Sum Columns Based On A Single Column Value
Sep 10, 2014
I’m trying to figure out a way to sum columns for similar IDs, based on the contents of a single field. For example, if I’m calculating attendance percentages for students, and codes P and T count as Present, and codes A and E count as Absent, I would want to total Present and Absent codes separately, in their own columns. I would then like to use those totals to calculate percentage, but I can do that. It’s the SUM based on column value (by ID) that is giving issue.
If I have the following view:
IDLNFNCDTotal
123456MearsBenP12
123456MearsBenA2
123456MearsBenT6
234567NortonSusanP15
234567NortonSusanA2
234567NortonSusanT2
234567NortonSusanE1
I would like something like this:
IDLNFNPresentAbsentPercentage
123456MearsBen18290.0
234567NortonSusan17385.0
I’ve been playing around with nested queries, but nothing’s working. This is a glimpse of the mess that I’ve created trying to sort this out. Many errors.
I just noticed that I used a simpler example than the SQL I included, so I modified it a bit. There are additional fields that I'll need to include, but I want to get the logic working correctly. From there, I can handle the rest. So here's a more appropriate code example showing the direction I'm trying to go with this.
SELECT ID, [Last Name], [First Name], CD, Present, Absent, CAST(LEFT(Present / (Absent + Present) * 100, 5) AS varchar) + '%' AS Percentage
FROM (SELECT ID, CD, TotalAHD, CAST
((SELECT SUM(TotalAHD) AS Expr1
FROM SumAHDforAttndPercentages AS p
[Code] ...
View 2 Replies
ADVERTISEMENT
Sep 3, 2014
I have data:
Ticket User Priority
A ME 1
B ME 1
C ME 2
C ME 3
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
H YOU 3
I ME 1
Essentially if Ticket and User are the same I just want the min priority returned.
SO:
Ticket User Priority
A ME 1
B ME 1
C ME 2
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
I ME 1
I've tried partition and rank but can't get it to return the right output.
View 5 Replies
View Related
Oct 13, 2015
The data I have is as follows -
ID1 ID2 Date Action
100 500 09/08/14 Open
100 500 09/24/14 Close
101 510 07/10/15 Open
101 510 07/19/15 Close
The output I want in a single result set is -
ID1 ID2 Open_Date Close_Date
100 500 09/08/14 09/24/14
101 510 07/10/15 07/19/15
Any way to do this in T-SQL .
View 10 Replies
View Related
Oct 14, 2015
LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays
1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10
I have the above table (LeaveEntitlement) which has the above columns.
What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.
For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual
The result should be shown in new column name AnnualLeave (20)
sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick
The result should be shown in new column name SickLeave (10)
Same all leave Types
The table should be shown as the below after executing the query
LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave
1 1 1 20 0
2 1 2 0 10
3 2 2 0 20
is it possible in sql server
View 8 Replies
View Related
Jan 13, 2005
Hi
This is probably a very basic question for most people in this group.
How do i split the data in a column in to 2 columns? This can be done in access with an update query but in MS SQL server I am not sure.
Here is an example of what i want to acheive
FName
John?Doe
FName LName
John Doe
thanks for the help
prit
View 7 Replies
View Related
Mar 4, 2008
I have a table which has single column like this.
REP5426 02-28-08 0592 00100028 CAFE 00205415 23.77 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00580910 475.58 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00800840 -13.32 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00205416 23.77 A O INPUT
I want to put this in a new table in individual columns
Col1 col2 col3 col4 col5 col6 col7 col8 col9
REP5426 02-28-08 0592 00100028 CAFE 00205415 23.77 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00580910 475.58 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00800840 -13.32 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00205416 23.77 A O INPUT
How to do this.
Thanks.
View 2 Replies
View Related
Jun 4, 2015
I have a requirements to make a single column using a date from multiple columns. below my DDL and sample.
Create table #Mainsample
(ItemNum nvarchar(35), ItemDate datetime, OPType int)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510095','2015-05-01 18:38:48.840',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510094','2015-05-02 20:38:40.850',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510092','2015-05-02 21:40:42.830',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('353852061764483','2015-05-02 09:25:10.800',5)
[code]....
View 10 Replies
View Related
Mar 9, 2008
I have FirstName,LastName columns in the database.I need to return FirstName,LastName as Name to client(as a single column).
View 3 Replies
View Related
Jan 30, 2015
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
View 1 Replies
View Related
Nov 9, 2006
hi,
i am having 2 columns in a table in a dataset.
i want to add those two columns and bind the resultant total as a single column to the datagrid.
is it possible.
if yes, how o acheive this?
please help me.
thanks in advance.
muppidi.
View 1 Replies
View Related
Oct 8, 2007
Suppose that I have a table with following values
Table1
Col1 Col2 Col3
-----------------------------------------------------------
P3456 C935876 T675
P5555 C678909 T8888
And the outcome that I want is:
CombinedValues(ColumnName)
----------------------------------------------
P3456 - C935876 - T675
P5555 - C678909 - T8888
where CombinedValues column contains values of coulmn 1,2 & 3 seperated by '-'
So is there any way to achieve this?
View 1 Replies
View Related
Mar 3, 2015
I have a description field in a table which also stores unit of measure in the same column but with some space between them, I need to split these into two different columns.
For Eg:
Description
APPEARANCE UNIT
BDV KV
DENSITY KG/L
View 9 Replies
View Related
Oct 31, 2014
‘Trying to SELECT INTO a new table all columns of a table based on a DISTINCT value of one column so for example:
SELECT *
INTO new_table
FROM old_name
WHERE old_table.column IS DISTINCT’
View 4 Replies
View Related
Sep 17, 2015
How do i concatenate 24 columns with semicolon delimited into a single column without getting data conversion error ....
View 2 Replies
View Related
Apr 12, 2007
I hope i'm in the right place, but thanks anyway....
Actually i have 2 questions (regarding sql-server Indices/Keys):
1) I have an index, which is consisted of 4 columns.
I've read elsewhere that this index functions (as well) as an index (single column
index) on the first column of this multi-column index.
Does this mean that if i'd like to have (in addition) Indices on all of the 4 columns
seperately i need to define only 3???
2) I have a unique key consisted of multiple columns.
I'd like to save an index to this combination of columns as well (to speed up
things in DB...).
Does the definition of a multiple-columns key free me from defining the multiple-
columns index???
can anyone explain the main diference between Keys and Indices???
View 1 Replies
View Related
Aug 28, 2007
I have embedded a subreport in the detail section of my report. When I view the subreport in page preview mode it renders with three columns, but when it is rendered w/in the main report in page preview mode the 3 column layout is rendered as a single verticle column.
I've defined the columns in the Body/Columns. I have also set the report inteactivesize and pagesize heights in an attempt to remedy the issue. Margins are set to 0.
Any help is appreciated.
View 3 Replies
View Related
Apr 16, 2007
I hope i'm in the right place, but thanks anyway....
Actually i have 2 questions (regarding sql-server Indices/Keys):
1) I have an index, which is consisted of 4 columns.
I've read elsewhere that this index functions (as well) as an index (single column
index) on the first column of this multi-column index.
Does this mean that if i'd like to have (in addition) Indices on all of the 4 columns
seperately i need to define only 3???
2) I have a unique key consisted of multiple columns.
I'd like to save an index to this combination of columns as well (to speed up
things in DB...).
Does the definition of a multiple-columns key free me from defining the multiple-
columns index???
can anyone explain the main diference between Keys and Indices???
thanks,
Ran Kizi
View 3 Replies
View Related
Jun 4, 2014
I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years
I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,
Here is some data:
-- CREATE TABLE [dbo].[TEMP](
--[FileType] [varchar](19) NOT NULL,
--[dType] [char](2) NOT NULL,
--[dVersion] [char](2) NOT NULL,
--[Id] [char](25) NOT NULL,
--[MainDate] [char](40) NULL,
[code]....
View 5 Replies
View Related
Nov 25, 2015
I have 3 different companies that share the same ticket_types(CRMS System). I need to display the Ticket Types and the 3 company's Ticket Count:
Ticket Type | Company A Count | Company B Count | Company C Count
I can get the information individually for each company, but if a company doesn't have a ticket in one of the ticket_types, then it isn't displayed in a row. So, I tried to write the following, which isn't pulling back any data.
DECLARE @startdate date = '20150306'
DECLARE @enddate date = '20151031'
DECLARE @AcctGrp varchar(20) = '111'
;WITH TType
AS
(
SELECT ctp.description as TicketType
[Code] .....
If I run each SELECT individually from above (excluding the last SELECT), it works and I get the following:
TicketType
AR Request Credit
Availability/Rush
Cancel Order
Credit Card Payment
Expedite Order
Freight Quote
[Code] ...
How to get the query results? Am I even close to getting it right?
View 3 Replies
View Related
Sep 2, 2015
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
View 13 Replies
View Related
Feb 26, 2015
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
View 9 Replies
View Related
Jul 31, 2015
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
View 5 Replies
View Related
Oct 19, 2015
I'm working on a script to merge multiple columns(30) into a single column separated by a semicolons, but I'm getting the following error below. I tried to convert to the correct value. but I'm still getting an error.
Error: "Conversion failed when converting the varchar value ';' to data type tinyint".
select
t1.Code1TypeId + ';' +
t1.Code2TypeId + ';' +
t1.Code3TypeId + ';' +
t1.Code4TypeId as CodeCombined
from Sampling.dbo.account_test t1
where t1.Code1TypeId = 20
or t1.Code2TypeId = 20
or t1.Code3TypeId = 20
or t1.Code4TypeId = 20
View 4 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
May 22, 2014
Server is SQL 2000
I have a table with 10 rows with a varbinary column
I wish to concatenate all the binary column into a single binary column and then write that to another table within the database. This application splits a binary file (Word or PDF document) into multiple segments (this is Column2 as below)
example as follows
TableA
Column1 Column2 Column3
aaa 001 <some binary value>
aaa 002 <some binary value>
aaa 003 <some binary value>
aaa 004 <some binary value>
aaa 005 <some binary value>
desired results in TableB
Column1 Column2
aaa <concatenated value of above binary columns>
View 9 Replies
View Related
Jun 27, 2007
I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.
Can I do that??
Any reply showing me the right way is appricited.
-Thanks,
Digs
View 3 Replies
View Related
Oct 18, 2007
Hi!
I am designing a dimension table which will include a short name column based on the (full) name column. For example say Product dimension where I will have ProductName and ProductShortName. ProductShortName will be the first 6 characters of ProductName. I could populate ProductShortName using:
Substring in the select when I select from the original system, e.g. SUBSTR(PRODUCT_NAME, 1, 6) AS ProductShortName
Create a derived column in the SSIS flow which does the same thing
Create the ProductShortName column as a computed column which uses substring on ProductName
Create a trigger that populates ProductShortName based on ProductName when a row is inserted or updated
Create a named calculation in the table in the Analysis Services project's data source view
Create a named query in the Analysis Services project's data source view
I usually use 1, and 5 or 6 would only be used if I only will create reports against the cubes. 3 seems easiest to maintain, so I am thinking about using that one, but maybe it is slow for the data flow as I imagine it must be something like using 4, or when is the column "created" at runtime, i.e. when the table is queried?
Which approach(es) do or would you use? Pros and cons?
Thanks!
View 3 Replies
View Related
Aug 12, 2014
MS SQL 2008 R2
I have the following effectively random numbers in a table:
n1,n2,n3,n4,SCORE
1,2,5,9,i
5,20,22,25,i
6,10,12,20,i
I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.
if n1<10 and n2<10 then i=i + 1
if n4-n3=1 then i=i + 1
if more than 2 consecutive numbers then i=i + 1
So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.
declare @test1 int
set @test1=0
select top 10 n1,n2,n3,n4,n5,n6,
case when (
n1=2 and
n2>5
)
then @test1+1
else @test1
end as t2
from
allNumbers
View 5 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Jan 9, 2008
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
data_table
product_code month value
350 1 10
350 2 20
350 3 30
product_table
product_code profit_center
350 4520
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 20 30
My current query gives the following result
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 0 0
350 4520 0 20 0
350 4520 0 0 30
Any direction toward a solution would be appreciated. Am using SS2005.
View 5 Replies
View Related
Aug 2, 2013
Two tables:
table #1 = timestamp, servername1(never changes), value(int)
Table #2 = timestamp, servername2(never changes), value(int)
What I need to do is merge the two tables into a single table based on the matching timestamp:
timestamp, servername1, servername2 as headers then values under
"1/1/1-1:10:1" , "10" , "10" - as an example
"1/1/1-1:20:1" , "20" , "21" - as an example
"1/1/1-1:30:1" , "1" , "5" - as an example
Powershell or MSSQL 2008 queries work.
I have a powershell script atm that can create the table and then throw it back into the database but its very slow because of the amount of records.
The table is for some performance stat collection app.
Table #1 records a timestamp, the servername (which is the same over and over in the table) and the value of the performance object.
Table #2 is the same collection but for a different server.
The layout in the database is terrible but this is what I get to work with.
View 3 Replies
View Related
Sep 14, 2007
I'm working on a social network where I store my friend GUIDs in a table with the following structure:user1_guid user2_guidI am trying to write a query to return a single list of all a users' friends in a single column. Depending on who initiates the friendship, a users' guid value can be in either of the two columns. Here is the crazy sql I have come up with to give what I want, but I'm sure there's a better way... Any ideas?SELECT DISTINCT UserIdFROM espace_ProfilePropertyWHERE (UserId IN
(SELECT CAST(REPLACE(CAST(user1_guid AS VarChar(36)) + CAST(user2_guid AS VarChar(36)), @userGuid, '') AS uniqueidentifier) AS UserId FROM espace_UserConnection WHERE (user1_guid = @userGuid) OR
(user2_guid = @userGuid))) AND (UserId IN
(SELECT UserId FROM espace_ProfileProperty))
View 1 Replies
View Related
