Swap Rows For Columns In A Table
May 12, 2008
have the following table:
RecordKey MonthYear SD1 SD2 SD3
1 Jan 2008 6 AA 0
2 Feb 2008 10 BB 3
3 Mar 2008 12 CC 8
etc....
I need to transform it to this:
1 2 3
Jan 2008 Feb 2008 Mar 2008
6 10 12
AA BB CC
0 3 8
Can this be done automatically in SQL?
View 3 Replies
ADVERTISEMENT
May 19, 2005
I need to swap two rows in a table so that i can give the user a choice to move the row data up and down. The top and bottom row values may not be in the serial order. I am using MS Sql 2000. Is there any way to do that or its really difficult big process. I really stuck with this problem can you help me out, please friends.. Your help will greatly appreciated..
Thank you very much
View 3 Replies
View Related
Sep 24, 2007
I have a table named tbOrders. I want to swap the data between 2 of its columns named OrderNumber and CaseNumber.
Both the columns are varchar datatype. How can i swap the data between the two columns?
View 5 Replies
View Related
Sep 10, 2015
I am a newbie to Sql server and i am having a task where my current table with always two rows existing and ID column as primary key looks like below:
ID PlateNo Type Image Name
27 455 User img1.jpg
32 542 Alternative img2.jpg
And i want a sql query to modify my table so that the data should be like as shown below:
ID PlateNo Type Image Name
27 542 Alternative img2.jpg
32 455 User img1.jpg
View 8 Replies
View Related
Apr 30, 2004
Ok .. a challenge ...
How do you swap two columns based on some condition without using a cursor ( I mean a set based solution).
View 12 Replies
View Related
Jun 12, 2015
I need swapping values in rows of tables based on primary.
I will explain my scenario with the below example.
ID Name Value
--- -------- --------
1 name1 202
2 name1 203
3 name2 203
4 name2 202
5 name3 204
In the above example, I want to swap Value 202 and 203 but its not straight forward. I want to swap in a way that, I need to group by Name column and check if 203 comes first in the group then swap else don't.
In the above example, I need to swap the values for name2 but not for name1. Below query is performing a straight forward swap.
UPDATE TblTest
SET Value
=
CASE
WHEN
Value
=202
THEN203
ELSE202
END
WHERE
Valuein(202,203)
View 10 Replies
View Related
Sep 19, 2007
Hi,
I have two tables
Table Source
{
category varchar(20),
LastUpdate datetime
}
Table Destination
{
SubjectId varchar(20),
SubjectDate datetime,
category varchar(20),
LastUpdate datetime
}
Please note that the number columns are different in each table.
I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table.
And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.
Is there anyway to bulk insert into these columns.
Your quick response will be appreciated
~Mohan Babu
View 2 Replies
View Related
Feb 21, 2005
Hi guys,
I have a SQL Server 2000 table that contains a Year field and another table containing Products.
The Year table contains only a year field.
The Product table contains ProductId, Date, Quantity.
I'm trying to construct a query such that I can view the Quantity of Products by Year (derived from the Year table).
ie.
If the Year table contains the rows 2003, 2004 and 2005, the resultant query would produce the output: -
PId 2003 2004 2005
50 3 6 7
51 4 2 6
52 8 0 3
Any ideas how I can achieve this?
Cheers in advance,
Rob
View 2 Replies
View Related
Oct 31, 2007
I have a table, Table1 with 3 columns as follows: colItemKey, colGrouping1, colGrouping2.
colItemKey is the primary key. Say colGrouping1 has 4 different types: Grp1A, Grp1B, Grp1C and Grp1D and colGrouping2 has 5 as follows: Grp2A, Grp2B, Grp2C, Grp2D and Grp2E. How do I setup my select so that the result set is as follows:
Grp2A Grp2B Grp2C Grp2D Grp2E
Grp1A nnn nnn nnn nnn nnn
Grp1B nnn nnn nnn nnn nnn
Grp1C nnn nnn nnn nnn nnn
Grp1D nnn nnn nnn nnn nnn
View 2 Replies
View Related
Mar 7, 2008
i want to convert the rows of one table to be the column of another table in run time......i have two tables one having student id and name and in another table there are student id, marks and subject as english. hindi and maths in rows...i want to make another a third table which contains student id , name , marks as english, hindi, maths as the column....tried a lot but didnt get the right way...do we have to do it through Join or is there some other technique by which we can solve the query........i dont know wheather i am really informative or not..but am sitting online if incase you wanna know something else even..........
View 4 Replies
View Related
May 14, 2014
I have a table with this info:
NrCard numberPersonAuto123456789101112
11111111111111111111User1VW Jetta6,46,46,46,45,825,825,825,825,825,825,826,4
22222222222222222222User2Honda CR-V 13,2113,2113,2112,0112,0112,0112,0112,0112,0112,0113,2113,21
How I can get this result:
NrCard numberPersonAutomonthvalue
11111111111111111111User1VW Jetta16,4
11111111111111111111User1VW Jetta26,4
11111111111111111111User1VW Jetta36,4
11111111111111111111User1VW Jetta45,82
11111111111111111111User1VW Jetta55,82
11111111111111111111User1VW Jetta65,82
[code]....
Should I use unpivot or pivot?
View 2 Replies
View Related
Apr 3, 2013
I have a table imported from excel(5 var fix and 5 val fix) like:
Var1 val1 var2 val2 var3 val3 var4 val4 var5 val5
Color Red Size 4 Height 2inch NULL NULL NULL NULL
Color Red Size 5 Height 2inch NULL NULL Length 1 cm
Color Red Size 4 Height 3inch NULL NULL NULL
Color Black Size 6 Height 1inch NULL NULL NULL NULL
I need the output as
Var --- Val
Color --- Red,Black
Size --- 4,5,6
Height 1inch,2inch,3inch
Length 1 cm
Var or val can be either NULL or white space. I cannot use a function.
View 5 Replies
View Related
Mar 2, 2007
IF (SELECT OBJECT_ID('t1')) IS NOT NULLDROP TABLE t1GOCREATE TABLE t1 (c1 INT, c2 INT)DECLARE @n INTSET @n = 1WHILE @n <= 454BEGININSERT INTO t1 VALUES (@n, @n)SET @n = @n + 1ENDSELECT name, indid, CASE indidWHEN 0 THEN 'Table'WHEN 1 THEN 'Clustered Index'ELSE 'Nonclustered Index'END AS Type,dpages, rowcntFROM sysindexesWHERE id = OBJECT_ID('T1')name indid Type dpages rowcnt---- ----- ---- ------ ------NULL 0 Table 2 454I have a table containing 454 rows of two columnsof type INT with each being 4 bytesc1 int = 4 bytes+c2 int = 4 bytes=8 bytes per rowIf I entered 454 rows : 454 * 8 = 3,632 byteseach SQL Page is 8KB = 8 * 1024 bytes= 8,192 bytesa data page header takes the first 96 bytesleaving 8096 bytes for data and row offsets.Each record uses a row offset at the end of the pageconsisting of 2 bytes. 454 * 2 = 908 bytes.8096 - 3632 - 908 = 3,556 bytes. Should this befree data bytes?For a heap table, does SQL add an internal uniqueidentifiercolumn also? or my question is when does SQL adda uniqueidentifier? I am reading Inside SQL 2000 andtrying to understand a few things.A uniqueidentifier of 4 bytes gets added when a clustered indexexists but it is NOT a UNIQUE clustered index. AND onlyif duplicate record is added those two records only geta uniqueidentifier value.But in my example it's a heap table with no indexes. Evenon a heap table with no indexes a ROWID or Uniqueidentifierget added? Based on the INSERT statement above allvalues are unique.So what am I missing to understand why 453 rowsmake one data page to be used whereas 454 rowsmake two data pages to be used?Thank you
View 1 Replies
View Related
Aug 27, 2015
i have following table columns and i want to convert these all columns into row
SELECT [CASHINHAND]
,[CASHATBANK]
,[DEPOSITS]
,[ACCRECEVABLE]
,[SUNDRYDEBTORS]
,[LOANANDADVANCES]
[Code] ....
required output looks like
CASHINHAND 118950
CASHATBANK 200
DEPOSITS 3000
ACCRECEIVABLE
25000
View 3 Replies
View Related
Aug 21, 2015
I have a flat file with 13K columns which I need to load in a wide table.
The flat file does not even have column names and no datatypes defined.
How to load data in the wide table?
Also if i choose to load the data in 13 different work tables.
How do I define datatypes in the flatfile connection manager in SSIS for 13000 columns ?
View 5 Replies
View Related
Feb 3, 2015
I have this query:
SELECT TOP (100) PERCENT dbo.Filteredfs_franchise.fs_franchiseid AS FranchiseId, dbo.Filteredfs_franchise.fs_brandidname AS Brand,
dbo.Filteredfs_franchise.fs_franchisetypename AS [Franchise Type], dbo.Filteredfs_franchise.fs_franchisenumber AS [Franchise Number],
dbo.Filteredfs_franchise.fs_transactiontypename AS [Transaction Type], dbo.Filteredfs_franchise.fs_franchisestatusname AS [Status Code],
[Code] ....
I need to pivot this so I can get one row per franchiseID and multiple columns for [Franchisee Name Entity] and [Franchise Name Individual]. Each [Franchisee Name Entity] and [Franchise Name Individual] has associated percentage of ownership.
This has to be dynamic, because each FranchiseID can have anywhere from 1 to 12 respective owners and those can be any combination of of Entity and Individual. Please, see the attached example for Franchise Number 129 (that one would have 6 additional columns because there are 3 Individual owners with 1 respective Percentage of ownership).
The question is how do I PIVOT and preserve the percentage of ownership?
View 3 Replies
View Related
Jul 13, 2007
Hi
I have a dataset with 2 columns, a rownumber and a servername - eg
rownumber servername
1 server1
2 server2
....
15 server15
I want to display the servernames in a report so that you get 3 columns - eg
server1 | server2 | server3
server4 | server5 | server6
...
server13 | server14 | server15
I have tried using multiple tables and lists and filtering the data on each one but this then makes formating very hard - i either end up with a huge gap between columns or the columns overlap
I have also tried using a matrix control but cant find a way to do this.
Does anybody know an easy way to do this? The data comes from sql 2005 so i can use a pivot clause on the dataset if somebody knows a way to do it this way. The reporting service is also RS2005
Thanks
Anthony
View 1 Replies
View Related
Feb 3, 2010
we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008.
We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns. The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
Is there any proper way to load this kind of files into the db table?
View 6 Replies
View Related
Dec 25, 2005
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
View 1 Replies
View Related
Aug 5, 2014
I managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
View 6 Replies
View Related
Jan 24, 2008
I have a report which is a list of items and I display everything about the item. It is great. My report table in the layout tab is simple. Header,Detail,Footer. Each Item has 65 columns. The number of items (rows) vary upon what you want to see. Example data.
Item#, Description, CaseSalePrice, Cost, BottleSalePrice, Discount
123, Grenadine, 100.00, 75.00, 15.50, 2.00
456, Lime Juice, 120.00, 81.00, 17.25, 2.00
There could be 1 item or 4000 items.
What I want to see is.
Item # - 123, 456
Description - Grenadine, Lime Juice
CaseSalePrice - 100.00, 120.00
Cost - 75.00, 81.00
BottleSalePrice - 15.50, 17.25
Discount - 2.00, 2.00
What I am actually doing is running this the top example and saving to excel. Then copying the sheet. Creating a new sheet then doing a paste special transpose and this gives the users what they want to see.
I want to grab that table object in the report layout tab and twist it 90degrees so the header is on the left, detail is in the middle and the footer is on the right. It would be perfect.
The dynamic column need is really the problem here. I never know how many items will be in the report. They all have the same basic information like description and pricing.
I am all out of creative ideas, any help would be appreciated.
View 6 Replies
View Related
Sep 24, 2007
Hi
I want to enter rows into a table having more number of columns
For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?
Suppose i am having my data in .txt file (or ) in .xls
( SQL Server 2005)
View 1 Replies
View Related
Feb 12, 2015
I have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I need results for each parent like this
ParentID, LastName, FirstName, [Kid1Name,Kid2Name,Kid3Name], [Kid1Age,Kid2Age,Kid3Age],[kid1grade,Kid2grade,Kid3grade],[kid1gender,Kid2gender,Kid3gender]
View 1 Replies
View Related
Jul 22, 2015
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
View 4 Replies
View Related
Jun 27, 2006
Hi,
I'm pretty new to SQL and certainly new to SQL Server, so this is no doubt a simple question, but how can I take a row of data (say row 117) and swap it with another specified row of data? I know it sounds odd, but the key for each row is automatically generated so I don't want to mess with that, so I just want to swap the other fields.
Here's an example of what I mean:
----------------------------------------------
ID | headline | content | newstype | date |
----------------------------------------------
117 | test | asdfgasd| industry | 06/06|
118 | test2 | adsfg as| company | 06/06|
----------------------------------------------
What i've discovered is that the order of data in the rows isn't correct, so I want to maintain the ID fields seeing as they're in numeric order, but then use that ID to grab the rest of the row (117 for example) and replace the data for 118 with 117's data. Then do the same with 118's original data....
I need to do this because all the related rows in my table were posted on the same date, so other than that they appear on screen based on where they appear in the table, which doesn't match what the client wants...
Sorry for the long post, but as a beginner with SQL I wanted to make sure I made sense!
View 6 Replies
View Related
Feb 3, 2008
hi, we have got a new server at work running SBS 2003. the old server was SBS 2000 and it has a database on it. Both are running the SQL server program. Can anyone give me instructions to transfer these over (i have no idea how). i realise this has probably been asked before but i dont have the time to search so if someone could link a thread with instructions that would be good. cheers.
View 2 Replies
View Related
Jul 20, 2005
What is a good method/mechanism to swap the position of multiplecolumns?For instance, tblXZY has the followings columns and respectivepositions:tblXZY======xyzUUID 1fn 2ln 3phone 4email 5city 6state 7....Now, I need to make city as 2 and state as 3. BTW, the tblXYZ tablehas data there. Copy/select all the data into a new table withdesired column position would require constraints re-mapping etc.,which seems quite a bit hassle.Thanks.
View 6 Replies
View Related
Oct 30, 2006
I have setup logshipping in sql 2005. i have a primary and secondary server only.
Suppose for maintenace i bring primary down. . i have to manually bring the secondary server online. usnig restore databse with restore.
1) so far so good. But what now. How can i re-sync the old primary with the new primary?
2) can i return the original secondary back to standby mode so that the primary can resume its role and the log shipping process proceeds.
View 5 Replies
View Related
May 14, 2008
please need rescue- complex update logic
this is my table
1
2
3
4
5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
7
8
9
G
H
I
J
K
L
M
N
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
A
B
C
C
E
Y
I
O
W
Y
P
i need to update for example the eployee 1111 with employee 3333
but with swap ( take the value of employee 1111 in field- fld2,fld22,fld222 and swap value between employee 3333
in field- fld2,fld22,fld222 )
Code Snippet
---update eployee 1111 with employee 3333
-so
if i put the value 2
than ------------------ swap value between 2 employee
set empid1= 1111
set empid2=3333
value_swap=2
if value_swap=2
than
update fld2,fld22,fld222
with fld2,fld22,fld222
------------------- take the value of employee 1111 in field- fld2,fld22,fld222 and swap value between employee 3333
--------------------in field- fld2,fld22,fld222
value_swap
=1
=2
=3
=4
=5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
A
B
C
G
H
I
J
K
L
M
N
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
7
8
9
C
E
Y
I
O
W
Y
P
Code Snippet
---update eployee 2222 with employee 1111
-so
if i put the value 5
than ------------------ swap value between 2 employees
set empid1= 1111
set empid2=2222
value_swap=5
if value_swap=5
than
update fld5,fld55,fld555
with fld5,fld55,fld555
------------------- take the value of employee 1111 in field- fld5,fld55,fld555 and swap value between employee 3333
--------------------in field- fld5,fld55,fld555
=1
=2
=3
=4
=5
EMPID
fld1
fld11
fld111
fld2
fld22
fld222
fld3
fld33
fld4
fld44
fld444
fld5
fld55
fld555
1111
A
B
C
7
8
9
G
H
I
J
K
W
Y
P
2222
N
M
L
K
J
I
H
G
F
E
D
C
B
A
3333
1
2
3
A
B
C
C
E
Y
I
O
L
M
N
TNX FOR ALL THE HELP I GET IN THIS Forum
View 7 Replies
View Related
Oct 9, 2015
I've 2 measures that I would like to swap according to which member in a dimension are selected by the user:Ex.
[Measure].[A]
[Measure].[B]
Dimension called TEMP with 2 members (HOT and COLD).So if the user choose HOT it should show [Measure].[A] and if the user choose COLD it should show [Measure].[B]If the dimension is not included in the analysis by the user or if no dimension attribute are choosed then it should default to [Measure].[A].How to do that as Calculated Script in the SSAS cube ?
View 3 Replies
View Related
Apr 29, 2015
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
View 14 Replies
View Related
May 26, 2015
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
View 4 Replies
View Related
Jul 20, 2005
We are hosting a 140 GB database on SQL Server Version 7 and Windows2000 Advanced Server on an 8-cpu box connected to a 15K rpm RAID 5SAN, with 4 GB of RAM (only 2 GB of which seem to be visible to theOS) and a 4 GB swap file. (The PeopleSoft CIS application will notpermit us to upgrade to SQL 2K.) We recently upgraded the server from4 to 8 cpus and the SAN disks from 10K to 15K drives. But we stillhave heavy SAN disk usage, sometimes at 100%, and read queues oftenaveraging 4 and peaking at 12.The CPUs are loaded at only 20-50%. (The politics are such that it iseasier to throw hardware at the problems.)We are looking into archiving, converting from RAID 5 to RAID 10, andat splitting the mdf file into several file groups in an attempt toget more disk heads into play. (We are also looking at rewriting theapplication to reduce the read volume and frequency.) Does anyone haveany other ideas?Incidentally, does swapfile get used when the physical memory equalsthe OS maximum? If the OS can only see 2 GB and we have 2 GB (actually4 GB) of memory, is the 4GB local swap file on the C drive unused?Thanks in advance for any assistance.
View 1 Replies
View Related
