Format(LDAP_SEARCH_FILTER_USER, userName) searcher.SearchScope = SearchScope.Subtree searcher.PropertiesToLoad.Add("distinguishedname") ' Run the active directory search. Dim result As SearchResult = searcher.FindOne() Dim userEntry As DirectoryEntry = result.GetDirectoryEntry() Dim userGroups As New ArrayList GetActiveDirectoryGroupsForEntry(userEntry, userGroups) Return userGroups End Function Public Shared Sub udfUserActiveDirectoryGroupsFill(ByVal source As Object, ByRef GroupID As SqlChars) GroupID = New SqlChars(CType(source, String)) End Sub ''' <summary> ''' Recursively gets the active directory groups for the directory entry. ''' </summary> ''' <param name="entry">The active directory entry.</param> ''' <param name="groups">The list of groups.</param> Private Shared Sub GetActiveDirectoryGroupsForEntry(ByVal entry As DirectoryEntry, ByVal groups As ArrayList) For i As Integer = 0 To entry.Properties("memberOf").Count - 1 Dim memberEntry As New DirectoryEntry("LDAP://" + entry.Properties("memberOf")(i).ToString()) groups.Add(memberEntry.Properties("sAMAccountName")(0).ToString()) GetActiveDirectoryGroupsForEntry(memberEntry, groups) Next End SubEnd Class
View 9 Replies
View Related
Apr 20, 2007
I created a CLR function based on following VB code:
Imports Microsoft.SqlServer.Server
Public Partial Class SqlClrVB
<Microsoft.SqlServer.Server.SqlFunction()> _
Public Shared Function GetTotalPhysicalMemory() As Integer
GetTotalPhysicalMemory = My.Computer.Info.TotalPhysicalMemory
End Function
End Class
The VB code was complied into a DLL called totalmem.dll and call following TSQL to map it into a SQL function:
create assembly totalmem from '!WORKINGDIR! otalmem.dll'
WITH PERMISSION_SET=UNSAFE
go
create function fnGetTotalMem()
returns int
as external name totalmem.SqlClrVB.GetTotalPhysicalMemory
go
When I call this function, it returned following error:
select dbo.fnGetTotalMem()
Msg 6522, Level 16, State 2, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'fnGetTotalMem':
System.IO.FileNotFoundException: Could not load file or assembly 'System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
System.IO.FileNotFoundException:
at Microsoft.VisualBasic.MyServices.Internal.ContextValue`1.get_Value()
at My.MyProject.ThreadSafeObjectProvider`1.get_GetInstance()
at SqlClrVB.GetTotalPhysicalMemory()
.
Anyone knows why I'm hitting this error? I didn't reference any System.Web interface why it needs to load System.Web assembly? The same code runs OK if I compile it as a separate VB application out side of SQL Server 2005.
Thanks much,
Zhiqiang
View 2 Replies
View Related
Sep 30, 2006
Hello,
Does anybody could help me to fixe this query, inside SQL Task to handle OnError event.
The function DT_TEXT does not work with this query and I need to convert the Error Message so that the french caracter ' can be accepted inside the Insert Query.
Here is my query :
"INSERT INTO LOG(EventType, PackageName, TaskName, EventCode, EventDescription, PackageDuration, ContainerDuration,InsertCount, Host) VALUES ('OnError', ' " + @[System::PackageName] + "', '"+ @[System::SourceName] + "', 0, '"+ (DT_TEXT)@[System::ErrorDescription] + "', 0, 0, 0, 'Toto'
)"
The error message is capted inside the Insert Query, for example,
the value of the variable ErrorDescription is : 'Erreur dans l'insertion ' with a quote inside, and therfore the Insert Query can not be executed.
Thank you for helping me to fixe this query !
View 2 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Aug 24, 2007
Hi,
I am facing a problem in executing the SSIS package.My System configuration is like this
PIII with 1.40 GHz and 2.5 GB of RAM.
Windows 2003 with SQL Server,SSIS installed.
50 GB of HardDive memory is free.
The Scenereo is like this :
We have 20000 records in our oracle database where we are having the CLOB data in it. We are fetching only the CLOB data that is storred in the XML_DATA (field name). Each CLOB has a XML in it, so we are getting each record and shredding that XML into defferent tables using the XSLT and XSD. To run the process fast , we made 5 channels so that data can be populated faster and each channel can populate 4000 records. The data flow in each channel is having the DefaultBufferRows property set to 20 and DefaultBufferSize is 10MB so that it does not take much of the buffer memory. So now when ever i try to run this package with 5 channels enabled i get this error
"Executing the query "select ESTIMATE_ID,xml_dat,id,co_cd from CLM_EST_XML_ESTIMATE WHERE XML_Estimate_ID=?" failed with the following error: "Insufficient memory to continue the execution of the program.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly."
I am not able to Release the Object Memory in each ForLoopContainer.
Can you please suggest me some solution.
View 4 Replies
View Related
Mar 10, 2008
Hi,
when I´m trying to save a SSIS Package in Visual Studio I´m having the following problem:
===================================
Exception of type 'System.OutOfMemoryException' was thrown. (Microsoft Visual Studio)
------------------------------
Program Location:
at System.String.GetStringForStringBuilder(String value, Int32 startIndex, Int32 length, Int32 capacity)
at System.Text.StringBuilder.GetNewString(String currentString, Int32 requiredLength)
at System.Text.StringBuilder.Append(Char value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BufferTextWriter.Write(Char ch)
at System.IO.TextWriter.Write(Char[] buffer, Int32 index, Int32 count)
at System.IO.TextWriter.Write(Char[] buffer)
at System.IO.TextWriter.Write(String value)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
The dtsx is around 8MB size, I have installed the service pack, what else could be?
thanks
View 3 Replies
View Related
Mar 3, 2007
Hi,
i am creating a SSIS package, for copying files from local meachine (where the pacakge) to other destination (\servernamefoldernamefilename) using script task. it's work fine while running package.
but if am schedule a job for the same its giving error (package execution failed)
Can anyone please help me this issue it's urgent
thanks in advace
sunil.
View 2 Replies
View Related
Jul 4, 2006
Hi,
I'm running SQL Server Agent services and SQL Server Integration services under same DomainUser account and the same DomainUser account is also having sysadmin rights in sql server.
And below is the SQLAgent.OUT file details which I'm getting while running the SSIS from SQL Agent job.
[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 4012
[101] SQL Server MachineNameXYZ version 9.00.1399 (0 connection limit)
[102] SQL Server ODBC driver version 9.00.1399
[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
[310] 4 processor(s) and 3072 MB RAM detected
[339] Local computer is MachineNameXYZ running Windows NT 5.2 (3790) Service Pack 1
[432] There are 11 subsystems in the subsystems cache
[125] Subsystem 'ActiveScripting' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'CmdExec' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Snapshot' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'LogReader' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Distribution' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Merge' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'QueueReader' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'ANALYSISQUERY' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'ANALYSISCOMMAND' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'SSIS' could not be loaded (reason: The specified module could not be found)
[364] The Messenger service has not been started - NetSend notifications will not be sent
[129] SQLSERVERAGENT starting under Windows NT service control
[260] Unable to start mail session (reason: No mail profile defined)
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
[LOG] Step 1 of job 'TestJob' (0x4A197E88EAD5134581A35132A546414C) cannot be run because the SSIS subsystem failed to load. The job has been suspended
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
[LOG] Step 1 of job 'TestJob' (0xE412C2AB10C7A34B87F5DFC8CFD978CA) cannot be run because the SSIS subsystem failed to load. The job has been suspended
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
Any help will be appreciated.
Regards,
M.S
View 13 Replies
View Related
