Success Of Stored Procedure
Jul 17, 2001Is there a parameter allowing to verify successful execution of a stored procedure?
Something that can be run as the last line in a stored procedure to verify its success...?
Thanks!
ADVERTISEMENT
Checking Success Of A Request In A Stored Procedure
Jul 23, 2005Hi,Say I have a stored procedure which does two INSERT operation.How can I check if the first INSERT succeeded in order to know if Ishould carry on and do the second one ?Regards
View 1 Replies View RelatedSSIS Pacakge Success/failure Based On Stored Procedure
Mar 11, 2008I have an SSIS package that executes a stored procedure. In that stored procedure is a try/catch block. If the try isn't successful, it goes to the catch block which does a rollback. So when I execute the SSIS package, it tells me that the stored procedure was ran successfully because there essentianlly were no errors and everything ran fine, but in reality, everytime it goes into the catch block and does a rollback, I want the SSIS package to fail as well. How would I send back a failure to the SSIS package from the stored procedure?
View 13 Replies View RelatedHow Do You Check For The Success Or Failure Of A Procedure Run In SQL
Mar 18, 2008I have a number of stored procedures that run one after the other. How do you code to get the success or failure so that some logic can be applied accordingly? I've heard of the TRY CATCH structure, but I new and have yet to use it. How many different ways can success or failure be handled in code?
View 4 Replies View RelatedCalling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)
Nov 1, 2007Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?
Mar 3, 2008Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure
Nov 14, 2014I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?
Jan 29, 2015I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.
Sep 19, 2006I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
Dec 28, 2005I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedSQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?
Sep 26, 2014I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
System Stored Procedure Call From Within My Database Stored Procedure
Mar 28, 2007I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net
Sep 13, 2007Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
Is The Transaction Context Available Within A 'called' Stored Procedure For A Transaction That Was Started In Parent Stored Procedure?
Mar 31, 2008I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Calling Stored Procedure Fromanother Stored Procedure
Oct 10, 2006Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedUse Resultset Returned From A Stored Procedure In Another Stored Procedure
Nov 15, 2006I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
SQL Stored Procedure Issue - Search Stored Procedure
May 18, 2007This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
Sql Count Using Stored Procedure Withing Stored Procedure
Apr 29, 2008I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Exec Twp Stored Procedure In A Main Stored Procedure
Apr 29, 2004Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah
Calling A Stored Procedure Or Function From Another Stored Procedure
Mar 2, 2007Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Execute Stored Procedure From Stored Procedure With Parameters
May 16, 2008Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
Success
Jul 15, 2004oK if anyone remembers the problems with my Update/termination Trigger I found it works best if I do it as a Stored procedure instead of a trigger. Thanks again for your help guys. I really appreciate it
View 3 Replies View RelatedStored Procedure In Database X, Executes Stored Procedure In Database Y, Wrapped In Transaction?
Jul 20, 2005Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies View RelatedDts 'success' With No Result...
Apr 9, 2002Hi:
I create a DTS package in 'Copy SQL Objects Task' to transfer 3 stored procedures from my local SQL msdb to remote testing msdb database.
Execution is 'successful' but the destination server msdb does not have the 3 stored procedures.
Any hint on this 'vanished' copy objects?
thanks
-D
Confirmation Of Success
Feb 13, 2004Just a thought.
If an issue is resolved please note that the problem has been resolved. Because there are "many ways to skin a cat" it would be helpful to anyone else with a similar problem (or someone trying to learn) what the solution was.
How Check A SQL Job Success Or Not?
Oct 11, 2006Hi expert,
I use a SQL Job that makes use of the BACKUP command. How can I check this job success or not?
Thanks
Success Message
Jun 19, 2007Hey all
Which system variable do I use if I would like to transfer success message into an SQL table? I'm running a task to import data into an SQL table. And I'm using the System::ErrorDescription variable (Execute SQL task) to insert error messages into a table but I would really appreciate it if someone could tell me what system variable would insert 'success' message into an SQL table. Tried a lot of searching on the net but couldn't find anything.
Many thanks,
Rupa
Success Stories
Oct 19, 2007Has anyone here been involved in a successful commercial Data Warehouse project?
If so, what was your role? How big was the project? Did you do it all or was their one guy data modelling, one for ETL, one for Client-side, one project managing, etc...? What tools did you use? Was it in SQL2000? 2005? Did you use DTS/SSIS for your ETL or Sprocs? Did you use SSAS? Were you writing lots of MDX to meet client-side needs? Or did you use a completely different toolset for all or some of this?
Did you use the Kimball approach? Or were you in the other camp?
Was your latency nightly or did you have some type of "real-time" capability?
I would prefer to hear from people who've actually been involved in successful projects (or failed projects if you would like to share with us why you think they failed). I'm not too interested in hearing from people that have never done it but have a theory as to how it should work (like me).
Many Thanks,
Coolerbob
(Or is there some other website forum I should be asking this question on? (like mdxteam, olapteam, datawarehouseteam or something)
Email Job Success To More Than One Operator
Feb 28, 2001Hi Guys, basically I have a scheduled job in MSSQL7, which on completion e-mails one of the operators.....
How can I get this job to email more than one operator upon completion???
Cheers....
Not Much Success With MULTI DELETE
May 11, 2006Trying to delete records associated with the same contact id from all the tables used for that contact. But I'm getting an error. Strange error because the table does exist and I've been able to do single deletes from that table. So, something tells me I'm not getting something right in my SQL statement. How do I delete records from all 3 tables using the same id (as opposed to doing 3 different SQL calls, one for each)?
-----------------
DELETE names, addresses, phones
FROM names AS n, addresses AS a, phones AS p
WHERE n.id = '12' AND a.id = '12' AND p.id = '12'
Error: Unknown table 'names' in MULTI DELETE
-----------------
(BTW, how do tag my code so it shows up in a code div?)
Success Arrows -- Moving Them?
May 10, 2007I apologize in advance for what is probably a really dumb question.
I have an SSIS package that is executing a number of data flow tasks simultaneously, and then all are followed by a single script step. I'm trying to get all the constraint arrows to look uniform by having them exit the DFTs on the right side and enter the script step on the left. Unfortunately, BI Dev Studio is putting the exiting arrows on the bottom, which looks awful and is difficult to follow. I can only move them between specific points on the bottom of the step. How do I move those arrows to the right side?
Thanks in advance.
SQL XML :: How To Query XML Field To Get Success Value
Dec 2, 2015How to use Xquery to get the success value and the result value from the following XML.
This XML is stored in a SQL Table XML field, i want to be able to get all the success and reslut values for all the records:
Here is my XML
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns1="https://data.abc.biz/mysoappathtest/?soap:customcalls:v1"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
[Code] ....
I am trying to get the result = 15810 and the Success value = true