select '$ '+ CONVERT(varchar,CONVERT(decimal(10,0),CONVERT(money, Amt_Value)),1) as [Amount]
from Products
How can I sum this column values and need to set a validation like the column has null values it has to return zero.
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
How can I check on NULL values in a Select statement?
SELECT ID FROM TabelWHERE somecolumn <> NULL??
I am using Visual Web Developer Express 2005 and SQL Server Express 2005.
I have set up a trigger that fires when an update has been performed on a specific table. The trigger checks to see if specific columns have been updated. If they have, then the trigger code is executed. This part works fine.
I am now trying to find a way to check if null values exist in either one of two field from the same table. If either field contains a null value, then I don't want the trigger code to be executed.
How can I check for null values and skip a block of code within my Transact Sql trigger.
Thanks.....
I am using the below query to calculate column values. But I need to return zero when a column values is empty or null.
select [Funding] [Fundings],
[Original] AS [Originals],
[Variance] = SUM([Previous_Year]-[Current_Year]),
[SumValue] = SUM([CurrentYear]/4),
[ActualValue] = SUM([Variance] * 0.75),
[FinanceYear],
[New Value] = SUM([Previous_Year]+[Current_Year])
from Finance
GROUP BY [Original], [FinanceYear]
Hi,
I have a table as follows
Table Master
{
Id varchar(20),
Cat1 datetime,
Cat2 datetime,
Cat3 datetime,
Cat4 datetime
}
and the data in the table is as follows
Table Master
{
Id cat1 cat2 cat3 cat4
-----------------------------------------------
1 d11 null d13 d14
2 d21 d22 d23 d24
3 NULL d32 d33 d34
4 d41 d42 NULL NULL
}
I want to retrive column names and its values wheb the ID matches to some value.
Can any one please let me know how to do this?
Thanks alot
~Mohan
Hi,
I have at table as foolows
Table Cat3
{
ID,
Update datetime
}
and also have a master table as follows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime
}
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime,
Cat3 Datetime
}
I would like to insert the data to this column. The sample output is as follows
Before insertng the data of table ;Cat3' into the Master table
Table Master
{
Id Cat1 Cat2
---------------------------------
1 D1 D2
2 D2 NULL
3 D3 D4
}
And The Cat3 table data is as follows
Table Cat3
{
ID Update
--------------------------
1 D5
3 D6
4 D7
}
The final putput of the master table should be as follows
Table Master
{
Id Cat1 Cat2 Cat3
------------------------------------------------------
1 D1 D2 D5
2 D2 NULL NULL
3 D3 D4 D6
4 NULL NULL D7
}
Can any one please let me know the query to achieve this
Thank you very much for your time and support
~Moahn
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
[CustomerId] [nvarchar](50) NULL,
[CustomeName] [nvarchar](50) NULL,
[CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
say i have a table, and in it are two columns, column1 and column2 and i do the following query:
SELECT column1, column2 FROM table WHERE column2 = '12345'
i want to check if column1 has all the same values, so in the first case, no
column1 column2
------- --------
4 12345
9 12345
5 12345
column1 column2
------- --------
9 12345
9 12345
9 12345
in the 2nd case, column1 contains all the same values, so yes
is there anyway i can check this? i would be doing this in a trigger.. say when a new row is inserted, the value of column1 is inserted, but col 2 is null.. so when they try to fill in the value for col2 of that row, the trigger checks to see if the value they put for col 2 is already in the table.. if it isn't, then everything is ok. but if it is already in teh table, then it checks col1 to see if all the values of col1 are the same
i hope this makes sense
thanks
how to do a check for 2 columns. As long as there is data for at least one of the columns I want to return rows.
Example Data
create table test
(
ID int,
set1 varchar(50),
set2 varchar(50),
[code]....
I have the following objective:
1. I want to check a column to see if there are values (to Eliminate dups)
2. Once checked the values in a column, if not found insert the new value
Here is my code for this:
ALTER TRIGGER DUPLICATES ON AMGR_User_Fields_Tbl
-- When inserting or updating
AFTER INSERT, UPDATE AS
-- Declare the variables
DECLARE @AN varchar(200)
[Code] ....
If i have a table with Col1,Col2,Col4, and Col5, how can I create and add a Col3 with null values? The format would be varchar.
View 13 Replies View RelatedI have the following tables:
tbl_Person (personID, first_name, lastname)
tbl_student (studentID)
tbl_stupar (personID, StudentID, relationship)
tbl_person_Phone (personID, phone)
I need to list all students who have both parents phone number is null. The parent relationship values 1 and 2 indicates the person is either Mom (value 2) or dad (value 1) of the student. Note: I am using student parent as an example to write my query.
Hi,
I have a table employee with 4 columns,
empno fname lname deptno
1 abc def 10
2 fff hhh 20
3 abc def NULL
4 abc def NULL
5 abc def 50
suppose i want to know the total number of null values in a particular column say deptno how shuld i write a query?
select count(deptno) from employee
where deptno IS NULL..
When i query this i get the result as 0..
Hello
I use a Flat File Connection Manager for a file with 18 columns.
My column delimiter is the "~" caracter and my row delimiter is "{CR}{LF}"
The source files contains about 2300 lines. None of them contain NULL values.
My last row is a numeric(16,2). Even if it is not the appropriate type for the value I want extract, it works with all my columns.
My problem is with the last column. I have read the SQL Server 2005 interpretation of the row delimiter as actually the last row column delimiter.
But, here, my values are OK and put in the destination table if it is not 0 : "+0000000001352" for example in the file.
If it is 0 : "+00000000000000", and if I considered errors as INGORE FAILURE and put data in the destination table, accepting NULL values, I have NULL values in table for these 0 values. And correct values for non-0 values.
How do you explain that ? How I can fix the problem and correctly read my file ?
For your information, if I REDIRECT ROW in the Flat File Error Output, the ErrorCode is : -1071607676 and ErrorDescription is "The data value cannot be converted for reasons other than sign mismatch or data overflow."
Hello
I use a Flat File Connection Manager for a file with 18 columns.
My column delimiter is the "~" caracter and my row delimiter is "{CR}{LF}"
The source files contains about 2300 lines. None of them contain NULL values.
My last row is a numeric(16,2). Even if it is not the appropriate type for the value I want extract, it works with all my columns.
My problem is with the last column. I have read the SQL Server 2005 interpretation of the row delimiter as actually the last row column delimiter.
But, here, my values are OK and put in the destination table if it is not 0 : "+0000000001352" for example in the file.
If it is 0 : "+00000000000000", and if I considered errors as INGORE FAILURE and put data in the destination table, accepting NULL values, I have NULL values in table for these 0 values. And correct values for non-0 values.
How do you explain that ? How I can fix the problem and correctly read my file ?
For your information, if I REDIRECT ROW in the Flat File Error Output, the ErrorCode is : -1071607676 and ErrorDescription is "The data value cannot be converted for reasons other than sign mismatch or data overflow."
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
How do I add column names as Total and SubTotal for NULL values.
SELECT DISTINCT
--[Group]
[Month]
,[Market]
,[Environment]
,[type]
, COUNT(*)
[code]....
Using c# in the compact framework, is there a way to do a parameterized query for counting the number of records where a specified column is null. I tried all of these, but none of them work:
cmd.Add(new SqlCeParameter("@IntColumn", SqlInt32.Null));
cmd.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", DBNull.Value));
cmd.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", SqlInt32.Null));
cmd.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", DBNull.Value));
cmd.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmdGetNumRead.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmdGetNumRead.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmdGetNumRead.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmdGetNumRead.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmd.CommandText = "select count(*) from Meter where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmd.CommandText = "select count(*) from Meter where not IntColumn = @IntColumn";
md.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmd.CommandText = "select count(*) from Meter where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmd.CommandText = "select count(*) from Meter where not IntColumn = @IntColumn";
Whenever I use a "is not" in the query I get an exception, otherwise it returns a count of 0 which is not accurate. Any help will be appreciated.
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
hi
as i am a beginner to ssis. i have tried a lot to solce a logicbut it did not work.the situation is as i have a view which is updated dynamically whenever thebase table gets updated. then from view i hvae to select the new inserted row with the order id as identity column. there is a column in a table as salespersonid i have to check if the value is null or not.if its null then i have to assign a sales personid from the table havind the sales person detail. if its already in the row then i have to create a xml file of that data and send file so,e location. i have created a stored procedure to work on the creation of a xml file. but i hve tried a lot about how to check the value of the salepersonid which may be null or anu number and deceide to do one of the above operation. i have to do it in ssis.
i am stuck on it.
can any one have any idea.on proceeding it.
thanks in advance.
Hi,
I have a data-flow-task that imports data to sqlserver.
Now I want to check, if a special column of an imported record is null.
If yes, I have to wait 10 minutes and jump to the data-flow-task again. (Cjeck and wait).
How can I do this with the integration services?
Thanks
Gerd
I have the following code to send out an email if the row count of a table exceeds a certain number. But it seems to fire an email alert no matter what. condition check part of the code?
use msdb
go
create table ##resultset (
total int)
[code]...
Hi,
It seems like For Loop Container works like do-while loop in C++. I have set its EvalExpresstion to @[User::SyncStats]==0 , I have an Execute SQL Task before this container that sets the variable to 1 but Container still executes atleast one time.
Anybody else been through this ?
I have a this code
SELECT @maxid = MAX(id) FROM Quote
now i need to check if @maxid is null.. if so i want to set it as 1. how do i do this
Is it possible to use a IIF IsNothing expression and check another condition? For all the values that are blank, I want it to check another column if "Disposition" = 2 then I want to show "Inactive"
=iif(isnothing(Fields!Value)," ","MS " & Fields!Value)
How can i write a condition for like isdate(Fields!DueDate.value)
I tried isdate but i am getting an error message. what is the equivalent for isdate in sql server reporting services formula fields or calculated fields expression.
Thank you very much for the information.
*********************************************
=IIF(isdate(Fields!DueDate.Value), ................
********************************************
I want to join 2 tables, table a and table b where b is a lookup table by left outer join. my question is how can i generate a flag that show whether match or not match the join condition ?
**The lookup table b for column id and country are always not null values, and both of them are the keys to join table a. This is because same id and country can have multiples rows in table a due to update date and posting date fields.
example table a
id country area
1 China Asia
2 Thailand Asia
3 Jamaica SouthAmerica
4 Japan Asia
example table b
id country area
1 China Asia
2 Thailand SouthEastAsia
3 Jamaica SouthAmerica
5 USA America
Expected output
id country area Match
1 China Asia Y
2 Thailand SouthEastAsia Y
3 Jamaica SouthAmerica Y
4 Japan Asia N
I have created a package that use SSIS check pointing for failure-retry mechanism. I knew that when this package fails, on restarting the package it starts from the task where it got failed.
Is it possible for me to override this on a custom condition and start the package at an earlier task where it executed successfully?
Ex:
Check pointing is enabled.
FTP task è Write to Staging Table è Write to Target table.
Assuming I am downloading XML file through FTP and writing to a table.
FTP Download is successful.
Read from XML file and write to Staging table task failed because of downloaded file is not a well formed XML.
Here, FTP task is completed successfully; it failed only in the second task. When I re-run the package; it starts from the second [Read from XML file and write to staging table] task because of check pointing.
Is it possible for me to restart from the FTP task on a custom condition where it executed successfully?
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
I want to write an Query for a report that has 7 parameters. I want to allow Null for these parameters but at the same time in the Query i want to put an AND condition for all the parameters. I cannot put an OR condition.
For Example;
If i have a report with 2 parameters then the script will have 2* 2 If conditions
something like:-
if( @parameter1 is not Null and @parameter is not Null)
select A, B, C
From Table 1
Where parameter1 = @parameter1 and parameter2 = @prameter2
if( @parameter1 is not Null AND @parameter2 is Null)
select A, B, C
From Table 1
Where parameter1 = @parameter1
If( @parameter1 is Null AND @parameter2 is Not Null)
select A, B, C
From Table 1
Where parameter2 = @parameter2
If( @parameter1 is Null AND @parameter2 is Null)
select A, B, C
From Table 1
For 7 parameter there will be way too many If conditions. Is there an better approch to write a Query for such a situation?