Hi
I have a table with Records for employees and evry record has a record type now i need to have a
sum in the table footer or in a group for all employees of Amount Column when Record type is "E"
and the conditions is if this employee by RecordType "D" the amount column is not 0 else then
shuld be 0 is it posible with SSRS
Thanks
Jhknys
Does anyone know how to combine to columns into one using sql?
For example
Say I want to create a column3:
column1 _____ column2
------------------------------
primary _____ secondary
primary _____ [Non Applicable]
tertiary _____ quad..something
and IF column1 = primary AND column2 = secondary THEN column3 = newvalue
This is easy is access (and excel) but it doesn't seem to work in the same way in sql.
Hi,
I have a data flow task and trying to transform datas OLTP to STG db and i have lookup tables.
I do lookuping like this
first a lookup that lookup my table with connected input column parameter
second a derived column is connected to lookup's error output for when lookup can't find the value and this derived column returned "0" or "-1" this means that lookuped value can't find and insert this value to my table
third a union that union lookup and derived column
i want to ask this is there any different solution for doing this, because if i more than 5 or 6 lookup in my ssis package i add all of them derived columns and unions and when i change something i have to change or correct the unions step by step.
thanks
Hi,
I'm calculating matrix including totals in the database.
I would like to set a background color for all total cells.
For total cells with now dat in database I fail to put codiotional formating.
I use the following code:
=iif(Fields!Col1Desc.Value="Total", "#60759b", "Transparent")
For cells under "Total" columns that do not got any db value I got color "Transparent" and not "#60759b"
How do I recognize to which column or row a cell belong in a matrix even if it not a value that come from db but empty one?
for example, note the background color of the cell of Male, Total and 2006
I got that matrix:
Year
Gender
Employee Status
2006
2007
2008
Total
Male
Active
0
0
1
1
None Active
0
0
3
3
Total
0
7
4
11
Female
Active
6
5
5
16
None Active
5
3
7
15
Total
11
8
12
31
Instead of that:
Year
Gender
Employee Status
2006
2007
2008
Total
Male
Active
0
0
1
1
None Active
0
0
3
3
Total
0
7
4
11
Female
Active
6
5
5
16
None Active
5
3
7
15
Total
11
8
12
31
I have a field 'IsActive' which is bit type either 1 or 0. And in my package, the conditional split must be set something like
IsActive==0
And throws exception that condition evaluated as NULL where Boolean was expected. How i can make this work?
Hello everyone,
Is there a way in order to execute a subscribed report based on a certain criteria?
For example, let's say send a report to users when data exist on the report else if no data is returned by the query
executed by the report then it will not send the report to users.
My current situation here is that users tend to say that this should not happen, since no pertinent information is contained in the report, why would they receive email with blank data in it.
Any help or suggestions will be much appreciated.
Thanks,
Larry
I have the following code in the color property of a textbox. However, when I run my report all of the values in this column display in green regardless of their value.
=SWITCH(Fields!Wrap.Value >= 3, "Red", Fields!Wrap.Value < 3, "Green")
I already tried =iif(Fields!Wrap.Value >= 3 , "Red", "Green") and got the same results.
Is it because this is a matrix report? What am I doing wrong?
Thanks in advance . . .
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedI am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
View 6 Replies View RelatedI have a string variable
string str1="1,2,3,4,5";
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
Hi All,
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?
Pls clarify.
Regards
Venkat.
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View Related[RS 2005]
Given the starting and stopping points (time values), how do I generate values between these points.
For example, if I have 08 (representing Hour) as a starting point and 12 as a stopping point.
From this I would like to generate a data sequence like 08, 09, 10, 11, and 12.
So how do I accomplish this? In SQL or in the RS?
The only thing I can think of is using a WHILE loop and a temporary table in SQL (not to keen on doing this).
//Håkan
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
[code]...
Hi
I have one problem in SSIS for passing Variable Values while executing Package. I'm giving in details as below:
I opened Microsoft SQL Server Management Studio
Made Connection to Integration Services
To Execute Package I Right Clicked and Click on Run Package
Then I Clicked on Execute and package was executed successfully.
Problem is that if I try to Set Values then Package through Error
DTExec: Could not set ProcessMode value to M.
Basically I could not understand in which format I should pass the Variables.
What I tried is listed below:
ProcessMode;M
Package.Variables[User:rocessMode].Value;M
Package.Variables[ProcessMode].Value;M
But every time I got errors.
And then I tried from Command Line
DTEXEC /DTS "MSDBLoad_Order" /SERVER SERVERNAME /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V /SET Package.Variables[ProcessMode].Value;M
First time Process run successfully. And it has changed the ProcessMode to M also. But after that it was also not changing the ProcessMode Value to M.
Please help in regarding. I tried a lot from Site examples also, but could not get proper solution.
Thanks in advance
Bhudev
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
[CustomerId] [nvarchar](50) NULL,
[CustomeName] [nvarchar](50) NULL,
[CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
I want to aggregate to monthly values for the reading. I want to display Reading value for Oct 2010, November 2010 likewise My question is simple and I have tried to follow the etiquette.
Currently it is displaying.....
MeterIDReadingdateReading
3969 22/10/2013 0:150
3969 22/10/2013 0:300
3969 22/10/2013 0:450
3969 22/10/2013 1:000
3969 22/10/2013 1:150
3969 22/10/2013 1:300
3969 22/10/2013 1:450
3969 22/10/2013 2:001
3969 22/10/2013 2:150
MeterId int
ReadingDate datetime
Reading real
-===== If the test table already exists, drop it
IF OBJECT_ID('TempDB..#mytable','U') IS NOT NULL
DROP TABLE #mytable
--===== Create the test table with
CREATE TABLE #mytable
(
meterID INT PRIMARY KEY,
Readingdate DATETIME,
reading real
)
--===== Setup any special required conditions especially where dates are concerned
SET DATEFORMAT DMY
SELECT '4','Oct 17 2013 12:00AM','5.1709' UNION ALL
SELECT '4','Oct 17 2013 12:15AM','5.5319' UNION ALL
SELECT '4','Nov 17 2013 12:00AM','5.5793' UNION ALL
SELECT '4','Nov 17 2013 14:00AM','5.2471' UNION ALL
SELECT '5','Nov 17 2013 12:00AM','5.1177' UNION ALL
SELECT '5','Nov 17 2013 14:00AM','5.5510' UNION ALL
SELECT '5','Dec 17 2013 15:00AM','5.5128', UNION ALL
SELECT '5','Dec 17 2013 16:00AM','5.5758' UNION ALL
Output should display as
MeterId Period Reading
4 Oct 13 10.20
4 Nov 13 10.40
5 Oct 13 10.20
5 Nov 13 10.40
4 Dec 13 11.15
Bitmask fields! I am capturing row changes manually via a high frequency ETL task. It works effectively however i am capturing the movement of multiple fields. A simple example, for Order lines, i have a price, a discount and a date. I am capturing a 001, 010, 100 respectively for each change.
I would like my users to be able to select from a dimension which has the 3 members in it and they can select one, multiples, or all values (i.e. only want to see rows that have had the date and price changed).
Obviously if i only had 3 columns i would use bit's and be done with it, i have many different values (currently around 24 and growing).
A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
Hi
can somebody explain me how I can assign a NULL value to a datetime type field in the script transformation editor in a data flow task.
In the script hereunder, Row.Datum1_IsNull is true, but still Row.OutputDatum1 will be assigned a value '0001-01-01' which generates an error (not a valid datetime). All alternatives known to me (CDate("") or Convert.ToDateTime("") or Convert.ToDateTime(System.DBNull.Value)) were not successful.
Leaving out the ELSE clause generates following error: Error: Year, Month, and Day parameters describe an un-representable DateTime.
If Not Row.Datum1_IsNull Then
Row.OutputDatum1 = Row.Datum1
Else
Row.OutputDatum1 = CDate(System.Convert.DBNull)
End If
Any help welcome.
SQL 7
Hi All !!
I want to know how I can create conditional FROM WHERE clauses like below ..
SELECT X,X,X
FROM
CASE @intAltSQL > 0 Then Blah Blah Blah END
CASE @intAltSQL = 0 Then Blah END
WHERE
CASE @intAltSQL > 0 Then Blah Blah Blah END
CASE @intAltSQL = 0 Then Blah END
Thoughts ?
Thanks
Is anything similar to this possible without writing whole query in every begin block or without dynamic sql:
proc(@arg1 bit)
select * from table where x=y
if @arg1 = 1 begin
and when a=b
end
order by date
What does "conditional" mean as a command? sp_who2 reports this forsome sessions, along with "insert" etc.Thanks,Jim Geissman
View 2 Replies View RelatedHi,
Is it possible to have a conditional sum based on an item type existance in a set of values?
Example if i have the following set:
A
A
A
A
B
I just wanna sum B else if B doens't exist sum A
Best Regards,
Luis Simoes
Im faced with the following design issue..
on my site there are different profiles: a city profile, a restaurant profile and a user profile.
in my DB:City profiles are stored in tbCities cityID int PK shortname nvarchar(50) forumID int FK (...)
Restaurant profiles are stored in tbRests restID int PK shortname nvarchar(50) forumID int FK (...)
User profiles are stored in tbUsers userID int PK shortname nvarchar(50) forumID int FK (...)
as you can see a single ID value (for CityID,restID or userid) might occur in multiple tables (e.g. ID 12 may exist in tbRests and in tbUsers)Each of these profile owners can start a forum on their profile.
forumID in each of the above tables is a FK to the PK in tbForums:forumID intforumname nvarchar(50) (...)
Now imagine the following:
a site visitor searches ALL forums...say he finds the following forums:ForumID Forumname1 you opinion on politics2 is there life in space?3 who should be the next president of the USA?
a user may want to click on the forum name to go to the profile the forum belongs to.And then there's a problem, because I dont know in which table I should look for the forum ID...OR I would have to scan all tables (tbCities,tbRests and tbUsers) for that specific forumid,which is time-consuming and I dont want that!
so if a user would click on forumID 2 (is there life in space?)
I want to do a conditional inner join for the tablecontainingforumID (which may be tbCities,tbRests or tbUsers)
select tablecontainingforumID.shortname FROM tablecontainingforumID tINNER JOIN tbForums f ON t.ForumID=f.ForumIDwhere f.ForumID=2
I hope my problem is clear..any suggestions are welcome (im even willing to change my DB design if that would increase effectivity)