I have a simple update statement that will update one field, and that field is part of the primary key. During the update process, some of the rows will cause duplicate error. Is there a way to update the table and suppress the error? What I am looking for is a way to update the records that it can and ignore those it cannot. Right now, the entire process is terminated if duplicate error occurs.
View 2 Replies
I'm trying to suppress whitespace in a drilldown for textboxes that have suppress duplicates applied.
I have a matrix report that is showing whitespace in a drilldown because I am supressing duplicates. Based on what I read in other forums, if I set the ToggleItem to Len(FieldName)=0 that should supress the whitespace, right?
I can see that I have a field in the toggleitem called: Firstname. If I put the value Len(Firstname)=0 in the toggleitem property, then I get the error: The textbox 'textbox21' has Len(Firstname)=0' as a toggle item. Toggle items must be text boxes that share the same scope as the hidden item. I think the code 'Len' is throwing it off.
If I put the value "Firstname" in the toggleitem property, then it doesn't return the error, so I know that firstname is a valid value for toggleitem, but setting the value to firstname doesn't suppress anything.
If someone can tell me how to supress a textbox based on a value, then this may get rid of the whitespace I'm trying to suppress. Any ideas? Thanks...
i'm retrieving addresses from a database and displaying them in my report. i have an addr line 2 for addition address data if needed. i have placed this addr line 2 on its own detail row. however i do not want that row to display if there is no data. the following is happening even though i have set the visibility on the row and text field to =iif(fields!addr2="",false,true)
the name prints on the first line, the main address on the second line, i have a space where addr line 2 would have been, finally i get the city, state, zip on the last line.
expected outcome i would like is that addr line 2 does not appear for those addresses that addr line 2 does not have any data. if addr line 2 does have data then print.
any help would be greatly appreciated.
Chuck
Greetings,
I have setup a FormView which functions as it should but after the user input is updated, the table record stays unchanged, and when I trap the FormView1_ItemUpdated and look at the SqlDataSource1.UpdateCommand, it shows this:
UPDATE [aspnet_test] SET first_name = '', last_name = '', email = '' WHERE id = @original_ID
Here is most of the code I am using:<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DataKeyNames="id, first_name, last_name" OnItemUpdating="FormView1_ItemUpdating" OnItemUpdated="FormView1_ItemUpdated" > .. // my ItemEditTempate is here.</asp:FormView>
<EditItemTemplate>First Name: <asp:TextBox Text='<%# Bind("first_name") %>' runat="server" ID="author_name" Columns="20"></asp:TextBox><br />Last Name: <asp:TextBox Text='<%# Bind("last_name") %>' runat="server" ID="TextBox1" Columns="20"></asp:TextBox><br />E-mail: <asp:TextBox Text='<%# Bind("email") %>' runat="server" ID="TextBox2" Columns="20"></asp:TextBox><br /><br /><asp:Button ID="UpdateButton" runat="server" Text="Update" CommandName="Update" /><asp:Button ID="CancelButton" runat="server" Text="Cancel" CommandName="Cancel" /> </EditItemTemplate>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDBConnectionString1 %>"
SelectCommand="SELECT id, first_name, last_name, email FROM aspnet_test where id = 1"UpdateCommand="UPDATE [aspnet_test] SET first_name = '<%# first_name %>', last_name = '<%# last_name %>', email = '<%# email %>' WHERE id = @original_ID ">
<UpdateParameters><asp:Parameter Name="original_ID" Type="Int32" /></UpdateParameters></asp:SqlDataSource>
Any idea where the @original_ID is supposed to get its value from, or why does the SQL command shows blank fields?Thanks
Eric.
Is there any way to suppress the whole package from failing when a file is not found while doing an FTP get (other then setting the MaxErrorCount higher)?
My situation is that I know what a file is named but the file may not exist yet on the server. So, I use an FTP task to do a Get on that file. If the file does not exist then the FTP Task increments the error count even if I force the ExecutionResult and/or ExecutionValue.
This wouldn't be a very big deal but I am looping to getting and processing multiple files. It's acceptable that the file does not exist, but I want to be able to have the package actually error in other places. So far, the only thing I can do to stop the package from failing is setting the MaximumErrorCount for the Loop and the Package which isn't going to cut it.
I am hoping there is away around this without having to use a 3rd party FTP Task.
Thanks,
-Ryan
Hi,
I have a sequence container with a bunch of tasks in it. Right now, it's set up so that if any of the tasks in the sequence container "errors out" it sends out an email. However, there are certain tasks in the container that I would prefer NOT to send an error message out if/when they fail. How do I turn off the error message for certain tasks?
Thanks
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hello,
I would like to supress an Informational error that SQL is returning when I run a stored proc that I created. The error message returned is:
Warning: Null value eliminated from aggregate.
The values returned from the stored proc are the results from a 'select * from #tmp_tbl". Before returning the values, I simply create the temp table, populate it and then run the select statement. Prior to getting my results, I get the error message. Can I suppress it and how?
Thank you.
In database projects, VS2015, I want to create some views for me database that will reference another database table using 3 part naming reference.
Works fine in SSMS but when I try and build me project I is throwing up a reference error.
I can't import the other database into this project, so is there a way to suppress the error? I don't really want to exclude these view from the project.
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
My SSIS solution has about hundred packages and time to time I have to edit a package. I understand I could use 'Build' command to compile only updated package, as opposed to Rebuild which recomplies all of the packages.
Nevertheless, in both cases SSIS opens all of the packages in design environment before compilation. My packages are saved in SourceSafe and that process takes quite long and I was wondering if there was any other way to compile only updated package where none of the other packages are opened during Build/Rebuild process? For example we could use dtutil to deploy only updated packages without running Package Installation Wizard.
as title.
Thanks.,
Kelvin Jor
I want to display my problem. I have a cube that connected to hive DB through views. There are some changes that apply to  some related tables on hive. This changes reflect on the cube so i make full process for the cube. I want to process only partitions that have been changed without full process. I detect changes on this table on another table on the local database.
View 3 Replies View Related
hi,
I'm using a OLE DB COMMAND component to perform an update (SQL statement) but the procces takes about 9 hours, so I changed it to a stored procedure but it was the same, I need to update about a a million of rows and the package is very simple.
How can I improve the time, Can I use another component or startegy?
thanks
In the SSIS Analysis Services processing task, I was wondering if
anyone knows why some dimensions do not have the Process Update option
in the list of options for processing them? If there is
only Process Full, Process Data, and Unprocess, I am not sure how
I can do incremental updates without scripting.
Also, will this affect the cubes if a full process is performed?
Any help is much appreciated!
I've a weird problem in my application. In of the pages, while trying to update the text box "Name", when I enter Linda's test, it gets saved as Linda''s test. I'm not sure if this is a problem due to SQL server. When I look at the stored procedure, I don't anything different. Also, when I update the table directly in SQL Server, the result is displayed in single quote. But if I update the field thro' the application, the returned name is with double quotes instead of single quote. Has any of you faced problems like this? What am I missing? What do I need to do to get the name saved the way I entered (with single quotes) instead of double quotes?
View 1 Replies View Related
Microsoft SQL Server 2005 Setup
-------------------------------------------------
The setup failed to get IID_IIMSAdminBase object. The error code is -2147467262.
Hi there,
I have checked every possible site for this error but unable to find any solution. I received the above alert message during the installation of SQL2k5, Reporting Services. I am using window xp with sp2.
When click OK to alert box then it rollback all installed components of Reporting Services.
Please help.
Cheers,
Zafar.
I can use SQL Server Management Studio Express to connect to my local database SQL 2005 database on bknjisqlexpress.
I am also able to connect to the database from Visual Studio, and this is where I copied the following connection string to be used in my C# code
string myConnectString = "Data Source=BKFNJI\SQLEXPRESS;" +
"Initial Catalog=cmiCompatibilityDataBase" +
"Integrated Security=True;Pooling=False";
// specify SQL Server Specific Connection string
SqlConnection cmiDBCompConnection = new SqlConnection(myConnectString);
cmiDBCompConnection.Open();
when I attempt to run the apps, I get the
"System.Data.SqlClient.SqlException was unhandled
Message="A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)".....
any idea what I am doing wrong, given that the connection string works using other means? I am using Windows authentication.
To add, the error in my log shows:
2007-03-17 21:10:55.82 Logon Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <local machine>]
Thanks,
Klaus
Hi everybody,
I'm trying to backup a database of 330 GB more or less from my server to an external hard disk connected by optical fiber and I'm receiving the next error:
[SQLSTATE 01000] (Message 3211) Write on "H:sqlbackuppm_import" failed: 33(The process cannot access the file because another process has locked a portion of the file.) [SQLSTATE 42000] (Error 3202) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Any idea??
Thanks!
Is there a way to suppress a text box if there is no data to display. I've created a letter that may or may not have address2 address3. The format looks odd with a bunch of blanks lines in the company info section. I use to be able to do this in crystal don't know how to do this in SRS.
Thanks
guys,
I have a stored procedure which gets called by ASPX page and it inserts, updates data into different tables. originally, I had a issue that if error occured, it would not rollback all the data so i used transaction around it. now, once in a while I am getting this error "System.Data.SqlClient.SqlException: Transaction (Process ID 181) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction".
I don't know how this error occurs and how do I prevent it. please help.
transaction is as follow.
BEGIN TRY
BEGIN TRANSACTION
// t-sql codes to insert update multiple tables
COMMITEND TRY
BEGIN CATCH
if (@@TRANCOUNT > 0) --error
ROLLBACK
declare @errSeverity intselect
@errMsg = ERROR_MESSAGE(),
@errSeverity = ERROR_SEVERITY()
RAISERROR(@errMsg, @errSeverity, 1)
END CATCH
Hey guys. I am creating an app that uses the RMO Merge Replication objects.
So far it can subscribe and unsubscribe just fine but when it comes to the syncing process it gets a little weird, here's why.
- If I run the SQL GUI Sync tool, it sinks fine. So that setup is working.
- When I run the C# App it blows up witht the error: "Process cannot connect to Distributor"
- Here's the weird part: When I set a breakpoint on my custom method SyncData (this method sets up the connection info and properties and then calls Syncronize( ) ) and step through the code when it gets to Syncronize( ) it runs perfectly fine, no execeptions.
I thought that maybe the Syncronize( ) method was being called too fast before the connection properties got to fully setup and connect, so I added a Thread.Sleep( ) method for 10 secs after each connection call and just before calling Syncronize( ). It still didn't work. My class is a static class by design, however, I changed it into an ordinary class and then placed the connection info in the constructor hoping it would do it's connection when the object gets initialized, that didn't work either.
If someone could please help me out with this I would greatly appreciate it.
Here's my code:
using System;using System.Collections.Generic;using System.Text;using Microsoft.SqlServer.Replication;using Microsoft.SqlServer.Replication.BusinessLogicSupport;using Microsoft.SqlServer.Management.Common;using System.Windows.Forms;using System.Threading;namespace Emds.Briefcase.BriefcaseSubscriber.BLL{ public class SyncDataClass { #region Members private static string m_statusMessage = string.Empty; private static byte m_percentComplete; public delegate void StatusTextChangeHandler(int percent, string status); public static event StatusTextChangeHandler OnStatusChange; #endregion Members #region Methods public static string SyncData() { //Delay(); // Define the server, publication, and database names. string publicationName = "Chart"; string publisherName = @"JSMITHSQL2005"; string subscriberName = @"JDOESQL2005"; string subscriptionDbName = "DataSubscriber"; string publicationDbName = "DataPublisher"; string message = string.Empty; // Create a connection to the Subscriber. ServerConnection conn = new ServerConnection(subscriberName); MergePullSubscription subscription; try { // Connect to the Subscriber. conn.Connect(); // Delay(); // Define the pull subscription. subscription = new MergePullSubscription(); subscription.ConnectionContext = conn; //Delay(); subscription.DistributorSecurity.WindowsAuthentication = false; subscription.DistributorSecurity.SqlStandardLogin = "sa"; subscription.DistributorSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.PublisherName = publisherName; subscription.PublicationDBName = publicationDbName; subscription.PublicationName = publicationName; subscription.PublisherSecurity.SecurityMode = ReplicationSecurityMode.SqlStandard; subscription.PublisherSecurity.SqlStandardLogin = "sa"; subscription.PublisherSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.DatabaseName = subscriptionDbName; subscription.SubscriberSecurity.WindowsAuthentication = false; subscription.SubscriberSecurity.SqlStandardLogin = "sa"; subscription.SubscriberSecurity.SqlStandardPassword = "russell"; // Delay(); // If the pull subscription exists, then start the synchronization. if (subscription.LoadProperties()) { // Check that we have enough metadata to start the agent. if (subscription.PublisherSecurity != null || subscription.DistributorSecurity != null) { // Synchronously start the Merge Agent for the subscription. subscription.SynchronizationAgent.Status += new AgentCore.StatusEventHandler(SynchronizationAgent_Status); // Delay(); subscription.SynchronizationAgent.Synchronize(); message = "Data Syncronization is a success!"; } else { throw new ApplicationException("There is insufficent metadata to " + "synchronize the subscription. Recreate the subscription with " + "the agent job or supply the required agent properties at run time."); } } else { // Do something here if the pull subscription does not exist. throw new ApplicationException(String.Format( "A subscription to '{0}' does not exist on {1}", publicationName, subscriberName)); } } catch (Exception ex) { // Implement appropriate error handling here. throw new ApplicationException("The subscription could not be " + "synchronized. Verify that the subscription has " + "been defined correctly.", ex); } finally { conn.Disconnect(); } return message; } static void SynchronizationAgent_Status(object sender, StatusEventArgs e) { m_percentComplete = e.PercentCompleted; m_statusMessage = e.Message; //Fire custom event if (OnStatusChange != null) { OnStatusChange(m_percentComplete, m_statusMessage); } } #endregion Methods }}
Hi
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
Does anyone know what the problem could be?
Thanks
When i am trying to run a report model. I am encountered with the following error.
Can anybody help me out in resolving this error.
Error: the server could not process the data
thanks
I had to un-install and re-install SQL Server 2005 for a different problem which has been resolved.
But now when I try to make a connection to the database I get the following error:
"...No process is on the other end of the pipe"
I have verified that the server allows named pipeing which seems to be the common answer I found after searching. I have also verified that the account I use is setup and has all the proper permissions.
Can someone help me in resolving this issue noting what I have verified above???
Thanks...
While MOM processes are running at some point, a process goes into deadlock and uses up all existing CPUs.
Sysprocesses shows this it opened up 4 threads and program name is Microsoft® Reliability Analysis Service.
Profiler doesn't show which command it was trying to execute, but last notable command which has started was MRAS_pcLoad EXECUTE @i_Return_Code = sp_getapplock @Resource = N'MOM.Datawarehousing.DTSPackageGenerator.exe', @LockMode = N'Exclusive', @LockOwner = N'Session', @LockTimeout =
Can you please help us, what could be the problem. It has been running fine till couple of days back.
--Prabhu
Hello, I have 3 servers sql 7 sp3, 1 editor, a distributor and an subscriber. the base on the editor is removed, how to make to remove all traces of replication on the distributor and the subscriber.
thank you. Pascal
I wrote a stored procedure that executes a dbcc sqlperf(logspace) statement many times. Therefore, I would like to suppress the output, "DBCC execution completed...". Can this be done? I have checked Books Online for a trace flag or set command to no avail.
View 1 Replies View RelatedI just scanned the OSQL articles in BOL and I am not sure if there is a way to do this but I want to suppress the empty black DOS windows when calling my batch files that contain osql commands. Any ideas?
View 2 Replies View Related