I am trying to add two columns together and find all the entries that equal zero I have:
select table1.nbr, table2.itemvalue as CC
from table1, table2
where table1.nbr=table2.nbr and exists (select (OpnAc1+OpnAc2) as Open from table2
I want to take the sum of OpnAc1 and OpnAc2 and find all that equal 0, (meaning no open 1 or open 2)
HI all !
I am having a bit of a problem trying to limit a number of columns in a matrix appearing on a page.
At the moment, I have a dataset that lists the month and the mail packages that were sent during the month
The matrix works great HOWEVER, if there were more than 8 months in the matrix columns, it does not break and would make the page look like a huge landscape page.
I am trying to limit the number of columns appearing (this is the months column) on the matrix so that the pages stay in a potrait position. IE: every 8 columns appear on one page. Is there an option or an expression I could use in the Matrix ?
Thanks!
BErnard Ong
Hi,
I am experiencing a wired problem withe merge replication and SQL 2000 SP4.
We had replication working for 4 years without a problem, one of the table that we replicate has been growing in columns, now it has 55 columns.
I have noticed a problem, when I update the last column on the table and waits for the change to be updated on the subscriber the change is not there. But if I replicate the first 40 columns it works.
Changes made:
1) Upgraded to SP4
2) Added some extra fields using sp_addreplcolumn
Is this a known bug? Any ideas?
Regards
Hi,
I€™m trying to create a VERY wide table, with 1,000 columns of type varchar(MAX), nullable.
The CREATE TABLE statement (both in SQL 2005 & 2008), gives the following warning:
Warning: The table "WIDE_TABLE" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
When I insert data into the table, filling all columns with small, 10-byte string values, I get the following error:
Msg 50000, Level 16, State 1, Procedure sp_pivot, Line 118
Cannot create a row of size 15034 which is greater than the allowable maximum of 8060.
I€™d like to verify this observation: each row is created with 2000 bytes of offset data (2 byte * 1000 columns), 125 bytes for null bitmap (1000 columns / 8 bits) and some more €œwasted€? row information. This leaves less than 6K for the data itself. But since not all columns can fit within the page, forwarding pointers in the row need to be created, 24 byte per column, which very quickly add up to more than 8K, thus the error. So the 8K limit is met for much less columns than the max 1024 column restriction.
Furthermore, in SQL 2008, SPARSE columns will not solve the problem (maybe save some €œmetadata€? space in case the columns are null, but if not, I€™m with the same problem again, or even worse, since now each value takes more storage space. The max 30,000 columns in 2008 is only for cases where the column values are really sparse€¦
Is this the right observation? if so, is there a workaround besides splitting to multiple tables?
Thanks,
Aviv.
I have created the matrix report which has dynamic column, it grow columns(18) based on the 'MCU' field in PRD.MI table. I have added the 'MCU'(A,B,C,D,E,F,G,H,...Q) on 'Columns' in matrix table, to create matrix report and I have added 'mcst' on 'Data' in matrix table and I have added the 'msp2' on 'Rows' in matrix table. I have created new column after row and I added USP2DS.Final output is as given below.I need the split the matrix column per page.
I have added the 'MCU' on "Column group and 'msp2' on Row group.
Query:
select mi.*, SUBSTR(SM.USP2DS,6,9)AS DESC fromÂ
(SELECT a.mcu , a.msp2, SUM(a.mcst) AS Cost  Â
FROM PRD.MI as A Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
WHERE a.myr=2015 and a.mpr=7 Â Â Â Â Â Â Â Â Â Â
GROUP BY a.MCU, a.msp2 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
order by a.mcu, a.msp2 ) mi, Â Â Â Â Â Â Â Â Â Â Â
(SELECT Â DISTINCT U_SP2, USP2DS FROM UM.SM) SM
WHERE A.MSP2=SM.USP2 Â
ORDER BY MCU,msp2
I have tried the below post, but I am not able achieve my output. [URL] ....
Can someone please explain the difference between Output and External columns? I can't fathom why "Output" columns aren't good enough. In other words, what is there a need or value in having two types of "output" columns?
TIA,
Barkingdong
I am trying to find a way how to query following data from a table that looks like this:
ColA ColB ColC
1 2 3
Output should look like this:
ColA
1
2
3
I've got a question that I can't seem to find an answer for, I was hoping someone here might be able to point me in the right direction. I've set up a stored procedure that will email someone if any entries are added to a table . However, the output is garbled looking (see below)
Client Number SSN Client Name Old SD
New SD
------------- ----------- ---------------------------------------- --------
--------
800901 899-34-3482 John Smith 04/20/20
05/01/20
400909 144-23-0029 John Smith 04/09/20
04/11/20
447788 445-89-9967 kjl;j;j 04/05/20
04/12/20
300099 234-90-7815 John Johnson 04/08/20
04/15/20
What's happened is the client name field is too wide, so the New SD field kicks down to the next line. I'd like to clean this up. Is there a way I can either increase the length of the row before it moves to the next line, or can I re-size the client name field to match the size of the data. In other words, cli_name_vc is declared as a varchar(40). If the longest name that comes up in the query is 18 characters long, can I re-size the output so that it does not take up 40 characters?
Any help is greatly appreciated.
thanks,
-scott
I have a table like:
ID Disc
----------------
1 BUSH
2 JOHN
1 GOLE
2 MIKE
I would like output depending on ID to put Disc into two columns. Like:
ID Disc1 Disc2
----------------------------
1 BUSH NULL
2 NULL JOHN
1 GOLE NULL
2 NULL MIKE
Any help will be appreciated. Thanks
ZYT
Using MySQL 5, MySQLQuery (latest). Complete Newbie,
I have the following query:
SELECT i.IndivId, i.Surname, i.First_Names, i.Parents,
(SELECT i.Surname FROM individuals i, families f
where (i.IndivId = f.father_ID) and (i.indivId = f.Family_ID))
as "father"
FROM individuals i
where i.Parents>0
order by i.Parents;
It returns nulls for the subselect. There are 2 tables, individuals and Parents. I am trying to use a father id. in the PArents table to cause the individual id. (being the father of the individual(s)) to be named in the father column. I have a feeling I'm going wrong here.
I think the query above is pretty self explanatory!
Many thanks.
Hi Everyone,
I am trying to do a query where I need to use as little C# as possible to build my gridview. Basically I have a column called statusID. There are about 15 options for this column but I only want to count certain ones. I want to count when statusID = 3 and output that into a column called "fullUnitsUsed" but when the value is 4 or > 13 I want it to count and put the result into a column called "halfUnitsUsed". I also want it to count based on the month. To accomplish this I have used CASE and GROUP BY. This has worked to some extent. Currently if I COUNT for one month I get the correct number of fullUnitsUsed and halfUnitsUsed used for January. Unfortunately the query returns 2 records for the month. The first one has a value for fullUnitsUsed and halfUnitsUsed is NULL, the second record has fullUnitsUsed as NULL and halfUnitsUsed has the correct value. I was hoping to output one record where both fullUnitsUsed and halfUnitsUsed have data. My other problem is that if I test for the entire year (which is what this query is supposed to do) there are 5 records returned for each month, 3 of the records have fullUnitsUsed and halfUnitsUsed both as NULL and for the other 2, one has fullUnitsUsed with data and the other has halfUnitsUsed with data and the other column in both records is NULL. The values for fullUnitsUsed and halfUnitsUsed are counted for the entire year as well, which I only want it to count based on each month. Below is my query, any suggestions about how to approach this will be greatly appreciated. If any clarification is needed please let me know. Again if I could get this to work completely with SQL and not need to use any more C# than I have to it would be preferable.
SELECT People.lastName + ', ' + People.firstName AS fullName, Property.Name, NYSDDSORegion.Description, OpenDays.[month], OpenDays.maxOpenDays,CASE Attend.statusID
WHEN 3 THEN COUNT(Attend.statusID)
END AS fullUnitsUsed,CASE Attend.statusID
WHEN 4 THEN COUNT(Attend.statusID)
WHEN 14 THEN COUNT(Attend.statusID)
WHEN 15 THEN COUNT(Attend.statusID)
WHEN 16 THEN COUNT(Attend.statusID)
WHEN 17 THEN COUNT(Attend.statusID)
WHEN 18 THEN COUNT(Attend.statusID)
WHEN 19 THEN COUNT(Attend.statusID)
WHEN 20 THEN COUNT(Attend.statusID)
END AS halfUnitsUsed
FROM Attend INNER JOIN People ON Attend.personID = People.personID
INNER JOIN Property ON Attend.propertyID = Property.propertyID
INNER JOIN NYSDDSORegion ON Property.RegionID = NYSDDSORegion.RegionID
CROSS JOIN OpenDays
WHERE (Attend.attendDate BETWEEN '1/1/2007' AND '12/31/2007')
GROUP BY Property.Name, People.lastName, NYSDDSORegion.Description, People.firstName, OpenDays.monthID, OpenDays.[month], OpenDays.maxOpenDays, Attend.statusID
ORDER BY Property.Name, fullName, NYSDDSORegion.Description
I'll show my schema first, then I'll explain what I'm doing:
--------------------------------------------------
Events
--------------------------------------------------
ID | E_Title
--------------------------------------------------
--------------------------------------------------
EventOptionGroups
--------------------------------------------------
ID | EOG_EventID | EOG_OptionGroupID
--------------------------------------------------
--------------------------------------------------
OptionGroups
--------------------------------------------------
ID | OG_Title
--------------------------------------------------
--------------------------------------------------
Options
--------------------------------------------------
ID | O_OptionGroupID | O_Description
--------------------------------------------------
--------------------------------------------------
EventRegistration
--------------------------------------------------
ID | ER_EventID | ER_Name
--------------------------------------------------
--------------------------------------------------
RegistrantOptions
--------------------------------------------------
ID | RO_EventRegistrationID | RO_OptionGroupID | RO_Selection
--------------------------------------------------
There are several events. Each event has several different sessions (stored in EventOptionGroups), and each session has a certain number of options (stored in Options).
A user can sign up for an event, and their information is stored in EventRegistration. They can choose an option for each session in the event. For each option they choose, a new row is added to RegistrantOptions.
For each row in EventRegistration, I want to output the user's information, and then the option they chose for each session in the event. Like this:
----------------------------------------------------------------------
E_Title | ER_Name | OG_Title1 | OG_Title2 | OG_Title3
----------------------------------------------------------------------
Event | Bob | O_Description1 | O_Description2 | O_Description3
So in that example, that event had 3 sessions.
Right now, I can only output E_Title and ER_Name, I don't know how to output the session information
I am having a bit of trouble writing a query that dynamically outputs what I need.
I have a table that looks like this:
COL1 AAA BBB CCC
CAT 1 3 3
CAT 1 2 2
CAT 1 4 4
DOG 2 3 3
DOG 5 5 5
MICE 1 1 1
I need it to dynamically output based off COL1, the output should look like this. When there are more rows for CAT, it should output more columns. Kind of like merging the columns
COL1 AAA BBB CCC AAA BBB CCC AAA BBB CCC
CAT 1 3 3 1 2 2 1 4 4
DOG 2 3 3 5 5 5 NULL NULL NULL
MICE 1 1 1 NULL NULL NULL NULL NULL NULL
Hi All,Currently the query returns 2006-03-27 00:00:00, can I make it output03/27/2006, I want to truncate the time, and replace the hyphens withforward slashes. Any ideas?Thanks In Advance,~CK
View 6 Replies View RelatedWhen setting an output's "IsErrorOut" property to true, is it also possible to add additional columns to that error output?
I'd like to add a message beyond the standard errorCode and errorColumn columns, a column which is the "specific error message", not just a lookup on the errorCode.
IDTSOutput90 outError = ComponentMetaData.OutputCollection.New();
outError.Name = "Error Output";
outError.IsErrorOut = true;
// Add extra column here, e.g. ErrorMessage
Hi All,
I have an OLE DB transform with a SQL Command of:
sp_get_sponsor_parent ?,? OUTPUT
where sp_get_sponsor_parent is defined like:
CREATE PROCEDURE [dbo].[sp_get_sponsor_parent]
@pEID int,
@results int OUTPUT
AS
BEGIN
.
.
.
END
I map the columns, refresh & OK out of the component without trouble, but on executing the package it fails during validation on this component. I'm utterly stumped.
Any light shed would be greatly appreciated.
Many thanks in advance,
Tamim.
I created an Excel Source and used a query to get the data,i.e
SELECT F1,F2,F3,F4,F5,F6,F7 FROM [Fut Days$A20:G1480]
The query works fine, the preview returns the rows, but SSIS will not generate output Columns nor will it let me manually add them? Am I missing something?
I apologise if this question has been asked before but I have spent ages searching these forums and the internet for an answer and I am yet to find one.
My problem is that I have a package which imports a column, lets call it 'Column A'. Column A is used to create other columns, lets say Columns B, C & D. This is done in a script using asychronous input and once completed column A is no longer used. Other tranformations occur to B, C & D including a split and then finally a merge together again, but all the time A seems to remain a valid input on all processes yet I never choose to use or output it. When I come to the merge process I am required to merge columns B, C & D but also A, surely this is inefficient. Furthermore when the package has run I get a warning telling me that Column A is not required and should be removed, but I can not seem to find anywhere to remove it from the pipe.
I am hoping that I am just missing something obvious here but I have been tearing my hair out so any help would be much appreciated!
Graham.
hello all,
i am trying to create a view but i keep getting the error 'View definition includes no output columns or no items in the FROM clause.'
below is the select statement that's the basis of my view. the explanation i got from the F1 help of enterprise manager was ...
View definition includes no output columns or no items in the FROM clause.
A view definition must have at least one table or table-structured object in the FROM clause, and must have at least one column in the select list. The view definition is missing one or both. Modify the view definition accordingly.
query:
select
Case_CaseId,
Logged,
CAST(DATEDIFF(minute, Logged, Waiting)/60.0 AS NUMERIC(9, 2)) AS Waiting,
CAST(DATEDIFF(minute, Logged, Investigating) /60.0 AS NUMERIC(9, 2)) AS Investigating,
CAST(DATEDIFF(minute, Logged, Rejected) /60.0 AS NUMERIC(9, 2)) AS Rejected,
CAST(DATEDIFF(minute, Logged, Resolved) /60.0 AS NUMERIC(9, 2)) AS Resolved,
CAST(DATEDIFF(minute, Logged, Solved) /60.0 AS NUMERIC(9, 2)) AS Solved,
CAST(DATEDIFF(minute, Logged, Closed) /60.0 AS NUMERIC(9, 2)) AS Closed
from
(
SELECT
Case_CaseId,
MIN(CASE WHEN case_stage = 'Logged' THEN Case_CreatedDate END) AS Logged,
MIN(CASE WHEN case_stage = 'Waiting' THEN Case_CreatedDate END) AS Waiting,
MIN(CASE WHEN case_stage = 'Investigating' THEN Case_CreatedDate END) AS Investigating,
AS Rejected, MIN(CASE WHEN case_stage = 'Resolved' THEN Case_CreatedDate END) AS Resolved,
MIN(CASE WHEN case_stage = 'Solved' THEN Case_CreatedDate END) AS Solved,
MIN(CASE WHEN case_stage = 'Closed' THEN Case_CreatedDate END) AS Closed
FROM
CaseProgress
GROUP BY Case_CaseId
) as temp
order by Case_CaseId
Can I add Output Columns to the Script Transformation Editor using code? I have to execute a SQL Statement to determine the number of years we have the data for for an item and then create the columns for the months in those years and populate them with the quantities. So my question is can I create output columns to the Script Transformation Editor on the fly that is as it is being executed?
Any input will be good.
Thanks,
MShah
I've read about the XML Source sometimes setting error output columns to DT_WSTR(255), but mine is now setting them to DT_NTEXT.
Anyone have any suggestions short of an XML editor? I'm concerned that I might do something to "refresh" the columns and cause the problem again.
I am using a script component to transform data. In the script component I created a bunch of fields for the output. Is there any way to loop through that list of columns? Is there code I can use in the script component to access the names, data types, data etc?
I saw a lot of informaiton on the OutputColumnCollection as part of some IDTSOuput90 thing (greek to me). As best I can guess this is for creating your own new columns, but can I see what columns are already defined via the script interface?
Hi guys
I want to format the result of a SQL Statement carried out in the query analyzer. Example:
suppose that you have this table:
col1 col2
------------------------- -----------------------
abcdefg bdbsjjdasjdh
bdfjsjdf hasdasjdasj
jhsdjhd asjdhashdas
hasjdhj ahsjdhajshdj
and I want this output:
col1 col2
---------- ----------------
abcdefg bdbsjjdasjdh
bdfjsjdf hasdasjdasj
jhsdjhd asjdhashdas
hasjdhj ahsjdhajshdj
I would like my transformation to automatically create an output column for each input column. Any tips? I can't seem to determine which event to listen to or method to override.
View 3 Replies View Related
Hi there,
I'm getting an error in ascript transform shape.
When I try to write a value to an output column I'm getting an error saying the object reference cannot be set.
So my code looks like this - Row.OutputColumn = True
Any ideas??
I am not sure which type to use for my Script Transformation Editor output fields. I'm getting errors based on the Data Type I'm specifying for my fields.
Print Screens:
http://www.webfound.net/script_task.jpg
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Import Maintenance (mnt) File [Split HeaderRows into Columns [5176]]: Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'UInteger'.
Line 21 Column 37 through 71
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 22 Column 35 through 69
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 23 Column 37 through 71
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 25 Column 27 through 61
Error at Import Maintenance (mnt) File [Split HeaderRows into Columns [5176]]: Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'UInteger'.
Line 21 Column 37 through 71
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 22 Column 35 through 69
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 23 Column 37 through 71
Error 30512: Option Strict On disallows implicit conversions from 'Double' to 'Long'.
Line 25 Column 27 through 61
Error at Import Maintenance (mnt) File [DTS.Pipeline]: "component "Split HeaderRows into Columns" (5176)" failed validation and returned validation status "VS_ISBROKEN".
Error at Import Maintenance (mnt) File [DTS.Pipeline]: One or more component failed validation.
Error at Import Maintenance (mnt) File: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
I'm not sure if this is needed but here's the script I coded in my script task also:
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim strWholeRow As String = Row.OutputHeaderRows
Row.BatchDate = CStr(strWholeRow.Substring(0, 8))
Row.NotUsed = CStr(strWholeRow.Substring(9, 32))
Row.TransactionCode = CStr(strWholeRow.Substring(33, 34))
Row.GrossBatchTotalAmount = CDbl(strWholeRow.Substring(35, 44))
Row.NetBatchTotalAmount = CDbl(strWholeRow.Substring(45, 54))
Row.BatchTransactionCount = CDbl(strWholeRow.Substring(55, 59))
Row.PNETID = CStr(strWholeRow.Substring(60, 63))
Row.PartnerCode = CDbl(strWholeRow.Substring(64, 67))
Row.Filler = strWholeRow.Substring(68, 100)
End Sub
End Class
Greetings everyone,
I am seeing a particular problem in the XML Source Editor "Columns" configuration where it is not persisting the "Output name" selection.
Control Flow Tab:
1. I use a "Exec SQL Command" to drop, create, or alter the destination tables in the database that I want to be repository for the inbound XML data. The data types are fairly straightforward.
2. I add a singular "Data Flow"
Data Flow Tab:
1. I add a "XML Source" task, and assign a well-defined XML file. I then use the "Generate XSD" option in the "Connection manager"; and I am fairly satisfied with the generated XSD.
2. I create "OLE DB Destination"
3. I wire the "XML Source" to the "OLE DB Destination". In the "XML Source" in the "Columns".
4. I go to the dropdown list of "Output name" and see the list ordered with the various complex-types that I want to map and transfer to a target table.
For the sake of this report, I select the 5th one down on the list (for which I already have a target table) - let's call this "Mesh"
5. In the "Input Output" dialog, I select the "output" to be the desired 5th item, "Mesh"
6. I check all my mappings so that they map one-to-one ... XML name entries match SQL table destination mapping entries; correct types; correct size
7. Check the metadata and it all looks good.
8. When I hit "Debug" to test the package the failure occurs at the "XML Source". The error report comes back saying that it failed because "field xxx in Contributor was truncated". However, "Contributor" corresponds to the 1st name in the dropdown list presented in "Columns" "Output name:".
If I select return to Step 4, when I open up "Columns" I see that my previous selection of the 5th item on the list named "Mesh" was not persisted, but invariably and no matter how often I select item #5 "Mesh" and save to ensure that selection sticks, it is not persisted.
I hand-edited the .dtsx file and only then was I able to make this stick. However, if I ever re-save the package this non-persistency pops up again.
Am I doing something wrong here or is this a known defect? As I have several dozen XSD mappings that I want to transfer to tables, hand-editing is not something I relish.
I look forward to your reply.
RudyC
I am trying to update a table and then also use OUTPUT clause to capture some of the columns. The code that I am using is something like the one below
UPDATE s
SET Exception_Ind = 1
OUTPUT s.Master_Id, s.TCK_NR
INTO #temp2
FROM Master_Summary s
INNER JOIN Exception d
ON d.Id = LEFT(s.Id, 8)
AND d.Barcode_Num = s.TCK_NR
WHERE s.Exception_Ind IS NULL
The above code is throwing an error as follows:
Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113
The multi-part identifier "s.Master_Id" could not be bound.
Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113
The multi-part identifier "s.TCK_NR" could not be bound.
I'm having a tad bit of trouble getting output from an asynchronous component that I've written and am looking for some insight.
This component takes in a name string passed from upstream and parses the name components into standardized output fields. I'm using an asynchronous component because if the name string contains two names ("Fred & Wilma Flintstone") I'm outputting one row for Fred and one for Wilma. I've gotten it to run and with debugging have observed what appeared to me to be proper execution, but zero rows are flowing out of it.
In my ProvideComponentProperties method, I add the three fields and there associated metadata to the OutputColumnCollection. Is this method where this should occur? It's before the PrimeOutput method, so I didn't know if I should be creating the output columns in ProcessInput (i.e., after the output buffer is provided by PrimeOutput.)
In ProcessInput, I'm using AddRow for each input row and another if it contains a second name, setting the value for each index using the buffer's SetString method, to no avail. I can observe it to this point, but then don't know what's in that output buffer (if I'm using the wrong buffer index value, etc)
Thanks.
I'm trying to create a fairly simple custom transform component (because I've read that's the easiest one to create) which will take one column from a flat file source and based on the first row create the output columns.
I'm actually trying to write a component that will solve the now well known problem with parsing CSV files in SSIS. I have a lot of source files and all have many columns so a component that can read in the first line from the CSV file and create the output columns automatically will save me lots of time when migrating the old DTS packages.
I have the basic component set up but I'm stuck when trying to override the OnInputPathAttached method because I don't know how to use the inputID to get the first line from the input (the buffer).
Are there any good examples for creating output columns dynamically based on the input buffer?
Should I just give up on on the transform and create a custom source component instead?
I explicitly set one column to have text qualifiers in a flat file connection mgr and specified to use double quotes as the qualifier, yet in the output file, the column is not qualified. What did I leave out ?
View 2 Replies View RelatedIF Object_id('GoldenSecurity') IS NOT NULL DROP TABLE dbo.GoldenSecurity;
IF Object_id('GoldenSecurityRowVersion') IS NOT NULL DROP TABLE dbo.GoldenSecurityRowVersion;
CREATE TABLE dbo.GoldenSecurity (securityID INT, CompanyId INT, Securityname VARCHAR(50), issuedate SMALLDATETIME, currencyID INT)
[Code] ......
I have a data source that I access via odbc in a DataReader Source component in SSIS. I can access the data fine. However, I am having problems with certain fields that are numeric (specifically home prices ranging from 100,000.00 to 99,999,999.00). In the advanced editor for my data reader source under the input and output properties tab, in data reader output under the external columns and output columns, these fields for some reason default to numeric data types with a precision of 4 and a scale of zero, not large enough to hold the data that is coming in. This causes errors that make the data come in as null (after i specify to ignore the errors).
I can change the precision and scale to 18 and 4 in the external columns, but when I try to change the datatype, precision or scale in the output columns I get the following message:
Property Value is not valid.
The details are:
Error at Import DataReader Source: The data type of output columns on the component "DataReader Source" cannot be changed.
Error at DataReader Source: System.Runtime.InteropServices.COMException (0xC020837D)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.SetOutputColumnDataTypeProperties(Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostSetOutputColumnDataTypeProperties(IDTSManagedComponentWrapper90 wrapper, Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
Any help is greatly appreciated.
Dave