Running SQL 7, Standard version. I had a database marked 'suspect'. I copied the MDF and LDF files to another directory, then deleted the suspect database. I tried to create a new database and attach the MDF file to it. It did not work. Any other ideas? I have no other backups of the data. I am willing to pay for consulting over the phone if necessary.
View 1 Repliestoday my database is (suspect)and not able to connect to the database.so i have excite this code
EXEC sp_resetstatus [YourDatabase];
ALTER DATABASE [YourDatabase] SET EMERGENCY
DBCC checkdb([YourDatabase])
ALTER DATABASE [YourDatabase] SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB ([YourDatabase], REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE [YourDatabase] SET MULTI_USER
and then it worked but some of new rows are deleted can i restore this rows ??
Hi
I want to suspect database
stop server first
I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav
and then start the server
use command to check:
SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name
if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status
do you know how to set database suspect with this way, or do you know other way to suspect databse.
absolutely,I could re-back my server noraml with your way
Thanks
I have a question regarding ROLLUP and how to use the operator.
I've been asked to retrieve a list showing the total repair cost per year displaying Transport Type, Manufacturer and Transport. The query I used is:
SELECT ty.Description AS TransportDescription,
t.SerialNumber AS Transport,
ty.Manufacturer,
SUM (r.RepairCost) AS RepairCost,
YEAR(r.EndWorkDate) AS [Year]
[Code] .....
How could I use the rollup function to display subtotals per Transport Type, Manufacturer and Transport?
Hi there.
I have a corrupt .sdf database sat on a SD Card but i am unable to find a way to repair it.
So far I have tried a few different methods, most of which just tell me what i already know i.e. "the database is corrupt and needs repairing!!"
I am unable to open the file in SSMS object browser (see above message) which means i cant run repair / shrink utilites.
I am also unable to add the database to a vs2005 project (again see above message) meaning again i can't run any repair utilities.
I have also tried using the compact / Repair utility in Query analyser 3.0 on my Windows Mobile 5.0 PDA but once again i am greeted with an "error reading file - Run the Repair Utility" Message.
Lastly i've tried using the SQLCEengine.repair method and, depending on whether i do it on the PDA or on a desktop pc it throws the exceptions "Error occurred reading database file - run the repair utility"(PDA) or "invalid database type" (PC)
Can anyone shed any light as to whether there is another (easier???) way of doing this or if i just have to face it that this file is lost?
Thanks
ps. the code i used for the .repair is as below:
Dim conn As SqlCeEngine
Dim strdb As String
strdb = "SD CardPathnameDatabase.sdf"
conn = New SqlCeEngine(String.Format("Data Source={0}", strdb))
If conn.Verify = False Then
conn.Repair(Nothing, RepairOption.RecoverCorruptedRows)
MsgBox("Successfully Repaired")
End If
I started getting errors everytime i try to access my webmail(horde), my zencart and my forum so i asked my website host and they say i need to repair the SQL database. I have no idea what this means, can someone help please?
The errors are:
Horde: A fatal error has occurred
Could not connect to database for SQL SessionHandler.
Details have been logged for the administrator.
Zencart: 0 DB_ERROR_NOT_CONNECTED
in:
[db_cache table]
If you were entering information, press the BACK button in your browser and re-check the information you had entered to be sure you left no blank fields.
SMF Forum: Connection Problems
Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
Please help, i am totally lost!
I am backing up SQL 6.5 DB using Backup Exec 7.2 on NT 4.0 server SP4 with SQL server agent. The backup job ends in Failed status and a warning that DBname is corrupt. I then try to run DBCC Checkdb, newalloc, and checkcatalog commands to repair the DB. No further ahead yet. Are there any other commands that I can perform on the DB so that the corruption can be repaired, or verified there indeed is corruption of DB?
View 1 Replies View RelatedI'm an Access man moving towards SQL Server and I'm interested in knowing if there is a utility for my SQL Server version 7 database that is similar to Access' Compact and Repair utility? I'd like a recommendation from a guru on what Prevenatative Maintenance measures I should be running daily/weekly/monthly etc...
Thanks in advance.
dog
I want to use function "Compact and repair database" in SQL Server2000 which like function Access 2003.
How can i do ?
Thank you very much.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedHow can I repair the database (5 gb) and remove the transaction log (45 gb). Whenever I run the maintanence wizard, it corrupts the db and I have to restore the db. Whenever I try to shrink the transaction log, the query runs but it doesn't shrink it at all. Is there a manual method for either of these and if so, how?
View 1 Replies View RelatedIf we restore a database (full backup) first and continuously apply its transnational log backups, do we end up with two identical databases at page level eventually?
If so, page level repair to principle server may work as documented. I can see SAN level mirroring will give you exactly two identical databases at page level eventually at some point of time.
I can see Sybase device (in MS word file) level mirroring will give you two identical things at page level for same device.
But applying the transcriptional logs sequentially on the other servers, can SQL Server guarantee these two databases are identical at page level given there is server configuration can be different?
One of our clients gets the following error when trying to backup a database:
View 6 Replies View RelatedIs it possible to try repair a database without being attached, giving the path to the files?
I'm trying to attach a database that i recover from a disk, and i'm not able to attach, gives me an error, saying i should do a db check.
Hi all,
Long time ago, I downloaded the Northwind and pubs databases from the Microsoft website (I do not remember the details of it) and installed these two databases together into the SQL Server Management Studio Express of my PC (Microsoft Windows XP Pro). I tried to learn an example of using "User Instance" (source code was from a book) on the Northwind database located in my SQL Server Management Studio Express. I just find out that my Northwind database has the title only and no tables at all. If I click on the "+" in front of the "Northwind", I got the following error message:
Microsoft SQL Server Management Studio Express
Failed to retrieve data for this request.(Microsoft SqlServer.Express.SmoEnum)
Additional information:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from backup. (Microsoft SQL Server, Error: 5173)..
Please help and tell me how I can repair this Northwind database in my SQL Server Management Studio Express.
Scott Chang
P. S.
I deleted the name 'Northwind' in my SQL Server Management Studio Express, executed the "SQL2005DBScriptsInstnwind" program and I got the following error message: Msg 1802, Level 16, State 4, Line 1
CREATE DATABASE failed. Some file name listed could not be created. Checked related errors.
Msg 5170, Level 16, state 1, Line 1
Cannot create file 'c:Program FilesMicrosoft SQL ServerMSSQL.1DATAorthwindorthwind.ldf' because it already exist. Change the file path or the file name, and retry the operation.
Msg 15100, Level 16, State 1, Procedure sp_dboption, Line 64
The database 'Northwind' does not exist. Use sp_helpdb to show available database.
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'Northwind'. No entry found with that name. Make sure that name is entered correctly
Hi,
Please Help, I am very desparate for a solution to this one.
I have an error appearing
"Error 25115 Wrong Page (potential database corruption). Try Running the Repair Utility."
I have SQL Server Enterprise set up with Merge replication, it is being used to Sync with Windows Mobile Devices as the subscribers.
All the Windows Mobile subscribers have been synchronising fine up until recently, when 1 of the Subscribing Windows Mobile devices received this error.
The day after, another device Synchronised fine the first time (note that the Synchronisation was a long one and the SDF grew in size dramatically while the synchronisation occured, but the Sync worked fine and the SDF dropped back to its initial size) The 2nd sync 5 mins later failed however so this Mobile device has the same error also.
Any suggestions as to the below are much appreciated
a) Why this error occurs?
b)How do you resolve this error?
c)What is the Repair utility mentioned in the error, and is it of use to me?
Thanks in advance, I am very greatful for any advice.
I created the db with the attached script and I am able to access ituntil I reboot the server. I've tried enabling flag 1807 via the SQLserver service and the startup parameters of the instance. In allcases the database always come up suspect after a reboot. There wasone instance where I was able to recover, but I am not sure how thathappened.Does anyone have an idea of how I can reboot the server without thedatabase becomming suspect?USE MASTERGODBCC TRACEON(1807)GO--DBCC TRACEOFF(1807)--DBCC TRACESTATUS(1807)GOCREATE DATABASE ReadyNAS ON( NAME = ReadyNAS_Data,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Data.mdf',SIZE = 100MB,MAXSIZE = 20GB,FILEGROWTH = 20MB)LOG ON ( NAME = ReadyNAS_Log,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Log.ldf',SIZE = 20MB,MAXSIZE = 100MB,FILEGROWTH = 10MB)
View 5 Replies View RelatedMy database is marked as suspectI am using SQL Server 2000,I ran the command sp_resetstatus it executes succesfully. but still the database is in suspect state.can any one tell me how i recover my data.thanks in advance
View 1 Replies View RelatedIm running SQL 7.0 with a large heavily used 4Gb database. After a while the database is marked suspect. What can be the cause to this ? Please email me and I can send you additional information about hardware and the system.
View 3 Replies View RelatedHi everyone,
I really need help on this, one of my databases is marked suspect. I did tried to execute this command below (scripts):
use master
go
sp_configure 'allow updates',1
go
reconfigure with override
go
update sysdatabases set status=4 where name='security'
go
sp_configure 'allow updates',0
go
reconfigure with override
go
and it release the suspect from the 'Security' database, but it Won't let me access the table,data or nothing. The worse thing is when I stop & start the server again, the database marked suspect again.
Could anybody out the help me on this. Thank in advance, Vu
I am using SQL server 6.5 sp3 and NT 4.0 sp4.
My SMS database has been marked suspect.
I do not have a backup.
I have read several articles about trying to us sp_resetstatus.
I can not find this sp on my server.
When I try the following:
UPDATE master..sysdatabases status=256 WHERE name = ('sms')
I get the following back:
Ad-hoc updates to system catalog not enabled. System Adminstrator must recongifure system to allow this.
I have searched Microsoft KB and everywhere I can think of. If anyone can help I would really appreciate it.
I even tried reapplying sp3 and rebooting...this did not help either.
Can someone please tell me how to change the status back to normal.....I think this is a it will take..
thanks in advance,
nathan
I have the original dat files ( 2 seperate log / data) of a database. I have created new devices (same size as originals) and a new database. I replace the new dat files with the originals and the database always comes up as a suspect. I have done this with the other 7 databases on my server and none have similar problems. This database was created different then others using new database and new devices routine rather than creating the devices first. Any Ideas?
Thanks in Advance.
Hi... I have this problem with my database (dunno how this thing happen). Today, 2 of my databases have been marked as 'suspect' (grey color in SQL Enterprise Manager). In ISQL, when I try 2 connect 2 the database (use), the message '
Msg 926, Level 14, State 1
Database 'MYUAT' cannot be opened - it has been marked SUSPECT by recovery. The SA can drop the database with DBCC.'
appeared.
Don't understand Y this occurred...
Thanks in advance for any help...
~Cheers~
my database is in suspect,how to correct it?
thx in adance..
Hi all,
We recently had some kind of error on one of the server's hard drives. The network guys, reinintialized (or something) and were able to bring everything back. However, two of my databases now is "Suspect" and can't be used. Both the MDF & LDF exist, and there are no indications of actual data loss. What can I do with a "suspect" database ? SQL 2K
What should I do to recover these two databases?
Thank you for all your suggestions.
I could not open my database.It says its Suspect and could not open and not displaying any of the objects
What should be the reason and what is steps i can do make it up and running.
Thanks
:mad:
One of my prodn databases went into suspect mode today..
I was able to recover it.
The tech support guyz had rebooted the server couple of times
(out of ignorance) cos they thought if wud fix it.
I lost the sql errpor log file which had the error details as to why db when into suspect....so my questions are..
1. Probable reasons why db when into suspect mode.
2. Any other way to find out about the error details.
3. When I ran dbcc checkdb with repair_rebuild option
for some tables it gave error
"Parent node for page (1:13075) was not encountered"
How can i resolve the consistency errors.
Is DBCC CHECKTABLE sufficient.???
We have an SQL Server 2000 DB server with several databases on it. Frequently, one of the DBs will have a state of "Suspect." This appears to occur after our 3rd party backup software runs a full backup on the weekends.
How can I begin to troubleshoot the cause of this issue? Has anyone seen anything like this?
thanks,
Jeff
Why do i keep getting this error ?
Mary Mary
Yes O !
Hi everyone,
I hope you could help me.
I have a database that was marked as suspect, i change is state but now i want to extract the information of the database and a couldn't because de database have several erros include 2 allocation erros.
How could i solve this problem? I don't have a recent database backup.
thanks to everyone.
Pedro Silva
Hi all,
I have a suspect database caused by a disk error on a Raid5 disk. I'm a bit of a novice on SQL and am using SQL 2005. I have tried the following and can't get the database status to reset which means the DBCC checkdb command does not run. The client I am fixing this for has no backup of the data at all.
USE master
GO
sp_configure 'allow updates', 1
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sp_resetstatus 'nhd2007';
GO
sp_configure 'allow updates', 0
GO
RECONFIGURE WITH OVERRIDE
GO
DBCC checkdb ('nhd2007',NOINDEX);
GO
I get the following error back:-
Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
The suspect flag on the database "nhd2007" is already reset.
Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 926, Level 14, State 1, Line 3
Database 'nhd2007' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
The error in the SQL Log which is causing all the problems is:-
Message
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:3425329; actual 25600:1744858624). It occurred during a read of page (1:3425329) in database ID 24 at offset 0x00000688862000 in file 'E:hd2007hd2007.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Any advice on what I can do to get some access to the data would be great.
Thanks
Okay, so i have a tabase named "TEST" that i set up, everything in it is for a website i've been designing slowly for the last month, i come in today, and notice the database is marked suspect. look at the log and i see all of this:
Recovery of database 'Test' (7) is 20% complete (approximately 305 more seconds) (Phase 2 of 3).
ForwardLogBlockReadAheadAsync: Operating system error 23(Data error (cyclic redundancy check).) encountered.
Operating system error 23(Data error (cyclic redundancy check).) on device 'C:Program FilesMicrosoft SQL ServerMSSQLdataTest_Log.LDF' during ForwardLogBlockReadAheadAsync.
Error: 3313, Severity: 21, State: 2
Error while redoing logged operation in database 'Test'. Error at log record ID (8440:42526:1)..
Error: 3414, Severity: 21, State: 1
Database 'Test' (database ID 7) could not recover. Contact Technical Support..
Now, honestly, i could care less about the data, the thing the matters most to me, is the couple of stored procedures i've developed.
what can i do?
Hi all , i am facing a problem and don't know how to handle the issue. I created a database in sql server 2000 , gave it to a friend who made certain changes to the database and mailed me back.
Now that i try to open the database , in the enterprise manager the icon of the my database is gray with "suspected" written in brackets after the database name. On expandin it , it shows ("No Items"). Kindly help me out guys , i am totally stuck for the moment.
Regards