Suspect Mode Being Invoked
Sep 13, 2001
can anyone tell me what would casuse this error:
2001-09-12 21:21:01.11 kernel udopen: Operating system error 32(The process cannot access the file because it is being used by another process.) during the creation/opening of physical device C:MSSQL7dataReporting.mdf.
2001-09-12 21:21:01.11 kernel FCB::Open failed: Could not open device C:MSSQL7dataReporting.mdf for virtual device number (VDN) 1.
What other things would cause the Reporting.mdf to be locked so the SQL server could not open it?
View 2 Replies
ADVERTISEMENT
Jul 27, 2015
how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
View 5 Replies
View Related
May 12, 2000
I have a database in suspect mode. There is no backup of this database.
I've followed the troubleshooting and it isn't working out.
There are 3 steps:
1. execute sp_resetstatus
2. use alter database to add data file or log file to the database
3. stop and restart SQL Server
4. free disk space and rerun recovery
I've tried to make it, but the step # 2 haven't worked.
Then I tried step 3, however the database is still in suspect mode.
What should I do?
Is there something I am missing?
Thanks,
Fábio
View 1 Replies
View Related
Apr 19, 2004
Hi
my database went into suspect mode. i tried to reset the status database by "sp_resetstatus abc". It is giving the message
"Prior to updating sysdatabases entry for database 'cr2db', mode = 0 and status = 260 (status suspect_bit = 256).
For row in sysdatabases for database 'cr2db', the status bit 256 was forced off and mode was forced to 0.
Warning: You must recover this database prior to access."
please let me if you have any solution to this problem.
thank you in advance
ricky
View 14 Replies
View Related
Sep 6, 2007
Hi,
I have mssql 2005 installed and i see that MSDB database is marked as suspect. I almost tried all the steps which are submitted in the forums.
1) I shut down the server, navigating to the directory 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn' and doing the following: start sqlservr.exe -c -T3608
2) renamed the damaged msdb files (msdbdata.mdf and msdblog.ldf in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' directory)
3) Run the instmsdb.sql script in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall' directory
--x---
When I executed third step it returned me below error:
Msg 926, Level 14, State 1, Line 63
Database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Please advice me.
View 10 Replies
View Related
Feb 26, 2002
Hi,
Could anyone please tell me steps to recover the database from the suspect
mode. The backup I got is very old. Can it be recovered without the backup.
Thanks in advance
John Jayaseelan
View 1 Replies
View Related
Apr 13, 2001
Hi,
When i tried to restore database from the Network m/c ...upto 60% of the restoration process went well,But after that i got message saying that
" Communication link failure " then database went in to LOAD/SUSPECT mode,
This happend in Active/Active Cluster environment and at the same point of time Fail over occured and resources moved to other node.
i tried by running SP_RESETSTATUS stored procedure to change the status of the Database ,But no use...
Then i deleted the Database and recreated and restored.. because it was a test server...BUT if it happens in Production what to do?????.....
Is there anyway to over come such situations...
Thanks in advance
Mar R
View 1 Replies
View Related
May 29, 2001
Mu MSDB database is in suspect mode. Anyone have any info to help get it out. It tells me that it cannot find the path specified for the backups, yet the path exists and there is more than enough disk space even though it says that there is not? I am confused. First time getting this error and doesn't make sense why.
Thanks!
View 1 Replies
View Related
Sep 21, 2007
Dear Experts,
I'm using sql server 2005, and now i'm trying to restore with one backup. then i'm getting error saying that MSDB database in suspect mode.
how to make the DB to the normal mode....
please help me in this regard
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 1 Replies
View Related
Apr 19, 2007
Database is in suspect mode and I cant get it out. Customer does not have a backup.........
getting Errors starting
Analysis of database 'SBM01' (7) is 100% complete (approximately 0 more seconds)
ex_raise2: Exception raised, major=79, minor=87, severity=22, attempting to create symptom dump
Error: 7987, Severity: 22, State: 1
A possible database consistency problem has been detected on database 'SBM01'. DBCC CHECKDB and DBCC CHECKCATALOG should be run on database 'SBM01'.
ex_raise2: Exception raised, major=79, minor=87, severity=25, attempting to create symptom dump
Using 'dbghelp.dll' version '4.0.5'
*Dump thread - spid = 51, PSS = 0x19b591e0, EC = 0x19b59510
*
* User initiated stack dump. This is not a server exception dump.
Error: 3314, Severity: 21, State: 3
Error while undoing logged operation in database 'SBM01'. Error at log record ID (222:9976:477)..
Error: 9004, Severity: 23, State: 2
An error occurred while processing the log for database 'SBM01'..
Error: 3414, Severity: 21, State: 1
Database 'SBM01' (database ID 7) could not recover. Contact Technical Support..
View 16 Replies
View Related
Jun 12, 2006
In SQL 2005 when a database is in suspect mode there is no obvious way to tell (via SSMS). In SQL 2000 the word "suspect" was displayed (via Enterprise Manager) next to the database, and the respective database icon was grayed out. Why was this behavior changed for SQL 2005? From a disaster recovery standpoint, it is very important to see immediately if a database is in suspect mode.
View 9 Replies
View Related
Jun 1, 2015
In the work I came up against a situation when the working database at the end of day went to the Suspect Mode.And the archive was in many hours before. To transfer it in normal mode, until isn't made repaired base it was impossible. DBCC checkdb also refused to run because the database is in this mode.
View 7 Replies
View Related
Oct 18, 2006
Rajiv Parekh writes "Since last few weeks on Startup of System few Databases moves to SUSPECT MODE.
This probelm is not daily but atleast 0nce in week.The day is is not fixed. Have Unistalled SQL & again Reinstalled, but the problem continues.
Please inform my Why this problem & what is the Solution."
View 3 Replies
View Related
Apr 25, 2007
hi all,
one of my sql database went in suspect mode can any one advice why it has happened is it the problem with sql server . This has happend for the second time in 4 months .
thanks and regards
jk
View 3 Replies
View Related
Apr 24, 2015
As I know the database should be restored from backup and logs reapplied. That’s the first and generally recommended approach any time a DB is suspect, whether it’s from log or data file corruption.But if I have no backups then we follow below steps ( after Googling I found these steps on most of the websites ):
1.EXEC sp_resetstatus ‘yourDBname’;
2.ALTER DATABASE yourDBname SET EMERGENCY
3.DBCC checkdb(’yourDBname’)
4.ALTER DATABASE yourDBname SET SINGLE_USER WITH ROLLBACK IMMEDIATE
5.DBCC CheckDB (’yourDBname’, REPAIR_ALLOW_DATA_LOSS)
6.ALTER DATABASE yourDBname SET MULTI_USER
Now my question is,Â
1. If after executing DBCC CHECKDB at 3rd step, it shows inconsistency.Then I will execute SET SINGLE USER WITH ROLLBACK & if after executing DBCC CHECKDB at 3rd step, no errors found. Then what will be the steps?
2. When we execute DBCC CHECKDB (' DBNAME ', REPAIR_ALLOW_DATA_LOSS) how can we recover lost data during process.As far as I know some data will loss and if it will happen then business will get suffered.
3. Why run DBCC CHECKDB() WITH REPAIR_ALLOW_DATA_LOSS if there are no consistency errors in the database?
View 8 Replies
View Related
Jan 14, 2015
I Want to test for Automatic switch between primary and secondary.
How do i do it ?
or
I need this for some purpose : How to set suspect mode for a database ?
View 1 Replies
View Related
Mar 14, 2007
Hi experts,
I was trying to restore a "mdf" (MSDE) database for a HP OpenView product, unfortunately at the initial state of restoration, i got the following error messages:
Database 'openview' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Any valuable suggestions on how to set/change the current "SUSPECT" mode so that the 'openview' database can be opened?
Many thanks,
Cheng
View 2 Replies
View Related
Apr 29, 2008
Hi
I want to suspect database
stop server first
I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav
and then start the server
use command to check:
SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name
if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status
do you know how to set database suspect with this way, or do you know other way to suspect databse.
absolutely,I could re-back my server noraml with your way
Thanks
View 6 Replies
View Related
May 6, 2004
Hi,
When I invoke a session in SQL Server I would to create few temp tables. I have got the queries in a file. Is there any way to invoke these queries (Creating Temp tables) whenever I invoke a session.
Any suggestion/guidence would be greatefully received.
Regards,
SAM
View 2 Replies
View Related
Jul 23, 2005
Hey everyone --I've been having this problem for a couple weeks and was hoping maybesomeone can help out a little bit.Synopsis:This SQL agent job contains code to perform a full database backup withverification and is writing to a local disk array. I typically also usesome code for reporting - declaring variables and inserting them intoa linked server database that I use to monitor all my database backups.I have tested and used the code repeatedly and am confident it works.I have ran the code through Query Analyzer and it completes withsuccess.I have removed reporting code & used only the backup statement & itfails.I have 4 other Agent jobs doing other various tasks that function asexpected.I have tried deleting & recreating the job & it still fails.When I enable logging the application log has only one entry for SQLAgent:Event Type:WarningEvent Source:SQLSERVERAGENTEvent Category:Job EngineEvent ID:208Date:1/4/2005Time:9:36:00 AMUser:N/AComputer:ComputerNameDescription:SQL Server Scheduled Job 'DBName Full DB Backup'(0xA4B14FB5A5DE964B8340423E4AC4B67B) - Status: Failed - Invoked on:2005-01-04 09:36:00 - Message: The job failed. The Job was invoked byUser domainUserName. The last step to run was step 1 (Step 1).Any help or ideas would be greatly appreciated. I'm racking my brainhere and for some reason just not able to think of what the problem is.ChaddJoin Bytes!
View 9 Replies
View Related
Nov 11, 2014
I am using sql server 2008 version and invoking the stored procedure using unix script. I want to know the procedure of killing the stored procedure in sql server.
If I kill -9 the unix script will it also terminate the process at the SQL server. When I executed the kill -9 PID in unix and ran the command exec sp_who2 it showed me only one sessionid and status as runnable - which means waiting for resources. BUt I am not sure whether it was the one which was triggered through unix.
My SP is executing in loop thereby is there any way I can avoid going into infinite loop?
View 3 Replies
View Related
Jan 16, 2008
Hi. I was wondering if there is such thing in MSSQL 2005? Not the one in SSIS.
Any feedback will be greatly appreciated.
Thanks,
Rick..
View 11 Replies
View Related
Jan 15, 2008
Hello, the following code works perfectly in SQL Server 2000 and SQL Server 2005 Express over WinXP but when run against an instance of SL Server2005 Express over Win2003Server, the first time Command.Execute is invoked returns no error (even though no action seems to be take by the server), subsequent calls return the error -2147217900 couldn't find prepared instruction with identifer -1 (message may vary, it is a translation from may locale)
Any ideas?
Thanks
Code Block
Public Sub Insert_Alarm(sIP As String, nAlarm As Long)
Static cmdInsert As ADODB.Command
Static Initialized As Boolean
On Error GoTo ErrorHndl
If Not Initialized Then
Set cmdInsert = New ADODB.Command
Set cmdInsert.ActiveConnection = db
cmdInsert.Parameters.Append cmdInsert.CreateParameter("IP", adVarChar, adParamInput, Len(sIP), sIP)
cmdInsert.Parameters.Append cmdInsert.CreateParameter("Alarm", adInteger, adParamInput, , nAlarm)
cmdInsert.CommandText = "insert into ALARMS(date_time,ip,alarm,status) values (getdate(),?,?,1)"
cmdInsert.CommandType = adCmdText
cmdInsert.Prepared = True
Initialized = True
End If
cmdInsert.Parameters(0).value = sIP
cmdInsert.Parameters(1).value = nAlarm
cmdInsert.Execute
Exit Sub
ErrorHndl:
...
End Sub
View 4 Replies
View Related
Mar 23, 2007
One of my database (name XYZ) shows suspect status in EM but when i try to dig further by running below query i get only "OK" ( see query)
SELECT [name],status, case status when (status & 32) then 'Loading'
when (status & 32) then 'Loading'
when (status & 64) then 'Pre Recovery'
when (status & 128) then 'Recovering'
when (status & 256) then 'Not recoverd'
when (status & 512) then ' Offline'
when (status & 1024) then ' Single user'
when (status & 1024) then ' Read only'
when (status & 32768) then ' Emergency Mode' else 'OK' end as status
FROM master.dbo.sysdatabases
WHERE [name] NOT IN ('distribution', 'tempdb', 'model','Pubs','Northwind')
also i run this
select * from sysdatabases where databaseproperty(name,N'IsSuspect') <> 1
and here also i get all the database including "XYZ"...i guess if "XYZ" is suspect the resultset should not be including "XYZ"
Why if the EM shows suspect status FOR "XYZ" DATABASE it should come up when i check status column in sysdatabases table?
View 2 Replies
View Related
Jul 16, 2014
I have a cluster using Always on on 2012 and i have set up a Witness file share which losts connectivity the other day and a failover was invoked.
Is there a threshold i can change so that the cluster can try a couple of more times to connect before it fails over ?
View 3 Replies
View Related
Jan 4, 2008
I'm trying to do something that should be simple. I want to use a copy database task and make it generic so we can call on it from and application which would pass the database names and file locations.
Any examples or documention would be helpful.
The expression edit that is invoked when you click on the ... only allows you to select databasedetails as the object however databasedetails is a collection and I have several properties in that collection that I need to assign values to via variables. I'm still lost and don't know how to enter the expression so that I can set the properties to the values in the variables. In addition the databasedetials collection has a collection which is the databasefiles collection.
Can you show me how to do this? It really is not clear how to assign the values from the variables to the properties in the collection since the editor does not expose the properties with in the property databasedetails since it is a collection.
so How do you enter and expression to set the properties of databasedetails and databasefiles?
DatabaseDetails.DatabaseName?
DatabaseDetails.DatabaseDestinationName?
DatabaseDetails.DatabaseFiles.0.DestinationFilePath?
DatabaseDetails.DatabaseFile.0.SourceFilePath?
DatabaseDetails.DatabaseFile.0.SourceShareFilePath?
DatabaseDetails.DatabaseFiles.1.DestinationFilePath?
DatabaseDetails.DatabaseFile.1.SourceFilePath?
DatabaseDetails.DatabaseFile.1.SourceShareFilePath?
View 6 Replies
View Related
Nov 18, 2005
I'm trying to set up Service Broker Services on SQL 2005 x86. I've got two services set up, and a stored procedure associated with one of them.
View 3 Replies
View Related
Jan 18, 2007
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies
View Related
Jul 25, 2014
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
View 1 Replies
View Related
Mar 9, 2000
Hello,everyone!!
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000
rows) But when I execute in the text mode, it takes about 0.40 seconds!!
Why is this difference?
Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!)
Why is it so slow on the text mode & relatively faster in the grid mode?
Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Rgds,
Adie
View 1 Replies
View Related
Jan 15, 2008
This is the first time I've used SQL Server Integration Services, and I have it installed with SP2 applied on my local machine. I have created a Package, and dropped a Message Queue Task on it. I have pointed the Message Queue Connection Manager at a private queue on my machine. I have set the "Message" property to "Send message", I have changed the message type to "String Message" and entered "Test string" into the StringMessage property. When I execute the package (by clicking the "Start debugging" button on the toolbar), I get the following error message in the Execution Results:
[Message Queue Task] Error: An error occurred with the following error message: "The ServicedComponent being invoked is not correctly configured (Use regsvcs to re-register).".
There is no more diagnostic data that I can see in the Execution Results. Can anyone please explain to me how I can get this working?
Thanks!
Bryan
View 12 Replies
View Related
Mar 26, 2005
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.'
Can someone say anything about fibe mode?I am appreciated for it.:)
View 3 Replies
View Related
Jul 16, 2007
Hi,
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
Thanks very much.
View 1 Replies
View Related
